This replacement wiper stalk (stalk switch) operates both front and rear windshield wipers and is suitable for a range of Citroën and Peugeot models. Designed for professional garages and DIY mechanics who often search by part number, this unit appears under the OEM references 96205589ZL and 6239A7. The switch provides reliable manual control of intermittent, low and high wiper speeds as well as rear wiper and washer activation where applicable.

Compatible Models

• Peugeot 206
• Peugeot 406
• Citroën Berlingo I
• Peugeot Partner II
• Citroën Xsara
• Citroën Xsara Picasso

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Peugeot 206, Peugeot 406, Citroën Berlingo I, Peugeot Partner II, Citroën Xsara, Citroën Xsara Picasso
• Product Codes: 96205589ZL, 6239A7
• Other Numbers: 6239A7 | 96205589ZL

Function

The wiper stalk is the driver control interface for windshield wipers and washers. It selects intermittent, low and high speeds for the front wipers, engages the rear wiper and washer where fitted, and often integrates the intermittent timing and wash pulse functions. It transmits user inputs to the vehicle’s wiper motor and related relays/electronics.

Replacement Procedure

Basic replacement steps for experienced technicians or confident DIYers:

• Disconnect the negative battery terminal to prevent short circuits or airbag deployment.
• Remove steering column trim panels to access the stalk mounting and electrical connector.
• Unplug the electrical connector and release any retaining clips or screws securing the stalk.
• Remove the old stalk, fit the replacement unit, and secure with the original fasteners.
• Reconnect the electrical connector, reassemble the column covers and reconnect the battery.
• Verify all wiper and washer functions (front/rear, intermittent, speeds) before returning the vehicle to service.

Installation Recommendations

• Work with the battery disconnected and follow vehicle-specific airbag safety procedures.
• Check connector pins for corrosion or damage; clean contacts if necessary before installation.
• Avoid forcing plastic clips; use correct trim tools to prevent damage to column covers.
• Test functionality fully before closing the steering column covers to ensure correct operation.

Why The Part Most Commonly Fails

Wiper stalks wear out primarily from frequent mechanical use and electrical contact wear. Common failure causes include worn internal contacts causing intermittent or non-functional switch positions, moisture ingress and corrosion of connector pins, plastic fatigue or breakage of the stalk or mounting points, and electrical arcing that degrades contact surfaces. Vehicles with high mileage, heavy wiper use or exposure to damp conditions are more prone to failure.

Searchable by OEM codes 96205589ZL and 6239A7 — verify the reference number against the part required for your specific model before ordering.

This transponder antenna is a direct-fit component designed for Peugeot and Citroën models that use a conventional (non-multiplex) immobilizer system. Ideal for professional workshops and competent DIYers, the unit reads the key transponder signal around the ignition switch and relays it to the immobilizer control module. Replacement of a faulty antenna restores reliable key recognition and eliminates no-start conditions caused by missing transponder communication.

Compact and discreet, the antenna assembly typically mounts around the ignition barrel or column. It is commonly sought by part number (9632487880 / 616069), making it easy to find in catalogs or when ordering spare parts. Technically simple but crucial for vehicle security, this antenna ensures the transponder coil can communicate with the vehicle ECU to permit engine start.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: 206, 307 I, 406, Berlingo I, Berlingo II, Expert II, Jumpy II, Partner I, Partner II, Xsara, Xsara Picasso
• Product Codes: 9632487880, 616069
• Other Numbers: NFP

Installation Recommendations

Before starting work, disconnect the battery and wait a few minutes to avoid accidental short circuits. Typical replacement steps:

• Remove the lower steering column trim and any covers around the ignition switch.
• Unplug the antenna connector and detach any retaining clips.
• Replace the antenna with the new unit, ensuring the coil sits concentrically around the ignition barrel.
• Reconnect the connector, reassemble trims and reconnect the battery.

Always follow the vehicle manufacturer’s removal and installation procedure to avoid damage to the ignition barrel, wiring harness, or surrounding components.

Why The Part Most Commonly Fails

Failures are usually caused by mechanical damage to the antenna or connector (from collisions or rough handling during steering column work), corrosion or moisture ingress, broken or fatigued wiring, or degraded solder joints in the coil. Symptoms include intermittent or complete loss of key recognition, immobilizer warning lights, and engine cranking without start.

Practical Notes For Mechanics And DIYers

When replacing the antenna, inspect the connector pins and wiring for corrosion or damage and test continuity where possible. If the immobilizer fault persists after antenna replacement, check the immobilizer control module and key transponder battery/state. Because this part is specific to non-multiplex systems, confirm that the vehicle does not use a multiplexed CAN/BSI configuration before ordering.

