Description

This multifunction stalk/control block (COM2005 by Delphi) is a direct-fit component used on a range of Citroën and Peugeot models. It centralizes the steering-column switches for lighting, fog lamps, wipers, horn, cruise control and some radio functions, improving ergonomics and consolidating wiring compared with individual switches. Suitable for professional garages and DIY mechanics familiar with steering column disassembly. Common search terms: COM2005, Delphi stalk module, multifunction switch, Citroën stalk controls, Peugeot stalk controls, part numbers 96601446XT, 6242X3.

Technical Information

• Manufacturer: Delphi
• Model: COM2005
• Product Codes: 96601446XT, 96640423XT, 96660124XT, 98069813XT
• Additional Numbers: 6242X3, 6242GF, 6242VW

Fitment / Compatible Models

Typical compatibility includes (but is not necessarily limited to): Citroën Berlingo II, Citroën Berlingo III, Citroën C2, Citroën C3 (I and II), DS3, Peugeot Partner II, Peugeot Partner III, and related vehicles using the COM2005 platform. Always verify the part number against the vehicle’s original part marking before installation.

Installation

• Disconnect the negative battery terminal before any work to avoid short circuits and airbag deployment.
• Remove steering wheel trim and, if required, the airbag module following the vehicle manufacturer’s safety procedures.
• Unscrew/remove steering column covers to access the COM2005 module and its connectors.
• Unplug electrical connectors and release any retaining clips. If the radio/steering controls are separate, transfer the required control stalk or switch to the new unit as noted in the original description.
• Fit the replacement unit, reconnect all plugs and reassemble covers and steering wheel trim. Reconnect the battery and verify all functions: lights, fog lights, wipers, horn, cruise control and radio controls.
• If any function is inactive or intermittent after installation, check connector seating, wiring continuity and fuses before considering replacement.

Why The Part Most Commonly Fails

• Mechanical Wear: Frequent use of stalks causes switches and plastic components to wear or break over time.
• Electrical Contact Degradation: Oxidation or pitting of contacts can lead to intermittent operation of lights, wipers or horn.
• Water Ingress And Corrosion: Moisture reaching connectors or the module accelerates failures.
• Connector Or Harness Damage: Faulty wiring or damaged plugs from previous repairs or accidents causes loss of function.
• Internal Electronic Faults: Component failure on the COM2005 board (e.g., failed relays or semiconductors) can disable multiple functions.

Recommendations For Installation

• Perform installation in a dry, well-lit workshop with appropriate tools. Avoid forcing plastic clips to prevent breakage.
• Always follow the vehicle manufacturer’s disassembly sequence for steering column and airbag components.
• Inspect mating connectors and wiring harness for corrosion or damage and repair as needed before fitting the unit.
• After installation, test all affected systems (lights, wipers, horn, cruise control, steering wheel/radio switches) on the road in a safe environment.
• If functions related to vehicle electronics remain inactive, diagnostic equipment capable of reading Citroën/Peugeot fault codes (e.g. DiagBox/Lexia) can help locate interaction issues in body modules or buses.

Original drivers under the steering wheel (levers) COM2002 VALEO for Citroën C2 and Citroën C3. The module integrates direction indicators and lighting, wiper control (including rear), fog lights and satellite controller of the car radio. Execution with rain sensor support. Ideal replacement for failure of the original module – easy solution of frequent defects, such as random sign shutdown, non -functional wiper positions or radio control outages.

This type COM2002 is designed specifically for a rain sensor; The electronics in the module communicate with BSI and, according to the equipment of the car, can also operate the on -board computer button. Always follow the OEM codes: 96488210XT, 6239.GV, 6239.tn. If the numbers match your original work, the match and connectors are usually ensured.

Why change this part: for C2/C3 cars, the COM2002 is one of the more often worn components – especially the mechanics of the rudder self -sample, micro -pipes in the levers and cable jumper (so -called clock spring). Replacement of the complete unit will restore the certainty of controlling lights, wipers and radio and prevent further unwanted behavior of electrical equipment.

Installation tips: Before any intervention, always disconnect the negative pole of the battery and wait at least 10 minutes for the airbag. This is followed by removal of the steering wheel airbag, steering wheel and plastic steering column covers. The COM2002 module is slid on the pillar and secured; It can be removed and replaced when connectors are disconnected. Pay attention to the correct centering of the airbag ring (flat cable) to avoid damaging it at full refund.

Technical information

• manufacturer: valeo/psa
• Model: Citroën C2; Citroën C3 I; Citroën C3 pluriel
• product codes: 96488210XT; 6239.GV; 6239.tn
• Additional numbers: Module designation COM2002; design with a rain sensor

Key advantages: The original VALEO version guarantees the proper functioning of all levers and drivers, full compatibility of connectors and communication with BSI. Thanks to accurate pairing according to OEM numbers 96488210XT / 6239GV / 6239TN you can quickly find the right part for the Citroën C2 and C3 (including the pluriel version) without the need for modifications.

