This multifunction steering column stalk assembly (COM2005) is a direct-fit electrical control unit used on the Peugeot 207. Designed for professional workshops and experienced DIY mechanics, this unit consolidates multiple driver controls into a single compact module—improving reliability and simplifying steering column wiring. Clear OEM product codes make it easy to locate the correct replacement part and speed up repairs.

Features

Multifunction design combining stalk switches for lights, indicators, fog lamps, front and rear wipers, horn and ESP-related inputs. Robust electrical connectors and integrated microswitches provide factory-equivalent functionality. Ideal for restoring lost or intermittent control functions without extensive rewiring.

Technical Information

• Manufacturer: Valeo (OEM Supplier for Peugeot/Stellantis)
• Model: Peugeot 207
• Product Codes: 96661299XT, 6242YN, COM2005
• Other Numbers: NFP (as referenced)

Compatibility

Fits Peugeot 207 models equipped with the COM2005 multifunction steering column block. Suitable for both standard and common equipment variants of the 207 series where the listed product codes match.

How It Works And Function

The assembly translates mechanical stalk movements into electrical signals for multiple vehicle systems: lighting (low/high beam, turn signals), fog lights, wipers (intermittent, low/high, rear), horn and inputs related to ESP. It replaces individual switches and provides centralized switching logic at the steering column interface.

Typical Failure Modes And Why It Goes Bad

Common causes of failure include worn microswitch contacts, mechanical wear of the stalk mechanisms, contamination or corrosion of electrical contacts, and damage to internal ribbon cables or connectors. Symptoms are intermittent or non-functional indicators, stuck wipers, loss of horn or lighting functions, and sporadic ESP warnings. Environmental exposure and repeated mechanical use accelerate wear.

Replacement Frequency

There Is No Fixed Interval For Replacement. Lifespan Depends On Usage And Environmental Conditions. Replace The Unit When You Observe Persistent Electrical Or Mechanical Faults That Affect Safety Or Control Functions.

Installation

Before starting, ensure the vehicle is secured and on a flat surface. Recommended general steps for a skilled technician or experienced DIY mechanic:

• Disconnect The Battery To Prevent Short Circuits And Airbag Deployment.
• Remove Steering Column Trim Panels To Access The Stalk Assembly.
• Unplug Electrical Connectors And Note Their Positions; Release Any Retaining Clips Or Screws.
• Remove The Faulty Stalk Assembly And Install The Replacement, Ensuring Correct Orientation.
• Reconnect Connectors, Reassemble Trim, Reconnect The Battery And Test All Functions Thoroughly (Indicators, Lights, Wipers, Horn, ESP Inputs).

Installation Recommendations

Use Proper Torques For Fasteners And Avoid Pulling On Wiring Harnesses. Inspect Connectors For Corrosion And Clean Or Replace If Necessary. When Replacing The Unit, Verify That Connector Pins Are Straight And Fully Seated. If Intermittent Electrical Faults Persist, Check Wiring To The Steering Column And Ground Points.

Notes For Professionals

This Module Is An Electrical/Mechanical Assembly—Handle With Care To Avoid Damaging Internal Switches. When Diagnosing, Use A Multimeter To Verify Continuity And Signal Presence At The Module Connectors Before Full Replacement. Keep The Steering Wheel Centered When Removing Components To Avoid Clock Spring Damage.

Why Choose This Part

Direct-fit part numbers and OEM-style construction make this COM2005 Valeo unit a practical repair choice for restoring full steering column functionality on affected Peugeot 207 vehicles. Clear product codes speed up identification and reduce downtime in the workshop.

The Valeo COM 2005 multifunction steering column stalk for Peugeot 207 is a direct-fit replacement for worn or faulty stalks. Searched frequently by part numbers 96630724XT and 624258, this unit restores dependable control of exterior lights and cabin functions. Designed for professional fitters and experienced DIY mechanics, the switch block offers the usual controls in a compact assembly that mounts to the steering column behind the steering wheel.

