Product Overview

High-quality cruise control stalk (steering column switch) designed for Citroën and Peugeot passenger cars equipped with the COM2008/COM2000 control systems. Ideal for professional workshops and experienced DIYers who perform steering-column electrical repairs. This switch restores cruise control and speed limiter functions, improving driver comfort and safety. Commonly searched by part numbers 96655861XT, 96655861ZD and reference 6242.ZS.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: COM2008 / COM2000 (control unit type); Fits many vehicles from 2008 onward
• Product Codes: 96655861XT, 96655861ZD, 96655861DZ
• Other Numbers: 6242.ZS, 6242ZS

Fitment / Compatible Models

Typical fitment includes, but is not limited to: Citroën C3 II, DS3, C5 II, C8, Berlingo III; Peugeot 206, 308 (T9), 407, 807, Partner III, Expert II, Jumpy II. Also compatible with other Citroën and Peugeot models equipped with COM2008/COM2000 steering column controls.

Function and Features

The stalk assembly provides user control for cruise control and speed limiter functions: set, resume, accelerate/decelerate and cancel. It interfaces with the vehicle’s COM module and sends switch signals to the engine management and convenience systems. Constructed with electrical contacts and mechanical switches designed for frequent use; replacement restores reliable button response and system interaction.

Installation Recommendations

• Safety First: Always disconnect the battery before starting work and follow the vehicle manufacturer’s instructions to avoid damage to steering column electronics and airbags.
• Basic Steps: Remove lower and upper steering column trim, unfasten retaining screws, unplug the connector from the old stalk, remove the stalk and install the new unit in reverse order.
• Tools: Common trim tools, Torx/Phillips screwdrivers and a small ratchet set are usually sufficient. Use anti-static precautions if available.
• Electronics: In most COM2008/COM2000 installations the stalk is plug-and-play and functions immediately after installation. In some vehicle configurations adaptation or coding with a PSA diagnostic tool (DiagBox/Lexia) may be required to enable all functions.
• Testing: After reassembly and battery reconnection, verify all stalk functions (set, resume, +/-, cancel) and check for any fault codes on the dashboard.

Why This Part Most Commonly Fails

• Wear Of Electrical Contacts: Frequent use causes contact erosion or intermittent signals, leading to unresponsive or erratic cruise control operation.
• Mechanical Damage: Breakage of plastic levers or internal components due to impact, rough handling during steering column repairs or aging.
• Corrosion And Moisture Ingress: Environmental exposure or condensation can corrode contacts and connectors, producing faults.
• Connector/Cable Issues: Loose or damaged wiring at the plug causes intermittent loss of function.
• Symptoms To Watch For: Cruise not engaging, buttons intermittently non-responsive, stuck stalk, or persistent control-related fault messages on the dash.

Recommendation

If the stalk shows intermittent faults or physical damage, replacement is the most reliable remedy. For workshops, inspect connector pins and harness condition before replacing; for DIY repairs, follow the safety and installation steps closely and confirm full system operation after fitting.

Overview

High-quality used steering column control module (Valeo COM2003) tailored for Citroën C5 II and Peugeot 407 equipped with ESP. This multi-function stalk assembly manages lighting and convenience functions at the driver’s fingertips — ideal for professional garages and skilled DIY mechanics who need a direct replacement part by product number.

Technical Information

• Manufacturer: Valeo
• Model: Citroën C5 II, Peugeot 407
• Product Codes: 96486272XT, 6242S6
• Additional Numbers: 6239JP, 6242Z6, COM2003

Compatibility

Designed for Citroën C5 II and Peugeot 407 models fitted with ESP where the COM2003 steering column control is specified. Commonly searched by the product numbers above, which helps technicians find the correct replacement quickly.

