High-quality multifunction steering column stalk (DELPHI COM2003) designed for PSA group vehicles. This compact control unit brings together numerous driver functions — lighting and fog lamps, wiper and washer control for front and rear, trip computer operation, ESP inputs, cruise control engagement and radio controls (radio control may need to be added or transferred from the original stalk). Ideal for professional workshops and experienced DIY mechanics who service Citroën and Peugeot models. Use key search terms like DELPHI COM2003, 96605590XT and 624297 to find this part quickly.

Fitment And Replacement

Typical fitment includes Peugeot 307 (from 2005) and other PSA models where the COM2003 stalk is used — examples from workshop records: Peugeot 206, Peugeot 307 II, Peugeot 406, Peugeot 807, Berlingo II, Citroën C5 I and Citroën C8. Always confirm physical match of connector and function block before installation. Replacement is straightforward for a trained technician: set the steering wheel to straight ahead, disconnect the battery, remove the airbag and steering wheel (follow manufacturer torque and safety instructions), disconnect the stalk wiring connectors and remove the retaining screws or clips, fit the new stalk, reconnect wiring and reassemble. After fitment, check and test all functions (wipers, lights, trip computer, ESP indications, cruise control and radio controls).

Recommended Installation

• Disconnect the battery before any work on the steering column and wait the recommended time to allow capacitors to discharge.
• Follow manufacturer procedures for airbag removal and steering wheel torque values; use the correct tools to avoid damaging trim or connectors.
• Handle electrical connectors carefully — bent pins or damaged plugs are a common fault after poor installation.
• After installation, verify all functions on the vehicle and, if necessary, clear fault codes with suitable diagnostic equipment. Recalibration of related systems may be required in specific cases.

Most Common Failure Reasons

Multifunction stalks typically fail due to internal contact wear from repeated use (wipers, indicators, cruise control switches), ingress of moisture or dirt causing corrosion of contacts, mechanical breakage of the plastic stalk or internal levers, and electrical faults from connector corrosion or short circuits. Symptoms include intermittent or non-functioning wipers, fog light or indicator failure, loss of radio controls on the stalk, or cruise control not engaging.

Technical Information

• Manufacturer: Delphi (used on PSA / Peugeot Citroën vehicles)
• Model: COM2003
• Product Codes: 96605590XT, 624297
• Other Numbers: COM2003

Why Choose This Part

This multifunction stalk consolidates multiple controls into one serviceable unit, reducing dashboard clutter and simplifying repairs. It’s a practical replacement for workshops and competent DIYers looking to restore full functionality of steering column controls. Using the correct part number (96605590XT / 624297) increases the chance of direct fit and avoids adaptors or rewiring.

Notes For Professionals

When sourcing replacement stalks, check connector type and pinout against the vehicle’s existing part. In cases where radio controls or additional functions are not present on the replacement, the original switch assembly may need to be transferred. Always perform a full functional check and clear any related fault codes after installation.

This used steering column control unit is a direct replacement option for mechanics and DIY enthusiasts working on Peugeot and Citroën vehicles. It is commonly searched by part numbers 96635796XT, 98069979XT and 6242AA, so listing these codes increases findability in online searches. The module centralizes several functions around the steering column: lighting and fog lights control, wiper and rain-sensor signals, trip computer commands, ESP interfacing and cruise control activation. In some vehicle configurations radio or cruise-control commands require transferring the original stalk or adding the corresponding module.

Compatibility And Application

Fits a range of PSA/Stellantis models — commonly used on Peugeot and Citroën cars. Notable applications include:

• Peugeot 307 / 307 CC (including models from 2005 onwards)
• Peugeot 206
• Peugeot 406
• Peugeot 807
• Peugeot Berlingo II
• Citroën C5 I
• Citroën C8

Technical Information

• Manufacturer: Delphi (used on PSA/Stellantis vehicles)
• Model: COM2003
• Product Codes: 96635796XT, 98069979XT, 6242AA
• Other Numbers: COM2003

Function And Symptoms Of Failure

The stalk assembly provides user inputs for lights, fog lights, wipers, rain sensor signals, trip computer navigation, ESP-related commands, cruise control and some radio controls. Common symptoms indicating a faulty stalk include intermittent or non-functioning indicators for fog lights or wipers, lost trip computer control, unresponsive cruise control switches, or unexpected behaviour of related circuits (flickering lights, stuck wiper positions). Electrical contact degradation can also cause fault codes related to steering column switches.

