High-quality replacement steering column stalks designed for Stellantis vehicles — ideal for professional workshops and skilled DIY mechanics. This COM2008P unit is commonly searched by part numbers 96759252XT and 6243C6, so listing those codes in your search will help you find the exact item quickly. The module restores full control of exterior lights, fog lamps, all wiper functions, turn signals, horn and on-board computer functions, ensuring safe and legal operation of the vehicle lighting and signaling systems.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C4 II, Peugeot 508, DS4, DS5
• Product Codes: 96759252XT
• Other Numbers: 6243C6, COM2008P

How To Replace

• Disconnect the negative battery terminal before any work to avoid electrical damage and airbag deployment.
• Remove upper and lower steering column covers to access the stalk assembly. On some models removal of the steering wheel and airbag module is required — follow manufacturer safety procedures when working with airbags.
• Unplug electrical connectors and release retaining clips holding the stalks in place.
• Fit the new stalk assembly, reconnect connectors and test all functions (lights, indicators, wipers, horn, trip computer) before reassembling covers.
• Reinstall components and reconnect the battery. Verify correct operation and check for any fault codes with a diagnostic tool if available.

Installation Recommendation

Work should be performed by a qualified technician or an experienced DIYer comfortable with steering column disassembly and airbag safety. Always follow the vehicle manufacturer’s repair manual, torque settings and safety instructions. After installation, confirm full functionality of indicators, wipers and horn. If the vehicle uses advanced multiplexing, a diagnostic scan may be necessary to clear historic faults — the physical replacement itself is usually straightforward but testing with a scan tool increases reliability.

Common Failure Reasons

• Wear of internal electrical contacts and carbon tracks from repeated use, causing intermittent or lost functions.
• Mechanical damage to stalk levers or retaining clips from impact or excessive force.
• Corrosion or moisture ingress affecting connectors and switch internals, especially after water leaks or aggressive cleaning.
• Electrical shorts or wiring faults in the column harness producing sporadic behavior or blown fuses.
• Accumulation of dirt and grime causing sticky or unreliable switches.

There is no fixed replacement interval — longevity depends on usage, environment and vehicle age. Symptoms that indicate replacement are intermittent lighting, non-functioning indicators or wipers, unresponsive horn, or error messages on the instrument cluster related to stalk functions.

This used COM2008 multifunction stalk assembly (part number 96773911ZD) is designed for Stellantis vehicles and provides reliable control of lighting, signaling and wiper functions directly from the steering column. Engineered to match OE mounting points and electrical connectors, it is a practical replacement for workshops and DIY mechanics looking to restore full functionality to the steering controls on compatible Peugeot and Citroën models. The unit operates headlamps, fog lamps, front and rear wipers, turn signals, horn and the vehicle trip computer inputs — all functions commonly integrated into the COM2008 module.

Key Benefits

Direct-fit design for quick replacement, restores full steering-column control functions, and carries the common OEM product code 96773911ZD and designation COM2008. Ideal for garages and self-repair enthusiasts who need a straightforward swap to fix intermittent or failed stalk functions.

Technical Information

• Manufacturer: Stellantis / Peugeot / Citroën
• Model: Peugeot 3008 I, Peugeot 5008 I, Citroën C4 II, DS4, DS5, Partner II
• Product Codes: 96773911ZD, COM2008
• Other Numbers: COM2008 (designation used in parts listings)

Compatibility And Fitment

Fits first-generation Peugeot 3008 and 5008 (T84) and several related platforms within the Stellantis parts family where COM2008 multifunction stalks are specified. Always verify that the connector style and mounting layout match the vehicle before installation.

Installation Recommendations

• Disconnect the battery before starting and allow capacitors to discharge to avoid airbag deployment or electrical damage.
• Remove the driver airbag and steering wheel following the vehicle manufacturer’s safety procedures. Mark steering wheel position to preserve alignment.
• Remove steering column shrouds to access the multifunction stalk unit, unplug electrical connectors and unfasten retaining screws or clips.
• Install the replacement unit, reconnect all connectors, reassemble covers and steering wheel, then reconnect the battery.
• After installation, verify all functions (indicators, wipers, lights, horn, trip computer inputs) and clear any stored fault codes with a diagnostic tool if necessary.
• If You Are Not Equipped With Proper Tools Or Lack Experience Handling Airbags/Clockspring, Have The Replacement Performed By A Professional.

