This complete lock kit is designed for fast replacement of worn or damaged locks on Citroën models. It includes the door lock for the driver’s side, the fuel filler flap lock and the ignition barrel together with two keys (keys may be blank or without remote buttons). Ideal for workshops and experienced DIYers looking to restore mechanical security and reliable starting functionality. Common search terms include the product codes 4162AH and 4162AG, as many technicians and owners look up parts by reference number.

The set replaces the mechanical locking components responsible for securing the vehicle and allowing the key to start the engine. Replacing the worn locks reduces the risk of lock jamming, broken keys in the cylinder and fuel cap theft. Keys supplied usually need cutting to match your vehicle; if the vehicle uses a transponder immobiliser, the transponder must be present in the key or reprogrammed to restore engine start functionality.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C2, Citroën C3, Citroën C3 Pluriel
• Product Codes: 4162AH, 4162AG
• Additional Numbers: 4162AH/4162AG

Installation Recommendations

Installation is straightforward for a trained mechanic and feasible for skilled DIYers with basic tools. Follow these general steps:

• Disconnect the vehicle battery before working on the ignition barrel to avoid electrical shorts or unintended airbag/immobiliser triggers.
• For the driver’s door lock: remove the inner door trim, detach window/lock linkages and remove the fixing screws or rivets securing the lock. Fit the new lock, reconnect linkages and test mechanical operation before reassembling the door panel.
• For the fuel filler flap lock: open the filler flap, remove any retaining screws and replace the lock module, checking the flap operation and seal.
• For the ignition barrel: remove the steering column covers, release the retaining screw or clip, withdraw the old barrel and install the replacement. Ensure the ignition switch positions work correctly and reconnect the battery only after confirming mechanical fit.
• Have the keys cut precisely and, if necessary, ensure transponder programming is performed when required by the vehicle’s immobiliser system.
• Use graphite or lock-specific lubricant for the tumblers; avoid wet oils that attract dirt.

Why This Part Fails

Locks and ignition barrels fail for several common reasons: mechanical wear of tumblers and wafers from long-term use, corrosion and water ingress (especially in older cars or in damp climates), broken or worn key teeth, vandalism or forced entry attempts, and deterioration of plastic components and linkages. Lack of lubrication and accumulation of dirt can accelerate wear and cause sticking or jamming.

Notes For Buyers

Searches by the product codes 4162AH and 4162AG are common—if you have those numbers matching your part, this kit is likely the replacement you need. Keys supplied may not include remote buttons; remote functions and key programming are not included with the mechanical lock set. If you are not experienced with steering column or door disassembly, we recommend professional installation to ensure safe and correct operation.

The electric tailgate lock for Citroën C3 Pluriel cars is a practical and sought-after part that ensures the correct function of opening and closing the trunk. The electric actuator (lock servo) controls the rear lid lock mechanism and takes care of safe closing and convenient unlocking of the trunk lid.

This part is suitable as a replacement in the event of a failure of the original lock, symptoms such as the trunk not opening, spontaneous closing, error messages from the on-board computer or irregular response to controls. A used original part from a Citroën / Peugeot car is often a more reliable alternative to cheap universal replacements and better matches the electrical installation and mechanical design of a particular model.

Technical information
Manufacturer: PSA / Citroën / Peugeot
Model: Citroën C3 Pluriel (rear trunk lid)
Part Type: Electric Tailgate Lock (Servo, Trunk Lock Actuator)
Product codes: 661523, 661522, 334250
Other numbers: may also appear under PSA internal or warehouse designations
Condition: original used PSA part (Citroën / Peugeot)
Installation position: rear trunk lid (fifth door)

With the listed product codes 661523, 661522, and 334250, this part is often easily located by auto mechanics and DIYers who search directly by part number. This is an original PSA part, which is structurally adapted for the Citroën C3 Pluriel, including the correct connectors, mounting and stroke of the actuator.

Installation recommendations
– Before removing the old part, disconnect the vehicle’s battery to avoid a short circuit or error messages in the control unit.
– Carefully remove the inner plastic lining of the back cover to avoid breaking the clips or damaging the upholstery.
– Check the wiring and connector – broken wires or oxidized contacts are often the problem. If necessary, clean the contacts.
– When installing a new electric lock, make sure it is seated correctly in the original mounting points and use the correct screws/mounts.
– Before final assembly of the lining, test the function of closing and opening the trunk several times (with a key, button, remote control – depending on the car’s equipment).
– After connecting the battery, check that there are no error messages and that the lock works smoothly, without unusual noise or stuttering.