Why The Part Fails Most Often

• Wear Of Internal Contacts: Repeated use causes contact wear or carbonization, leading to intermittent signals.
• Moisture Ingress And Corrosion: Water or condensation in the column can corrode connectors and switch contacts.
• Mechanical Damage: Broken levers, snapped plastic tabs or wear of the detent mechanism from years of use.
• Electrical Faults: Short circuits, wiring chafing or connector faults can damage the module or its functions.

Replacement And Installation Notes

General replacement procedure (overview for experienced technicians):

1. Disconnect The Battery: Always disconnect the negative terminal and wait an appropriate time for airbag system capacitors to discharge before touching the steering column.
2. Remove Steering Column Covers: Unscrew and separate the upper and lower plastic shrouds to access the stalk connectors.
3. Disconnect Electrical Connectors: Carefully unplug the multi-pin connectors. Note connector positions or take photos to ensure correct reassembly.
4. Remove The Faulty Stalk: Release retaining clips or screws and remove the stalk assembly. In some vehicles partial removal of the steering wheel or airbag may be required—follow the vehicle manufacturer’s procedure.
5. Install The Replacement: Fit the new/used stalk, reconnect connectors, reassemble column covers and reconnect the battery.

Important Safety Note: Always follow the vehicle manufacturer’s repair and safety procedures when working near the airbag and steering column. If unsure, have the replacement performed by a qualified technician.

Installation Recommendations

• Ensure Connectors Are Clean: Clean oxidized or corroded terminals before installation for reliable contact.
• Transfer Required Parts: If the vehicle requires the original radio or cruise-control sub-module or trim pieces, prepare to transfer these from the donor stalk.
• Check Related Systems: After replacement, verify wiper park position, indicator operation, trip computer functions and clear any transient fault codes with appropriate diagnostic tools.
• Use Proper Tools: Avoid forcing clips or screws. Use the correct trim tools to prevent damage to covers and trim.

Why Buy This Part

This multifunction stalk offers a cost-effective way to restore multiple steering-column functions at once. It is especially useful when individual switches fail or when mechanical damage affects several controls. Listing OEM part numbers in the product title and description helps technicians and DIYers quickly identify compatibility during repairs.

Keywords: Delphi COM2003, 96635796XT, 98069979XT, 6242AA, Steering Column Stalk, Multifunction Switch, Peugeot 307 CC, Citroën.

High-quality replacement multifunction stalk designed for Citroën and Peugeot models using the DELPHI COM2003 platform. This steering column switch assembly centralizes lighting and wiper commands, trip computer navigation and stability functions into one ergonomic stalk. Ideal for professional workshops and DIY mechanics who search by part number (96567445XT / 6242A4 / COM2003). Installing a correct multifunction stalk restores full driver control over fog lamps, wipers, cruise control and related convenience functions.

Technical Information

• Manufacturer: Delphi (OEM Supplier For Stellantis)
• Model: COM2003 Multifunction Stalk
• Product Codes: 96567445XT, 6242A4
• Additional Numbers: COM2003
• Recommended Vehicles: Peugeot 206; Peugeot 307 II; Peugeot 406; Peugeot 807; Citroën C5 I; Citroën C8; Berlingo II

Installation Recommendations

• Disconnect Battery: Always disconnect the vehicle battery before starting work and wait at least 10 minutes to allow airbag capacitors to discharge.
• Safety First: Secure the steering wheel in the straight-ahead position and follow manufacturer procedures to avoid damage to the airbag and steering column components.
• Access: Remove steering column trim panels to access mounting screws and the electrical connector for the stalk.
• Connector Handling: Carefully unplug the electrical connector; avoid pulling on the wiring harness and check connector terminals for corrosion before reassembly.
• Function Check: After installation, reconnect the battery and verify all stalk functions (lights, wipers, trip computer navigation, ESP indications, cruise control). Clear any stored fault codes using a diagnostic tool if necessary.