Why This Part Commonly Fails

Multifunction stalks are subject to regular mechanical actuation and electrical switching. The most common failure modes include worn or pitted internal contacts, contamination or corrosion of connectors, broken plastic levers or detents, and intermittent electrical faults due to degraded flex circuits. Symptoms of failure are non-functioning indicators or wipers, intermittent operation, stuck stalks, horn not responding from the stalk, or erroneous warnings on the instrument cluster.

Practical Notes For Mechanics

When diagnosing, check connector pins for corrosion, measure continuity across the stalk switches where accessible, and inspect the steering column for foreign objects or water ingress that may have caused the failure. Replacing the stalk unit usually restores all functions, but ensure the clockspring (spiral cable) is not damaged during removal or reinstallation to avoid airbag and steering wheel control faults.

Description

This multifunction stalk/control block (COM2005 by Delphi) is a direct-fit component used on a range of Citroën and Peugeot models. It centralizes the steering-column switches for lighting, fog lamps, wipers, horn, cruise control and some radio functions, improving ergonomics and consolidating wiring compared with individual switches. Suitable for professional garages and DIY mechanics familiar with steering column disassembly. Common search terms: COM2005, Delphi stalk module, multifunction switch, Citroën stalk controls, Peugeot stalk controls, part numbers 96601446XT, 6242X3.

Technical Information

• Manufacturer: Delphi
• Model: COM2005
• Product Codes: 96601446XT, 96640423XT, 96660124XT, 98069813XT
• Additional Numbers: 6242X3, 6242GF, 6242VW

Fitment / Compatible Models

Typical compatibility includes (but is not necessarily limited to): Citroën Berlingo II, Citroën Berlingo III, Citroën C2, Citroën C3 (I and II), DS3, Peugeot Partner II, Peugeot Partner III, and related vehicles using the COM2005 platform. Always verify the part number against the vehicle’s original part marking before installation.

Installation

• Disconnect the negative battery terminal before any work to avoid short circuits and airbag deployment.
• Remove steering wheel trim and, if required, the airbag module following the vehicle manufacturer’s safety procedures.
• Unscrew/remove steering column covers to access the COM2005 module and its connectors.
• Unplug electrical connectors and release any retaining clips. If the radio/steering controls are separate, transfer the required control stalk or switch to the new unit as noted in the original description.
• Fit the replacement unit, reconnect all plugs and reassemble covers and steering wheel trim. Reconnect the battery and verify all functions: lights, fog lights, wipers, horn, cruise control and radio controls.
• If any function is inactive or intermittent after installation, check connector seating, wiring continuity and fuses before considering replacement.

Why The Part Most Commonly Fails

• Mechanical Wear: Frequent use of stalks causes switches and plastic components to wear or break over time.
• Electrical Contact Degradation: Oxidation or pitting of contacts can lead to intermittent operation of lights, wipers or horn.
• Water Ingress And Corrosion: Moisture reaching connectors or the module accelerates failures.
• Connector Or Harness Damage: Faulty wiring or damaged plugs from previous repairs or accidents causes loss of function.
• Internal Electronic Faults: Component failure on the COM2005 board (e.g., failed relays or semiconductors) can disable multiple functions.

Recommendations For Installation

• Perform installation in a dry, well-lit workshop with appropriate tools. Avoid forcing plastic clips to prevent breakage.
• Always follow the vehicle manufacturer’s disassembly sequence for steering column and airbag components.
• Inspect mating connectors and wiring harness for corrosion or damage and repair as needed before fitting the unit.
• After installation, test all affected systems (lights, wipers, horn, cruise control, steering wheel/radio switches) on the road in a safe environment.
• If functions related to vehicle electronics remain inactive, diagnostic equipment capable of reading Citroën/Peugeot fault codes (e.g. DiagBox/Lexia) can help locate interaction issues in body modules or buses.