Function and Application

This multifunction stalk controls:

• Front fog lights
• Rear wiper and washer
• Audio/radio remote controls (where equipped)
• Trip computer cycling and reset

The cruise control activation stalk is available separately and is not included with this unit.

How To Replace

Replacement of the steering column stalk should be performed by a qualified mechanic or an experienced DIYer who follows safety procedures. Typical replacement steps:

• Disconnect the vehicle battery and wait several minutes to prevent accidental airbag deployment.
• Remove the steering wheel covers and, if required, the steering wheel (follow manufacturer procedure).
• Unplug the electrical connector(s) from the old stalk and release retaining clips or screws.
• Remove the defective stalk and install the new unit in the same position; secure clips/screws to the specified torque.
• Reconnect the electrical connector(s), reassemble column covers and reconnect the battery.
• Verify all functions (lights, wiper, radio controls, trip computer) operate correctly before road use.

Technical Information

• Manufacturer: Valeo
• Model: Peugeot 207
• Product Codes: 96630724XT, 624258
• Additional Numbers: COM2005

Installation Recommendations

• Always disconnect the battery before starting work and follow Peugeot safety procedures to avoid airbag damage.
• Work on a flat surface and keep small fasteners and clips organized for correct reassembly.
• Use correct tools and torque settings for steering column fasteners; avoid forcing connectors to prevent terminal damage.
• Inspect wiring harness and plug contacts for corrosion or damage; clean or repair connectors if necessary before fitting the new stalk.
• After installation, check every function (including intermittent positions) and ensure no warning lights appear on the instrument cluster.

Why This Part Most Often Fails

Typical failure causes for steering column stalks include:

• Wear of internal contact surfaces from repeated use, causing intermittent or non-functional switches.
• Ingress of moisture or contamination that leads to corrosion of electrical contacts.
• Broken plastic mounts or clips due to mechanical stress, improper removal or steering column impact.
• Damaged wiring or connector pins from poor handling or previous repairs.

Choosing a correct replacement and careful installation will reliably restore all stalk functions. Part numbers 96630724XT and 624258 are commonly used when searching for this Valeo COM 2005 unit for Peugeot 207 models.

Thanks to their multifunctionality, the controls allow for convenient operation of fog lights, rear wipers, and radios directly from the driver’s position. An integrated rain sensor further enhances driving safety in adverse weather conditions by automatically activating the wipers.

Technical Information:
Manufacturer: VALEO
Model: CITROËN C2, C3, PEUGEOT 1007
Product Codes: 96474025XT, 96576781XT, 6239X0
Additional Numbers: COM2002

When replacing the old control with a new one, it’s important to verify the product’s compatibility with your vehicle and ensure that all connections are correctly attached. Replacement parts should be installed by a trained technician to avoid any issues related to improper installation.

With our used parts, you gain not only quality and reliability but also a cost-effective solution that is much friendlier than purchasing new components. All our products undergo thorough inspection, so you can expect performance comparable to original new parts.

Overview

This multifunction steering-column switch (COM2005) by Valeo is a direct-fit control unit for the Peugeot 207 that consolidates lighting, fog lamps, wiper and horn controls into a single compact module. Commonly referenced by part numbers 96661300XT and 6242YP, the switch is often searched by these codes when mechanics or DIY enthusiasts are sourcing a replacement. The unit restores full cockpit control functionality and is suitable for workshop replacement.

Key Features

• Multifunction Design: Integrates headlight, fog light, front and rear wiper, and horn controls into one module.
• OE Fitment: Designed to match the original COM2005 Valeo specification used on Peugeot 207 models.
• Direct Replacement: Same mounting and electrical connectors as the original part for straightforward swap.
• Durable Construction: Internal sliding contacts and mechanical detents for tactile feedback.

Compatibility And Fitment

Fits Peugeot 207 models equipped with the COM2005 multifunction stalk assembly. Always verify the vehicle’s existing part number (96661300XT / 6242YP / COM2005) against the replacement to ensure correct fitment.