Function

• Controls Fog Lights
• Operates Trip/Board Computer
• Interfaces With Rain Sensor
• Integrates With ESP Functions
• No Rear Wiper Control On This Unit

Replacement Guide

Recommended for experienced mechanics or competent DIYers. Typical replacement procedure:

• Disconnect the negative battery terminal and wait at least 10 minutes to ensure airbag circuits are de-energized.
• Remove the steering wheel airbag and steering wheel following the vehicle manufacturer’s instructions and torque settings.
• Remove steering column trim pieces to access the stalk assembly; retain all screws and clips.
• Disconnect the multi-pin electrical connector(s) from the stalk module and release any retaining clips.
• Remove the old stalk and install the replacement, ensuring correct orientation and secure fastening.
• Reconnect the electrical connectors and reassemble trims and steering wheel. Reconnect the battery and check all functions (indicators, fog lights, trip computer, rain sensor response and ESP indicators).

Installation Recommendations

• Always follow the vehicle manufacturer’s removal and installation procedures to avoid damage to the airbag and steering column components.
• Use correct torque values for steering wheel fasteners and ensure the steering wheel is aligned before final tightening.
• Verify electrical connectors are fully seated and locking tabs engaged to prevent intermittent faults.
• After installation, confirm that ESP and instrument-cluster warnings are not present; if any warning lights remain, perform diagnostic checks with appropriate PSA diagnostic tools.

Why This Part Fails Most Often

Steering column controls are subject to frequent mechanical and electrical wear. Common failure causes include:

• Mechanical Wear: Repeated use wears internal plastic detents and return springs, causing looseness—the turn signal stalk looseness noted on this unit is typical.
• Contact Wear and Arcing: Electrical contacts can oxidize or pit over time, leading to intermittent operation of lights and switches.
• Moisture Ingress and Corrosion: Exposure to humidity or water infiltration can corrode contacts and connectors.
• Physical Damage: Impact or forceful handling during steering wheel removal/installation can break plastic parts.

Notes For Buyers

This is a used but fully functional unit. It is a direct replacement often located by the product codes listed above. Suitable for professional installation; recommended inspection of connector condition and steering column components during fitting to ensure long-term reliability.

High-quality used steering column control unit (stalk assembly) VALEO COM2003 designed for Citroën C5 II and Peugeot 407 models equipped with ESP. Ideal for professional workshops and DIY enthusiasts who search by OE numbers such as 96473051XT or 6242T0. This unit operates fog lights, the onboard trip computer, rain sensor input and ESP-related switching. The stalk is fully operational; occasional play in the turn-signal lever is noted but does not affect functionality.

Technical Information

• Manufacturer: Valeo
• Model: Citroën C5 II, Peugeot 407
• Product Codes: 96473051XT, 6242T0, COM2003
• Other Numbers: 6242Z6, 6242S6, NFP

Function And Application

This steering column control unit consolidates multiple driver controls into a single stalk assembly. Typical Functions Include:

• Activation Of Front Fog Lights
• Operation Of Trip Computer / Onboard Display Controls
• Integration With Rain Sensor (Input Signal)
• ESP Related Switch Signals
• Turn Signal And Light Flash Functions (Note: No Rear Wiper Control On This Version)

Replacement Procedure

Basic Replacement Steps For A Workshop Or Experienced DIYer:

• Disconnect The Battery Before Starting To Prevent Short Circuits And Airbag Deployment.
• Remove Steering Column Trim Panels To Access The Stalk Mounting Screws.
• Unscrew The Mounting Fixings And Carefully Pull The Stalk Assembly From The Column.
• Disconnect Electrical Connectors, Noting Clip Locations And Any Locking Tabs.
• Fit The Replacement Unit, Reconnect All Plugs, And Reassemble Trim Panels.
• Reconnect The Battery And Verify All Functions: Indicators, Fog Lights, Trip Computer Controls, Rain Sensor Response, And ESP Signals.

Installation Recommendations

• Always Disconnect The Battery Before Removal/Installation And Follow Manufacturer Procedures To Avoid Damage To The Unit Or Airbag System.
• Use Appropriate Screwdrivers And Torque Settings To Avoid Stripping Fasteners Or Cracking Trim.
• Inspect Electrical Connectors For Corrosion Or Bent Pins; Clean Contacts If Necessary Before Reassembly.
• After Installation, Run A Full Functional Check And Clear Any Stored Fault Codes Using Workshop Diagnostic Equipment If Required.
• If The Vehicle Has Steering Angle Or Sensor Calibration Procedures, Perform Those Steps Per Manufacturer Recommendations.