This steering wheel control module is a direct-fit switch cluster designed for Citroën/Peugeot Group vehicles. It restores complete steering wheel button functionality — audio, phone and menu control inputs — and is ideal for professional workshops and DIY mechanics who search by part number. The module is a practical replacement for faded, damaged or intermittently working controls and keeps original steering wheel ergonomics and electrical interfaces.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model(s): Citroën C4 II, DS4, DS5, Peugeot 508, Partner II (as listed)
• Product Codes: 96720447ZD, 98094695ZD
• Additional Numbers: 96759249XT, 98000200ZD, 6243C4

Installation Recommendations

1. Disconnect the negative battery terminal and wait at least 10 minutes to disable the airbag system before starting work.
2. Remove the airbag module from the steering wheel following the vehicle manufacturer’s procedure.
3. Unscrew the retaining fasteners and carefully detach the steering wheel trim to access the switch module.
4. Disconnect electrical connectors and remove the old switch module. Take care with fragile plastic clips and ribbon cables.
5. Fit the replacement module, reconnect all plugs, and reassemble in reverse order. Ensure airbag and steering wheel fasteners are torqued to manufacturer specifications.
6. Reconnect the battery and verify full functionality of all steering wheel controls, voice/phone buttons and menu navigation.

Why This Part Fails Most Often

Steering wheel switch modules typically fail due to wear and mechanical damage rather than simple electrical aging. Common causes include worn contact pads from heavy use, broken or detached plastic/chrome trim (as in this unit), moisture ingress causing corrosion, short circuits after liquid spills, and physical damage from impacts or airbag deployment. Intermittent function can also be caused by connector issues or a faulty clock spring in the steering column, so inspect surrounding components when diagnosing.

Benefits of replacing this unit: restores factory control functionality, maintains resale value, and avoids more expensive electrical work if the problem is localized to the switch module. Because many buyers search by product number, the included codes help you confirm fitment quickly.

High-quality steering column stalk assembly COM2008 designed for Citroën and Peugeot models. This unit consolidates multiple controls into one compact module, restoring full functionality for lighting, wipers, indicators, horn and on-board computer commands. Ideal for professional garages and DIY mechanics who need a direct replacement part often searched by product codes (96759249XT, 98000200ZD, 6243C4, COM2008). Installing a correct stalk assembly returns intuitive multifunction control and eliminates intermittent faults such as stuck wipers, non-working indicators or inoperative horn.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C4 II, Peugeot 508, DS4, DS5
• Product Codes: 96759249XT, 98000200ZD
• Other Numbers: 6243C4, COM2008

Function And Benefits

• All-In-One Control: Combines headlight, fog light, wiper, indicator, horn and trip computer controls in a single stalk assembly.
• Direct Fit: Designed to match original mounting points and electrical connectors for the listed models, simplifying replacement.
• Restore Safety And Comfort: Replaces faulty or unreliable stalks that compromise signaling, visibility and driver information access.

Replacement Procedure

Basic replacement steps for competent mechanics:

• Disconnect The Battery: Always isolate the vehicle battery before beginning work to avoid short circuits and SRS/airbag system triggers.
• Remove Steering Column Covers: Unscrew and carefully separate upper and lower shrouds to access the stalk assembly.
• Disconnect Electrical Connectors: Unclip the module connectors gently to avoid damaging terminals.
• Remove Retaining Fasteners: Unscrew the mounting screws or clips holding the stalk assembly in place and extract the old unit.
• Fit New Unit: Position the replacement stalk, secure with original fasteners and reconnect all plugs.
• Function Test: Reconnect the battery and verify all functions (indicators, lights, wipers, horn, trip computer) before reassembling the covers.

Installation Recommendations

• Always Disconnect The Battery Before Work: Prevents electrical damage and accidental airbag deployment.
• Follow Manufacturer Torque And Assembly Procedures: Use correct fasteners and ensure connectors are fully engaged.
• Inspect Wiring And Connectors: Replace or clean corroded terminals to avoid recurring faults.
• Test All Functions Before Final Reassembly: Confirm operation of lights, wipers, horn and trip computer to avoid repeat disassembly.
• Use Proper Tools: Avoid excessive force on plastic clips and steering column components.

Most Common Failure Causes

• Mechanical Wear: Repeated use causes wear on internal contacts and switches, leading to intermittent or complete failure.
• Electrical Contact Corrosion: Moisture ingress or oxidized terminals create poor connections affecting multiple functions.
• Broken Stalk Or Internal Plastics: Physical damage from impact or misuse can break levers or internal guides.
• Short Circuits Or Wiring Damage: Chafed cables or previous repair faults can cause malfunctions or blown fuses.
• Accumulated Dirt And Debris: Impairs contact surfaces and switch movement, particularly on wiper and indicator mechanisms.