Technical Information

• Manufacturer: Valeo
• Model: Peugeot 207
• Product Codes: 96661300XT, 6242YP
• Other Numbers: COM2005

Installation Recommendations

• Safety First: Disconnect the battery before starting work and wait a few minutes to ensure airbags and vehicle electronics are discharged.
• Removal Steps (Typical): Remove steering wheel airbag (follow manufacturer safety procedure), mark steering wheel position, remove steering wheel, remove upper and lower column covers, unplug connector(s) and unclip the old stalk assembly.
• Fitting Steps: Install new stalk in reverse order, reconnect electrical connectors securely, refit covers and steering wheel, torque fasteners to manufacturer specifications, reconnect the battery.
• Post-Installation Checks: Verify operation of headlights, fog lights, front and rear wipers, intermittent settings and horn. If the steering wheel or steering angle sensor was disturbed during the procedure, perform required recalibration according to vehicle service documentation.
• Recommendation: Replacement is within the skill set of experienced DIYers, but if airbag or steering components are removed, consider professional service to ensure safety and correct recalibration.

Why This Part Fails

• Wear Of Internal Contacts: Repeated switching causes contact erosion or intermittent connections, leading to unreliable operation of lights or wipers.
• Mechanical Damage: Plastic detents, levers or clips can break from forceful use or aging, causing loose or inoperative stalk movement.
• Contamination And Corrosion: Moisture, dirt or condensed humidity can corrode terminals and moving contacts, especially in older cars or vehicles exposed to harsh environments.
• Electrical Faults: Short circuits or wiring damage in the column harness may mimic stalk failure but can also stress the switch and accelerate wear.

Notes

Searches are commonly performed using the product codes 96661300XT and 6242YP or the designation COM2005. This helps garages and private owners quickly find the correct replacement for Peugeot 207 vehicles. After replacing the stalk, always confirm full functionality of all controlled systems during a test drive.

Looking for reliable replacement parts for your Peugeot 207? Our steering column controls with product codes 96657280XT and 6242SL are the perfect choice for professional mechanics and DIY enthusiasts aiming to keep their vehicles in top condition. This original VALEO part is engineered for seamless operation of vital functions directly from the steering wheel area.

With high-quality manufacturing and precise compatibility with Peugeot 207 models, this component ensures smooth functionality and significantly enhances your vehicle’s overall safety. Installation can be easily performed by experienced mechanics or skilled car owners, saving time and reducing repair costs.

Technical Information:

Manufacturer: VALEO
Model: Peugeot 207
Product Codes: 96657280XT, 6242SL
Additional Numbers: NFP

These controls are ready for immediate installation and use. Choose parts that help maintain your vehicle’s flawless operation. Order now to receive quality components with guaranteed compatibility and long service life. Your satisfaction and safety are our top priorities!

All offered parts undergo strict quality control and are carefully selected from our range. We guarantee reliability and high standards for all auto parts sold.

Enhance the functionality of your Peugeot 207 CC with this high-quality Steering Column Switch. Designed specifically for the 2005 model, this switch allows you to control key features such as your vehicle’s lights, fog lights, front wipers, and horn, ensuring a smooth and safe driving experience.

Replacement Information

The Steering Column Switch is a crucial component that may wear out over time due to regular use. Common signs of failure include malfunctioning lights or wipers. If you notice such symptoms, it’s advisable to replace the switch to maintain optimal vehicle functionality.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Peugeot 207 CC
• Product Codes: 96657284XT, 6242S2
• Other Numbers: 6242S2

These switches manage crucial functionalities such as headlights, fog lights, radio controls, cruise control, ESP, and the front and rear windshield wipers. A functional steering column switch ensures a smooth and safe driving experience by allowing easy access to essential controls. Common issues with older or worn-out switches may include faulty signal operations or intermittent failures, often due to wear and tear over time.

For ease of installation, you can have your old switch replaced at our partner service in Most, or opt for our mobile mechanic service, which brings the expertise right to your doorstep.

