High-quality replacement steering column stalks designed for Stellantis vehicles — ideal for professional workshops and skilled DIY mechanics. This COM2008P unit is commonly searched by part numbers 96759252XT and 6243C6, so listing those codes in your search will help you find the exact item quickly. The module restores full control of exterior lights, fog lamps, all wiper functions, turn signals, horn and on-board computer functions, ensuring safe and legal operation of the vehicle lighting and signaling systems.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C4 II, Peugeot 508, DS4, DS5
• Product Codes: 96759252XT
• Other Numbers: 6243C6, COM2008P

How To Replace

• Disconnect the negative battery terminal before any work to avoid electrical damage and airbag deployment.
• Remove upper and lower steering column covers to access the stalk assembly. On some models removal of the steering wheel and airbag module is required — follow manufacturer safety procedures when working with airbags.
• Unplug electrical connectors and release retaining clips holding the stalks in place.
• Fit the new stalk assembly, reconnect connectors and test all functions (lights, indicators, wipers, horn, trip computer) before reassembling covers.
• Reinstall components and reconnect the battery. Verify correct operation and check for any fault codes with a diagnostic tool if available.

Installation Recommendation

Work should be performed by a qualified technician or an experienced DIYer comfortable with steering column disassembly and airbag safety. Always follow the vehicle manufacturer’s repair manual, torque settings and safety instructions. After installation, confirm full functionality of indicators, wipers and horn. If the vehicle uses advanced multiplexing, a diagnostic scan may be necessary to clear historic faults — the physical replacement itself is usually straightforward but testing with a scan tool increases reliability.

Common Failure Reasons

• Wear of internal electrical contacts and carbon tracks from repeated use, causing intermittent or lost functions.
• Mechanical damage to stalk levers or retaining clips from impact or excessive force.
• Corrosion or moisture ingress affecting connectors and switch internals, especially after water leaks or aggressive cleaning.
• Electrical shorts or wiring faults in the column harness producing sporadic behavior or blown fuses.
• Accumulation of dirt and grime causing sticky or unreliable switches.

There is no fixed replacement interval — longevity depends on usage, environment and vehicle age. Symptoms that indicate replacement are intermittent lighting, non-functioning indicators or wipers, unresponsive horn, or error messages on the instrument cluster related to stalk functions.

High-quality replacement steering column stalk assembly designed for Peugeot 307 and 308 vehicles, built around the DELPHI COM2005 control module. This unit manages lighting functions such as fog lamps, as well as front and rear wiper operations and the instrument cluster trip computer functions. Ideal for professional workshops and experienced DIY mechanics who need a reliable, direct-fit stalk set to restore full steering-column control. Common search terms and OE references included in the description improve findability: 96651589XT, 6242CR, 98069975XT, COM2005.

Technical Information

• Manufacturer: Delphi (OEM Supplier) / Stellantis Compatible
• Model: Peugeot 307, Peugeot 308
• Product Codes: 96651589XT, 6242CR, 98069975XT
• Additional Numbers: COM2005

How To Replace

1. Disconnect Battery Before Starting Work To Avoid Short Circuits And Airbag Deployment.
2. Remove Steering Wheel Trim And Airbag Module Following Manufacturer Procedure.
3. Unscrew Steering Column Covers To Access The Stalk Assembly.
4. Unplug Electrical Connectors And Release Retaining Clips Or Screws Holding The Stalks.
5. Fit The Replacement Stalk Assembly, Reconnect All Plugs And Secure Fasteners To Specified Torque.
6. Reassemble Column Covers, Refit Airbag And Steering Wheel, Reconnect Battery, And Test All Functions Thoroughly (Wipers, Fog Lamps, Trip Computer Functions).

Installation Recommendations

• Always Disconnect The Battery Before Removal Or Installation To Prevent Damage To Electronics And Airbag Systems.
• Follow Peugeot Manufacturer Procedures For Airbag And Steering Wheel Removal To Avoid Injury Or Component Damage.
• Check Connector Pins For Corrosion Or Bent Contacts And Clean Contacts If Necessary Before Reassembly.
• Ensure Proper Alignment Of The Stalks And Secure All Fasteners; Loose Mounting Can Cause Intermittent Faults.
• After Installation, Verify All Functions On The Vehicle Before Final Reassembly.