A properly functioning electric tailgate lock is important both for the convenience of everyday use and for the safe locking of the luggage compartment of the Citroën C3 Pluriel. This original used part is a suitable choice when repairing or replacing a malfunctioning trunk lock.

The Citroën C3 Pluriel 4PIN electric right door lock with codes 46978880 and 9136P9 is an ideal spare part for right door central locking repairs. Thanks to the original PSA codes, it is often easily found by auto mechanics and DIYers who are looking for a specific part by number.

This lock is designed exclusively for the Citroën C3 Pluriel model and is connected using a 4-pin electrical connector. The correct function of central locking is essential both from the point of view of comfort and safety – a faulty lock can cause problems with locking the car, incorrect closing of the doors or outages with the remote control.

Technical information:
Manufacturer: PSA (Citroën / Peugeot)
Model: Citroën C3 Pluriel
Location: right front door (right side of car)
Part type: electric central locking door lock
Number of connector pins: 4 PIN
Product codes: 46978880, 9136P9
Other numbers: may also be listed as a genuine PSA OE part for C3 Pluriel right door lock
Condition: used original part

Thanks to the original numbers 46978880 and 9136P9, this lock is especially suitable for professional workshops and auto mechanics who need to quickly and accurately replace a faulty lock, but also for car owners who repair their car themselves and are looking for a reliable part at a reasonable price.

Installation recommendations:
– Before removing the old lock, disconnect the car battery to avoid short circuits and errors in the central locking control unit.
– Remove the door panel carefully so as not to damage the plastic clips and seals.
– Check the condition of the pull rods and the plastic grips between the handle and the lock, replace them if they are damaged or worn out.
– When installing a new lock, make sure that it is correctly seated in the door casing and that the screws are firmly tightened.
– Clean the electrical connector of the lock, in case of oxidation, use a contact spray and firmly snap the connector.
– After installation, check the function of the central locking of all doors, including control from the remote control and from the internal button.
– Check that the door closes correctly, does not remain “on the first latch” and that the car does not unlock again after locking.

A properly fitted Citroën C3 Pluriel 4PIN 46978880 9136P9 right door lock will restore the trouble-free function of central locking and improve the daily use of the car.

Product description
Original used electric central locking lock for the right front door (passenger) Citroën C3. Version with 5-pin connector. Ideal replacement in case of failure of the door actuator/lock or door position microswitches. Parts with this designation are often listed as NFP (not supplied) at PSA, so this used original is an excellent solution.

Key features
– Location: right front door (passenger)
– Function: electric lock/central locking actuator
– Connector: 5 PIN
– Power supply: 12 V (on-board network)
– Condition: original used PSA part, dismantled from a Citroën C3

Compatibility
– Citroën C3 (verify according to the part number and the design of the 5 PIN connector; we recommend comparing with the part from the car and according to the VIN/Diagbox)
Note: Different years and trims may have different versions of locks (especially pin numbers and connector shape). Always verify compliance before ordering.

OE/OEM numbers (often searched for)
– PSA: 9136.N6, 9136N6
– Alternative/replaced: 9136.N5, 9136N5 (for PSA conducted as NFP – no longer supplied)
– Production/cat. reference: 46982880

Technical information
– Part type: door lock module with electric drive (actuator) and integrated door status switches
– Connection: 1x multi-pin connector, 5 pins
– Side: right hand front (RHF – Right Hand Front)
– Purpose: central locking, opening/closing signaling, secure door locking

Assembly and tips
– Before assembly, compare the part number and number of pins with the original part.
– It is recommended to check the function of the rods and the adjustment of the crank; in case of oxidation of the connector, clean and treat with contact spray.
– After installation, test the central locking and the door open indication on the dashboard.

Why choose this part?
– Original PSA design = exact compatibility and reliable function
– Savings over a new part which may be NFP (not available)
– Quick solution to the typical central locking fault on the Citroën C3

Search tip
Also search as: C3 door lock front right, C3 lock actuator 5pin, Citroën C3 passenger lock mechanism, 9136N6, 9136N5, 46982880.