How The Part Is Replaced

Replacement typically involves removing the upper and lower steering column covers, unfastening the mounting screws that secure the stalk to the column, disconnecting the electrical plug, and fitting the new stalk in reverse order. Depending on vehicle equipment, some functions (for example radio controls or cruise functions) may require transferring an additional control module or re-using parts from the original stalk.

Why This Part Fails

• Mechanical Wear: Frequent mechanical use leads to worn contacts and plastic components, causing intermittent or lost functions.
• Contamination: Moisture ingress or dust can corrode electrical contacts inside the stalk or at the connector pins.
• Impact Damage: Damage from accidents or rough handling during previous repairs can break internal levers or mounting points.
• Electrical Faults: Short circuits or voltage spikes in the vehicle electrical system can damage internal electronics on multifunction stalks.

Notes For Mechanics And DIYers

This multifunction stalk is a common service item on older Citroën and Peugeot models. Matching the part number (96567445XT, 6242A4, COM2003) to the vehicle is the fastest way to confirm compatibility. When replacing the stalk, inspect the column wiring and connectors for damage and ensure secure mechanical mounting to avoid rattles and intermittent electrical faults.

High-quality multifunction steering column stalk assembly compatible with a range of Stellantis vehicles. Designed for technicians and experienced DIYers, this Delphi COM2003-based stalk unit replaces worn or faulty controls for lights, wipers, cruise control and more. Commonly searched by reference numbers 96605599XT and 6242A4, this part restores reliable switching and precise control of onboard systems. Ideal when stalks become intermittent, noisy, or fail to engage features such as the trip computer, ESP signals, or wiper functions.

Key Features

• Multifunction Control: Integrates Fog Lights, Trip Computer, Front And Rear Wiper, Wiper Sensor, ESP Signals, Cruise Control And Radio Control (Radio Switch Must Be Supplied Or Transferred).
• Delphi COM2003 Platform: Robust electronic switching technology used across various Citroën and Peugeot models.
• Direct Fit For Many Stellantis Models: Designed as a replacement for original equipment stalks with matching connectors and mounting points.
• Common Reference Numbers Included For Easy Search: 96605599XT, 6242A4, COM2003.

Technical Information

• Manufacturer: Delphi / Compatible With Stellantis (Citroën, Peugeot)
• Model: Steering Column Stalk (Multifunction) – Delphi COM2003
• Product Codes: 96605599XT; 6242A4; COM2003
• Additional Numbers: Reference Often Used In Parts Searches: 96605599XT, 6242A4, COM2003
• Compatibility Notes: Fits Various Citroën And Peugeot Models Listed Below; Verify Connector And Mounting Type Against Existing Unit Before Installation.

Compatible Models (Examples)

Citroën: C5 I, C8, Berlingo II. Peugeot: 206, 307 II, 406, 807. Compatibility May Vary By Year And Equipment Level; Compare Part References Before Ordering.

Installation Recommendations

Follow safe workshop practice when replacing the steering column stalk. Basic replacement steps:

• Disconnect Battery: Always disconnect the negative battery terminal and wait sufficient time for SRS capacitors to discharge before touching airbag components.
• Remove Airbag And Steering Wheel (If Required): Release retaining screws or clips as per manufacturer procedure. Mark Steering Wheel Position To Preserve Alignment.
• Access Stalk Assembly: Remove Column Covers To Expose Switch Unit. Unplug Electrical Connectors And Remove Fasteners Holding The Stalk Module.
• Fit New Unit: Install Replacement Stalk, Reconnect All Plugs, Reassemble Column Covers, Replace Steering Wheel And Airbag. Torque Fasteners To Manufacturer Specification.
• Functional Check: Verify Wipers, Washers, Fog Lights, Trip Computer Functions, Cruise Control And Radio Controls Operate Correctly Before Returning Vehicle To Service.

Note: Airbag And Steering Wheel Work Should Be Performed By A Trained Technician If You Are Not Experienced. Use Appropriate Tools And Follow Manufacturer Safety Procedures.