Reason Why The Part Most Often Fails

Stalk assemblies with integrated electronic modules like the DELPHI COM2005 commonly fail due to wear of mechanical contacts from frequent use, ingress of moisture causing corrosion on connectors or switch contacts, and internal plastic or spring breakage from mechanical stress. Intermittent operation of wipers, fog lights, or trip computer controls is typically caused by worn or oxidized switch contacts or damaged wiring in the column area.

Compatible With Workshop Use And DIY Repairs. Part Numbers And Module Designation Included For Easier Search And Identification: 96651589XT, 6242CR, 98069975XT, COM2005.

Product Description

High-quality Valeo steering column stalks designed for first-generation Citroën C4, C4 Picasso and C4 Grand Picasso. These multi-function stalks operate front and rear wipers, washer functions, fog lights and provide inputs to the trip computer and wiper sensor systems. Ideal for professional garages and experienced DIY mechanics who need a direct-fit replacement part often searched by product code.

Key Features

• Direct replacement for original stalk switches used on compatible Citroën models.
• Controls fog lights, front and rear wipers and washer jets.
• Provides signals for the wiper sensor and trip computer.
• Robust OEM-quality switch mechanism from Valeo for reliable operation.
• Commonly referenced by product numbers for fast lookup and fitting.

How It Is Replaced

Replacement is straightforward for a trained technician: disconnect the battery, remove the lower and upper steering column covers, unplug the electrical connector(s) to the stalk, unclip or unscrew the stalk from the column and install the new unit in reverse order. If removal of the steering wheel or airbag is required, follow manufacturer procedures and safety precautions—airbag handling should be performed by trained personnel.

Installation Recommendations

• Disconnect the negative battery terminal before starting work to avoid short circuits and accidental airbag deployment.
• Work on a static steering wheel position and mark the steering wheel center if it must be removed.
• Inspect connectors and wiring for corrosion or damage before fitting the new stalk.
• After installation, check all functions: intermittent and continuous wiper speeds, washer pumps, rear wiper and fog light activation, and trip computer signals.
• If any functions are controlled via body modules, verify fault codes with a diagnostic tool after fitting.

Why The Part Fails

• Electrical Wear: Repeated switching causes contact wear and increased resistance, leading to intermittent operation.
• Moisture Ingress: Water or condensation can corrode internal contacts and connectors.
• Mechanical Wear: Internal springs and plastic detents can fatigue or break after extended use.
• Connector Issues: Loose or oxidized connector pins give unreliable signalling to control units.

Technical Information

• Manufacturer: Valeo
• Model: Citroën C4 / C4 Picasso / C4 Grand Picasso (first series)
• Product Codes: 96621666XT
• Other Numbers: 6242HJ, 624346

Notes For Professionals

These stalks are frequently searched by their product numbers, so include the codes in your parts lookup to find the correct unit fast. When replacing components that interact with vehicle electronics, always clear and read fault codes after fitment and verify proper communication with the vehicle’s on-board systems.

This multifunction stalk assembly (COM2008) is a direct-fit replacement for Peugeot/Citroën models and is ideal for professional workshops and experienced DIY mechanics. Designed to manage several vehicle functions from under the steering wheel, it restores centralized control of lighting, wipers, cruise and audio shortcuts. Commonly searched by OE numbers such as 96773911XT, 6242WQ or 6243A0, this unit is easy to find and reference when ordering spare parts.