These COM2002 Valeo steering column switches are designed to seamlessly operate multiple vehicle functions for the Citroën C3 Pluriel. They control headlights, Sensodrive system, fog lights, car radio, trip computer, front windshield wipers, and the horn, providing comprehensive control at your fingertips.

Designed for both professional mechanics and individual car enthusiasts, these reliable steering switches offer an affordable and effective replacement option to maintain your vehicle’s original performance and safety. Their robust design ensures smooth operation and longevity, which is crucial since steering column switches are subject to frequent use and occasional wear.

Replacement of the steering column switches typically involves removing the steering column cover to access and disconnect the faulty switch module, followed by installing the new unit and verifying all functions operate correctly. Regular inspection is recommended as faults often occur due to wear of internal contacts or exposure to dust and moisture.

Technical Information

• Manufacturer: Valeo
• Model: Citroën C3 Pluriel, COM2002
• Product Codes: 96488228XT, 6239VN
• Additional Numbers: NFP

This part is primarily intended for the Citroën C3 Pluriel but may be compatible with other Citroën and Peugeot models according to manufacturer specifications. For questions about compatibility or installation, please contact our support team.

We provide expert advice and support to ensure proper installation and safe functionality of this essential component. Trust our range of quality parts to keep your Citroën or Peugeot running smoothly and safely.

Designed for the PSA Citroën and Peugeot models, this switch is compatible with the Citroën C2 and C3. The ease of installation allows for a straightforward replacement process, typically requiring only basic tools. It’s advisable to replace the switch if you experience any issues with your vehicle’s lighting or wiper systems, as these problems can stem from a malfunctioning component.

Technical Information:

• Manufacturer: Valeo
• Model: Citroën C2, C3
• Product Codes: 96474011XT, 6239EH
• Additional Numbers: N/A

Thanks to their multifunctionality, the controls allow for convenient operation of fog lights, rear wipers, and radios directly from the driver’s position. An integrated rain sensor further enhances driving safety in adverse weather conditions by automatically activating the wipers.

Technical Information:
Manufacturer: VALEO
Model: CITROËN C2, C3, PEUGEOT 1007
Product Codes: 96474025XT, 96576781XT, 6239X0
Additional Numbers: COM2002

When replacing the old control with a new one, it’s important to verify the product’s compatibility with your vehicle and ensure that all connections are correctly attached. Replacement parts should be installed by a trained technician to avoid any issues related to improper installation.

With our used parts, you gain not only quality and reliability but also a cost-effective solution that is much friendlier than purchasing new components. All our products undergo thorough inspection, so you can expect performance comparable to original new parts.

Are you searching for high-quality and reliable control switches for Citroën and Peugeot models? We present to you the VALEO COM2002 control switches, which are compatible with Citroën C2, C3, C3 Pluriel, and Peugeot 1007. These switches are mounted under the steering wheel and allow easy operation of fog lights, rear wipers, car radio, and wiper sensors. Thanks to their high quality and precise workmanship, they are an ideal choice for replacement parts.

Control switches are designed to provide maximum functionality and long-lasting durability. Replacing these switches is often necessary due to wear or damage, and with our used parts, you can obtain a reliable replacement for a fraction of the cost of a new part. These components are known for their durability and long-term reliability, which is why they are highly sought after by both mechanics and users performing DIY repairs.

Technical Information:
Manufacturer: Valeo
Model: COM2002
Product Codes: 96488214XT, 6239VA
Additional Numbers: NFP
This model of control switches has been specifically designed for use in Citroën and Peugeot vehicles, ensuring seamless compatibility and performance.

Investing in quality replacement parts is key to keeping your vehicle in excellent technical condition. With our VALEO COM2002 control switches, you can be assured that you are getting a product that meets your expectations and also contributes to better functionality of your car. Remember, the right part not only enhances driving safety but also provides comfort and convenience while driving.

Delphi controls are easy to install and perfectly compatible with Citroën C2, C3, C3 Pluriel, Peugeot 207, and other models. Whether you are a professional mechanic or a DIY enthusiast, this product will provide you with the results you need.

Technical Information:

• Manufacturer: Delphi
• Model: Citroën C2, C3, C3 Pluriel, Peugeot 207
• Product Codes: 9656126977, 96561269XT, 6242XJ
• Additional Numbers: 9656126977C

This product is among the highly sought-after parts due to its precision and reliability in the shifting function. It is often searched for in the used auto parts market using the provided codes, ensuring easy identification and quick replacement. Replacement parts like this gear shift control extend the life of your vehicle and improve its overall functionality.

If you need a reliable part for repairing or upgrading your vehicle, this Delphi Gear Shift Control is the right choice. Not only does it ensure smooth and precise shifting, but it also provides your vehicle with the necessary robustness and reliability. Choose the quality and expertise that the Delphi brand brings, and ensure that your vehicle operates at its highest level.

Are you looking for a reliable and high-quality steering control for your Citroën C2 or C3? Order this used but fully functional control that is perfect for replacing original non-functional or worn-out parts in your vehicle.

