Delphi COM2000 steering column stalk assembly designed for Citroën and Peugeot models. This unit controls exterior lighting functions such as fog lights, the front and rear wipers, as well as infotainment controls, trip computer inputs and ESP-related signals. The part is frequently referenced and searched by its product codes, making it easy to find when ordering or replacing in a workshop environment.

Designed for professional garages and experienced DIYers, the stalks offer direct replacement of the original COM2000 switches. The radio and cruise control stalks are not included and can be purchased separately if required. The assembly is suitable for vehicles from the Stellantis group running the COM2000 steering column system.

Key Features

• Direct Fit For Citroën And Peugeot Vehicles Equipped With Delphi COM2000
• Controls Fog Lights, Front And Rear Wipers, Radio Inputs, Trip Computer, And ESP Signals
• Multiple Product Numbers For Easy Identification And Ordering
• Ideal For Workshop Replacements And DIY Repairs

Technical Information

• Manufacturer: Delphi
• Model: COM2000 Steering Column Stalks
• Product Codes: 96605652XT, 6242C4, 624218, 6242J0
• Additional Numbers: 623939, 6239AK, 6239M2, 6239PW, 6239W2
• Compatible Models (Typical): Peugeot 307 II, Peugeot 308 I, Citroën Xsara, Citroën Xsara Picasso

Installation Recommendations

• Disconnect The Battery Before Starting Work And Follow Manufacturer Procedures To Avoid Airbag Or Electrical Damage.
• Remove Steering Column Trim Panels To Access The Stalk Unit; Keep Fasteners And Clips Organized For Reassembly.
• Unplug Electrical Connector(s) Carefully; Avoid Pulling On Wiring Looms Directly.
• Remove Mounting Screws Or Clips Securing The Stalk Assembly, Replace With New Unit, And Reconnect All Plugs.
• After Reassembly, Verify All Functions (Wipers, Lights, Radio Controls, Trip Computer, ESP Signals) Work Correctly.
• If Any Inconsistent Behavior Occurs, Recheck Connectors, Grounds And Fuses Before Proceeding To Further Diagnostics.

Most Common Failure Reasons

• Wear Of Internal Switch Contacts Caused By Frequent Use Leading To Intermittent Or Nonfunctional Controls.
• Moisture Ingress And Corrosion Affecting Electrical Contacts, Especially In Older Vehicles Or When Seals Fail.
• Mechanical Damage From Impact Or Rough Handling During Previous Repairs.
• Contamination By Dirt Or Grease Causing Poor Electrical Contact Or Stiff Mechanical Movement.
• Electrical Surges Or Short Circuits That Can Burn Internal Tracks Or Contacts.

Fitment Notes

This COM2000 stalk assembly is typically fitted to the listed Citroën and Peugeot models but is often located and ordered by the product code. Confirm that the vehicle uses the Delphi COM2000 steering column configuration and match the part number when replacing. Radio And Cruise Control Stalks Are Sold Separately.

Replacement Of This Unit Is A Practical Repair For Garages And Skilled DIYers To Restore Full Functionality Of Lighting, Wipers, And Control Inputs. Order Using The Product Codes For Fast Identification And Quicker Workshop Turnaround.

High-quality multifunction steering column stalk (DELPHI COM2003) designed for PSA group vehicles. This compact control unit brings together numerous driver functions — lighting and fog lamps, wiper and washer control for front and rear, trip computer operation, ESP inputs, cruise control engagement and radio controls (radio control may need to be added or transferred from the original stalk). Ideal for professional workshops and experienced DIY mechanics who service Citroën and Peugeot models. Use key search terms like DELPHI COM2003, 96605590XT and 624297 to find this part quickly.

Fitment And Replacement

Typical fitment includes Peugeot 307 (from 2005) and other PSA models where the COM2003 stalk is used — examples from workshop records: Peugeot 206, Peugeot 307 II, Peugeot 406, Peugeot 807, Berlingo II, Citroën C5 I and Citroën C8. Always confirm physical match of connector and function block before installation. Replacement is straightforward for a trained technician: set the steering wheel to straight ahead, disconnect the battery, remove the airbag and steering wheel (follow manufacturer torque and safety instructions), disconnect the stalk wiring connectors and remove the retaining screws or clips, fit the new stalk, reconnect wiring and reassemble. After fitment, check and test all functions (wipers, lights, trip computer, ESP indications, cruise control and radio controls).