Are you looking for a reliable way to restore the functionality of locks in your Citroën vehicle? The Lock Set and Key Kit we offer is the perfect choice for owners of Citroën C2 and C3 vehicles. This set includes locks for the driver’s door, fuel cap, and ignition switch. Additionally, it comes with 2 keys, ensuring you always have a spare key handy.

This lock set is designed to replace original locks, which are often a source of trouble due to wear or damage. As any experienced mechanic knows, locks and keys are among the most frequently replaced components in older vehicle models, as worn locks can cause difficulties in opening or locking the doors or fuel cap.

Technical Information:
Manufacturer: Citroën
Model: Citroën C2, Citroën C3
Product Codes: 4162CL, 4162AH
Additional Numbers: PSA CITROEN PEUGEOT 4162AH 4162CL

This Lock Set and Key Kit provides excellent compatibility and reliability for the specified vehicle models. Not only does it help restore the original security standards of your car, but it also enhances convenience in its use, eliminating issues related to damaged or malfunctioning locks. Investing in quality replacement parts like this lock set saves not only money on potential repairs but also prevents further complications that could arise from using a faulty security system.

Let your vehicle function safely again with our Lock Set and Keys. An ideal solution for anyone who repairs their own car or for experienced mechanics searching for reliable and compatible replacement parts for their customers.

The Citroën C2 and C3 models are known for common locking system issues, and timely replacement can prevent security vulnerabilities. Regular wear and tear can cause locks to fail, which is why having a reliable set is crucial for maintaining your car’s integrity.

Installation is straightforward, making it suitable for mechanics and DIY enthusiasts alike. Simply replace the old locks with the new ones following the vehicle’s manual, ensuring that your locks function properly.

Technical Information

• Manufacturer: Citroën
• Model: C2, C3
• Product Codes: 4162FP
• Additional Numbers: N/A

Upgrade your vehicle’s security and restore functionality with this reliable lock set today!

This complete lock set is designed for Citroën models and provides a cost-effective solution for replacing worn or damaged locking components. The kit includes the driver-side door lock, fuel filler cap lock and ignition lock cylinder together with two keys (keys may be standard and may not include remote buttons). Ideal for professional workshops and experienced DIY mechanics, this set is often sought by part number 4162AG / 4162AH and improves vehicle security and convenience after installation.

Benefits: easy replacement of multiple locks at once, single-keyed set for convenience, OEM-compatible fit for specified Citroën models, and reduced downtime compared with sourcing individual components.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C2; Citroën C3; Citroën C3 Pluriel
• Product Codes: 4162AG, 4162AH
• Other Numbers: Commonly referenced under the same codes 4162AG / 4162AH

Function And Common Faults

The set performs three functions: securing the driver door, locking the fuel filler flap and enabling vehicle start/immobiliser operation via the ignition lock cylinder. Typical causes of failure include mechanical wear of tumblers and keys, corrosion from moisture ingress, broken plastic components inside the lock assembly and worn key profiles. Electrical faults related to remote fobs are separate—note that supplied keys may not include remote control buttons.

Replacement And Installation

Basic replacement overview for experienced mechanics or competent DIYers:

• Prepare: Gather trim removal tools, Torx/screwdriver set and penetrating lubricant. Disconnect the negative battery terminal before working on the ignition cylinder to avoid short circuits.
• Door Lock: Remove the door card to access the lock mechanism, disconnect linkage rods and electrical connectors (if present), remove retaining bolts, swap the lock cylinder and reassemble, checking latch operation and link adjustments.
• Fuel Filler Lock: Access the filler lock either through the inner wing/boot lining or by opening the filler flap; remove fasteners, install new lock and test release mechanism.
• Ignition Lock Cylinder: Remove steering column covers, ensure steering wheel lock is disengaged, remove retaining screw(s) and withdraw the old cylinder with the key in the release position, install the new cylinder and reassemble. Verify ignition positions and immobiliser response before reconnecting the battery.

Installation Recommendations

• Use light graphite or dedicated lock lubricant on new cylinders and keys; avoid oily lubricants that attract dirt.
• Check and clean linkages and actuators when replacing locks to prevent premature wear.
• Test all functions (door locking, fuel flap release, ignition turn/start) before final reassembly.
• If unsure about ignition cylinder removal or immobiliser behaviours, seek professional workshop assistance to avoid immobiliser faults.