Why This Part Fails

• Mechanical Wear: Frequent Use Causes Switch Contacts And Mechanical Linkages To Wear, Leading To Intermittent Or Failed Operation.
• Electrical Contact Degradation: Carbon Tracks And Contact Surfaces Can Become Worn Or Oxidized, Causing Loss Of Function.
• Moisture And Corrosion: Water Ingress Or High Humidity Can Corrode Connectors Or Internal Contacts, Especially Around The Windscreen Sealing Area.
• Impact Or Physical Damage: Collisions, Improper Removal, Or Forced Operation May Break Switch Levers Or Mounting Points.

Practical Tips For Mechanics And DIYers

• Compare The Old Unit To The New One Visually And Match Connector Types And Pinouts.
• Check Related Fuses And Wiring If Symptoms Are Sporadic Before Replacing The Stalk.
• When Reusing A Radio Or Cruise Control Button, Ensure Proper Transfer Of Sub-Components If Required.
• Search By Part Number (96605599XT / 6242A4 / COM2003) For Fast Identification And Matching.

Warranty And Quality

Sold As A Replacement Steering Column Stalk Intended For Professional Fitment. Part Condition And Warranty Depend On The Seller; Check The Specific Offer For Coverage Details.

Drivers under the steering wheel Delphi COM2000 for Citroën/Peugeot – original used part with codes 96451821ZL and 6242G5. It is a complete module under the steering wheel (switch below the steering wheel), which ensures everyday control of lights and wipers. The ideal replacement for a fault of the direction lights, wipers or horn, when it is often found according to code 6242G5 / 96451821ZL.

Module function: control of dipped/long -distance and fog lights, rudders, front and rear wiper and washer, horn and on -board computer. It also supports automatic wiper modes (in rain sensor cars).

Compatibility according to models: Peugeot 206, 307 I, 406, 807 and Citroën C5 I, C8, Berlingo II, Partner II, Xsara and Xsara Picasso. Always verify the match by the part number and connectors to your original unit, because the dog used multiple variants of COM2000 according to the equipment.

Typical manifestations of defects and reasons of exchange: spontaneous flashing or ripples, non -functional horn, irregular wiper operation, non -return lever to the basic position or occasional loss of contact. The cause is mechanical wear of internal contacts and microswitches due to age and frequent use.

Installation notes: The replacement takes place under the steering wheel. Always disconnect the battery for safety reasons and wait a few minutes before dismantling the airbag. After removing the steering wheel, the COM2000 is released from the shaft and disconnects the connectors. During the installation, pay attention to the correct centenance and locking of the unit. In most cases, the plug & play; For some cars, the basic settings/configuration of functions via the diameter/lexia may be required after assembly (eg the presence of fog lights or rear wiper is controlled by BSI configuration).

technical information

• Manufacturer: Delphi (PSA Citroën/Peugeot)
• model: COM2000 – module lever under the steering wheel
• Product codes: 96451821zl, 6242G5
• Other numbers: 96 451 821 ZL, 6242.G5, COM2000

Tip for the correct selection: Compare the label on your original episode (numbers 9645… / 6242…) and the shape / number of connectors. Code agreement significantly increases the certainty of compatibility within the vehicle equipment.

Product Overview

High-quality cruise control stalk (steering column switch) designed for Citroën and Peugeot passenger cars equipped with the COM2008/COM2000 control systems. Ideal for professional workshops and experienced DIYers who perform steering-column electrical repairs. This switch restores cruise control and speed limiter functions, improving driver comfort and safety. Commonly searched by part numbers 96655861XT, 96655861ZD and reference 6242.ZS.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: COM2008 / COM2000 (control unit type); Fits many vehicles from 2008 onward
• Product Codes: 96655861XT, 96655861ZD, 96655861DZ
• Other Numbers: 6242.ZS, 6242ZS

Fitment / Compatible Models

Typical fitment includes, but is not limited to: Citroën C3 II, DS3, C5 II, C8, Berlingo III; Peugeot 206, 308 (T9), 407, 807, Partner III, Expert II, Jumpy II. Also compatible with other Citroën and Peugeot models equipped with COM2008/COM2000 steering column controls.

Function and Features

The stalk assembly provides user control for cruise control and speed limiter functions: set, resume, accelerate/decelerate and cancel. It interfaces with the vehicle’s COM module and sends switch signals to the engine management and convenience systems. Constructed with electrical contacts and mechanical switches designed for frequent use; replacement restores reliable button response and system interaction.

