This used COM2008 multifunction stalk assembly (part number 96773911ZD) is designed for Stellantis vehicles and provides reliable control of lighting, signaling and wiper functions directly from the steering column. Engineered to match OE mounting points and electrical connectors, it is a practical replacement for workshops and DIY mechanics looking to restore full functionality to the steering controls on compatible Peugeot and Citroën models. The unit operates headlamps, fog lamps, front and rear wipers, turn signals, horn and the vehicle trip computer inputs — all functions commonly integrated into the COM2008 module.

Key Benefits

Direct-fit design for quick replacement, restores full steering-column control functions, and carries the common OEM product code 96773911ZD and designation COM2008. Ideal for garages and self-repair enthusiasts who need a straightforward swap to fix intermittent or failed stalk functions.

Technical Information

• Manufacturer: Stellantis / Peugeot / Citroën
• Model: Peugeot 3008 I, Peugeot 5008 I, Citroën C4 II, DS4, DS5, Partner II
• Product Codes: 96773911ZD, COM2008
• Other Numbers: COM2008 (designation used in parts listings)

Compatibility And Fitment

Fits first-generation Peugeot 3008 and 5008 (T84) and several related platforms within the Stellantis parts family where COM2008 multifunction stalks are specified. Always verify that the connector style and mounting layout match the vehicle before installation.

Installation Recommendations

• Disconnect the battery before starting and allow capacitors to discharge to avoid airbag deployment or electrical damage.
• Remove the driver airbag and steering wheel following the vehicle manufacturer’s safety procedures. Mark steering wheel position to preserve alignment.
• Remove steering column shrouds to access the multifunction stalk unit, unplug electrical connectors and unfasten retaining screws or clips.
• Install the replacement unit, reconnect all connectors, reassemble covers and steering wheel, then reconnect the battery.
• After installation, verify all functions (indicators, wipers, lights, horn, trip computer inputs) and clear any stored fault codes with a diagnostic tool if necessary.
• If You Are Not Equipped With Proper Tools Or Lack Experience Handling Airbags/Clockspring, Have The Replacement Performed By A Professional.

Why This Part Commonly Fails

Multifunction stalks are subject to regular mechanical actuation and electrical switching. The most common failure modes include worn or pitted internal contacts, contamination or corrosion of connectors, broken plastic levers or detents, and intermittent electrical faults due to degraded flex circuits. Symptoms of failure are non-functioning indicators or wipers, intermittent operation, stuck stalks, horn not responding from the stalk, or erroneous warnings on the instrument cluster.

Practical Notes For Mechanics

When diagnosing, check connector pins for corrosion, measure continuity across the stalk switches where accessible, and inspect the steering column for foreign objects or water ingress that may have caused the failure. Replacing the stalk unit usually restores all functions, but ensure the clockspring (spiral cable) is not damaged during removal or reinstallation to avoid airbag and steering wheel control faults.

This steering wheel control module is a direct-fit switch cluster designed for Citroën/Peugeot Group vehicles. It restores complete steering wheel button functionality — audio, phone and menu control inputs — and is ideal for professional workshops and DIY mechanics who search by part number. The module is a practical replacement for faded, damaged or intermittently working controls and keeps original steering wheel ergonomics and electrical interfaces.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model(s): Citroën C4 II, DS4, DS5, Peugeot 508, Partner II (as listed)
• Product Codes: 96720447ZD, 98094695ZD
• Additional Numbers: 96759249XT, 98000200ZD, 6243C4

Installation Recommendations

1. Disconnect the negative battery terminal and wait at least 10 minutes to disable the airbag system before starting work.
2. Remove the airbag module from the steering wheel following the vehicle manufacturer’s procedure.
3. Unscrew the retaining fasteners and carefully detach the steering wheel trim to access the switch module.
4. Disconnect electrical connectors and remove the old switch module. Take care with fragile plastic clips and ribbon cables.
5. Fit the replacement module, reconnect all plugs, and reassemble in reverse order. Ensure airbag and steering wheel fasteners are torqued to manufacturer specifications.
6. Reconnect the battery and verify full functionality of all steering wheel controls, voice/phone buttons and menu navigation.

Why This Part Fails Most Often

Steering wheel switch modules typically fail due to wear and mechanical damage rather than simple electrical aging. Common causes include worn contact pads from heavy use, broken or detached plastic/chrome trim (as in this unit), moisture ingress causing corrosion, short circuits after liquid spills, and physical damage from impacts or airbag deployment. Intermittent function can also be caused by connector issues or a faulty clock spring in the steering column, so inspect surrounding components when diagnosing.

Benefits of replacing this unit: restores factory control functionality, maintains resale value, and avoids more expensive electrical work if the problem is localized to the switch module. Because many buyers search by product number, the included codes help you confirm fitment quickly.

High-quality steering column stalk assembly COM2008 designed for Citroën and Peugeot models. This unit consolidates multiple controls into one compact module, restoring full functionality for lighting, wipers, indicators, horn and on-board computer commands. Ideal for professional garages and DIY mechanics who need a direct replacement part often searched by product codes (96759249XT, 98000200ZD, 6243C4, COM2008). Installing a correct stalk assembly returns intuitive multifunction control and eliminates intermittent faults such as stuck wipers, non-working indicators or inoperative horn.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C4 II, Peugeot 508, DS4, DS5
• Product Codes: 96759249XT, 98000200ZD
• Other Numbers: 6243C4, COM2008

Function And Benefits

• All-In-One Control: Combines headlight, fog light, wiper, indicator, horn and trip computer controls in a single stalk assembly.
• Direct Fit: Designed to match original mounting points and electrical connectors for the listed models, simplifying replacement.
• Restore Safety And Comfort: Replaces faulty or unreliable stalks that compromise signaling, visibility and driver information access.