Most Common Failure Causes

• Mechanical Wear Of The Stalk Mechanism Leading To Increased Play Or A Loose Feeler.
• Contact Wear Or Oxidation On Internal Switch Contacts Causing Intermittent Signals.
• Moisture Ingress Or Contamination From Spills That Affect Electrical Contacts.
• Connector Damage Or Broken Wiring In The Column Area Due To Previous Repairs Or Improper Handling.
• Impact Damage From Airbag Deployment Or Steering Column Collision.

Notes For Mechanics And DIYers

This part Is Frequently Searched By OE Numbers (96473051XT, 6242T0, 6242Z6, 6242S6) And By The VALEO COM2003 Designation. Suitable For Citroën C5 II And Peugeot 407 Vehicles Equipped With ESP. The Unit Is Offered As A Used, Fully Functional Item; Observed Slight Play In The Indicator Stalk Does Not Affect Electrical Operation.

Product Overview

High-quality Valeo COM2003 steering column switch assembly designed for Citroën C5 II and Peugeot 407 models equipped with ESP. The module integrates controls for front fog lights, on-board computer functions, rain sensor input and ESP actions. This used unit is fully operational; note that the turn signal stalk may feel slightly loose due to normal wear but operates reliably without skipping.

Key Features

• Direct replacement for original Valeo COM2003 steering column switch.
• Controls: Fog Lights, Trip/On-Board Computer, Rain Sensor Input, ESP interactions.
• Designed for vehicles without rear wiper control on the stalk.
• OEM-level fitment for Citroën C5 II and Peugeot 407 electrical systems.
• Ideal for mechanics and experienced DIY installers seeking a cost-effective, functioning replacement.

Technical Information

• Manufacturer: Valeo
• Model: Fits Citroën C5 II, Peugeot 407 (Vehicles with ESP)
• Product Codes: 96592431XT, 6242T0, COM2003
• Additional Numbers: 6242Z6, 6242S6
• Condition: Used, Fully Functional

How To Replace (High-Level Guide)

Replacement should be performed by a competent technician or an experienced DIYer familiar with steering column work and airbag safety.

• Disconnect Battery: Always disconnect the negative battery terminal and wait at least 10 minutes to ensure airbag capacitors discharge.
• Steering Wheel Position: Mark the steering wheel position relative to the shaft to ensure correct alignment on reassembly.
• Remove Trim And Airbag: Carefully remove the steering wheel trim and airbag module following manufacturer procedures. If unsure, have a professional perform this step.
• Access Switch Assembly: Remove steering column covers to expose the multifunction switch assembly. Unscrew the retaining fasteners.
• Unplug Connectors: Carefully disconnect electrical connectors from the switch assembly; do not force pins.
• Install Replacement: Fit the Valeo COM2003 unit, reconnect connectors, reassemble covers and airbag, and reconnect the battery.
• Function Check: Verify indicators, fog lights, trip computer functions, rain sensor and ESP-related signals before road testing.

Installation Recommendations

• Use appropriate tools and follow Citroën/Peugeot workshop procedures for airbag removal and steering column work.
• Do not force electrical connectors; inspect pins for corrosion or damage and clean if necessary.
• After fitting, perform a full function check of the stalks (indicators, fog lamps, on-board computer scrolling) and perform a road test to confirm proper operation of ESP interactions.
• If any dashboard warnings appear after installation, consult diagnostic equipment to read fault codes and clear adaptions if required.

Why This Part Fails

• Mechanical Wear: Frequent use causes wear of internal contacts, springs and plastic detents—leading to loosened stalks or intermittent signals.
• Electrical Contact Degradation: Carbon tracks and contact surfaces can wear or oxidize, causing loss of function or intermittent operation.
• Ingress And Corrosion: Moisture or contamination entering the column area accelerates corrosion of connectors and contacts.
• Physical Damage: Improper handling or impact (e.g., during steering wheel removal) can crack housings or break internal levers.

