Description

This multifunction stalk/control block (COM2005 by Delphi) is a direct-fit component used on a range of Citroën and Peugeot models. It centralizes the steering-column switches for lighting, fog lamps, wipers, horn, cruise control and some radio functions, improving ergonomics and consolidating wiring compared with individual switches. Suitable for professional garages and DIY mechanics familiar with steering column disassembly. Common search terms: COM2005, Delphi stalk module, multifunction switch, Citroën stalk controls, Peugeot stalk controls, part numbers 96601446XT, 6242X3.

Technical Information

• Manufacturer: Delphi
• Model: COM2005
• Product Codes: 96601446XT, 96640423XT, 96660124XT, 98069813XT
• Additional Numbers: 6242X3, 6242GF, 6242VW

Fitment / Compatible Models

Typical compatibility includes (but is not necessarily limited to): Citroën Berlingo II, Citroën Berlingo III, Citroën C2, Citroën C3 (I and II), DS3, Peugeot Partner II, Peugeot Partner III, and related vehicles using the COM2005 platform. Always verify the part number against the vehicle’s original part marking before installation.

Installation

• Disconnect the negative battery terminal before any work to avoid short circuits and airbag deployment.
• Remove steering wheel trim and, if required, the airbag module following the vehicle manufacturer’s safety procedures.
• Unscrew/remove steering column covers to access the COM2005 module and its connectors.
• Unplug electrical connectors and release any retaining clips. If the radio/steering controls are separate, transfer the required control stalk or switch to the new unit as noted in the original description.
• Fit the replacement unit, reconnect all plugs and reassemble covers and steering wheel trim. Reconnect the battery and verify all functions: lights, fog lights, wipers, horn, cruise control and radio controls.
• If any function is inactive or intermittent after installation, check connector seating, wiring continuity and fuses before considering replacement.

Why The Part Most Commonly Fails

• Mechanical Wear: Frequent use of stalks causes switches and plastic components to wear or break over time.
• Electrical Contact Degradation: Oxidation or pitting of contacts can lead to intermittent operation of lights, wipers or horn.
• Water Ingress And Corrosion: Moisture reaching connectors or the module accelerates failures.
• Connector Or Harness Damage: Faulty wiring or damaged plugs from previous repairs or accidents causes loss of function.
• Internal Electronic Faults: Component failure on the COM2005 board (e.g., failed relays or semiconductors) can disable multiple functions.

Recommendations For Installation

• Perform installation in a dry, well-lit workshop with appropriate tools. Avoid forcing plastic clips to prevent breakage.
• Always follow the vehicle manufacturer’s disassembly sequence for steering column and airbag components.
• Inspect mating connectors and wiring harness for corrosion or damage and repair as needed before fitting the unit.
• After installation, test all affected systems (lights, wipers, horn, cruise control, steering wheel/radio switches) on the road in a safe environment.
• If functions related to vehicle electronics remain inactive, diagnostic equipment capable of reading Citroën/Peugeot fault codes (e.g. DiagBox/Lexia) can help locate interaction issues in body modules or buses.

The VALEO COM2005 steering control stalk is specifically designed for Peugeot models 207 and 308, but it also fits several other models such as Citroën Berlingo III, Expert III, and others. Replacing this component is relatively easy, and you can do it yourself or with the help of a professional if you are not experienced in automotive mechanics.

Technical Information:
Manufacturer: VALEO
Model: Peugeot 207, Peugeot 308, Citroën Berlingo III, Expert III, Jumpy III, Partner III
Product Codes: 96661296XT, 6242YL

Key components such as steering control stalks are crucial for the proper functionality and safety of your vehicle. This specific model has been validated to meet quality and functionality requirements. Remember that even used auto parts can provide excellent performance and reliability if properly maintained and installed.

If you are looking for reliable replacement parts for your Citroën or Peugeot, these original Delphi Comevo switches ensure seamless compatibility and enhanced ease of use. Designed to provide convenient control of multiple functions from beneath the steering wheel, they improve driver comfort and safety.

Technical Information:

Manufacturer: Delphi Comevo
Models: Citroën C3 II, DS3, Peugeot Expert III, Citroën Jumpy III, Peugeot Partner II and III
Product Codes: 98094483ZD, 98262556ZD
Additional Numbers: Cruise Control Switch 98035106ZD (available separately)

These switches are highly sought after due to their versatility and straightforward installation, requiring no special tools. This makes them ideal for professional mechanics as well as car enthusiasts performing self-repairs. Their robust construction ensures long-term reliability and resistance to wear.