Usually encountered in models such as Berlingo I, Partner I, Xsara, and Xsara Picasso, the Rotary Contact may require replacement over time due to wear and tear, as consistent turning and movement can lead to degradation of the electrical connections. Symptoms indicating a failing Rotary Contact include intermittent horn operation, airbag warning lights, or malfunctioning radio controls.

Replacing the Rotary Contact is relatively straightforward, often involving the removal of the steering wheel and related components, making it a manageable task for both professional mechanics and DIY enthusiasts.

Technical Information

• Manufacturer: PSA
• Model: Citroën, Peugeot
• Product Codes: 9627442580, 4112X7
• Additional Numbers: NFP

Part number 9632162780 4112AG is compatible with models including the Peugeot 206, 307 I, 406, Berlingo I, Berlingo II, Expert II, Jumpy II, Partner I, Partner II, Xsara, and Xsara Picasso.

Replacement of the rotary contact is typically needed when the airbag warning light remains illuminated or when there are issues with airbag deployment, which can occur due to wear and tear over time. Regular inspection and timely replacement of this component can prevent safety risks associated with malfunctioning airbags.

Technical Information

• Manufacturer: PSA
• Model: Citroën Peugeot
• Product Codes: 9632162780
• Additional Numbers: 4112AG

Compatible with models such as the Peugeot 206, 406, Berlingo I, Partner I, Xsara, and Xsara Picasso, this part is an excellent choice for both professional mechanics and DIY enthusiasts looking to perform repairs on vehicles without a multiplex network.

Installation of the Wiper Control Switch is straightforward. Simply remove the steering column cover, disconnect the old switch, and install the new one, ensuring a snug fit. Regular checks are advisable, as wiper controls may wear out over time due to constant use, leading to malfunction or failure.

This switch is designed to meet or exceed manufacturer specifications, providing reliability and longevity. It is often searched by its product numbers 96247562ZL and 6239H6, ensuring that customers find the correct part for their vehicle.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: 96247562ZL 6239H6
• Product Codes: 96247562ZL, 6239H6
• Additional Numbers: 6239H6

This steering column switch bracket is a direct-fit replacement designed for Peugeot and Citroën vehicles that do not use a multiplex network. Supplied under OEM-related codes 9631626080, 61557024 and 6239K0, the bracket secures the stalks and switch modules under the steering wheel, restoring correct alignment and mechanical support. Ideal for professional workshops and DIY mechanics, this part helps eliminate play in the controls, prevents chafing of wiring and ensures reliable operation of indicators, wipers and cruise controls where applicable.

Technical Information

• Manufacturer: Stellantis (Peugeot / Citroën)
• Model: Peugeot 206, Peugeot 406, Peugeot 607, Berlingo I, Partner I, Xsara, Xsara Picasso
• Product Codes: 9631626080, 61557024, 6239K0
• Other Numbers: 61557024, 6239K0, 9631626080

Installation Recommendations

• Always Disconnect Battery Before Starting Work To Prevent Airbag Deployment And Short Circuits.
• Remove Steering Column Trim Panels Carefully To Access The Bracket; Keep Fasteners Organized For Reassembly.
• If Required, Remove The Steering Wheel Using Appropriate Tools And Follow Manufacturer Airbag Safety Procedures.
• Unplug Electrical Connectors And Note Their Positions; Replace The Bracket And Refit Fasteners To Specified Torque Where Available.
• Check Switch Functionality (Indicators, Wipers, Lights, Cruise) After Reassembly And Ensure Cables Are Not Pinched.

Why The Part Fails Most Often

• Plastic Fatigue And Breakage Of Mounting Tabs After Years Of Use Or Repeated Steering Column Disassembly.
• Mechanical Damage From Impact Or Accidents Causing Cracked Or Deformed Bracket.
• Wear From Excessive Play In The Column Leading To Stress On The Bracket And Attached Controls.
• Corrosion Or Embedded Debris Preventing Secure Fitment; Electrical Problems Are Usually Secondary To Mechanical Failure.

Notes For Purchase

Match The Product Codes (9631626080 / 61557024 / 6239K0) And Connector Layout To Your Vehicle When Selecting This Part. This Bracket Is Intended For Non-Multiplexed Electrical Systems Common On Earlier Peugeot And Citroën Models.

Why Choose This Part

Provides A Cost-Effective, Direct Replacement For Worn Or Broken Steering Column Switch Brackets. Designed For Easy Fitment By Experienced Technicians And Competent DIY Mechanics, It Restores Proper Switch Positioning And Reduces The Risk Of Wire Chafing Or Intermittent Control Operation.