Features

• Multifunction stalk assembly controlling lights, fog lights, cruise control, front wipers and rain sensor.
• Integration with vehicle stability systems (ESP) and steering wheel audio/radio controls (may require transfer or additional small module).
• OE Cross-references included for quick identification (96773911XT, 6242WQ, 6243A0, 96773911ZD).
• Suitable for PEUGEOT 3008 I and PEUGEOT 5008 I models.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: PEUGEOT 3008 I, PEUGEOT 5008 I
• Product Codes: 96773911XT, 6242WQ, 6243A0, 96773911ZD
• Other Numbers: COM2008

Installation Recommendations

When replacing the multifunction stalk, follow workshop safety and manufacturer guidelines. Recommended steps:

• Disconnect the vehicle battery before starting work to avoid short circuits and airbag/airbag clock spring damage.
• Remove the steering column trim panels to access the stalk unit. Keep screws and clips organized.
• Unplug electrical connectors carefully and note connector positions. Avoid pulling on wiring harnesses.
• Replace the stalk assembly and reconnect all plugs. Refit trim panels and reconnect the battery.
• Some functions (steering wheel audio shortcuts, cruise control wiring) may require transferring the original radio control module or adapting settings with a diagnostic tool.

Replacement Procedure

1. Park the vehicle on level ground, engage the handbrake and remove the ignition key.
2. Disconnect the negative battery terminal and wait a few minutes for vehicle systems to power down.
3. Remove lower and upper steering column covers to expose the stalk unit. Carefully detach the electrical connectors.
4. Unscrew and remove the faulty stalk, then fit the new COM2008 unit in the reverse order.
5. Reconnect the battery and verify basic functions: indicators, lights, wiper operation, and fog lights. Check cruise control and radio controls for full operation.
6. If some features do not operate, diagnostics or configuration with PSA tools (DiagBox/Lexia/PP2000) may be necessary to restore full functionality.

Why This Part Commonly Fails

Multifunction stalks are subject to frequent mechanical use and environmental stress inside the steering column. Common failure causes include internal switch wear, contact corrosion from moisture or condensation, broken or fatigued ribbon cables, and intermittent electrical contacts due to repeated steering movements. Symptoms typically include non-responsive indicators, intermittent wiper operation, loss of cruise control functionality, or unresponsive steering wheel audio controls.

Notes For Professionals

This unit is often identified and ordered by OE numbers (96773911XT, 6242WQ, 6243A0, 96773911ZD). When installing in vehicles with integrated steering wheel controls, check whether the radio control module must be transferred from the original part to retain audio and shortcut functionality. For diagnostics and any required adaptations, use PSA-compatible diagnostic equipment for reliable results.

High-quality steering column stalk assembly suitable for Citroën and Peugeot vehicles equipped with the Delphi COM2005 system. This multifunction stalk operates vehicle stability control (ESP), fog lights, both front and rear wipers, and the instrument cluster/trip computer controls. The part is commonly searched by OEM reference numbers (96643943XT, 98062014XT, 98016686XT, 6242PK), so including these codes in your search increases the chance of finding the exact unit.

Key Features

• Multifunction Control: One stalk handles ESP/traction inputs, fog light switching, front and rear wiper functions, and trip computer scrolling/selection.
• Direct Fit: Designed for steering columns of compatible Peugeot 308 (first generation) and Citroën C3 Picasso models.
• OEM Supplier Type: Delphi COM2005 electrical architecture.
• Searchable By Part Numbers: 96643943XT, 98062014XT, 98016686XT, 6242PK, COM2005 — useful keywords for fast identification.

Technical Information

• Manufacturer: Delphi
• Model: Peugeot 308 I; Citroën C3 Picasso
• Product Codes: 96643943XT; 98062014XT; 98016686XT
• Other Numbers: 6242PK; COM2005

Installation Recommendations

Always follow safe working procedures. Before beginning work, disconnect the battery and wait the manufacturer-recommended time to prevent accidental airbag deployment and to protect vehicle electronics. Remove the steering wheel trim and lower/upper column covers to access the stalk assembly. Unplug the wiring connector(s), release retaining clips or screws, and replace with the new stalk, ensuring connectors engage fully and clips/screws are secured to the original torque where specified. After installation, check all functions (wipers, fog lights, ESP inputs, and trip computer controls) for correct operation. If the vehicle exhibits stored error codes after replacement, clear codes and re-check; professional diagnostic equipment may be required for full fault clearing.

Why This Part Fails Most Often

• Electrical Wear: Repeated switching causes contact wear or intermittent connections inside the stalk.
• Moisture and Corrosion: Water ingress or humidity can corrode contacts and connectors, leading to erratic behavior.
• Mechanical Fatigue: Plastic levers and internal mechanisms can fracture after years of use or from excessive force.
• Connector Issues: Loose or damaged plugs and wiring can mimic stalk faults; inspect harnesses during replacement.