Users appreciate that these switches are engineered to withstand typical wear and tear, providing consistent performance without frequent replacements. To maintain optimal operation, regular inspection and maintenance of these components are recommended.

The cruise control switch enables drivers to maintain a steady speed without continuously pressing the accelerator pedal, significantly increasing driving comfort and safety on long journeys. Proper functioning of this switch helps optimize fuel consumption and reduce driver fatigue.

Technical Information

• Manufacturer: PSA Peugeot Citroën
• Model: Citroën C3 III, with possible compatibility across various Peugeot models
• Product Codes: 98035106ZD
• Additional Numbers: The code may appear under different variants, but the core designation remains consistent.

Replacing the cruise control switch typically requires no special tools and can be performed during routine vehicle maintenance. However, for guaranteed proper operation and safety, professional installation or service center assistance is recommended.

This part serves as a direct replacement for original switches that may fail over time due to wear or internal damage. Prior to sale, each unit is thoroughly inspected to ensure full functionality and long service life.

For detailed compatibility information and installation support, please contact our customer service. We are committed to providing all the necessary guidance for a seamless replacement experience and optimal use of this component in your vehicle.

High-Quality Delphi COMEV3 Steering Column Switch Assembly Designed For Citroën And Peugeot Vehicles. This multifunction stalk unit Controls Indicators, Headlights, Fog Lamps, The Trip Computer, Front And Rear Wipers And The Horn. Engineered For Workshop Use And DIY Repairs, The Switch Offers Direct Replacement For Vehicles Using The Listed Part References And Restores Full Steering Column Functionality Without Extensive Modifications.

Compatibility And Fitment

Commonly Compatible With The Following Models (Depending On Vehicle Specification):

• Citroën Berlingo B9
• Citroën C3 Picasso
• Citroën Jumpy / Peugeot Expert III / Jumpy III (Selected Versions)
• Peugeot 308
• Peugeot Partner / Partner Tepee (Partner II / Partner III)

Search Keywords: Steering Column Switch, Stalk Switch, Delphi COMEV3, Citroën Switch, Peugeot Switch, 98062016XT, 12277902, 6242PN.

Technical Information

• Manufacturer: Delphi
• Model(s): Steering Column Switch Assembly (COMEV3)
• Product Codes: 98062016XT
• Other Numbers: 12277902, 6242PN

Replacement Procedure (General Guide)

• Disconnect The Negative Battery Terminal And Wait Several Minutes To Ensure Airbag System Is De-Energized.
• Remove Steering Column Trim Panels To Access The Switch Module.
• Follow Manufacturer Procedure For Airbag And Steering Wheel Removal If Required; Mark Steering Wheel Position Before Removal To Preserve Clockspring Alignment.
• Unplug Electrical Connectors From The Old Switch, Unscrew Fasteners Or Release Clips, Then Remove Unit.
• Install The New Switch In Reverse Order, Ensure Connectors Are Fully Seated And Wiring Is Free From Pinch Points.
• Reassemble Trim, Reconnect Battery, And Check All Functions: Indicators, Lights, Wipers, Horn, And Trip Computer Controls.
• If Steering Wheel Was Removed, Tighten To Manufacturer Torque Specification And Verify Clockspring Alignment Before Reconnecting The Airbag.

Installation Recommendations

• Always Disconnect The Battery Before Starting Work And Wait Long Enough For Capacitors And Airbag Systems To Discharge.
• Observe Proper Airbag Handling Procedures: Work Carefully Around The Airbag Module And Follow Vehicle Manufacturer Instructions.
• Do Not Rotate The Clockspring Excessively When The Steering Wheel Is Removed; Maintain The Original Centered Position.
• Inspect Wiring Plugs For Corrosion Or Damaged Pins And Repair As Needed To Prevent Intermittent Faults.
• After Installation, Verify All Functions On Road Test; Some Vehicles May Require Electronic Checks With Diagnostic Equipment To Confirm Proper System Status.