Recommended Installation

• Disconnect the battery before any work on the steering column and wait the recommended time to allow capacitors to discharge.
• Follow manufacturer procedures for airbag removal and steering wheel torque values; use the correct tools to avoid damaging trim or connectors.
• Handle electrical connectors carefully — bent pins or damaged plugs are a common fault after poor installation.
• After installation, verify all functions on the vehicle and, if necessary, clear fault codes with suitable diagnostic equipment. Recalibration of related systems may be required in specific cases.

Most Common Failure Reasons

Multifunction stalks typically fail due to internal contact wear from repeated use (wipers, indicators, cruise control switches), ingress of moisture or dirt causing corrosion of contacts, mechanical breakage of the plastic stalk or internal levers, and electrical faults from connector corrosion or short circuits. Symptoms include intermittent or non-functioning wipers, fog light or indicator failure, loss of radio controls on the stalk, or cruise control not engaging.

Technical Information

• Manufacturer: Delphi (used on PSA / Peugeot Citroën vehicles)
• Model: COM2003
• Product Codes: 96605590XT, 624297
• Other Numbers: COM2003

Why Choose This Part

This multifunction stalk consolidates multiple controls into one serviceable unit, reducing dashboard clutter and simplifying repairs. It’s a practical replacement for workshops and competent DIYers looking to restore full functionality of steering column controls. Using the correct part number (96605590XT / 624297) increases the chance of direct fit and avoids adaptors or rewiring.

Notes For Professionals

When sourcing replacement stalks, check connector type and pinout against the vehicle’s existing part. In cases where radio controls or additional functions are not present on the replacement, the original switch assembly may need to be transferred. Always perform a full functional check and clear any related fault codes after installation.

This used steering column control unit is a direct replacement option for mechanics and DIY enthusiasts working on Peugeot and Citroën vehicles. It is commonly searched by part numbers 96635796XT, 98069979XT and 6242AA, so listing these codes increases findability in online searches. The module centralizes several functions around the steering column: lighting and fog lights control, wiper and rain-sensor signals, trip computer commands, ESP interfacing and cruise control activation. In some vehicle configurations radio or cruise-control commands require transferring the original stalk or adding the corresponding module.

Compatibility And Application

Fits a range of PSA/Stellantis models — commonly used on Peugeot and Citroën cars. Notable applications include:

• Peugeot 307 / 307 CC (including models from 2005 onwards)
• Peugeot 206
• Peugeot 406
• Peugeot 807
• Peugeot Berlingo II
• Citroën C5 I
• Citroën C8

Technical Information

• Manufacturer: Delphi (used on PSA/Stellantis vehicles)
• Model: COM2003
• Product Codes: 96635796XT, 98069979XT, 6242AA
• Other Numbers: COM2003

Function And Symptoms Of Failure

The stalk assembly provides user inputs for lights, fog lights, wipers, rain sensor signals, trip computer navigation, ESP-related commands, cruise control and some radio controls. Common symptoms indicating a faulty stalk include intermittent or non-functioning indicators for fog lights or wipers, lost trip computer control, unresponsive cruise control switches, or unexpected behaviour of related circuits (flickering lights, stuck wiper positions). Electrical contact degradation can also cause fault codes related to steering column switches.

Why The Part Fails Most Often

• Wear Of Internal Contacts: Repeated use causes contact wear or carbonization, leading to intermittent signals.
• Moisture Ingress And Corrosion: Water or condensation in the column can corrode connectors and switch contacts.
• Mechanical Damage: Broken levers, snapped plastic tabs or wear of the detent mechanism from years of use.
• Electrical Faults: Short circuits, wiring chafing or connector faults can damage the module or its functions.

