Replacement clock spring (rotary contact / spiral cable) designed for Citroën and Peugeot steering systems. This unit restores the electrical link between the steering wheel and vehicle electronics, including the driver airbag circuit, horn and steering wheel radio/controls. Frequently searched under product codes 9635682680 and 4112CP, it is a common spare part for Berlingo I, Partner I, Xsara, Xsara Picasso and Peugeot 306 models. Ideal for professional mechanics and experienced DIYers who need a direct-fit solution to eliminate faults such as airbag warning lights, non-functional horn or inoperative steering wheel buttons.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Berlingo I; Partner I; Xsara; Xsara Picasso; Peugeot 306
• Product Codes: 9635682680, 4112CP
• Other Numbers: NFP

Function And Symptoms

The clock spring provides continuous electrical continuity between stationary vehicle wiring and rotating steering wheel components. It transmits signals and power for the driver airbag, horn and steering wheel-mounted controls (radio, phone buttons, etc.). Typical failure symptoms include persistent airbag warning lamp, loss of horn function, intermittent or permanent failure of steering wheel buttons, and occasionally rubbing or clicking noises behind the steering wheel.

How The Part Is Replaced

1. Disconnect the negative battery terminal and wait at least 10 minutes to allow the Supplemental Restraint System to discharge.
2. Center the front wheels and the steering wheel. Mark the steering wheel position relative to the shaft to ensure correct re-alignment.
3. Remove the airbag module following manufacturer procedures and safety rules. Disconnect airbag and clock spring connectors carefully.
4. Remove the steering wheel (a steering wheel puller may be required) and unfasten the clock spring retaining screws/clips.
5. Fit the replacement clock spring in its neutral (centered) position. Do not rotate the unit while it is uninstalled. Reconnect all electrical connectors and reassemble in reverse order.
6. Reconnect the battery and verify system status. Torque the steering wheel retaining nut to the manufacturer specified value.

Installation Recommendations

• Always Disconnect Battery Before Work: Disconnect the negative terminal and wait to avoid accidental airbag deployment.
• Center The Clock Spring: Ensure the new clock spring is in the centered (neutral) position before installation to prevent cable damage.
• Use Correct Tools: Torx sockets, steering wheel puller and torque wrench are commonly required.
• Observe Connector Latches: Make sure airbag and signal connectors are fully engaged and secured.
• If Unsure, Seek Professional Support: Airbag work involves safety risks—proceed only if experienced with SRS systems.

Why This Part Fails Most Often

• Wear And Fatigue Of The Ribbon Cable: Repeated steering rotations eventually cause the internal flex ribbon to crack or break.
• Over-Rotation Or Misalignment: Incorrect installation or forcing the steering beyond physical stops can damage the spiral cable.
• Corrosion And Dirt Ingress: Moisture or contaminants can accelerate electrical contact failure.
• Damage From Airbag Deployment Or Previous Repairs: Impact or poor previous repair work can deform or break the unit.

Search By Part Number: For quick identification use 9635682680 or 4112CP. The unit listed fits common Citroën and Peugeot models as specified above and is aimed at restoring full function to the airbag, horn and steering wheel controls.

Usually encountered in models such as Berlingo I, Partner I, Xsara, and Xsara Picasso, the Rotary Contact may require replacement over time due to wear and tear, as consistent turning and movement can lead to degradation of the electrical connections. Symptoms indicating a failing Rotary Contact include intermittent horn operation, airbag warning lights, or malfunctioning radio controls.

Replacing the Rotary Contact is relatively straightforward, often involving the removal of the steering wheel and related components, making it a manageable task for both professional mechanics and DIY enthusiasts.

Technical Information

• Manufacturer: PSA
• Model: Citroën, Peugeot
• Product Codes: 9627442580, 4112X7
• Additional Numbers: NFP

Compatible with models such as the Peugeot 206, 406, Berlingo I, Partner I, Xsara, and Xsara Picasso, this part is an excellent choice for both professional mechanics and DIY enthusiasts looking to perform repairs on vehicles without a multiplex network.

Installation of the Wiper Control Switch is straightforward. Simply remove the steering column cover, disconnect the old switch, and install the new one, ensuring a snug fit. Regular checks are advisable, as wiper controls may wear out over time due to constant use, leading to malfunction or failure.

This switch is designed to meet or exceed manufacturer specifications, providing reliability and longevity. It is often searched by its product numbers 96247562ZL and 6239H6, ensuring that customers find the correct part for their vehicle.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: 96247562ZL 6239H6
• Product Codes: 96247562ZL, 6239H6
• Additional Numbers: 6239H6

This steering column switch bracket is a direct-fit replacement designed for Peugeot and Citroën vehicles that do not use a multiplex network. Supplied under OEM-related codes 9631626080, 61557024 and 6239K0, the bracket secures the stalks and switch modules under the steering wheel, restoring correct alignment and mechanical support. Ideal for professional workshops and DIY mechanics, this part helps eliminate play in the controls, prevents chafing of wiring and ensures reliable operation of indicators, wipers and cruise controls where applicable.

