Right rear door control cable (Bowden/rods) for Citroën C -Crosser and Peugeot 4007. Original part PSA 9138Q6 with links to locks marked 9151CP and 9151CR. The ideal solution, if the rear right door (passenger party at the LHD) cannot be opened from the inside or from the outside, the handle has a heavy running or does not provide a lock. The original design ensures accurate storage in the door plate and trouble -free connection to the inner/outer handle and lock.

Why to reach the original ropes: exact length and endings, quiet and smooth operation, correct radius of guidance and long life. In the case of aftermarket replacements, we often encounter different shapes, inaccurate lengths and subsequent need for modifications. This part is from the car the same model line, so it fits without intervention.

Typical manifestations of defects and when to replace the cables:

• The handle goes hard or returns delayed
• doors do not open from the outside/inside (cracked or roded bowden)
• The lock does not delete despite the audible click of the actuator
• Damage of a tubing, corrosion or break of the cable in the endings

Basic installation instructions (informatively):

• Remove the door panel, carefully peel off the vapor -proof foil
• snap the ends of the cable from the outer and internal handles and from the lock
• guide the new cable in the original holders, pay attention to the correct break and storage of the tubing
• Click the endings, check free click and lock function before closing the door

Construction is a set of control cables between handles and lock. The cable transmits strength from the handle to the latch of the castle; Over time, the lubricant, suction of moisture and corrosion, or the wire rupture, which occurs with worse operation or complete malfunction. The replacement usually solves problems without having to change the entire lock if the lock itself is fine.

technical information

• Manufacturer: PSA – Citroën/Peugeot
• Model: Citroën C -Crosser; Peugeot 4007; Location: Right rear door
• product codes: 9138Q6; 9151CP; 9151Cr
• additional numbers: 9138.Q6; 9151.cp; 9151.CR; 9138 Q6; 9151 CP; 9151 Cr

Compatibility: Designed for Citroën C – Crosser and Peugeot 4007 with lock mechanism corresponding to codes above. Before ordering, we recommend comparing the numbers on your part and location (right rear doors).

The electric rear door lock for the Citroën C-Crosser and Peugeot 4007. The original part of the PSA concern with the code 9137N0 ensures safe locking and unlocking of the door within the central locking system. Suitable as a replacement for a non -functional lock (manifestations: does not unlock/does not lock on the first attempt, reacts only sometimes, clicks without moving the pull, it is not possible to open from the outside/from the inside).

The part is designed for the left rear doors (LH rear) and comes as a complete electric lock module. The construction combines a mechanical latch and an electric motor with microswitches; Over time, motorbikes or microswitches may wear or fatigue plastic gears. Replacing the entire lock to restore the correct functioning of central locking and secure door.

Installation is usually a direct confusion for the original piece. In practice, the removal of the door filling is procedure, disconnecting the external/internal handles, clinging the locking, disconnecting the electrical connector and dismantling the locking screws of the lock; Subsequently, the new module in the opposite sequence is installed. It is recommended to compare the part number 9137N0 and the type of connector (number of pins) with your original lock before assembly.

• Restoring reliable central locking of the rear door
• Suitable for Citroën C-Crosser and Peugeot 4007 (typically years of manufacture 2007–2012)
• left rear lock (LH rear) – correct orientation is essential
• Simple replacement with conventional service tools

technical information

• Manufacturer: PSA (Citroën/Peugeot)
• Model: Citroën C-Crosser; Peugeot 4007
• product codes: 9137n0
• additional numbers: 9137 N0; 9137.n0

Tip for diagnostics: If the rear left doors do not respond to the DO, but the other doors do, there is a defect in this lock/actuator. Also check the bundle in the bushing between the body and the door to ensure that the power line is not damaged.

Electric rear lid lock (fifth door) for Citroën C -Crosser and Peugeot 4007. The part ensures locking and unlocking the upper hinged doors through central locking and the integrated micro -board gives the control unit information about closing the lid. Suitable as a direct replacement for the original part of the dog with codes 8719H3 / 1619251880.

This lock is most often solved in the case of such types: The suitcase cannot be opened/locked, the lock just clicks without any reinsurance, the on -board computer reports the “open fifth door”, the interior lighting remains lit or the rear windows are not working due to the open lid detection. This is due to the wear of the electric motor/actuator, tired microswitch, moisture entering into the mechanism or damage to the cabling in the doorway.

Compatibility: Citroën C -Crosser (approx. 2007–2012) and Peugeot 4007 (approx. 2007–2012). It is a lock of the upper hinged doors (not any lower folding parts), dimensional and electrically corresponding to the original – without the need for modifications.

Installation is straightforward and managed in the workshop and at home. Recommended procedure: Disconnect the battery, remove the inner plastic lid lining, disconnect the electrical connector of the lock, release the fastening screws (usually Torx), raise the rod/control cable and remove the lock. Sit the new piece in its original position, connect the connector and pull, tighten the screws. Before deploying the lining, make a trial closing and check the function of the central locking and proper closing. If necessary, fine -tune the latch position/firing pin to the door to close smoothly and without a wound.