Compatibility Notes

This Valeo COM2003 steering column switch is commonly fitted to Citroën C5 II and Peugeot 407 models equipped with ESP. Verify the product codes 96592431XT, 6242T0, 6242Z6 or 6242S6 against the part you are replacing to confirm fitment. In many cases the assembly is a direct plug-and-play replacement, but some vehicles may store adaptations in the central electronics (BSI) that require diagnostic checking after installation.

Why Choose This Unit

Choosing this used Valeo COM2003 unit gives a cost-effective way to restore full stalk functionality on Citroën C5 II and Peugeot 407 vehicles without replacing larger modules. It is suitable for professional workshops and experienced DIY mechanics who want reliable replacement parts with original equipment fitment and proven functionality.

If you are searching for reliable stalk switches for your Citroën or Peugeot, these units deliver efficient and accurate control, ensuring your vehicle’s electronic commands operate smoothly. Perfect for professional mechanics and DIY enthusiasts looking for a cost-effective replacement part.

The stalk switches are located beneath the steering wheel and fit models COM2003 VALEO, tailored for Citroën C5 II and Peugeot 407. They enable effortless management of multiple functions such as lighting systems, fog lamps, the radio, cruise control, and all wiper functionalities including sensors essential for the ESP system.

Technical Information

• Manufacturer: PSA
• Models:
  • Citroën C5 II
  • Peugeot 407
• Product Codes: 96476537XT, 6242S9
• Additional Numbers: NFP

Ensure your Citroën and Peugeot vehicles receive the reliable control they deserve. These stalk switches significantly enhance driving comfort and contribute to safer road conditions. Offering excellent value for money, this part is ideal for anyone seeking an efficient and economical solution to restore their vehicle’s controls.

With this used auto part, you can expect optimal functionality and good technical condition, ensuring your car performs as intended. All components are carefully checked to meet high standards of quality and reliability.

Searching for reliable replacement parts for your Citroën or Peugeot? Our control stalks, identified by product code 96592429XT, provide a durable and dependable solution to restore full functionality to your vehicle’s commands, ensuring smooth operation of key systems without compromise.

These control stalks were carefully removed from Citroën C5 II and Peugeot 407 models, ensuring optimal compatibility and performance. Whether you are performing a repair or upgrading your vehicle’s controls, these parts offer high reliability and long-lasting service life.

Technical Information

• Manufacturer: Valeo
• Model: Citroën C5 II, Peugeot 407
• Product Codes: 96592429XT, 6242S9
• Additional Numbers: NFP

This product features straightforward replacement and installation without requiring special tools, making it suitable for professional mechanics as well as home DIY enthusiasts. Its functions include controlling front and rear wipers, wiper sensors, ESP, lights including fog lamps, and cruise control, all of which contribute to enhanced safety and driving comfort. Installation may require transferring the existing stalk component, which is a common practice when replacing this part.

When it comes to spare parts for Citroën and Peugeot, our used control stalks offer an excellent balance of price and quality that meets your expectations. Whether you are a professional mechanic or an automotive enthusiast, these steering column control stalks will perfectly meet your repair and maintenance needs.

Looking for reliable and high-quality used auto parts for Citroën or Peugeot vehicles? We offer a steering column control switch compatible with Citroën C5 II and Peugeot 407 models. This part is designed for precise control of lights, fog lamps, radio, cruise control, and other vehicle functions directly from the steering wheel.

This auto part is essential for comfortable and safe driving, allowing easy access to control the windshield wipers, including the wiper sensor and ESP. It provides greater control over your vehicle in complex or unpredictable driving conditions.

Technical Information

• Manufacturer: Valeo
• Model: Citroën C5 II, Peugeot 407
• Product Codes: 96611304XT, 6242S9
• Additional Numbers: NFP

This steering column control switch is engineered for seamless integration with the vehicle’s electronic system. Installation is quick and simple, appreciated by both professional mechanics and car enthusiasts who prefer to handle minor repairs independently. If your work involves the repair and maintenance of Citroën and Peugeot vehicles, this part is a perfect choice.

Investing in a verified and high-quality used part is economically beneficial and environmentally friendly. Choose a steering column control switch that offers the reliability and performance you expect from your vehicle.

