Original used Citroën Peugeot (PSA) 98095330ZD cruise control control/lever – for steering column with COM2008 module. It reliably operates the cruise control and speed limiter, an ideal replacement for a malfunctioning or worn part. Thanks to OEM quality, it fits exactly, has the right button logic and a long life – without the compromises typical of cheap replacements.

Main advantages
– Original PSA part 98095330ZD – assurance of compatibility and correct function
– Cruise control and speed limiter functions (CRUISE/LIMIT), buttons +/–, RES/MEM, ON/OFF
– Designed for COM2008/COM2008e modules – quick plug-in replacement without modifications
– Suitable for Citroën, Peugeot and selected derivatives on PSA platforms (Fiat/Toyota/Opel) – see below

Technical information
– Designation/OEM: 98095330ZD (PSA)
– Part Type: Control/Cruise Control Lever (Bottom Lever Under Steering Wheel)
– Location: under the steering wheel, near the steering column (left side under the turn signal)
– Compatibility module: COM2008 / COM2008e (steering column)
– Functions: cruise control activation/deactivation, speed setting +/–, restore/save (RES/MEM), LIMIT switching
– Connector: original socket for COM2008 (without installation modifications)
– Power supply: 12 V system, data communication via COM2008
– Material: durable plastic, black design with white print
– Condition: used, tested, fully functional; normal cosmetic signs of use without affecting function

Exemplary vehicle compatibility
– Citroën: C3 (II/III), C4, C4 Picasso/Grand, C5 X7, Berlingo B9 and others with COM2008
– Peugeot: 207, 208, 2008, 308 (T7/T9), 3008, 5008, Partner B9, Expert II
– Fiat: Scudo II (on PSA platform)
– Toyota: ProAce I (2013–2016, PSA)
– Opel: selected models on the PSA platform (e.g. Combo E, Zafira Life, Vivaro C – depending on equipment)
Note: Actual compatibility may vary by year of manufacture, trim and module type. Always verify by OEM number 98095330ZD, lever/connector shape and VIN.

Installation and activation
– Replacement: remove the upper/lower steering column cover, release the old lever from the COM2008 module, snap in the new one, plug in the connector
– Safety: disconnect the battery before work (min. 10 minutes) due to airbags
– Coding: if the car has not yet had cruise control active, it must be enabled in BSI/ECU diagnostics (DiagBox/Lexia/PP2000). Replacing the lever itself usually does not require any further modifications

How to verify the correct part
– Compare OEM code: 98095330ZD
– Check if the vehicle has a COM2008/COM2008e module
– Compare the shape of the lever and connector with the old part
– In case of uncertainty, send us the VIN – we will verify suitability

Why choose a used original?
– Better durability and feeling of control than cheap aftermarket copies
– Accurate fit and correct pictogram graphics
– Immediate replacement without additional modifications

Key wanted links: cruise control controller 98095330ZD, cruise control lever Citroën Peugeot, cruise control switch COM2008, cruise control switch under the steering wheel, Peugeot 308 T9 cruise control, Expert II controls under the steering wheel

Package: 1x cruise control controller/lever 98095330ZD. Functionality guarantee.

Original control (lever) cruise control for Citroën and Peugeot with modular unit under the steering wheel type COM2008. Ideal for replacement of non -functional levers or for additional commissioning of cruise control for cars that have the necessary cabling and the COM2008 unit from production. Corresponds to codes 96655861XT, 96655861DZ and OEM 6242ZS.

Cruise control keeps the set speed without having to hold the gas, which increases comfort on longer routes and can contribute to a more economical driving. The control is intuitive – using the lever under the steering wheel set/save speed, increase/reduce the settings and temporarily turn off or restore the function.

Compatibility: Designed for PSA vehicles approximately 2008 equipped with a column module COM2008 (typically Citroën C3 II, DS3, Berlingo III B9, C5 II/X7 and Peugeot Partner III B9, etc.). Always verify before buying according to the VIN and the type of column unit to see if the COM2008 has. This part is not designed for older COM2000 assemblies (often on older models as 206, etc.).

Installation and activation: In most cases, it is sufficient to remove the plastic steering columns, insert the lever into the prepared slot in COM2008 and secure it with a screw (usually torx). Subsequently, it is necessary to activate the cruise control function in the control unit/BSI by diagnostics (diagnostics (diagnostics). For proper activity, the brake pedal must be functional in the car; Some engines also require a clutch pedal switch. After activation, we recommend performing a test drive and verify all functions (SET/RES/±, brake cancellation).

Status and tips: This is the original part of the car, common cosmetic tracks of use are not affected. You can get the highest certainty of compatibility by comparing the part number and physical verification of the type of column unit. If you additionally put into operation cruise control, check the presence of the necessary pedal switches and support the function in the engine control unit.

technical information
Manufacturer: PSA Citroën/Peugeot (OEM)
Model: Driver/Cruise control lever for COM2008 (under steering wheel)
Product codes: 96655861XT, 96655861ZD, 6242ZS
Other numbers: 6242.ZS, 96655861 XT, 96655861 ZD

If you are looking for a cruise control lever for Citroën/Peugeot with COM2008, verify the codes of 96655861XT, 96655861ZD, 6242ZS and simply refill or replace the existing driver. Properly selected part and activation through diagnostics are the key to fully functional cruise control and more convenient driving.