For a long life, check the status of the rubber seal around the lid and the cable bundle in the bushage – the water intrusion and the correct clearance of the cabling significantly reduce the risk of repeated defects.

technical information

• Manufacturer: PSA (Citroën/Peugeot)
• Model: Citroën C -Crosser (2007–2012), Peugeot 4007 (2007–2012)
• product codes: 8719H3, 8719.h3, 1619251880
• Other numbers: 8719 H3, 16 192 518 80, 1619 251 880

Keywords for quick search: Fifth door lock, rear lid lock, trunk lock, lid electrical lock, Citroën C -Crosser, Peugeot 4007, 8719H3, 1619251880.

Original electric front door lock designed for Citroën C-Crosser and Peugeot 4007. Parts with OE 9135cc (9135.CC) are fully compatible with the central locking system and the electronics of the car. Ideal replacement for defective actuator/lock mechanism in the left front door (page of the driver for cars with left -hand driving).

Lock function: integrates the electrical drive of central locking, lock mechanics and forwards information about locking/unlocking into the control units. The defective lock is usually manifested by the fact that the door cannot be locked/unlocked remotely, responds only occasionally, there is a weak “click” without moving the latch, or the door is only open from one side. A common cause is a worn electric motor of the actuator or tired microswitches.

Mounting tips for car mechanics: disconnect the battery (protection of electronics and airbags in the door before work), remove the tapec (buckle/screws), disconnect the lock connector and pull out the rods from the internal and outer handles. The lock is usually secured by Torx screws on the edge of the door. After installing the new lock, check the proper operation of the rods, stops and test the central lock function and mechanical departments repeatedly. Also check the bundle in the bushing between the body and the door with the problems.

This piece is an original used part of the removal. Before purchasing, we recommend comparing the part number and a connector with an existing car lock. Precise compatibility may vary according to the year of production and equipment – ideally verify according to VIN.

technical information

• Manufacturer: PSA (Citroën/Peugeot)
• Model: Citroën C-Crosser (left front door), Peugeot 4007 (left front door)
• product codes: 9135cc, 9135.CC
• Other numbers: 9135 CC (writing variant)

Keywords for easy search: Left front door lock, central locking actuator, Citroen C-Crosser, Peugeot 4007, OE 9135cc, 9135.CC.

Left front door control cable for Citroën C -Crosser and Peugeot 4007. It is a set of ropes that transmits movement from the inner/outer handle to the door lock body. Ideal solution for opening door opening, outdated or “dead” crank, or broken or stiff bowden. Also sought under codes 9135cc, 9151CF, 9151CH.

Typical symptoms of defect: doors do not open from the inside or outside, the handle has no resistance or scrubs, greater forces to open. This is due to the fatigue of the cable wire, corrosion in bowden or broken endings in plastic holders. Replacing the cables returns the lock full of function and a certain operation of the click.

Assembly recommendations: To replace it, it is necessary to remove the door panel, disconnect the rods/cable pipes from the handle and lock, release the locking clips and lead new cables in the same routes. Make sure the endings in the body of the chateau and the handle and the smooth arc without breaking out. Work with common body equipment (Torx, clips, pliers). Verify the function of the internal and outer handles before the definitive composition.

Compatibility: Designed for the left front door (for the steering wheel on the left is the driver’s side). Compare the codes, lengths and ends of the cables with the original work before purchasing to ensure that the correct confusion is ensured.

technical information

• Manufacturer: PSA Citroën/Peugeot
• Model: Citroën C -Crosser (left front door), Peugeot 4007 (left front door)
• product codes: 9135cc, 9151CF, 9151CH
• Other numbers: 9135.cc, 9151.cf, 9151.ch

Alternative names: door lock cables, bowden handles, door lock cable pipelines, inner/outer handles. If you are solving the problem with opening the left front doors at C -Crossser or 4007, the replacement of this set of ropes is a quick and effective repair.

The right front door lock for the Citroën C -Crosser and the Peugeot 4007. This is an original part of the PSA production, which ensures mechanical connection of the door handle to the lock and reliable opening from the inside and from the outside. Ideal replacement for damaged or pulled cable (bowden) of the castle, often also sought under OEM codes 9151CG and 9151CJ.

Functions and typical manifestations of defects: The cables transmit the tension from the inner/outer handle to the lock mechanism. During wear, there may be difficult opening, a great will in the handle, the need to “drag” the handle or the inability to open the door. Most often, the ends of the cable and sections in sharp bends leave, where the cable is pulled or stuck over time.

Installation Note: Replacing is performed after the door fill is removed. After reversing the clamps and bolts, carefully remove the tapecírunk, disconnect the rods from the handle and lock and attach the ropes in the same line as the original (pay attention to the correct ending). For the right front doors (for cars with left -hand drive a party of the passenger), we recommend checking the status of the plastic clips of filling and possibly replace them. Torx screws and clips are usually used to disassemble.

