High-quality replacement steering column stalks designed for Stellantis vehicles — ideal for professional workshops and skilled DIY mechanics. This COM2008P unit is commonly searched by part numbers 96759252XT and 6243C6, so listing those codes in your search will help you find the exact item quickly. The module restores full control of exterior lights, fog lamps, all wiper functions, turn signals, horn and on-board computer functions, ensuring safe and legal operation of the vehicle lighting and signaling systems.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C4 II, Peugeot 508, DS4, DS5
• Product Codes: 96759252XT
• Other Numbers: 6243C6, COM2008P

How To Replace

• Disconnect the negative battery terminal before any work to avoid electrical damage and airbag deployment.
• Remove upper and lower steering column covers to access the stalk assembly. On some models removal of the steering wheel and airbag module is required — follow manufacturer safety procedures when working with airbags.
• Unplug electrical connectors and release retaining clips holding the stalks in place.
• Fit the new stalk assembly, reconnect connectors and test all functions (lights, indicators, wipers, horn, trip computer) before reassembling covers.
• Reinstall components and reconnect the battery. Verify correct operation and check for any fault codes with a diagnostic tool if available.

Installation Recommendation

Work should be performed by a qualified technician or an experienced DIYer comfortable with steering column disassembly and airbag safety. Always follow the vehicle manufacturer’s repair manual, torque settings and safety instructions. After installation, confirm full functionality of indicators, wipers and horn. If the vehicle uses advanced multiplexing, a diagnostic scan may be necessary to clear historic faults — the physical replacement itself is usually straightforward but testing with a scan tool increases reliability.

Common Failure Reasons

• Wear of internal electrical contacts and carbon tracks from repeated use, causing intermittent or lost functions.
• Mechanical damage to stalk levers or retaining clips from impact or excessive force.
• Corrosion or moisture ingress affecting connectors and switch internals, especially after water leaks or aggressive cleaning.
• Electrical shorts or wiring faults in the column harness producing sporadic behavior or blown fuses.
• Accumulation of dirt and grime causing sticky or unreliable switches.

There is no fixed replacement interval — longevity depends on usage, environment and vehicle age. Symptoms that indicate replacement are intermittent lighting, non-functioning indicators or wipers, unresponsive horn, or error messages on the instrument cluster related to stalk functions.

This steering wheel control module is a direct-fit switch cluster designed for Citroën/Peugeot Group vehicles. It restores complete steering wheel button functionality — audio, phone and menu control inputs — and is ideal for professional workshops and DIY mechanics who search by part number. The module is a practical replacement for faded, damaged or intermittently working controls and keeps original steering wheel ergonomics and electrical interfaces.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model(s): Citroën C4 II, DS4, DS5, Peugeot 508, Partner II (as listed)
• Product Codes: 96720447ZD, 98094695ZD
• Additional Numbers: 96759249XT, 98000200ZD, 6243C4

Installation Recommendations

1. Disconnect the negative battery terminal and wait at least 10 minutes to disable the airbag system before starting work.
2. Remove the airbag module from the steering wheel following the vehicle manufacturer’s procedure.
3. Unscrew the retaining fasteners and carefully detach the steering wheel trim to access the switch module.
4. Disconnect electrical connectors and remove the old switch module. Take care with fragile plastic clips and ribbon cables.
5. Fit the replacement module, reconnect all plugs, and reassemble in reverse order. Ensure airbag and steering wheel fasteners are torqued to manufacturer specifications.
6. Reconnect the battery and verify full functionality of all steering wheel controls, voice/phone buttons and menu navigation.

Why This Part Fails Most Often

Steering wheel switch modules typically fail due to wear and mechanical damage rather than simple electrical aging. Common causes include worn contact pads from heavy use, broken or detached plastic/chrome trim (as in this unit), moisture ingress causing corrosion, short circuits after liquid spills, and physical damage from impacts or airbag deployment. Intermittent function can also be caused by connector issues or a faulty clock spring in the steering column, so inspect surrounding components when diagnosing.

Benefits of replacing this unit: restores factory control functionality, maintains resale value, and avoids more expensive electrical work if the problem is localized to the switch module. Because many buyers search by product number, the included codes help you confirm fitment quickly.

High-quality steering column stalk assembly COM2008 designed for Citroën and Peugeot models. This unit consolidates multiple controls into one compact module, restoring full functionality for lighting, wipers, indicators, horn and on-board computer commands. Ideal for professional garages and DIY mechanics who need a direct replacement part often searched by product codes (96759249XT, 98000200ZD, 6243C4, COM2008). Installing a correct stalk assembly returns intuitive multifunction control and eliminates intermittent faults such as stuck wipers, non-working indicators or inoperative horn.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C4 II, Peugeot 508, DS4, DS5
• Product Codes: 96759249XT, 98000200ZD
• Other Numbers: 6243C4, COM2008

Function And Benefits

• All-In-One Control: Combines headlight, fog light, wiper, indicator, horn and trip computer controls in a single stalk assembly.
• Direct Fit: Designed to match original mounting points and electrical connectors for the listed models, simplifying replacement.
• Restore Safety And Comfort: Replaces faulty or unreliable stalks that compromise signaling, visibility and driver information access.