This steering control is designed for precise operation of your vehicle’s functions, including fog lights, rear wipers, car radio, and cruise control. The integrated rain sensor guarantees that your driving will always be comfortable and safe, regardless of the weather conditions. The radio and cruise control control must be transferred from your existing vehicle, allowing for simple installation without the need for further modifications.

Technical Information:
Manufacturer: Valeo
Model: Citroën C2, Citroën C3
Product Codes: 96488227XT, 6239VL
Additional Numbers: 6239VL NFP

This steering control has been thoroughly tested to guarantee its full functionality. It comes from trusted sources, ensuring you receive a product that meets your expectations and high standards. It is specifically designed for Citroën C2 and Citroën C3 models, making it an excellent choice for owners of these vehicles.

Thanks to its robustness and wear resistance, it promises long-term reliability and functionality. Additionally, transferring the radio and cruise control from your existing vehicle means you won’t need to invest in new expensive parts.

Whether you are a professional mechanic or someone who repairs their own car, this steering control is a great choice to ensure that your Citroën continues to operate smoothly and efficiently. Order now and get the replacement part you can rely on during the most demanding drives!

Key Features

The COM2005 Delphi multifunction switch block manages multiple body functions from behind the steering wheel. It centralises control of lighting circuits, fog lamps, radio command, cruise control inputs, windshield wipers (front and rear) and the horn. Designed for easy integration in PSA group vehicles, it improves harness simplicity by grouping several switch functions into one module.

Technical Information

• Manufacturer: Delphi
• Model: COM2005
• Product Codes: 96660124XT, 96640423XT, 98069813XT
• Other Numbers: 6242VW, 6242GF, 6242X3, 98069813, COM2005

Compatibility

Commonly fitted to various Citroën and Peugeot models from the PSA/Stellantis range. Typical applications include:

• Citroën C2
• Citroën C3 (I and II)
• Citroën DS3
• Citroën Berlingo B9
• Peugeot Partner Tepee / Partner II

Installation And Replacement

Replacement of the COM2005 switch block is a medium-difficulty job suitable for experienced DIYers and professional mechanics. Typical steps:

1. Disconnect the negative terminal of the battery before any work.
2. Remove the steering column covers to access the multifunction switch block.
3. If required, transfer the radio/cruise stalk or associated control switches from the old unit to the replacement unit.
4. Unplug all connectors carefully, noting locking tabs and harness routing to avoid damage.
5. Fit the new unit, reconnect connectors and secure mounting screws to the correct torque.
6. Perform necessary coding or commissioning (see Coding section below).

Installation and Coding – Important

• The unit is used and is “paired” with the original vehicle (VIN/PIN/keys).
• Options for commissioning:

1. Cloning data from the old unit (EEPROM/Flash) – after cloning the unit is plug and play.
2. Virginization and subsequent initialization/telecoding via DiagBox (or online) + key adaptation.

• Recommended to be carried out by a technician with PSA service equipment (DiagBox/Lexia/PP2000).
• Before removal/installation always disconnect the battery and follow the manufacturer’s procedure to avoid damaging the unit.

Common Failure Causes

Failures typically result from electrical faults or environmental damage rather than mechanical wear of the plastic housing. The most common causes are:

• Corroded or damaged connector pins from moisture ingress.
• Water penetration due to door seals or windscreen leaks affecting the switch block.
• Short circuits or voltage spikes in the vehicle electrical system.
• Faulty internal solder joints or degraded components after long service life.
• Wear of mechanical contacts in stalk switches leading to intermittent operation.

How Often It Fails

There is no fixed service interval. Lifespan depends on vehicle usage, environment and exposure to moisture or electrical problems. In practice, failures are more likely on high-mileage vehicles or those exposed to leaks, humid garages or improper jump-starting procedures.

Recommendations For Mounting

• Always disconnect the battery before starting work and wait several minutes for systems to power down.
• Inspect and, if necessary, clean the wiring harness connectors before reinstallation. Replace any corroded connectors.
• If moving the stalk/switch from the original unit, ensure correct orientation and secure mounting to avoid play.
• After installation, verify all functions (lights, wipers, horn, cruise control, radio controls) and perform any required coding or cloning with appropriate diagnostic tools.

Who Should Use This Part

Suitable for professional automechanics and experienced DIY enthusiasts performing repairs on Citroën and Peugeot vehicles. Often searched by part number during parts lookup—keeping the OEM codes handy speeds identification and procurement.

Additionally, the controls allow for functionality with the car radio and cruise control, although an additional controller is required for full compatibility with the cruise feature.

These controls are built to replace worn or malfunctioning units, as they can deteriorate over time due to regular usage, exposure to temperature fluctuations, and electrical issues. Replacing these controls can restore full functionality, ensuring a safer and more convenient driving experience.

Technical Information

• Manufacturer: Citroën/Peugeot
• Model: Peugeot 206+
• Product Codes: 96777183XT, 96787398XT, 6242XS
• Additional Numbers: None