Add this steering column control switch to your cart and secure a quality part you can trust. Revitalize your Citroën or Peugeot with confidence in the dependability and proven quality of used auto parts.

Product Overview

This used cruise control stalk switch is designed for a range of Citroën and Peugeot vehicles equipped with the COM2005 steering-column control system. Ideal for professional workshops and DIY mechanics, the switch restores cruise-control functions such as set, resume, accelerate and decelerate. Common search terms: Cruise Control Stalk, Steering Column Switch, 96663636XT, 6242Z8, COM2005, Citroën C5, Peugeot 407.

Fitment And Compatibility

Typical fitment includes many models from 2005 onwards. Common compatible vehicles (non-exhaustive):

• Citroën C5 II, C8, Berlingo III, C4 (selected versions)
• Peugeot 206, 407, 807, Expert II, Jumpy II, Partner III

Compatibility depends on the vehicle’s steering-column electronics version (COM2005). Check the part numbers below to match the original item.

Replacement Procedure

Basic replacement steps for a qualified mechanic or experienced DIYer:

• Disconnect the negative terminal of the battery and wait at least 10 minutes to ensure airbag circuits are fully de-energized.
• Remove the steering-wheel trim and lower/upper column covers to access the stalk assembly.
• Unplug the electrical connector(s) from the old stalk and remove fixing screws/clips.
• Fit the replacement stalk, secure fasteners and reconnect the electrical connector(s).
• Reassemble covers and reconnect the battery. Perform a functional test of cruise-control functions and steering-column switches.

Installation Recommendations

• Always disconnect the battery before starting work and follow the vehicle manufacturer’s safety procedures to avoid airbag deployment or damage to electronics.
• Inspect connectors and wiring for corrosion or damage; clean contact surfaces if required.
• When reassembling, ensure no wiring is pinched and that all fasteners are torqued to the correct specification.
• After installation, verify cruise-control operation and any related warning lights; if errors persist, investigate steering-column control units and fault codes with appropriate diagnostic tools.

Why This Part Commonly Fails

Stalk switches are subject to frequent mechanical use and environmental exposure. Typical failure causes include worn or dirty electrical contacts, broken internal microswitches, mechanical wear of the stalk mechanism, moisture ingress and intermittent connector contacts. Symptoms often include non-responsive set/resume buttons, sporadic operation or complete loss of cruise-control commands.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Steering Column Cruise Control Stalk (COM2005)
• Product Codes: 96663636XT, 9663636XT, 6242Z8
• Other Numbers: COM2005

Notes

This is a used replacement part. It is supplied as a direct-fit steering-column stalk for vehicles using the COM2005 controls. Do not attempt repairs on airbag or steering-column systems without proper training and safety precautions.

Overview

This replacement cruise control stalk is designed for Citroën and Peugeot steering columns and is suitable for workshops and experienced DIY mechanics. It provides reliable control of set speed, resume and adjust functions and is compatible with vehicles using COM2003 and later on-board control modules. The part is commonly searched and ordered by its product numbers, so the listed codes below will help you find the correct unit quickly.

Key Features

• Direct plug-and-play connection to OEM wiring harness on compatible models (subject to controller type).
• Designed for vehicles from 2005 onward using COM2003/COM2005 and newer systems.
• Maintains original steering column ergonomics and lever feel.
• Suitable for professional installation or experienced DIY replacement.

Installation Guidance

Basic replacement steps for a competent mechanic or an experienced DIYer:

• Disconnect the vehicle battery before starting to avoid short circuits and to protect airbag and electronic modules.
• Remove the steering column trim panels to access the stalk mounting screws and wiring connector.
• Unplug the connector and remove the mounting screw(s) holding the old stalk in place.
• Fit the new stalk, secure it with screws, reconnect the wiring connector and reassemble the trim panels.
• Reconnect the battery and verify cruise control functions on a safe road test. If the vehicle uses advanced body modules, follow any required initialization procedure for the COM unit.