Notes For Professionals

This part is commonly identified by product codes 96759249XT and 98000200ZD (also referenced as 6243C4 / COM2008). Ensure physical match of connector shapes and mounting points when selecting replacements. For safety-critical tasks or when airbag components must be handled, follow manufacturer service instructions or have the fitment done by a qualified technician.

Warranty And Quality

Replacement of a defective steering column stalk restores original vehicle controls and improves safety. Verify part number fitment and inspect the unit on delivery for visible damage before installation.

Main product description

Original controls under the steering wheel (combined switch/lever) VALEO COM2008PV2-CEM00 for Citroën and Peugeot cars. OE/PSA number 98180645ZD. This is a used, fully functional part dismantled from a Peugeot 308 T9. The module provides control of the lights, fog lights, turn signals, horn, wipers (front and rear), cruise control and has preparation for controlling the car radio (need to add or transfer a separate controller/satellite depending on the equipment).

Main functions and features
– Controls: dipped/main beam, fog lights, turn signals, horn, front and rear wipers with spray
– Cruise control/speed limiter: lever for activation and adjustment (if the car is equipped)
– Preparation for car radio control: a separate controller can be remounted from the original module
– Original manufacturer: VALEO
– Type/designation: COM2008PV2-CEM00 (also known as COM2008 PV2)
– Condition: used, tested part; normal traces of use without affecting function

Technical information
– OE/PSA number: 98180645ZD (alternatively also listed as 98180645 ZD)
– Equipment variant: with cruise control, preparation for radio control
– Location: under the steering wheel, part of the steering column
– The compatibility of connectors and functional equipment must match your car and the original part

Compatibility
– Verified origin: Peugeot 308 T9
– Also often used on: selected versions of the Peugeot Partner II (B9) and related Citroën models
– Recommendation: before purchasing, always compare the part number 1:1 (98180645ZD) and the COM2008PV2 designation, or verify by VIN

Installation and service notes
– If you are replacing a part with the same number and equipment, the exchange is usually plug & play
– Telecoding/adaptation via diagnostics (BSI) and steering wheel angle sensor calibration may be required on some cars
– The car radio driver is a separate module – transfer it from the original part if it is not included
– When working on the steering column, always disconnect the battery and follow airbag safety procedures

Why choose an original used part?
– 100% original VALEO = correct compatibility and long service life
– Quick and economical repair without compromises in functionality
– Exact behavior of levers and switches as from the factory

Searched labels and keywords
– PSA CITROËN PEUGEOT 98180645ZD, 98180645 ZD
– VALEO COM2008, COM2008PV2, COM2008PV2-CEM00
– Controls under the steering wheel, combination switch, levers, light switch, turn signal lever, wiper lever, cruise control, radio control

Tip for checking compatibility
– The surest thing is to compare the label of your original module (part number and code COM2008) or send us the VIN – we will verify for you.

High-quality replacement COM2000 stalks designed for Citroën and Peugeot models provide reliable control of lighting, wipers and signaling functions. Perfect for professional workshops and DIY mechanics who want a direct-fit solution that restores full steering-column functionality. The unit is commonly sought by part number, so please check the listed product codes for quick identification. Ideal for vehicles where the original stalks show wear, intermittent contacts, or broken mechanical parts.

Key Features

• Direct-fit COM2000 steering column stalks for multiple Citroën and Peugeot models.
• Controls: Headlights, Fog Lamps, Front And Rear Wipers, Horn. Cruise Control And Radio Functions May Require Additional Components Or Transfer Of Existing Control.
• Durable electrical contacts designed for frequent switching and harsh in-cabin conditions.
• Commonly identified by OEM and aftermarket product codes for fast cross-referencing.

Compatible Models

Typically fitted to Citroën Berlingo, Citroën Xsara, Peugeot 206 and Peugeot Partner ranges (including Berlingo II / Partner II / Xsara variants). Use the product codes below to confirm exact fitment for a specific vehicle generation or trim.