Technical Information

• Manufacturer: Stellantis (Peugeot / Citroën)
• Model: Peugeot 206, Peugeot 406, Peugeot 607, Berlingo I, Partner I, Xsara, Xsara Picasso
• Product Codes: 9631626080, 61557024, 6239K0
• Other Numbers: 61557024, 6239K0, 9631626080

Installation Recommendations

• Always Disconnect Battery Before Starting Work To Prevent Airbag Deployment And Short Circuits.
• Remove Steering Column Trim Panels Carefully To Access The Bracket; Keep Fasteners Organized For Reassembly.
• If Required, Remove The Steering Wheel Using Appropriate Tools And Follow Manufacturer Airbag Safety Procedures.
• Unplug Electrical Connectors And Note Their Positions; Replace The Bracket And Refit Fasteners To Specified Torque Where Available.
• Check Switch Functionality (Indicators, Wipers, Lights, Cruise) After Reassembly And Ensure Cables Are Not Pinched.

Why The Part Fails Most Often

• Plastic Fatigue And Breakage Of Mounting Tabs After Years Of Use Or Repeated Steering Column Disassembly.
• Mechanical Damage From Impact Or Accidents Causing Cracked Or Deformed Bracket.
• Wear From Excessive Play In The Column Leading To Stress On The Bracket And Attached Controls.
• Corrosion Or Embedded Debris Preventing Secure Fitment; Electrical Problems Are Usually Secondary To Mechanical Failure.

Notes For Purchase

Match The Product Codes (9631626080 / 61557024 / 6239K0) And Connector Layout To Your Vehicle When Selecting This Part. This Bracket Is Intended For Non-Multiplexed Electrical Systems Common On Earlier Peugeot And Citroën Models.

Why Choose This Part

Provides A Cost-Effective, Direct Replacement For Worn Or Broken Steering Column Switch Brackets. Designed For Easy Fitment By Experienced Technicians And Competent DIY Mechanics, It Restores Proper Switch Positioning And Reduces The Risk Of Wire Chafing Or Intermittent Control Operation.

Designed for compatibility with various models, including Berlingo I, Partner I, Xsara, and Xsara Picasso, this switch is a must-have for any car mechanic or DIY enthusiast working on these vehicles. Over time, rotary switches can wear out due to frequent use, resulting in malfunctioning controls. It is generally recommended to replace the switch if you notice any irregularities in the operation of the airbag, horn, or radio.

Technical Information

• Manufacturer: Citroën Peugeot
• Model: Berlingo I, Partner I, Xsara, Xsara Picasso
• Product Codes: 9641413580
• Additional Numbers: 4112EN, 4112EP

Compatibility: This radio control unit is compatible with a variety of Citroën and Peugeot models, including the Berlingo I, Partner I, Xsara, and Xsara Picasso. Its user-friendly design makes it an ideal choice for both professional mechanics and car enthusiasts who prefer to undertake their own repairs.

The function of this product is to allow drivers easy access to their audio controls without taking their hands off the wheel. Over time, steering wheel control units may wear out due to regular usage, electrical faults, or exposure to the elements. Replacing a failing unit is crucial to maintain your driving safety and enjoyment.

Technical Information

• Manufacturer: PSA CITROEN PEUGEOT
• Model: 4112CT
• Product Codes: NFP
• Other Numbers:

Replacing the wiper switch is straightforward and can often be done without professional assistance. The switch typically needs to be replaced if the wipers do not respond, or if they operate erratically, which is common due to wear and tear over time.

Functionally, this switch controls the wiper speed and intermittent settings, providing flexibility for various weather conditions. Regularly checking and replacing the wiper switch can enhance visibility and safety during driving.

Technical Information

• Manufacturer: PSA
• Model: Citroën Peugeot
• Product Codes: 96172873ZL, 623961
• Additional Numbers: NFP

Regular maintenance and replacement of the Light and Horn Control Switch are crucial, as wear and tear can lead to malfunctioning lights or inoperative horn systems, which may compromise your vehicle’s safety. Common signs that this component may need replacement include unresponsive lights or a horn that fails to actuate.

Technical Information

• Manufacturer: PSA
• Model: Citroën, Peugeot
• Product Codes: 96251931ZL, 625368
• Other Numbers: N/A

Over time, steering wheel control holders can wear out due to regular usage, leading to potential loss of control over essential functions. The replacement process is straightforward and can be done by both professional mechanics and DIY enthusiasts. It’s recommended to replace this component whenever signs of wear or malfunction appear.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Compatible with Peugeot 206, 406, Berlingo I, Partner I, Citroën Xsara, and Xsara Picasso
• Product Codes: 9624545180, 624126
• Additional Numbers: NFP

Commonly, light switch controls can wear out over time due to regular usage, leading to malfunctioning lights or a complete loss of control over the lighting functions. It’s advisable to inspect and replace the switch if you notice any inconsistencies, such as flickering lights or inability to switch on/off.

Installation of the Light Switch Control is relatively straightforward and can be performed with basic tools, making it an ideal choice for both professional mechanics and DIY enthusiasts. Always ensure that the vehicle is turned off and the battery disconnected before beginning installation to maintain safety.

Technical Information

• Manufacturer: Jaeger
• Model: Citroën, Peugeot
• Product Codes: 96307460ZL
• Additional Numbers: 625377