Installation Recommendations

• Safety First: Always disconnect the battery before starting work and follow the vehicle manufacturer’s instructions to avoid damage to steering column electronics and airbags.
• Basic Steps: Remove lower and upper steering column trim, unfasten retaining screws, unplug the connector from the old stalk, remove the stalk and install the new unit in reverse order.
• Tools: Common trim tools, Torx/Phillips screwdrivers and a small ratchet set are usually sufficient. Use anti-static precautions if available.
• Electronics: In most COM2008/COM2000 installations the stalk is plug-and-play and functions immediately after installation. In some vehicle configurations adaptation or coding with a PSA diagnostic tool (DiagBox/Lexia) may be required to enable all functions.
• Testing: After reassembly and battery reconnection, verify all stalk functions (set, resume, +/-, cancel) and check for any fault codes on the dashboard.

Why This Part Most Commonly Fails

• Wear Of Electrical Contacts: Frequent use causes contact erosion or intermittent signals, leading to unresponsive or erratic cruise control operation.
• Mechanical Damage: Breakage of plastic levers or internal components due to impact, rough handling during steering column repairs or aging.
• Corrosion And Moisture Ingress: Environmental exposure or condensation can corrode contacts and connectors, producing faults.
• Connector/Cable Issues: Loose or damaged wiring at the plug causes intermittent loss of function.
• Symptoms To Watch For: Cruise not engaging, buttons intermittently non-responsive, stuck stalk, or persistent control-related fault messages on the dash.

Recommendation

If the stalk shows intermittent faults or physical damage, replacement is the most reliable remedy. For workshops, inspect connector pins and harness condition before replacing; for DIY repairs, follow the safety and installation steps closely and confirm full system operation after fitting.

Driving drivers (combined switch) Delphi COM2005 for Citroën C8 and Peugeot 807 equipped with ESP. The unit brings together the functions of light and fog light control, front and rear wiper and washer, on -board computer, cruise control and car radio control. It is an original part with codes 96660155XT, 98070111XT and 6242FS.

The correct COM module is essential for flawless cooperation with ESP and other comfort systems. If there are random outages of turn signals or wipers, the non -functional buttons on the levers, the point of the angle of the steering wheel (ESP) or the problems with cruise control and radio control, the wear of the unit is the cause of this unit. Replacement for the corresponding type by part number usually removes these problems.

Mounting tips: Always disconnect the battery before dismantling and wait a few minutes for the airbag. It is usually necessary to remove the airbag and the steering wheel, remove the plastic steering column covers and release the module connectors. Pay attention to the cenning of the cable/spiral and do not manipulate it off the center. For ESP cars, it is advisable to perform the basic settings/calibration of the steering wheel rotation sensor after assembly and, if necessary, check the unit configuration (BSI) diagnostics (Lexia/Diagnox), especially if the car equipment varies (cruise control, radio control).

Compatibility: Designed for Citroën C8 and Peugeot 807 in selected ESP versions. To ensure 100% match, please compare the parts of the parts on the label of your original module with the codes listed. Match the designation is crucial for these parts.

technical information

• Manufacturer: Delphi
• Model: COM2005, version for ESP vehicles (integrated steering wheel angle sensor)
• product codes: 96660155XT; 98070111XT; 6242FS
• additional numbers: 6242.fs; COM2005

Advantages of this solution: Full integration with ESP thanks to the integrated angle sensor of rotation, correct cruise control function and radio control after steering wheel, quality Delphi processing and compatibility with PSA electrical architecture. Ideal for quick and certain repair without unnecessary compromises.

Original combined switch below the Delphi COM2000 steering wheel for Citroën and Peugeot. Suitable as a replacement for defective rudder, lights and wipers on models with multiplex wiring. This module (dog codes 96511179XT, 6242C2) is often sought by part number and replaces the unavailable original (NFP). Ideal for Citroën C5 I, C8, Berlingo II and Peugeot 206, 307, 807, Partner II – Always compare numbers and connectors before ordering.