Why The Part Most Commonly Fails

Locks and cylinders are exposed to mechanical stress and environmental factors. Repeated use causes tumbler wear and key profile degradation. Moisture and salt (road conditions) accelerate corrosion, seizing moving parts. Forced entry attempts or vandalism can also damage lock housings and linkages. In ignition cylinders, broken keys or internal plastic/component wear are frequent failure modes.

When searching for this item, use product codes 4162AG or 4162AH to increase the chance of finding the exact match for Citroën C2/C3 applications.

This 6-pin electric door lock is designed for the right rear door of the Citroën C3 and provides reliable central locking operation for professional workshops and experienced DIYers. Ideal when the door fails to lock or unlock consistently, the unit replaces the internal latch and actuator assembly and restores smooth, secure door operation. Commonly referenced by product codes 46978180 and 9138C1, this part is searchable by those numbers for quick identification.

The lock houses the actuator motor and mechanical latch that interact with the central locking system. When fitted, it receives the lock/unlock signal via the 6-pin connector and moves the internal linkage to secure or release the door. Typical symptoms that indicate replacement are intermittent locking, audible grinding or whining from the door, inability to lock or unlock that specific door while other doors operate normally, or physical jamming of the latch.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C3 (Right Rear Door)
• Product Codes: 9138C1, 46978180
• Other Numbers: NFP
• Connector: 6-Pin Electrical Connector

Installation Recommendations

• Prepare Basic Tools: Phillips and Torx drivers, trim removal tools, pliers, and a small ratchet set.
• Safety First: Disconnect the negative battery terminal briefly to avoid short circuits while working on the electrical connector.
• Remove Door Trim: Carefully prise off the door card and remove any vapor barriers to access the lock assembly. Keep clips and screws organized.
• Disconnect Wiring: Unplug the 6-pin connector and detach any linkages or rods from the latch; note or photograph their positions to ensure correct reassembly.
• Replace Unit: Remove the old lock module, fit the new unit in the same orientation, reconnect linkages and the 6-pin connector, and secure mounting fasteners to original torque points.
• Function Check: Reconnect the battery, test central locking cycles and manual operation before refitting the door trim. Ensure the latch engages smoothly and that sensors or child locks function as expected.
• Final Steps: Apply light lubricant to moving parts if needed and reassemble the door panel, checking for rattle-free fitment.

Why This Part Fails Most Often

• Mechanical Wear: Repeated cycles lead to worn gears or plastic components inside the actuator and latch.
• Water Ingress And Corrosion: Moisture reaching the mechanism or connector causes corrosion and electrical faults.
• Electrical Connector Issues: Poor contact, damaged pins, or wiring harness faults cause intermittent operation.
• Impact Damage Or Misalignment: Door impacts or misaligned striker plates can overload the latch and cause premature failure.
• Poor Lubrication: Dry or contaminated moving parts increase friction and accelerate wear.

Searchable by its OE numbers 46978180 and 9138C1, this genuine-style 6-pin right rear door lock is a practical replacement to restore reliable central locking on Citroën C3 models. Compatible fitment should be confirmed against vehicle model and door side based on your vehicle specification prior to installation.

Product Overview

This electric lock actuator is a direct replacement for the left rear (driver’s side rear) door of Citroën C3 models equipped with a 6-pin connector. It operates the central locking mechanism to lock and unlock the door remotely or via the vehicle’s lock/unlock switches. Commonly referenced under part numbers 46978280 and 9137A1 (also shown as 9137.A1), this actuator is suitable for mechanics and DIYers who need a reliable spare part to restore proper door locking function. Keywords: Citroën C3 left rear door lock actuator, central locking actuator, 6-pin actuator, 46978280, 9137A1.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C3 — Left Rear Door
• Product Codes: 46978280, 9137A1, 9137.A1
• Additional Numbers: NFP

Function

The actuator converts electrical signals from the central locking system into mechanical movement that engages or releases the door lock. It contains a small electric motor and internal gearing that drives the lock mechanism when receiving the lock/unlock command.

Reasons For Failure

Actuators typically fail due to mechanical wear of internal gears, broken plastic components, water ingress and corrosion, electrical connector oxidation, or motor burnout from repeated use. Freezing, impact damage to the door, and poor sealing of the door cavity accelerate degradation.