Technical Information

• Manufacturer: Valeo
• Model: Steering Column Switch
• Product Codes: 96488239XT, 6239HV
• Additional Numbers: COM2002

With the part number 96474013XT and alternative number 6239W8, this switch manages critical operations including headlights, fog lights, the radio, cruise control, front and rear wipers, the sensor, and the horn. It’s a vital element for ensuring safety and functionality while driving.

Over time, steering column switches may wear out due to regular usage, leading to malfunction or complete failure. Common issues can arise from faulty connections or wear on the internal components. It is advisable to inspect and replace the switch if you experience problems with controlling lights, wipers, or other functions.

Technical Information

• Manufacturer: PSA
• Model: Citroën C2, C3; Peugeot 1007
• Product Codes: 96474013XT
• Additional Numbers: 6239W8

This is a used steering column stalk assembly intended for Peugeot 207 models. Manufactured by Valeo (OE supplier for Stellantis), this multi-function stalk controls fog lamps, the rear wiper and basic radio functions. The part is commonly sought under OE codes 96657282XT and 6242SP, which makes it ideal for mechanics and DIYers searching by product number.

Features

• Direct-fit replacement for Peugeot 207 steering column mounted stalk.
• Controls Front/Rear Fog Lights, Rear Wiper/Washer and Radio Command Inputs.
• Compatible With Vehicles Using Valeo COM Stalk Assemblies (2005 Era).
• Coded With OE Numbers For Easy Cross-Reference: 96657282XT, 6242SP.
• Option To Add Cruise Control Stalk Separately Where Applicable.

Technical Information

• Manufacturer: Valeo (OE Supplier For Stellantis)
• Model: Peugeot 207 (2005)
• Product Codes: 96657282XT, 6242SP
• Other Numbers: NFP

Installation Recommendations

• Disconnect The Battery Before Starting Work To Prevent Short Circuits And Faults In The Vehicle Electronics.
• Remove Steering Column Covers To Access The Stalk Assembly—Usually Secured With Torx Or Phillips Screws.
• Unplug The Electrical Connector Carefully; Avoid Pulling On Wiring Harnesses.
• Replace The Stalk And Refit The Covers In Reverse Order. Check That All Mechanical Clips And Screws Are Secure.
• After Installation, Test All Functions: Fog Lights, Rear Wiper/Washer, Radio Controls And Any Additional Features.
• If Vehicle Shows Electronic Errors After Fitment, Clear Fault Codes With A Diagnostic Tool And Recheck Functionality.

Most Common Failure Reasons

Wear And Tear On Internal Contacts: Frequent Use Of Switch Contacts (Wipers, Fog Lights) Leads To Contact Oxidation Or Loss Of Conductivity Over Time. Mechanical Damage: Physical Impact Or Broken Clips During Steering Column Removal/Installation. Electrical Issues: Corroded Pins Or Damaged Wiring In The Connector Causing Intermittent Operation. Accumulation Of Moisture Or Dirt Can Also Accelerate Contact Failure.

Why Choose This Part

Well-Matched OE Reference Numbers Make This Stalk Easy To Identify For Repairs. Suited For Professional Workshops And Experienced DIYers Who Need A Direct Replacement For Peugeot 207 Models. Clear Function Mapping (Fog Lights, Rear Wiper, Radio) Ensures Fast Diagnosis And Repair During Workshop Time.

Notes On Compatibility

Search By OE Codes 96657282XT Or 6242SP For Quick Cross-Reference. Ensure Physical Match To Existing Stalk: Connector Shape, Mounting Points And Function Set Must Correspond To Your Vehicle’s Equipment Level.

This switch is built to meet high standards of quality and reliability, ensuring that you can drive with peace of mind. Over time, these switches can wear out or malfunction due to regular use, leading to issues with functionality. By replacing a faulty switch promptly, you can restore full control over your vehicle’s essential functions.

Technical Information

• Manufacturer: VALEO
• Model: Peugeot 207
• Product Codes: 96630730XT, 624262
• Other Numbers: Not applicable