Replacement And Installation Notes

General replacement procedure (overview for experienced technicians):

1. Disconnect The Battery: Always disconnect the negative terminal and wait an appropriate time for airbag system capacitors to discharge before touching the steering column.
2. Remove Steering Column Covers: Unscrew and separate the upper and lower plastic shrouds to access the stalk connectors.
3. Disconnect Electrical Connectors: Carefully unplug the multi-pin connectors. Note connector positions or take photos to ensure correct reassembly.
4. Remove The Faulty Stalk: Release retaining clips or screws and remove the stalk assembly. In some vehicles partial removal of the steering wheel or airbag may be required—follow the vehicle manufacturer’s procedure.
5. Install The Replacement: Fit the new/used stalk, reconnect connectors, reassemble column covers and reconnect the battery.

Important Safety Note: Always follow the vehicle manufacturer’s repair and safety procedures when working near the airbag and steering column. If unsure, have the replacement performed by a qualified technician.

Installation Recommendations

• Ensure Connectors Are Clean: Clean oxidized or corroded terminals before installation for reliable contact.
• Transfer Required Parts: If the vehicle requires the original radio or cruise-control sub-module or trim pieces, prepare to transfer these from the donor stalk.
• Check Related Systems: After replacement, verify wiper park position, indicator operation, trip computer functions and clear any transient fault codes with appropriate diagnostic tools.
• Use Proper Tools: Avoid forcing clips or screws. Use the correct trim tools to prevent damage to covers and trim.

Why Buy This Part

This multifunction stalk offers a cost-effective way to restore multiple steering-column functions at once. It is especially useful when individual switches fail or when mechanical damage affects several controls. Listing OEM part numbers in the product title and description helps technicians and DIYers quickly identify compatibility during repairs.

Keywords: Delphi COM2003, 96635796XT, 98069979XT, 6242AA, Steering Column Stalk, Multifunction Switch, Peugeot 307 CC, Citroën.

High-quality replacement multifunction stalk designed for Citroën and Peugeot models using the DELPHI COM2003 platform. This steering column switch assembly centralizes lighting and wiper commands, trip computer navigation and stability functions into one ergonomic stalk. Ideal for professional workshops and DIY mechanics who search by part number (96567445XT / 6242A4 / COM2003). Installing a correct multifunction stalk restores full driver control over fog lamps, wipers, cruise control and related convenience functions.

Technical Information

• Manufacturer: Delphi (OEM Supplier For Stellantis)
• Model: COM2003 Multifunction Stalk
• Product Codes: 96567445XT, 6242A4
• Additional Numbers: COM2003
• Recommended Vehicles: Peugeot 206; Peugeot 307 II; Peugeot 406; Peugeot 807; Citroën C5 I; Citroën C8; Berlingo II

Installation Recommendations

• Disconnect Battery: Always disconnect the vehicle battery before starting work and wait at least 10 minutes to allow airbag capacitors to discharge.
• Safety First: Secure the steering wheel in the straight-ahead position and follow manufacturer procedures to avoid damage to the airbag and steering column components.
• Access: Remove steering column trim panels to access mounting screws and the electrical connector for the stalk.
• Connector Handling: Carefully unplug the electrical connector; avoid pulling on the wiring harness and check connector terminals for corrosion before reassembly.
• Function Check: After installation, reconnect the battery and verify all stalk functions (lights, wipers, trip computer navigation, ESP indications, cruise control). Clear any stored fault codes using a diagnostic tool if necessary.

How The Part Is Replaced

Replacement typically involves removing the upper and lower steering column covers, unfastening the mounting screws that secure the stalk to the column, disconnecting the electrical plug, and fitting the new stalk in reverse order. Depending on vehicle equipment, some functions (for example radio controls or cruise functions) may require transferring an additional control module or re-using parts from the original stalk.

Why This Part Fails

• Mechanical Wear: Frequent mechanical use leads to worn contacts and plastic components, causing intermittent or lost functions.
• Contamination: Moisture ingress or dust can corrode electrical contacts inside the stalk or at the connector pins.
• Impact Damage: Damage from accidents or rough handling during previous repairs can break internal levers or mounting points.
• Electrical Faults: Short circuits or voltage spikes in the vehicle electrical system can damage internal electronics on multifunction stalks.