Typical Symptoms Indicating Replacement

• Intermittent or Non-Working Wipers (Front Or Rear)
• Fog Lights Fail To Switch On/Off
• ESP/Traction Warning Light Or Loss Of Related Functions
• Trip Computer Controls Not Responding
• Physical Play Or Stiffness In The Stalk Lever

Additional Notes

This component is usually not a scheduled wear item — replace it when faults or physical damage appear. Because these stalks are commonly identified by their OEM references, including the part numbers in searches improves findability in online catalogs and search engines. When diagnosing, check connectors and wiring for damage before replacing the stalk to avoid unnecessary parts replacement.

Overview

High-quality Valeo multifunction steering wheel switch assembly designed to restore full control of cruise control, audio functions, onboard computer menus and the horn on compatible Citroën models. Supplied with original product codes 96624941ZD and 6242Y9 for quick identification — ideal for professional workshops and DIY mechanics looking for a direct-fit replacement part that improves vehicle ergonomics and safety.

Key Benefits

• Direct fit for Citroën multi-function steering wheels — simplifies replacement and reduces workshop time.
• Controls Cruise Control, Radio, Onboard Computer (Trip Computer) and Horn from the steering wheel.
• Designed by Valeo to match OEM ergonomics and button feedback.
• Part numbers included in the description to help find the correct item quickly (96624941ZD, 6242Y9).

Compatibility

Compatible With: Citroën C4, Citroën C4 Picasso, Citroën Grand C4 Picasso. Search Using Product Codes 96624941ZD Or 6242Y9 To Confirm Fitment For Your Vehicle.

Technical Information

• Manufacturer: Valeo
• Model: Citroën C4, C4 Picasso, Grand C4 Picasso
• Product Codes: 96624941ZD, 6242Y9
• Additional Numbers: NFP

Installation Recommendations

• Always Disconnect The Battery Before Starting Work And Wait At Least Two Minutes To Allow SRS Capacitors To Discharge.
• Remove The Airbag Module Carefully According To Manufacturer Procedure — Airbag Work Should Be Performed By A Trained Technician Or With Appropriate Caution.
• Unscrew Or Unclip The Steering Wheel Trim Panels To Access The Switch Assembly; Unplug Electrical Connectors Before Removing The Old Unit.
• Fit The New Switch In Place, Reconnect All Plugs Securely And Reassemble Trims. Refit The Airbag And Reconnect The Battery Last.
• After Installation, Verify All Functions: Cruise Control Activation, Audio Controls, Onboard Computer Navigation And Horn Operation. If Any Function Is Intermittent, Recheck Connector Contacts And Grounding.
• Use Correct Hand Tools To Avoid Damaging Fasteners Or Trim Clips; Follow Torque Values And Procedures Recommended By The Vehicle Manufacturer Where Applicable.

Why The Part Often Fails

Common Causes Of Failure Include Wear Of Internal Contacts From Repeated Use, Dirt Or Moisture Ingress Causing Corrosion, Mechanical Damage To Buttons/Levers And Electrical Faults In Connector Pins. Symptoms Typically Include Unresponsive Buttons, Intermittent Operation Of Cruise Or Radio Controls, Or A Horn That Does Not Work From The Steering Wheel. High-Mileage Vehicles Or Vehicles Exposed To Humidity Are More Prone To These Issues.

Practical Tips For Workshops And DIYers

• Reference The Product Codes (96624941ZD / 6242Y9) When Ordering To Ensure Correct Part Selection.
• Keep A Clean Workspace When Removing The Airbag To Prevent Debris From Entering Switch Cavities.
• If Buttons Are Sticky But The Switch Is Otherwise Intact, Inspect For Contaminants Before Full Replacement.

Order This Valeo Steering Wheel Control Assembly By Product Code To Quickly Restore Full Steering Wheel Functionality And Improve Driver Convenience And Safety.