Recommendation For Installation

Always follow manufacturer procedures when removing trim and handling airbag-equipped steering columns. If the vehicle shows electrical faults after fitting, check connector contacts and fuses first. For vehicles integrated with complex COM or BCM modules, perform the final function check with appropriate diagnostic equipment. Use threadlocker on screws if recommended by the vehicle workshop manual.

Why This Part Fails Most Often

• Wear Of Internal Contacts: Frequent use causes contact wear and intermittent operation.
• Mechanical Damage: Physical stress or impact during steering column service can break the lever or its mounting points.
• Corrosion Or Moisture Ingress: Corrosion of connector pins leads to poor electrical contact and failure.
• Connector Or Wiring Issues: Damaged wiring or loose connectors cause loss of function before the stalk itself is considered faulty.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: 206; 407; 807; Berlingo III; C5 II; C8; Expert II; Jumpy II; Partner III; Citroën C5; Citroën C6; Peugeot 407 (Includes Other Compatible Models From 2005 Onwards)
• Product Codes: 96470494XT; 96637157XT; 96663636XT; 6242Z8
• Other Numbers: 6242.Z8 (Alternative Notation)

Notes For Mechanics And DIYers

Customers often search by part number—use the codes above when locating stock. Confirm controller type (COM2003 or later) before installation to ensure compatibility. If unsure about initialization requirements for the vehicle’s control modules, consult the vehicle service manual or use professional diagnostic equipment.

Description

High-quality Valeo COM2003 multifunction stalk assembly designed for Citroën C5 II and Peugeot 407 models. The unit operates fog lights, trip computer functions, rear wiper, rain sensor input and ESP-related switching. Ideal for professional workshops and experienced DIY mechanics looking for a direct replacement part that restores complete steering-column control functions. Commonly searched under part numbers 96592428XT, 6242S5, 6239JQ or COM2003.

Technical Information

• Manufacturer: Valeo
• Model: Citroën C5 II; Peugeot 407
• Product Codes: 96592428XT, 6242S5, COM2003
• Additional Numbers: 6239JQ, NFP

Fitment

Direct fit for Citroën C5 II and Peugeot 407 MPI models equipped with Valeo COM2003 electrical architecture and ESP. Verify the physical connector and mounting arrangement before installation — this part is typically cross-referenced by the listed product codes.

Installation

Recommended general procedure for replacement (work should be performed by a qualified technician or an experienced DIYer comfortable with steering-column work):

• Disconnect the negative battery terminal and wait the manufacturer-recommended time to ensure airbag circuits are safe.
• Remove the steering wheel airbag and steering wheel following manufacturer instructions to avoid damage to SRS components.
• Remove upper and lower steering column shrouds to access the stalk assembly.
• Unplug electrical connectors and release retaining clips securing the stalk unit.
• Fit the replacement stalk assembly, secure clips, and reconnect all connectors.
• Reassemble the column covers and refit the steering wheel and airbag. Reconnect the battery.
• Test all functions: indicators, fog lights, wipers, trip computer controls, rain sensor response and ESP-related feedback. Clear any stored fault codes with a diagnostic tool if necessary.

Mounting Recommendations

• Always disconnect the battery before starting work and follow the vehicle manufacturer’s safety procedures to prevent SRS damage.
• Inspect connectors for corrosion or damaged pins and clean before reassembly to ensure reliable electrical contact.
• Handle the airbag and steering wheel with care; do not place the airbag face down.
• If fault codes or warning lights remain after replacement, use a diagnostic scanner to read and clear codes and verify sensor calibrations.

Why It Fails

Multifunction stalks commonly fail due to mechanical wear of internal contacts and levers, contamination from moisture or dirt, broken plastic detents or springs from repeated use, and connector corrosion. Intermittent operation, stuck or loose stalks, or loss of specific functions (e.g., fog lights or wiper control) are typical symptoms. Heavy use, exposure to moisture, and mechanical stress during steering column repairs increase the likelihood of failure.

Notes For Professionals

Because this is a used unit, expect slightly reduced stiffness compared with a new switch; however, full electrical functionality is maintained. Keep spare fasteners and inspect the steering column for worn mounting points while replacing the stalk to ensure a long-lasting repair.