This transponder antenna is a direct-fit component designed for Peugeot and Citroën models that use a conventional (non-multiplex) immobilizer system. Ideal for professional workshops and competent DIYers, the unit reads the key transponder signal around the ignition switch and relays it to the immobilizer control module. Replacement of a faulty antenna restores reliable key recognition and eliminates no-start conditions caused by missing transponder communication.

Compact and discreet, the antenna assembly typically mounts around the ignition barrel or column. It is commonly sought by part number (9632487880 / 616069), making it easy to find in catalogs or when ordering spare parts. Technically simple but crucial for vehicle security, this antenna ensures the transponder coil can communicate with the vehicle ECU to permit engine start.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: 206, 307 I, 406, Berlingo I, Berlingo II, Expert II, Jumpy II, Partner I, Partner II, Xsara, Xsara Picasso
• Product Codes: 9632487880, 616069
• Other Numbers: NFP

Installation Recommendations

Before starting work, disconnect the battery and wait a few minutes to avoid accidental short circuits. Typical replacement steps:

• Remove the lower steering column trim and any covers around the ignition switch.
• Unplug the antenna connector and detach any retaining clips.
• Replace the antenna with the new unit, ensuring the coil sits concentrically around the ignition barrel.
• Reconnect the connector, reassemble trims and reconnect the battery.

Always follow the vehicle manufacturer’s removal and installation procedure to avoid damage to the ignition barrel, wiring harness, or surrounding components.

Why The Part Most Commonly Fails

Failures are usually caused by mechanical damage to the antenna or connector (from collisions or rough handling during steering column work), corrosion or moisture ingress, broken or fatigued wiring, or degraded solder joints in the coil. Symptoms include intermittent or complete loss of key recognition, immobilizer warning lights, and engine cranking without start.

Practical Notes For Mechanics And DIYers

When replacing the antenna, inspect the connector pins and wiring for corrosion or damage and test continuity where possible. If the immobilizer fault persists after antenna replacement, check the immobilizer control module and key transponder battery/state. Because this part is specific to non-multiplex systems, confirm that the vehicle does not use a multiplexed CAN/BSI configuration before ordering.

Part number 9632162780 4112AG is compatible with models including the Peugeot 206, 307 I, 406, Berlingo I, Berlingo II, Expert II, Jumpy II, Partner I, Partner II, Xsara, and Xsara Picasso.

Replacement of the rotary contact is typically needed when the airbag warning light remains illuminated or when there are issues with airbag deployment, which can occur due to wear and tear over time. Regular inspection and timely replacement of this component can prevent safety risks associated with malfunctioning airbags.

Technical Information

• Manufacturer: PSA
• Model: Citroën Peugeot
• Product Codes: 9632162780
• Additional Numbers: 4112AG

Product Overview

High-quality transponder antenna designed for PSA/ Stellantis vehicles. This immobilizer antenna reads the key transponder signal and transmits it to the vehicle’s immobilizer system. It is a direct-fit replacement for a range of PEUGEOT and CITROËN models with multiplexed wiring and is intended for professional installers and DIY mechanics who need reliable anti-theft recognition between key and ECU.

Technical Information

• Manufacturer: Stellantis (PEUGEOT / CITROËN)
• Model(s): Peugeot 1007, Peugeot 307, Peugeot 807, Citroën C3, Citroën C8 (see fitment list below)
• Product Codes: 9648445180, 9632897680, 9652781780, 6160C0
• Other Numbers: 616073, 616087, 6160C2, 9652781760

Fitment / Compatible Models

Common compatible models include:

• Peugeot 1007
• Peugeot 307
• Peugeot 807
• Citroën C3
• Citroën C8
• Also fitted on related PSA models that use the same immobilizer architecture (check part number match before ordering)

How To Replace

Replacement is straightforward for an experienced mechanic. Typical steps:

• Disconnect the vehicle battery before starting work to avoid electrical damage.
• Remove steering column trim to access the ignition barrel and immobilizer antenna ring.
• Unplug the antenna connector and remove any retaining clips or screws.
• Fit the new antenna in the same orientation as the original; ensure the coil ring sits correctly around the ignition barrel.
• Reconnect the wiring, reassemble trims and reconnect the battery. Verify key recognition and engine start function.

Installation Recommendations

• Always disconnect the battery before disassembly to prevent damage to electronic modules.
• Handle the antenna coil carefully to avoid deforming or cracking the ring; even small damages can impair signal strength.
• Check connector pins and wiring for corrosion or damage and clean contacts if necessary.
• After fitting, test with all vehicle keys to confirm reliable transponder recognition and start sequence.

Why This Part Fails Most Often

• Mechanical damage to the antenna coil or housing (impact, cracked trim, deformation).
• Corroded or broken wiring and connector contacts causing intermittent or no signal transmission.
• Water ingress or long-term exposure to moisture leading to coil shorting or connector failure.
• Wear from repeated removal/reinstallation or improper handling during previous repairs.
• Symptoms of failure: Key not recognized, engine immobilized, intermittent starting problems or fault codes related to the immobilizer system.