Delphi COM2000 steering column stalk assembly designed for Citroën and Peugeot models. This unit controls exterior lighting functions such as fog lights, the front and rear wipers, as well as infotainment controls, trip computer inputs and ESP-related signals. The part is frequently referenced and searched by its product codes, making it easy to find when ordering or replacing in a workshop environment.

Designed for professional garages and experienced DIYers, the stalks offer direct replacement of the original COM2000 switches. The radio and cruise control stalks are not included and can be purchased separately if required. The assembly is suitable for vehicles from the Stellantis group running the COM2000 steering column system.

Key Features

• Direct Fit For Citroën And Peugeot Vehicles Equipped With Delphi COM2000
• Controls Fog Lights, Front And Rear Wipers, Radio Inputs, Trip Computer, And ESP Signals
• Multiple Product Numbers For Easy Identification And Ordering
• Ideal For Workshop Replacements And DIY Repairs

Technical Information

• Manufacturer: Delphi
• Model: COM2000 Steering Column Stalks
• Product Codes: 96605652XT, 6242C4, 624218, 6242J0
• Additional Numbers: 623939, 6239AK, 6239M2, 6239PW, 6239W2
• Compatible Models (Typical): Peugeot 307 II, Peugeot 308 I, Citroën Xsara, Citroën Xsara Picasso

Installation Recommendations

• Disconnect The Battery Before Starting Work And Follow Manufacturer Procedures To Avoid Airbag Or Electrical Damage.
• Remove Steering Column Trim Panels To Access The Stalk Unit; Keep Fasteners And Clips Organized For Reassembly.
• Unplug Electrical Connector(s) Carefully; Avoid Pulling On Wiring Looms Directly.
• Remove Mounting Screws Or Clips Securing The Stalk Assembly, Replace With New Unit, And Reconnect All Plugs.
• After Reassembly, Verify All Functions (Wipers, Lights, Radio Controls, Trip Computer, ESP Signals) Work Correctly.
• If Any Inconsistent Behavior Occurs, Recheck Connectors, Grounds And Fuses Before Proceeding To Further Diagnostics.

Most Common Failure Reasons

• Wear Of Internal Switch Contacts Caused By Frequent Use Leading To Intermittent Or Nonfunctional Controls.
• Moisture Ingress And Corrosion Affecting Electrical Contacts, Especially In Older Vehicles Or When Seals Fail.
• Mechanical Damage From Impact Or Rough Handling During Previous Repairs.
• Contamination By Dirt Or Grease Causing Poor Electrical Contact Or Stiff Mechanical Movement.
• Electrical Surges Or Short Circuits That Can Burn Internal Tracks Or Contacts.

Fitment Notes

This COM2000 stalk assembly is typically fitted to the listed Citroën and Peugeot models but is often located and ordered by the product code. Confirm that the vehicle uses the Delphi COM2000 steering column configuration and match the part number when replacing. Radio And Cruise Control Stalks Are Sold Separately.

Replacement Of This Unit Is A Practical Repair For Garages And Skilled DIYers To Restore Full Functionality Of Lighting, Wipers, And Control Inputs. Order Using The Product Codes For Fast Identification And Quicker Workshop Turnaround.

This used COM2008 multifunction stalk assembly (part number 96773911ZD) is designed for Stellantis vehicles and provides reliable control of lighting, signaling and wiper functions directly from the steering column. Engineered to match OE mounting points and electrical connectors, it is a practical replacement for workshops and DIY mechanics looking to restore full functionality to the steering controls on compatible Peugeot and Citroën models. The unit operates headlamps, fog lamps, front and rear wipers, turn signals, horn and the vehicle trip computer inputs — all functions commonly integrated into the COM2008 module.

Key Benefits

Direct-fit design for quick replacement, restores full steering-column control functions, and carries the common OEM product code 96773911ZD and designation COM2008. Ideal for garages and self-repair enthusiasts who need a straightforward swap to fix intermittent or failed stalk functions.

Technical Information

• Manufacturer: Stellantis / Peugeot / Citroën
• Model: Peugeot 3008 I, Peugeot 5008 I, Citroën C4 II, DS4, DS5, Partner II
• Product Codes: 96773911ZD, COM2008
• Other Numbers: COM2008 (designation used in parts listings)

Compatibility And Fitment

Fits first-generation Peugeot 3008 and 5008 (T84) and several related platforms within the Stellantis parts family where COM2008 multifunction stalks are specified. Always verify that the connector style and mounting layout match the vehicle before installation.