Installation Recommendations

Basic Replacement Steps: Disconnect the negative battery terminal or ensure ignition is off. Remove interior door trim and any moisture barrier as needed to access the lock assembly. Locate the actuator and disconnect the 6-pin electrical connector. Unfasten mounting screws or clips and detach linkage rods from the actuator. Install the new actuator by securing mounting points, reconnecting linkage rods and the 6-pin connector, then test lock/unlock operation before refitting the door trim. Reassemble in reverse order.

Recommended Tools And Tips: Use trim removal tools, suitable screwdrivers or driver bits, and a multimeter to verify power at the connector if diagnosing. Avoid forcing plastic clips—replace any damaged trim clips. Apply a small amount of appropriate lubricant to mechanical linkages after installation. Verify that the connector pins are clean and free of corrosion prior to assembly.

Notes For Mechanics And DIYers

Confirm that the vehicle uses a 6-pin connector and that one of the listed product codes matches the existing part before installation. Testing electrical supply at the connector and inspecting fuses and wiring can prevent unnecessary replacement if the issue is electrical upstream of the actuator. Replacement typically restores normal central locking operation quickly and is a common repair in bodywork and electrical maintenance.

Why Choose This Part

Direct-fit design and OEM-referenced numbers make this actuator a practical choice for efficient workshop repairs or self-maintenance. Including the correct product code in searches increases the chance of finding the exact item quickly and ensures a proper fit for the Citroën C3 left rear door application.

Product Overview

This electric central locking actuator for the Right Front Door is designed for Citroën C3 models. Built to restore reliable door locking and remote central locking function, this unit is a direct-fit replacement for worn or failed door lock actuators. Ideal for professional mechanics and competent DIY enthusiasts, the actuator accepts a 4‑pin electrical connector and interfaces with the vehicle’s door latch mechanism and central locking system.

Why Choose This Part

• Direct Replacement: Matches original mounting points and electrical connector for straightforward installation.
• OEM Reference Numbers Included: Customers often search by product codes 46983280 or 9136N7 — include these in your search to find this item quickly.
• Cost Effective Repair: Replacing the actuator restores central locking without replacing the entire latch assembly in most cases.

How It Works

The actuator converts electrical signals from the central locking system into mechanical motion to lock or unlock the door latch. When the lock/unlock signal is received, a small electric motor and internal gear train move the latch selector rod. Proper operation depends on the internal motor, gears, linkage, and a secure electrical connection via the 4‑pin connector.

Replacement Procedure (General Guide)

• Prepare: Park the car on a level surface, engage parking brake and remove the key from ignition.
• Safety: Disconnect the battery before starting to avoid short circuits and to prevent accidental activation of electrical systems.
• Door Trim Removal: Remove the inner door trim panel and vapor barrier to access the latch and actuator. Keep fasteners organized.
• Disconnect: Unplug the 4‑pin connector and detach any linkage or rods connected to the actuator. Note rod positions for correct reassembly.
• Remove Actuator: Unscrew the actuator from the latch assembly, install the new unit, reconnect linkages and wiring, then test operation before reassembling the door trim.
• Test: Reconnect the battery and verify locking/unlocking works from remote, door switch and central locking cycle. Ensure smooth mechanical movement and no binding.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C3
• Product Codes: 46983280, 9136N7
• Additional Numbers: NFP

Mounting Recommendations

Always disconnect the battery before removing or installing the actuator. Handle the actuator and door wiring harness carefully to avoid damaging plugs and plastic clips. Use the correct tools to remove door trim without breaking retainers. Before final reassembly, operate the lock several times to confirm correct mechanical linkage and electrical connection. If door drainage is compromised, repair seals to prevent water ingress into the actuator area.

Why This Part Commonly Fails

Common failure modes include motor wear, stripped internal gears, broken or fatigued linkage clips, and corrosion or water ingress that causes electrical faults or mechanical seizure. Frequent short trips with many cycles, exposure to moisture, and contaminated door cavities accelerate wear. Symptoms of failure are intermittent or complete loss of locking/unlocking function for the right front door, unusual noises from the door when operating locks, or the actuator running but not moving the latch due to broken internal gears.

Notes For Mechanics And DIYers

Keep the door interior clean and check drainage channels when replacing the actuator. If diagnosing intermittent faults, inspect wiring and connectors for corrosion or damage before replacing the actuator. Use the product codes 46983280 and 9136N7 when searching for compatible parts or cross-references to ensure you get the correct unit.