Technical Details

• Operating Type: Low-frequency (LF) transponder antenna (typically 125 kHz for PSA immobilizer systems).
• Function: Reads passive key transponder and transmits signal to immobilizer/BCM for authentication.
• Connector: OEM-style PSA connector (exact plug variant depends on model and production year).

Notes

Search by product code for quick matching in parts catalogs. Ensure the part number matches the original antenna before ordering to guarantee fitment and correct operation.

Cruise Control Switch For Citroën And Peugeot

Looking for a reliable and high-quality cruise control switch for your Citroën or Peugeot vehicle? We present the excellent 96663636XT switch, a used but fully functional part suitable for models manufactured after 2005. This cruise control switch is ideal for owners of Citroën C5, Peugeot 407, and other models requiring this specific type of switch.

The switch is designed for easy installation and compatibility across a wide range of Citroën and Peugeot cars. Installation can be performed by professional auto mechanics or experienced DIY enthusiasts comfortable with vehicle repairs. Adding this part to your vehicle can enhance not only driving comfort but also the accuracy and reliability of the cruise control function.

Technical Information:

• Manufacturer: PSA (Peugeot, Citroën)
• Models: Citroën (C5 II, Berlingo III, C8), Peugeot (206, 407, 807, Expert II, Partner III, Jumpy II)
• Product Codes: 96663636XT, 6242Z8
• Additional Numbers: Compatible with COM2005 Controllers

This cruise control switch is in excellent condition with full functionality and aesthetics intact, despite being used. Each unit goes through thorough inspection to ensure you receive a premium product that meets your expectations and needs.

Shop confidently with a specialist in used auto parts for Citroën and Peugeot. Your satisfaction is our priority, and we guarantee fast delivery and professional customer service. Order this auto part today and improve your vehicle’s performance with a trusted cruise control switch.

Overview

This replacement cruise control stalk is designed for Citroën and Peugeot steering columns and is suitable for workshops and experienced DIY mechanics. It provides reliable control of set speed, resume and adjust functions and is compatible with vehicles using COM2003 and later on-board control modules. The part is commonly searched and ordered by its product numbers, so the listed codes below will help you find the correct unit quickly.

Key Features

• Direct plug-and-play connection to OEM wiring harness on compatible models (subject to controller type).
• Designed for vehicles from 2005 onward using COM2003/COM2005 and newer systems.
• Maintains original steering column ergonomics and lever feel.
• Suitable for professional installation or experienced DIY replacement.

Installation Guidance

Basic replacement steps for a competent mechanic or an experienced DIYer:

• Disconnect the vehicle battery before starting to avoid short circuits and to protect airbag and electronic modules.
• Remove the steering column trim panels to access the stalk mounting screws and wiring connector.
• Unplug the connector and remove the mounting screw(s) holding the old stalk in place.
• Fit the new stalk, secure it with screws, reconnect the wiring connector and reassemble the trim panels.
• Reconnect the battery and verify cruise control functions on a safe road test. If the vehicle uses advanced body modules, follow any required initialization procedure for the COM unit.

Recommendation For Installation

Always follow manufacturer procedures when removing trim and handling airbag-equipped steering columns. If the vehicle shows electrical faults after fitting, check connector contacts and fuses first. For vehicles integrated with complex COM or BCM modules, perform the final function check with appropriate diagnostic equipment. Use threadlocker on screws if recommended by the vehicle workshop manual.

Why This Part Fails Most Often

• Wear Of Internal Contacts: Frequent use causes contact wear and intermittent operation.
• Mechanical Damage: Physical stress or impact during steering column service can break the lever or its mounting points.
• Corrosion Or Moisture Ingress: Corrosion of connector pins leads to poor electrical contact and failure.
• Connector Or Wiring Issues: Damaged wiring or loose connectors cause loss of function before the stalk itself is considered faulty.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: 206; 407; 807; Berlingo III; C5 II; C8; Expert II; Jumpy II; Partner III; Citroën C5; Citroën C6; Peugeot 407 (Includes Other Compatible Models From 2005 Onwards)
• Product Codes: 96470494XT; 96637157XT; 96663636XT; 6242Z8
• Other Numbers: 6242.Z8 (Alternative Notation)

Notes For Mechanics And DIYers

Customers often search by part number—use the codes above when locating stock. Confirm controller type (COM2003 or later) before installation to ensure compatibility. If unsure about initialization requirements for the vehicle’s control modules, consult the vehicle service manual or use professional diagnostic equipment.

Over time, switch controls can wear out due to frequent use, leading to malfunctions. Regular inspections and timely replacements are recommended to maintain vehicle safety and functionality. This part integrates seamlessly into your car’s electrical system and is essential for optimal operation.

Technical Information

• Manufacturer: Citroën Peugeot
• Model: 96662456XT 6242ZT
• Product Codes: 96662456XT
• Other Numbers: 6242ZT