Replacement Procedure

Basic replacement steps for competent mechanics:

• Disconnect The Battery: Always isolate the vehicle battery before beginning work to avoid short circuits and SRS/airbag system triggers.
• Remove Steering Column Covers: Unscrew and carefully separate upper and lower shrouds to access the stalk assembly.
• Disconnect Electrical Connectors: Unclip the module connectors gently to avoid damaging terminals.
• Remove Retaining Fasteners: Unscrew the mounting screws or clips holding the stalk assembly in place and extract the old unit.
• Fit New Unit: Position the replacement stalk, secure with original fasteners and reconnect all plugs.
• Function Test: Reconnect the battery and verify all functions (indicators, lights, wipers, horn, trip computer) before reassembling the covers.

Installation Recommendations

• Always Disconnect The Battery Before Work: Prevents electrical damage and accidental airbag deployment.
• Follow Manufacturer Torque And Assembly Procedures: Use correct fasteners and ensure connectors are fully engaged.
• Inspect Wiring And Connectors: Replace or clean corroded terminals to avoid recurring faults.
• Test All Functions Before Final Reassembly: Confirm operation of lights, wipers, horn and trip computer to avoid repeat disassembly.
• Use Proper Tools: Avoid excessive force on plastic clips and steering column components.

Most Common Failure Causes

• Mechanical Wear: Repeated use causes wear on internal contacts and switches, leading to intermittent or complete failure.
• Electrical Contact Corrosion: Moisture ingress or oxidized terminals create poor connections affecting multiple functions.
• Broken Stalk Or Internal Plastics: Physical damage from impact or misuse can break levers or internal guides.
• Short Circuits Or Wiring Damage: Chafed cables or previous repair faults can cause malfunctions or blown fuses.
• Accumulated Dirt And Debris: Impairs contact surfaces and switch movement, particularly on wiper and indicator mechanisms.

Notes For Professionals

This part is commonly identified by product codes 96759249XT and 98000200ZD (also referenced as 6243C4 / COM2008). Ensure physical match of connector shapes and mounting points when selecting replacements. For safety-critical tasks or when airbag components must be handled, follow manufacturer service instructions or have the fitment done by a qualified technician.

Warranty And Quality

Replacement of a defective steering column stalk restores original vehicle controls and improves safety. Verify part number fitment and inspect the unit on delivery for visible damage before installation.

High-quality steering column stalk assembly designed as a direct-fit replacement for many Citroën, Peugeot and DS models. The COM2008 stalks consolidate multiple vehicle controls into a single unit, restoring full functionality for lighting, signaling, wipers and dashboard functions. Ideal for professional technicians and DIY enthusiasts looking for an OE-compatible spare part by product code (98000242ZD, 98199434ZD, COM2008).

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot / DS)
• Model: Citroën C4 II, Peugeot 508, DS4, DS5
• Product Codes: 98000242ZD, 98199434ZD
• Other Numbers: COM2008

Compatibility And Application

Designed to replace the original multi-function stalks fitted on Citroën C4 II, Peugeot 508 and DS models (DS4, DS5). This unit controls exterior lighting (headlights, parking lights), fog lights, turn signals, horn, front and rear wipers, and provides inputs to the trip computer and onboard electronics. Customers commonly search using the product codes listed above—include these codes when locating the correct spare part.

Installation Recommendations

Before starting work, disconnect the negative battery terminal and wait at least 10 minutes to deactivate the airbag system. Remove the steering wheel trim and lower/upper column covers to access the stalk assembly. Unplug the electrical connector(s) and remove the retaining screws or clips holding the module. Fit the new stalk in reverse order, ensuring connectors are fully seated and clips engage. Refit column covers and verify all functions (lights, indicators, wipers, horn, trip computer) before returning the vehicle to service. If the steering wheel or airbag must be removed, follow the vehicle manufacturer’s safety procedures or have the job performed by a trained technician.

Why The Part Fails Most Often

Multi-function stalk assemblies are subject to frequent mechanical use and electrical switching. Common failure modes include worn contacts causing intermittent or non-functioning indicators and wipers, plastic fatigue or broken levers from repeated operation, and corrosion or moisture ingress affecting electrical connectors. Faulty stalks may also trigger electrical faults or warning lights if internal switches fail. Environmental exposure, heavy use of the wiper and indicator functions, and long service life increase the likelihood of failure.

Practical Notes For Mechanics And DIYers

• Verify the product code when searching or ordering; these units are often found by part number rather than description.
• Check related fuses and wiring if symptoms persist after replacement—intermittent faults can originate elsewhere in the circuit.
• Use care with connectors and retainers to avoid damaging fragile plastic clips on the steering column covers.
• After installation, perform a full function check: headlights (including dipped/main beam), fog lights, left/right indicators, horn, front/rear wipers and the trip computer inputs.

Replacing a faulty COM2008 stalk restores full control of essential vehicle functions and ensures safe, reliable operation of lighting and signaling systems. The part is a direct-fit option for the listed Citroën, Peugeot and DS models and is suited for both workshop installation and competent home mechanics.