Most Common Failure Causes

• Wear Of Internal Contacts Due To High Usage (Indicators, Wipers, Horn).
• Ingress Of Moisture Or Dirt Causing Corrosion And Intermittent Electrical Connections.
• Mechanical Damage From Impact Or Excessive Force On Stalks.
• Broken Or Worn Switch Springs Leading To Sticky Or Unresponsive Controls.
• Faulty Connector Pins Or Wiring Harness Issues Causing Loss Of Specific Functions.

This Delphi COMEV3 Steering Column Switch Is A Practical Replacement For Workshops And DIY Enthusiasts Repairing Citroën And Peugeot Steering Controls. Fitment Is Typically Straightforward For Experienced Technicians; When In Doubt, Follow The Vehicle Manufacturer Service Manual For Safe Disassembly And Reassembly.

Product Overview

This is a used Delphi COM2005 multifunction control block (combination switch) for Citroën and Peugeot models. The unit integrates the steering-column controls for exterior lighting, fog lamps, wipers, horn, cruise control and radio/stalk functions. It is a direct-fit replacement for vehicles that use COM2005 type modules and is often searched by reference numbers, making it easy to find by part code.

Features And Functions

• Controls Headlights And Parking Lights
• Operates Front And Rear Wipers With Intermittent Settings
• Switches Fog Lights
• Horn Activation
• Integration With Cruise Control
• Radio Control Via Stalk (Radio Stalk Must Be Supplied Or Transferred From Original Unit)
• Centralized Steering-Column Interface To Reduce Wiring Complexity

Technical Information

• Manufacturer: Delphi
• Model: COM2005
• Product Codes: 96640423XT, 96660124XT, 98069813XT, 6242X3, 6242GF, 6242VW
• Additional Numbers: COM2005

Compatible Models

Commonly fitted to: Citroën Berlingo II / Berlingo III, Citroën C2, Citroën C3 I, Citroën C3 II, DS3, Peugeot Partner II / Partner III, Peugeot Partner Tepee. Verify fitment by comparing the part numbers listed above with the vehicle’s existing part.

Replacement Procedure (Summary)

Replacing the COM2005 unit typically requires the following steps: disconnect the battery; remove the steering wheel trim and column covers; unscrew and carefully remove the old unit; transfer the radio stalk if required; plug in the electrical connectors and secure the new unit; reassemble covers and reconnect the battery. After installation, some vehicles require coding or initialization for full functionality (see Installation And Coding – Important below).

Installation And Coding – Important

• The unit is used and is paired with the original vehicle (VIN/PIN/keys).
• Options for commissioning:
1. Cloning data from the old unit (EEPROM/Flash) – after cloning the unit is plug and play.
2. Virginization and subsequent initialization/telecoding via DiagBox (or online) + key adaptation.
• Recommended to be performed by a technician with PSA service equipment (DiagBox / Lexia / PP2000).
• Always disconnect the battery before removal/installation and follow the manufacturer’s procedure to avoid damaging the unit.

Recommendation For Installation

For a reliable replacement, perform the work in a dry, well-lit workspace. Use correct Torx or Phillips tools for trim and steering column screws. Protect the steering wheel and interior trim during work. After physical installation, verify all functions (lights, wipers, horn, cruise, radio controls) and check for stored fault codes. If any functions are missing or fault codes persist, coding or cloning may be required.

Most Common Failure Causes

Multifunction COM2005 units typically fail due to worn internal contacts from long-term mechanical use, moisture ingress or corrosion, electrical surges/short circuits, or failures in the stalk switches. Symptoms include intermittent or non-functioning lights, wipers that do not park or work intermittently, loss of horn or cruise control, and in some cases loss of radio stalk control if not transferred correctly. Regular exposure to moisture and contaminated connectors accelerates failure.

Why Choose This Unit

This COM2005 unit is a practical option for mechanics and competent DIYers seeking an economical repair path. Because many technicians and owners search by OE reference, the included product codes make it straightforward to identify compatibility. Ensure correct transfer of any stalk controls and be prepared to perform cloning or coding where required for plug-and-play operation.

Over time, switch controls can wear out due to frequent use, leading to malfunctions. Regular inspections and timely replacements are recommended to maintain vehicle safety and functionality. This part integrates seamlessly into your car’s electrical system and is essential for optimal operation.

Technical Information

• Manufacturer: Citroën Peugeot
• Model: 96662456XT 6242ZT
• Product Codes: 96662456XT
• Other Numbers: 6242ZT