Replacement Procedure

• Disconnect battery and follow manufacturer instructions for SRS/airbag safety before starting work.
• Remove steering column trim panels to access the stalk assembly; keep screws and clips organized for reassembly.
• Unplug electrical connectors from the old stalk unit and release any retaining clips or screws.
• Fit the new COM2000 stalk assembly, secure mechanically and reconnect the electrical plugs until they click.
• Reassemble trim, reconnect the battery and verify all functions: lights, indicators, wipers, horn and any transferred cruise/radio controls.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Steering Column Controls / COM2000 Stalks
• Product Codes: 96605638XT, 96787362XT, 624235
• Other Numbers: 6239AE, 6239CQ, 6242F0, COM2000

Installation Recommendations

• Always Disconnect The Battery Before Working On The Steering Column And Wait The Recommended Time For SRS Circuits To Discharge.
• Follow Manufacturer Procedures For Airbag Removal If Necessary; If Unsure, Have A Trained Technician Perform The Task.
• Ensure Connectors Are Clean And Free Of Corrosion; Lightly Inspect Contact Pins Before Reconnection.
• If Cruise Control Or Radio Functions Are Not Working After Swap, Check Whether The Function Requires Transferring The Original Control Module Or Additional Coding.

Most Common Failure Reasons

• Mechanical Wear: Frequent use causes switches and plastic levers to loosen or break over time.
• Electrical Contact Degradation: Oxidation, dirt and arcing lead to intermittent operation of lights, indicators or wipers.
• Moisture Ingress Or Corrosion: Exposure to humidity can corrode contacts and connectors inside the stalk assembly.
• Impact Or Physical Damage: Steering column impacts or rough handling during repairs can crack levers or damage internal mechanisms.
• Faulty Connectors Or Wiring: Problems in the vehicle harness or connectors can mimic stalk failure; inspect wiring before replacement.

This COM2000 stalk assembly is a practical replacement to restore steering-column switch functionality. Check the product codes listed above to match the correct unit to your vehicle model and configuration.

COM2000 levers drivers for Citroën and Peugeot with multiplex wiring. The module under the steering wheel brings together control of lights, fog lights, rudders, front wipers and horn; The equipment also supports cruise control and remote control of the car radio (the radio driver must be delivered or transferred from the original episode as needed). Thanks to the original design of the dog is ensured proper communication with the on -board network and the functionality of all relevant systems.

This combined switch is located on the steering wheel pillar. Typical manifestations of its wear are spontaneous flashing, ripples outages, non -functional wiper interruptions, occasional clampson malfunction or problem control of fog lights. The replacement is suitable for the symptoms mentioned or after mechanical damage to the levers.

Mounting tip: disconnect the battery before starting work and wait for the system discharge (due to the airbag). Then remove the steering columns, remove the airbag steering wheel according to the manufacturer’s procedures and release the switch from the lock. Carefully compare the connectors, equipment (fog lights, cruise control, radio control) and unit designation before assembling the new part. For some cars, it is necessary to re -install a separate car radio driver or cruise control lever from the original part.

technical information

• Manufacturer: PSA (Citroën/Peugeot), designation of the COM2000 module
• Model: Peugeot 206; Peugeot 307 I; Citroën Berlingo II; Peugeot Partner II
• Product codes: 96605695XT (OE)
• Other numbers: COM2000, crowd

Recommendations for selection: follow the code 96605695XT and compare physical design and equipment. The right choice of variant ensures trouble -free functioning of rudder, lights, wipers and additional functions such as cruise control and audio system control.

If you are looking for reliable and high-quality steering wheel drivers for the Citroën C-Crosser and Peugeot 4007, our range of used car parts is exactly for you. These drivers include functions for controlling lights, fog lights, front and rear wipers and turn signals, which is the basis for comfortable and safe driving.

Technical information:

• Manufacturer: PSA Citroen Peugeot
• Model: Citroën C-Crosser, Peugeot 4007
• Product codes: 86000A326, 6242AG, 6242al, 6242aj
• Other numbers: 1690037080, 164382280, 16136476080

These drivers are not only functional but also carefully tested and checked to meet all standards and requirements for trouble -free use. This ensures long -term satisfaction and safety in management.

The installation of these parts is relatively easy and can be done either at home with basic tools or in a specialist service. Thanks to their robust design and verified origin, they are the ideal solution for restoring the functions of your vehicle without having to invest in new parts.

Take the opportunity to get quality and proven car parts that will contribute to the safety and comfort of your ride. Do not hesitate to contact us with any questions, we will be happy to help you choose.