The function and equipment of the module vary according to the version of the car: usually includes fog lights, wipers (including rain sensor, if equipped with) the rear wiper, on-board computer, cruise control and car radio control. For the radio controller, it may be necessary to add or transfer the existing control from your car. If you are dealing with spontaneous switching of lights/wiper, impaired blinker return or non -functional switching of on -board computer modes, the replacement of the COM2000 module is a common and effective solution.

Installation notes: The replacement is removed by removing the steering wheel and plastic steering column covers. Always disconnect the battery for safety reasons and wait at least 10 minutes before handling the airbag. Then disconnect the module connectors, release the lock and replace the piece with a piece. In most cases, the installation of plug & play; Activation of cruise control (if the car did not have before) may require diagnostics and permission to function in BSI/ECU. Compare the position and type of connectors, the lever and the equipment (fog lights, rain sensor, radio control).

technical information

• Manufacturer: Delphi (COM2000)
• Model: Citroën C5 I, C8, Berlingo II; Peugeot 206, 307, 807, Partner II
• Product codes: 96511179XT, 6242C2
• Other numbers: 624231, 9239p3

This is the original part of the removal. Before purchasing, please carefully verify the match by the number of the part and equipment of the car; Different variants of COM2000 differ according to functions (fog lights, rain sensor, cruise control, radio control). Thanks to accurate pairing according to OEM codes (96511179XT, 6242C2, 624231, 9239p3), you minimize the risk of incompatibility and get a reliable replacement for the original module, which is already kept as NFP.

COM2000 steering wheel driver from Delphi for Citroën and Peugeot. The module brings together the rudder and light levers, fog lights, front and rear wiper controls, horn and, according to the equipment, also controls the car radio and cruise control. It is an original used part of the dog, ideal as a replacement for a defective switch. It is also wanted under codes 96511180XT and 6242C3.

Suitable solution for frequent COM2000 defects: spontaneous shutdown or inaccurate automatic return of turn signals, wiper speeds, non -functional fog lights, occasional clampson malfunction or airbag error caused by defective spiral cable in the ring under the steering wheel. Replacement of the complete unit gets a quick and reliable repair without lengthy diagnostics of individual subcovers.

As a rule, the assembly is simple: when the battery is disconnected (wait at least 10 minutes due to the airbag system), the airbag and the steering wheel are removed, the Bajonet COM2000 is unlocked, the connectors disconnect and the spare part is deployed. For some equipment it is necessary to transfer a separate cruise control driver or radio control to the new unit. When handling the spiral airbag cable, make sure to maintain its center position.

technical information
Manufacturer: Delphi (COM2000)
Model: Citroën C8, Citroën Xsara, Citroën Xsara Picasso, Peugeot 206, Peugeot 807
product codes: 96511180XT, 6242C3
Other numbers: 624227, 6239AV, 6239P5, 6239PP, 6239Q9, 6239wy, 6239V9

Before purchasing, we recommend verifying the match according to the OEM code and equipment of your car (fog lights, radio control, cruise control, rear wiper). Match by part number is the safest way to ensure full compatibility without the need for modifications.

Looking for reliable auto parts for your Citroën or Peugeot? Our ESP Controller COMEV3_CEM1 is compatible with multiple models of these brands. This component is essential for the proper function of various comfort and safety features in your vehicle.

This controller facilitates easy operation of your vehicle’s functions such as fog lights and onboard computer. It also controls front and rear wipers, rain sensor, cruise control, and the car radio. Importantly, it manages the ESP system, enhancing driving safety during adverse conditions or rapid maneuvers.

Technical Information

• Manufacturer: Delphi
• Models: Citroën Berlingo III, Peugeot Partner III
• Product Codes: COMEV3_CEM1, COM2005
• Additional Numbers: 98062248XT, 98200131XT, 98200120XT

Installation of this controller is relatively straightforward and quick, which is appreciated by both professional auto mechanics and skilled vehicle owners who prefer DIY maintenance and repairs. It is often searched for under the product codes listed above, making online purchase an efficient option that saves time compared to physical stores.

By investing in high-quality, used auto parts like this controller, you can maintain your vehicle in excellent technical condition without incurring excessive costs. This specific controller is fully functional and ready for installation and daily use.

Secure this key component for your vehicle to enjoy the comfort and safety benefits few replacement parts can offer. Don’t remain behind the wheel without the essential controls and monitoring guaranteed by this controller.