Notes For Mechanics And DIYers

This multifunction stalk is a common service item on older Citroën and Peugeot models. Matching the part number (96567445XT, 6242A4, COM2003) to the vehicle is the fastest way to confirm compatibility. When replacing the stalk, inspect the column wiring and connectors for damage and ensure secure mechanical mounting to avoid rattles and intermittent electrical faults.

High-quality multifunction steering column stalk assembly compatible with a range of Stellantis vehicles. Designed for technicians and experienced DIYers, this Delphi COM2003-based stalk unit replaces worn or faulty controls for lights, wipers, cruise control and more. Commonly searched by reference numbers 96605599XT and 6242A4, this part restores reliable switching and precise control of onboard systems. Ideal when stalks become intermittent, noisy, or fail to engage features such as the trip computer, ESP signals, or wiper functions.

Key Features

• Multifunction Control: Integrates Fog Lights, Trip Computer, Front And Rear Wiper, Wiper Sensor, ESP Signals, Cruise Control And Radio Control (Radio Switch Must Be Supplied Or Transferred).
• Delphi COM2003 Platform: Robust electronic switching technology used across various Citroën and Peugeot models.
• Direct Fit For Many Stellantis Models: Designed as a replacement for original equipment stalks with matching connectors and mounting points.
• Common Reference Numbers Included For Easy Search: 96605599XT, 6242A4, COM2003.

Technical Information

• Manufacturer: Delphi / Compatible With Stellantis (Citroën, Peugeot)
• Model: Steering Column Stalk (Multifunction) – Delphi COM2003
• Product Codes: 96605599XT; 6242A4; COM2003
• Additional Numbers: Reference Often Used In Parts Searches: 96605599XT, 6242A4, COM2003
• Compatibility Notes: Fits Various Citroën And Peugeot Models Listed Below; Verify Connector And Mounting Type Against Existing Unit Before Installation.

Compatible Models (Examples)

Citroën: C5 I, C8, Berlingo II. Peugeot: 206, 307 II, 406, 807. Compatibility May Vary By Year And Equipment Level; Compare Part References Before Ordering.

Installation Recommendations

Follow safe workshop practice when replacing the steering column stalk. Basic replacement steps:

• Disconnect Battery: Always disconnect the negative battery terminal and wait sufficient time for SRS capacitors to discharge before touching airbag components.
• Remove Airbag And Steering Wheel (If Required): Release retaining screws or clips as per manufacturer procedure. Mark Steering Wheel Position To Preserve Alignment.
• Access Stalk Assembly: Remove Column Covers To Expose Switch Unit. Unplug Electrical Connectors And Remove Fasteners Holding The Stalk Module.
• Fit New Unit: Install Replacement Stalk, Reconnect All Plugs, Reassemble Column Covers, Replace Steering Wheel And Airbag. Torque Fasteners To Manufacturer Specification.
• Functional Check: Verify Wipers, Washers, Fog Lights, Trip Computer Functions, Cruise Control And Radio Controls Operate Correctly Before Returning Vehicle To Service.

Note: Airbag And Steering Wheel Work Should Be Performed By A Trained Technician If You Are Not Experienced. Use Appropriate Tools And Follow Manufacturer Safety Procedures.

Why This Part Fails

• Mechanical Wear: Frequent Use Causes Switch Contacts And Mechanical Linkages To Wear, Leading To Intermittent Or Failed Operation.
• Electrical Contact Degradation: Carbon Tracks And Contact Surfaces Can Become Worn Or Oxidized, Causing Loss Of Function.
• Moisture And Corrosion: Water Ingress Or High Humidity Can Corrode Connectors Or Internal Contacts, Especially Around The Windscreen Sealing Area.
• Impact Or Physical Damage: Collisions, Improper Removal, Or Forced Operation May Break Switch Levers Or Mounting Points.

Practical Tips For Mechanics And DIYers

• Compare The Old Unit To The New One Visually And Match Connector Types And Pinouts.
• Check Related Fuses And Wiring If Symptoms Are Sporadic Before Replacing The Stalk.
• When Reusing A Radio Or Cruise Control Button, Ensure Proper Transfer Of Sub-Components If Required.
• Search By Part Number (96605599XT / 6242A4 / COM2003) For Fast Identification And Matching.