Installation Recommendations

• Disconnect the battery before starting and allow capacitors to discharge to avoid airbag deployment or electrical damage.
• Remove the driver airbag and steering wheel following the vehicle manufacturer’s safety procedures. Mark steering wheel position to preserve alignment.
• Remove steering column shrouds to access the multifunction stalk unit, unplug electrical connectors and unfasten retaining screws or clips.
• Install the replacement unit, reconnect all connectors, reassemble covers and steering wheel, then reconnect the battery.
• After installation, verify all functions (indicators, wipers, lights, horn, trip computer inputs) and clear any stored fault codes with a diagnostic tool if necessary.
• If You Are Not Equipped With Proper Tools Or Lack Experience Handling Airbags/Clockspring, Have The Replacement Performed By A Professional.

Why This Part Commonly Fails

Multifunction stalks are subject to regular mechanical actuation and electrical switching. The most common failure modes include worn or pitted internal contacts, contamination or corrosion of connectors, broken plastic levers or detents, and intermittent electrical faults due to degraded flex circuits. Symptoms of failure are non-functioning indicators or wipers, intermittent operation, stuck stalks, horn not responding from the stalk, or erroneous warnings on the instrument cluster.

Practical Notes For Mechanics

When diagnosing, check connector pins for corrosion, measure continuity across the stalk switches where accessible, and inspect the steering column for foreign objects or water ingress that may have caused the failure. Replacing the stalk unit usually restores all functions, but ensure the clockspring (spiral cable) is not damaged during removal or reinstallation to avoid airbag and steering wheel control faults.

This multifunction steering column stalk assembly (COM2005) is a direct-fit electrical control unit used on the Peugeot 207. Designed for professional workshops and experienced DIY mechanics, this unit consolidates multiple driver controls into a single compact module—improving reliability and simplifying steering column wiring. Clear OEM product codes make it easy to locate the correct replacement part and speed up repairs.

Features

Multifunction design combining stalk switches for lights, indicators, fog lamps, front and rear wipers, horn and ESP-related inputs. Robust electrical connectors and integrated microswitches provide factory-equivalent functionality. Ideal for restoring lost or intermittent control functions without extensive rewiring.

Technical Information

• Manufacturer: Valeo (OEM Supplier for Peugeot/Stellantis)
• Model: Peugeot 207
• Product Codes: 96661299XT, 6242YN, COM2005
• Other Numbers: NFP (as referenced)

Compatibility

Fits Peugeot 207 models equipped with the COM2005 multifunction steering column block. Suitable for both standard and common equipment variants of the 207 series where the listed product codes match.

How It Works And Function

The assembly translates mechanical stalk movements into electrical signals for multiple vehicle systems: lighting (low/high beam, turn signals), fog lights, wipers (intermittent, low/high, rear), horn and inputs related to ESP. It replaces individual switches and provides centralized switching logic at the steering column interface.

Typical Failure Modes And Why It Goes Bad

Common causes of failure include worn microswitch contacts, mechanical wear of the stalk mechanisms, contamination or corrosion of electrical contacts, and damage to internal ribbon cables or connectors. Symptoms are intermittent or non-functional indicators, stuck wipers, loss of horn or lighting functions, and sporadic ESP warnings. Environmental exposure and repeated mechanical use accelerate wear.

Replacement Frequency

There Is No Fixed Interval For Replacement. Lifespan Depends On Usage And Environmental Conditions. Replace The Unit When You Observe Persistent Electrical Or Mechanical Faults That Affect Safety Or Control Functions.

Installation

Before starting, ensure the vehicle is secured and on a flat surface. Recommended general steps for a skilled technician or experienced DIY mechanic:

• Disconnect The Battery To Prevent Short Circuits And Airbag Deployment.
• Remove Steering Column Trim Panels To Access The Stalk Assembly.
• Unplug Electrical Connectors And Note Their Positions; Release Any Retaining Clips Or Screws.
• Remove The Faulty Stalk Assembly And Install The Replacement, Ensuring Correct Orientation.
• Reconnect Connectors, Reassemble Trim, Reconnect The Battery And Test All Functions Thoroughly (Indicators, Lights, Wipers, Horn, ESP Inputs).