Product Overview

High-quality transponder antenna designed for PSA/ Stellantis vehicles. This immobilizer antenna reads the key transponder signal and transmits it to the vehicle’s immobilizer system. It is a direct-fit replacement for a range of PEUGEOT and CITROËN models with multiplexed wiring and is intended for professional installers and DIY mechanics who need reliable anti-theft recognition between key and ECU.

Technical Information

• Manufacturer: Stellantis (PEUGEOT / CITROËN)
• Model(s): Peugeot 1007, Peugeot 307, Peugeot 807, Citroën C3, Citroën C8 (see fitment list below)
• Product Codes: 9648445180, 9632897680, 9652781780, 6160C0
• Other Numbers: 616073, 616087, 6160C2, 9652781760

Fitment / Compatible Models

Common compatible models include:

• Peugeot 1007
• Peugeot 307
• Peugeot 807
• Citroën C3
• Citroën C8
• Also fitted on related PSA models that use the same immobilizer architecture (check part number match before ordering)

How To Replace

Replacement is straightforward for an experienced mechanic. Typical steps:

• Disconnect the vehicle battery before starting work to avoid electrical damage.
• Remove steering column trim to access the ignition barrel and immobilizer antenna ring.
• Unplug the antenna connector and remove any retaining clips or screws.
• Fit the new antenna in the same orientation as the original; ensure the coil ring sits correctly around the ignition barrel.
• Reconnect the wiring, reassemble trims and reconnect the battery. Verify key recognition and engine start function.

Installation Recommendations

• Always disconnect the battery before disassembly to prevent damage to electronic modules.
• Handle the antenna coil carefully to avoid deforming or cracking the ring; even small damages can impair signal strength.
• Check connector pins and wiring for corrosion or damage and clean contacts if necessary.
• After fitting, test with all vehicle keys to confirm reliable transponder recognition and start sequence.

Why This Part Fails Most Often

• Mechanical damage to the antenna coil or housing (impact, cracked trim, deformation).
• Corroded or broken wiring and connector contacts causing intermittent or no signal transmission.
• Water ingress or long-term exposure to moisture leading to coil shorting or connector failure.
• Wear from repeated removal/reinstallation or improper handling during previous repairs.
• Symptoms of failure: Key not recognized, engine immobilized, intermittent starting problems or fault codes related to the immobilizer system.

Technical Details

• Operating Type: Low-frequency (LF) transponder antenna (typically 125 kHz for PSA immobilizer systems).
• Function: Reads passive key transponder and transmits signal to immobilizer/BCM for authentication.
• Connector: OEM-style PSA connector (exact plug variant depends on model and production year).

Notes

Search by product code for quick matching in parts catalogs. Ensure the part number matches the original antenna before ordering to guarantee fitment and correct operation.

Designed for compatibility with various models, including Berlingo I, Partner I, Xsara, and Xsara Picasso, this switch is a must-have for any car mechanic or DIY enthusiast working on these vehicles. Over time, rotary switches can wear out due to frequent use, resulting in malfunctioning controls. It is generally recommended to replace the switch if you notice any irregularities in the operation of the airbag, horn, or radio.

Technical Information

• Manufacturer: Citroën Peugeot
• Model: Berlingo I, Partner I, Xsara, Xsara Picasso
• Product Codes: 9641413580
• Additional Numbers: 4112EN, 4112EP

Compatibility: This radio control unit is compatible with a variety of Citroën and Peugeot models, including the Berlingo I, Partner I, Xsara, and Xsara Picasso. Its user-friendly design makes it an ideal choice for both professional mechanics and car enthusiasts who prefer to undertake their own repairs.

The function of this product is to allow drivers easy access to their audio controls without taking their hands off the wheel. Over time, steering wheel control units may wear out due to regular usage, electrical faults, or exposure to the elements. Replacing a failing unit is crucial to maintain your driving safety and enjoyment.

Technical Information

• Manufacturer: PSA CITROEN PEUGEOT
• Model: 4112CT
• Product Codes: NFP
• Other Numbers:

Replacing the wiper switch is straightforward and can often be done without professional assistance. The switch typically needs to be replaced if the wipers do not respond, or if they operate erratically, which is common due to wear and tear over time.

Functionally, this switch controls the wiper speed and intermittent settings, providing flexibility for various weather conditions. Regularly checking and replacing the wiper switch can enhance visibility and safety during driving.

Technical Information

• Manufacturer: PSA
• Model: Citroën Peugeot
• Product Codes: 96172873ZL, 623961
• Additional Numbers: NFP