Warranty And Quality

Sold As A Replacement Steering Column Stalk Intended For Professional Fitment. Part Condition And Warranty Depend On The Seller; Check The Specific Offer For Coverage Details.

Original DELPHI COM2005 steering wheel controls (light and wiper stalks) for Peugeot 307 and 308. Used, fully functional disassembly part – ideal as a replacement for a faulty module that causes turn signals, wipers or fog lights to not work. Often searched by codes 96651590XT, 6242.CC, 6424.KN, 98069976XT.

Key features
– Type: COM2005 (multiplex/CAN) – cannot be confused with COM2000
– Manufacturer: DELPHI / PSA
– Functions: indicators and lights, front and rear wipers and washers, fog lights, on-board computer control (button at the end of the lever)
– Unit under the steering wheel with two levers; may also include a rotary airbag connector (clockspring) – refer to product photos
– Mostly plug & play; available functions depend on BSI configuration

OEM/PSA numbers (for search and match verification)
– 96651590XT
– 98069976XT
– 6242.CC
– 6424.KN

Compatibility
– Peugeot 307 (especially facelift with CAN, circa 2005–2008)
– Peugeot 308 I (T7, 2007–2013)
Note: Some models like the Xsara Picasso use the COM2000 version; this part is COM2005. Always check compatibility by part number and connectors.

Technical information
– Interface: PSA multiplex/CAN
– Controls: left stick (lights, indicators, fog lights), right stick (wipers/washers, rear wiper), on-board computer button
– Connectors and mechanical mounts must match your original unit
– For cars with ESP, calibration of the steering wheel angle sensor may be necessary after installation

Condition and warranty
– Used original part, tested during disassembly, visually inspected; condition see photos
– Functionality guarantee according to the conditions of our e‑shop

Installation recommendations
– Always disconnect the battery before assembly (work in the airbag area)
– Compare part numbers (eg 96651590XT / 98069976XT / 6242.CC / 6424.KN), lever designs and connectors with your old part
– If you have cruise control in your car, check if you need a version with a cruise control stick

Why choose a used original?
– Better reliability and compatibility than cheap replacements
– Significant savings compared to a new part
– Quick replacement without the need to modify the cabling

Not sure about compatibility? Send us the VIN or a photo of the label and connectors of your unit – we will verify compliance with parts 96651590XT, 98069976XT, 6242.CC, 6424.KN.

These Stalk Switches, positioned under the steering wheel, are essential for conveniently controlling various functions of your vehicle, including fog lights, front and rear wipers, onboard computer features, and the ESP system. The proper functioning of these components is crucial for safe and comfortable driving.

Technical Information:
Manufacturer: DELPHI COM2005
Model: Peugeot 307, 308
Product Codes: 96638787XT, 98070072XT, 6242HV
Other Numbers: PSA CITROEN PEUGEOT

Our used parts are meticulously assessed and prepared for installation. They are perfect for mechanics or experienced DIY enthusiasts looking for cost-effective solutions to restore vehicle functions. Each part is professionally evaluated and cleaned to ensure optimal performance and long-term reliability.

Not only do we provide high-quality replacement parts, but we also strive for their availability at competitive prices. Join our carefully selected community of satisfied customers who have access to reliable parts for their vehicles. Ensure that your Peugeot 307 or 308 remains safe and fully functional with our trusted used Stalk Switches.

The Steering Column Switch is an important component that often requires replacement due to wear and tear from regular use. It’s common for the switch to fail after several years, especially if the vehicle is frequently exposed to harsh weather conditions. Replacing this switch can significantly improve your driving experience by ensuring all controls function properly.

For car enthusiasts and mechanics, this part is essential for maintaining the efficiency and safety of your vehicle, making it a valuable addition to your repair toolkit.

Technical Information

• Manufacturer: DELPHI
• Model: Xsara Picasso
• Product Codes: 96663033XT, 6242XZ
• Other Numbers: COM2000

Steering column stalk controls DELPHI COM2003 for Peugeot 307 provide reliable operation of fog lights, front and rear wipers, headlights, cruise control and horn. Radio and onboard computer functions may require adaptation or transfer of the radio control stalk. This used auto part restores ergonomic and functional control behind the steering wheel for workshop technicians and DIY mechanics.