Installation Recommendations

Use Proper Torques For Fasteners And Avoid Pulling On Wiring Harnesses. Inspect Connectors For Corrosion And Clean Or Replace If Necessary. When Replacing The Unit, Verify That Connector Pins Are Straight And Fully Seated. If Intermittent Electrical Faults Persist, Check Wiring To The Steering Column And Ground Points.

Notes For Professionals

This Module Is An Electrical/Mechanical Assembly—Handle With Care To Avoid Damaging Internal Switches. When Diagnosing, Use A Multimeter To Verify Continuity And Signal Presence At The Module Connectors Before Full Replacement. Keep The Steering Wheel Centered When Removing Components To Avoid Clock Spring Damage.

Why Choose This Part

Direct-fit part numbers and OEM-style construction make this COM2005 Valeo unit a practical repair choice for restoring full steering column functionality on affected Peugeot 207 vehicles. Clear product codes speed up identification and reduce downtime in the workshop.

High-quality multifunction steering column stalk (DELPHI COM2003) designed for PSA group vehicles. This compact control unit brings together numerous driver functions — lighting and fog lamps, wiper and washer control for front and rear, trip computer operation, ESP inputs, cruise control engagement and radio controls (radio control may need to be added or transferred from the original stalk). Ideal for professional workshops and experienced DIY mechanics who service Citroën and Peugeot models. Use key search terms like DELPHI COM2003, 96605590XT and 624297 to find this part quickly.

Fitment And Replacement

Typical fitment includes Peugeot 307 (from 2005) and other PSA models where the COM2003 stalk is used — examples from workshop records: Peugeot 206, Peugeot 307 II, Peugeot 406, Peugeot 807, Berlingo II, Citroën C5 I and Citroën C8. Always confirm physical match of connector and function block before installation. Replacement is straightforward for a trained technician: set the steering wheel to straight ahead, disconnect the battery, remove the airbag and steering wheel (follow manufacturer torque and safety instructions), disconnect the stalk wiring connectors and remove the retaining screws or clips, fit the new stalk, reconnect wiring and reassemble. After fitment, check and test all functions (wipers, lights, trip computer, ESP indications, cruise control and radio controls).

Recommended Installation

• Disconnect the battery before any work on the steering column and wait the recommended time to allow capacitors to discharge.
• Follow manufacturer procedures for airbag removal and steering wheel torque values; use the correct tools to avoid damaging trim or connectors.
• Handle electrical connectors carefully — bent pins or damaged plugs are a common fault after poor installation.
• After installation, verify all functions on the vehicle and, if necessary, clear fault codes with suitable diagnostic equipment. Recalibration of related systems may be required in specific cases.

Most Common Failure Reasons

Multifunction stalks typically fail due to internal contact wear from repeated use (wipers, indicators, cruise control switches), ingress of moisture or dirt causing corrosion of contacts, mechanical breakage of the plastic stalk or internal levers, and electrical faults from connector corrosion or short circuits. Symptoms include intermittent or non-functioning wipers, fog light or indicator failure, loss of radio controls on the stalk, or cruise control not engaging.

Technical Information

• Manufacturer: Delphi (used on PSA / Peugeot Citroën vehicles)
• Model: COM2003
• Product Codes: 96605590XT, 624297
• Other Numbers: COM2003

Why Choose This Part

This multifunction stalk consolidates multiple controls into one serviceable unit, reducing dashboard clutter and simplifying repairs. It’s a practical replacement for workshops and competent DIYers looking to restore full functionality of steering column controls. Using the correct part number (96605590XT / 624297) increases the chance of direct fit and avoids adaptors or rewiring.

Notes For Professionals

When sourcing replacement stalks, check connector type and pinout against the vehicle’s existing part. In cases where radio controls or additional functions are not present on the replacement, the original switch assembly may need to be transferred. Always perform a full functional check and clear any related fault codes after installation.