This steering wheel control module is a direct-fit switch cluster designed for Citroën/Peugeot Group vehicles. It restores complete steering wheel button functionality — audio, phone and menu control inputs — and is ideal for professional workshops and DIY mechanics who search by part number. The module is a practical replacement for faded, damaged or intermittently working controls and keeps original steering wheel ergonomics and electrical interfaces.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model(s): Citroën C4 II, DS4, DS5, Peugeot 508, Partner II (as listed)
• Product Codes: 96720447ZD, 98094695ZD
• Additional Numbers: 96759249XT, 98000200ZD, 6243C4

Installation Recommendations

1. Disconnect the negative battery terminal and wait at least 10 minutes to disable the airbag system before starting work.
2. Remove the airbag module from the steering wheel following the vehicle manufacturer’s procedure.
3. Unscrew the retaining fasteners and carefully detach the steering wheel trim to access the switch module.
4. Disconnect electrical connectors and remove the old switch module. Take care with fragile plastic clips and ribbon cables.
5. Fit the replacement module, reconnect all plugs, and reassemble in reverse order. Ensure airbag and steering wheel fasteners are torqued to manufacturer specifications.
6. Reconnect the battery and verify full functionality of all steering wheel controls, voice/phone buttons and menu navigation.

Why This Part Fails Most Often

Steering wheel switch modules typically fail due to wear and mechanical damage rather than simple electrical aging. Common causes include worn contact pads from heavy use, broken or detached plastic/chrome trim (as in this unit), moisture ingress causing corrosion, short circuits after liquid spills, and physical damage from impacts or airbag deployment. Intermittent function can also be caused by connector issues or a faulty clock spring in the steering column, so inspect surrounding components when diagnosing.

Benefits of replacing this unit: restores factory control functionality, maintains resale value, and avoids more expensive electrical work if the problem is localized to the switch module. Because many buyers search by product number, the included codes help you confirm fitment quickly.

Multifunction Stalk Switch Designed For Workshop And DIY Use. This COM2008P steering column module provides direct control of lighting, indicators, wipers and on-board computer functions. Ideal for mechanics and experienced car owners who need a reliable replacement part for Citroën and Peugeot models, it is frequently searched by OEM references and product codes (see Technical Information). Clear mechanical actuation and integrated electrical contacts ensure precise signal input for vehicle safety and convenience systems.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C4 II; Peugeot 508; DS4; DS5
• Product Codes: 96759249XT; 98000200ZD
• Other Numbers: COM2008; 6243C4

Installation Recommendations

Work Should Be Carried Out By A Qualified Technician Or An Experienced DIYer With Basic Tools. Follow These Steps:

• Disconnect The Negative Battery Terminal And Wait A Few Minutes To Minimize Airbag Deployment Risk.
• Remove Steering Column Covers And, If Required By Vehicle Design, The Steering Wheel Or Airbag Module Following Manufacturer Safety Procedures.
• Unplug The Multi-Pin Connector From The Old Stalk Assembly And Unscrew Any Retaining Clips Or Fasteners.
• Fit The New COM2008P Stalk, Ensure Connectors Are Correctly Seated And Locking Tabs Are Engaged.
• Reassemble Covers, Reconnect Battery, And Verify All Functions: Indicators, Headlights, Fog Lights, Wipers (Front And Rear), Horn And Trip Computer Controls.
• If Any Function Fails After Installation, Recheck Connector Integrity And Wiring For Corrosion Or Broken Pins.

Most Common Failure Reasons

• Wear Of Internal Contacts Due To High Mileage, Causing Intermittent Or Non-Functioning Signals.
• Moisture Ingress Or Corrosion In Electrical Connectors, Leading To Faulty Operation.
• Mechanical Breakage Of Plastic Levers Or Retaining Tabs From Repeated Use Or Forceful Operation.
• Faulty Solder Joints Or Internal Switch Mechanisms Causing Intermittent Electrical Contact.

Search Tip: This Part Is Often Listed Under References 96759249XT, 98000200ZD, COM2008 Or 6243C4 — Entering Any Of These Codes Speeds Up Finding The Correct Item In Catalogs.

High-quality steering column stalk assembly designed as a direct-fit replacement for many Citroën, Peugeot and DS models. The COM2008 stalks consolidate multiple vehicle controls into a single unit, restoring full functionality for lighting, signaling, wipers and dashboard functions. Ideal for professional technicians and DIY enthusiasts looking for an OE-compatible spare part by product code (98000242ZD, 98199434ZD, COM2008).

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot / DS)
• Model: Citroën C4 II, Peugeot 508, DS4, DS5
• Product Codes: 98000242ZD, 98199434ZD
• Other Numbers: COM2008

Compatibility And Application

Designed to replace the original multi-function stalks fitted on Citroën C4 II, Peugeot 508 and DS models (DS4, DS5). This unit controls exterior lighting (headlights, parking lights), fog lights, turn signals, horn, front and rear wipers, and provides inputs to the trip computer and onboard electronics. Customers commonly search using the product codes listed above—include these codes when locating the correct spare part.

Installation Recommendations

Before starting work, disconnect the negative battery terminal and wait at least 10 minutes to deactivate the airbag system. Remove the steering wheel trim and lower/upper column covers to access the stalk assembly. Unplug the electrical connector(s) and remove the retaining screws or clips holding the module. Fit the new stalk in reverse order, ensuring connectors are fully seated and clips engage. Refit column covers and verify all functions (lights, indicators, wipers, horn, trip computer) before returning the vehicle to service. If the steering wheel or airbag must be removed, follow the vehicle manufacturer’s safety procedures or have the job performed by a trained technician.

Why The Part Fails Most Often

Multi-function stalk assemblies are subject to frequent mechanical use and electrical switching. Common failure modes include worn contacts causing intermittent or non-functioning indicators and wipers, plastic fatigue or broken levers from repeated operation, and corrosion or moisture ingress affecting electrical connectors. Faulty stalks may also trigger electrical faults or warning lights if internal switches fail. Environmental exposure, heavy use of the wiper and indicator functions, and long service life increase the likelihood of failure.

Practical Notes For Mechanics And DIYers

• Verify the product code when searching or ordering; these units are often found by part number rather than description.
• Check related fuses and wiring if symptoms persist after replacement—intermittent faults can originate elsewhere in the circuit.
• Use care with connectors and retainers to avoid damaging fragile plastic clips on the steering column covers.
• After installation, perform a full function check: headlights (including dipped/main beam), fog lights, left/right indicators, horn, front/rear wipers and the trip computer inputs.

Replacing a faulty COM2008 stalk restores full control of essential vehicle functions and ensures safe, reliable operation of lighting and signaling systems. The part is a direct-fit option for the listed Citroën, Peugeot and DS models and is suited for both workshop installation and competent home mechanics.