Replacement Procedure

Basic replacement steps for competent mechanics:

• Disconnect The Battery: Always isolate the vehicle battery before beginning work to avoid short circuits and SRS/airbag system triggers.
• Remove Steering Column Covers: Unscrew and carefully separate upper and lower shrouds to access the stalk assembly.
• Disconnect Electrical Connectors: Unclip the module connectors gently to avoid damaging terminals.
• Remove Retaining Fasteners: Unscrew the mounting screws or clips holding the stalk assembly in place and extract the old unit.
• Fit New Unit: Position the replacement stalk, secure with original fasteners and reconnect all plugs.
• Function Test: Reconnect the battery and verify all functions (indicators, lights, wipers, horn, trip computer) before reassembling the covers.

Installation Recommendations

• Always Disconnect The Battery Before Work: Prevents electrical damage and accidental airbag deployment.
• Follow Manufacturer Torque And Assembly Procedures: Use correct fasteners and ensure connectors are fully engaged.
• Inspect Wiring And Connectors: Replace or clean corroded terminals to avoid recurring faults.
• Test All Functions Before Final Reassembly: Confirm operation of lights, wipers, horn and trip computer to avoid repeat disassembly.
• Use Proper Tools: Avoid excessive force on plastic clips and steering column components.

Most Common Failure Causes

• Mechanical Wear: Repeated use causes wear on internal contacts and switches, leading to intermittent or complete failure.
• Electrical Contact Corrosion: Moisture ingress or oxidized terminals create poor connections affecting multiple functions.
• Broken Stalk Or Internal Plastics: Physical damage from impact or misuse can break levers or internal guides.
• Short Circuits Or Wiring Damage: Chafed cables or previous repair faults can cause malfunctions or blown fuses.
• Accumulated Dirt And Debris: Impairs contact surfaces and switch movement, particularly on wiper and indicator mechanisms.

Notes For Professionals

This part is commonly identified by product codes 96759249XT and 98000200ZD (also referenced as 6243C4 / COM2008). Ensure physical match of connector shapes and mounting points when selecting replacements. For safety-critical tasks or when airbag components must be handled, follow manufacturer service instructions or have the fitment done by a qualified technician.

Warranty And Quality

Replacement of a defective steering column stalk restores original vehicle controls and improves safety. Verify part number fitment and inspect the unit on delivery for visible damage before installation.

High-quality steering column stalk assembly designed as a direct-fit replacement for many Citroën, Peugeot and DS models. The COM2008 stalks consolidate multiple vehicle controls into a single unit, restoring full functionality for lighting, signaling, wipers and dashboard functions. Ideal for professional technicians and DIY enthusiasts looking for an OE-compatible spare part by product code (98000242ZD, 98199434ZD, COM2008).

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot / DS)
• Model: Citroën C4 II, Peugeot 508, DS4, DS5
• Product Codes: 98000242ZD, 98199434ZD
• Other Numbers: COM2008

Compatibility And Application

Designed to replace the original multi-function stalks fitted on Citroën C4 II, Peugeot 508 and DS models (DS4, DS5). This unit controls exterior lighting (headlights, parking lights), fog lights, turn signals, horn, front and rear wipers, and provides inputs to the trip computer and onboard electronics. Customers commonly search using the product codes listed above—include these codes when locating the correct spare part.

Installation Recommendations

Before starting work, disconnect the negative battery terminal and wait at least 10 minutes to deactivate the airbag system. Remove the steering wheel trim and lower/upper column covers to access the stalk assembly. Unplug the electrical connector(s) and remove the retaining screws or clips holding the module. Fit the new stalk in reverse order, ensuring connectors are fully seated and clips engage. Refit column covers and verify all functions (lights, indicators, wipers, horn, trip computer) before returning the vehicle to service. If the steering wheel or airbag must be removed, follow the vehicle manufacturer’s safety procedures or have the job performed by a trained technician.

Why The Part Fails Most Often

Multi-function stalk assemblies are subject to frequent mechanical use and electrical switching. Common failure modes include worn contacts causing intermittent or non-functioning indicators and wipers, plastic fatigue or broken levers from repeated operation, and corrosion or moisture ingress affecting electrical connectors. Faulty stalks may also trigger electrical faults or warning lights if internal switches fail. Environmental exposure, heavy use of the wiper and indicator functions, and long service life increase the likelihood of failure.

Practical Notes For Mechanics And DIYers

• Verify the product code when searching or ordering; these units are often found by part number rather than description.
• Check related fuses and wiring if symptoms persist after replacement—intermittent faults can originate elsewhere in the circuit.
• Use care with connectors and retainers to avoid damaging fragile plastic clips on the steering column covers.
• After installation, perform a full function check: headlights (including dipped/main beam), fog lights, left/right indicators, horn, front/rear wipers and the trip computer inputs.

Replacing a faulty COM2008 stalk restores full control of essential vehicle functions and ensures safe, reliable operation of lighting and signaling systems. The part is a direct-fit option for the listed Citroën, Peugeot and DS models and is suited for both workshop installation and competent home mechanics.