Compatibility And Application

Designed primarily for Peugeot 307 models, including 307 I and 307 II variants. Confirm compatibility by matching OEM product codes before ordering. This unit is often listed under the part numbers shown below and fits a range of PSA vehicles where DELPHI COM2003 stalks were used.

When And Why To Replace

Stalk switches can fail due to mechanical wear, moisture ingress, degraded electrical contacts or accidental damage. Common symptoms include intermittent or non-functioning lights, wipers, cruise control or horn. Replacing the faulty stalk assembly restores original functionality and improves driving safety and convenience.

Installation Notes

Replacement typically requires removal of the steering column trim, careful disconnection of electrical connectors and secure mounting of the new stalk assembly. Correct reassembly is important to ensure proper alignment and safety. Some functions may need coding or the transfer of existing radio/steering controls. If you are not experienced with steering column work, professional installation is recommended.

Technical Information

Manufacturer: DELPHI

Model: Peugeot 307

Product Codes: 96563489XT, 6242A6

Other Numbers: NFP, 96605601XT, COM2003

Due to the precise design and specifications of these steering column stalk controls, this part integrates with the vehicle’s electrical systems to restore full functionality. Ensure installation is carried out correctly to maintain safety and comfort while driving.

High-quality multifunction stalk assembly designed for professional workshops and DIY mechanics who maintain Citroën and Peugeot cars. This Delphi COM2000 set centralizes control of exterior lights, windshield wipers, infotainment commands and vehicle stability functions into a single, serviceable unit. Ideal for search by part number (96477540XT / 6242C4 and related references), the listing helps you quickly identify the correct replacement when diagnosing faults in the steering column controls.

Technical information

• Manufacturer: Delphi
• Model: Citroën Xsara, Citroën Xsara Picasso, Peugeot 307 (including 307 II), Peugeot 308 I
• Product Codes: 96477540XT, 6242C4, 624218, 6242J0
• Other Numbers: 623939, 6239AK, 6239M2, 6239PW, 6239W2, 96511197XT, 96542556XT, 96595087XT, COM2000

Function and Common Uses

The COM2000 stalks operate fog lights, front and rear wipers, the car radio interface, the trip/board computer and ESP related signals. In many vehicle variants the radio and cruise-control stalks are separate modules and can be fitted additionally if required.

How It Is Replaced

Replacement is straightforward for a trained technician or an experienced DIY mechanic with basic tools. General procedure: disconnect the negative battery terminal and wait a few minutes; remove steering column trim panels (retain screws/clips); unplug electrical connectors from the stalk assembly; release retaining clips or screws and remove the old stalk unit; fit the new COM2000 assembly ensuring correct orientation; reconnect all plugs and reassemble trims; reconnect the battery and verify all functions (lights, wipers, radio controls, trip computer and ESP warnings). Always follow vehicle manufacturer safety steps for handling steering column components and airbags.

Installation Recommendations

• Always Disconnect The Battery Before Work—wait at least 5–10 minutes to discharge capacitors and avoid airbag deployment risk.
• Keep Connectors Clean—inspect plugs for corrosion or bent pins and clean contact surfaces before reconnecting.
• Use Proper Tools—avoid damaging trim clips and steering column covers; use appropriate screwdrivers and plastic trim tools.
• Test All Functions After Fitment—verify lighting, wipers, radio controls, trip computer and ESP indicators before returning the vehicle to service.

Why This Part Fails Most Often

Multifunction stalk failures are usually caused by normal wear of internal electrical contacts and sliding carbon tracks, moisture ingress leading to corrosion, or mechanical damage to the plastic levers and retaining clips. Heavy use of stalk switches (frequent wiper and light operation), water leaks into the column area, or previous collision damage to the steering column are common contributors. Fault symptoms include intermittent operation, complete loss of certain functions (e.g., wipers or fog lights), or stuck/mechanically loose stalks.

Notes For Professionals

This product is aimed at workshops and experienced DIYers. The item is typically searched by reference numbers—include those in your diagnostics and parts lookup to ensure quick match. If additional radio or cruise-control stalks are required, they can be sourced separately to restore full functionality.