Compatibility: Designed for Citroën C – Crosser and Peugeot 4007. These cars were produced in 2007–2012; The ropes are the right front door for the position. Before purchasing, compare the OE/OEM number and the location of the part on the car so that the assembly and function are 100% identical to the original part.

technical information

• Manufacturer: PSA (Citroën/Peugeot)
• Model: Citroën C -Crosser (2007–2012), Peugeot 4007 (2007–2012), right front doors
• Product codes: 9151cg, 9151CJ
• additional numbers: 9136CQ, 91356CQ

Advantages of the original part: the exact length and ending of the ropes for the correct operation of the castle, quiet and smooth operation without stuck and long life in the correct guidance. To be sure, always compare the shape/ends of the cable and the above codes with your original work.

Original electric front door lock (passenger) for Citroën C-Crosser and Peugeot 4007. Complete lock module with integrated central locking actuator ensures smooth unlocking/locking, safe finish and proper function sensors. Ideal replacement for a failure of central locking or mechanical wear of the original part.

Suitable solution for car repair and home repairs: thanks to the accurate match of attachment and connector, the installation is straightforward and without the need for modifications. The original part from the PSA concern provides the right compatibility with the car electronics, including features such as Deadcko (double lock) or opening blocking when driving if the car is equipment.

Typical symptoms of defective door lock: The door cannot be unlocked/locked by the central, accidental unlocking, clicking without the movement of the latch, the need for multiple control of the driver, or the impossibility of opening from the inside or from the outside. The replacement prevents further wear of the rods and handles and restores the reliability of everyday use.

Mounting tips: Remove the door panel, release the vapor -proof foil, disconnect the handles/cable pipes and the lock connector. The lock is usually attached by three screws on the edge of the door; After unscrewing them, remove the lock together with the latch leash. Before the final closure of the filling, test the function of the central locking and the correct operation of the click from the outside and the inside. Pay attention to the confusion of the pages – this part is designed exclusively for the right front door.

Compatibility: Citroën C-Crosser and Peugeot 4007 (SUV, common platform), model years approximately 2007–2012. Before purchasing, we recommend verifying the conformity of the Part code and the connector with your car.

technical information

• manufacturer: dog (Citroën/Peugeot) – original part
• Model: Citroën C-Crosser (about 2007–2012), Peugeot 4007 (about 2007–2012)
• product codes: 9136CQ, 9136.CQ
• additional numbers: 9136 cq

For the correct selection, compare the code from your original lock, position (front right door) and connector type. This part is suitable as a direct replacement without modifications and restores the full functionality of central locking and secure door closing.

Original electric rear door lock (PZ) for Citroën C -Crosser and Peugeot 4007. This is a complete unit of lock with servomotor and microswitters designed for right rear doors that restores the full function of central locking and safe. OEM PSA code: 9138Q6.

Compatibility is aimed at C -Crosser and 4007 produced in approximately 2007–2012, where the lock is a direct replacement for the original part. Correct attachment, corresponding to the connector and length of the rods ensure trouble -free assembly of the plug -and -play type without modifications. Thanks to the original design, the function of central locking and connection with the electronics of the car remains.

Typical manifestations of the defects of the original lock: doors do not unlock or do not lock over the remote control, the lock only “clicks” without the movement of the latch, sporadic functioning at low temperatures, or the need to unlock mechanically from the inside. This is due to the worn actuator motor, polluted or stiff mechanics, or the microswitch failure.

Installation and tips: disconnect the battery before work. Remove the door fill (handles and screws TORX, plastic pins), carefully remove the vapor -proof film, disconnect the electrical connector of the lock and release the rods of the outer/internal handles. The lock is attached screws in the door edge; After removal, install the spare part in the same position, connect the rods and connector, before the final composition test the function of the central locking and mechanical control. It is recommended to check the running of the rods and the lock mechanism and lightly lubricate with suitable lubricants.

To be sure, always compare the part number on your original lock (9138Q6 / 9138.Q6), the position of the part (right rear doors – Right Rear, RH Rear, PZ) and the shape of the electric connector. This avoids confusion for the left rear or front lock.

technical information

• Manufacturer: PSA Peugeot Citroën (OE)
• Model: Citroën C -Crosser (about 2007–2012), Peugeot 4007 (about 2007–2012)
• Product codes: 9138Q6, 9138.Q6, 9138 Q6
• Other numbers: OE 9138Q6 (PSA), RIGHT REAR / RH REAR / PZ

This part is suitable for quick and efficient repair of problems with the locking of the right rear doors on the models. The advantage of the original solution is accurate landing, reliable communication with central locking control unit and long -term mechanical resistance.

Lock control cable set for left rear doors designed for Citroën C -Crosser and Peugeot 4007. This is the original part of the dog, which replaces worn or cracked cable and restores the correct functioning of internal and outer handles. Suitable for repairs where the handle goes “empty”, the door does not open from the outside/inside or is running the lock. OEM Codes: 9151CN, 9151CQ.

The control cable (bowden) mechanically connects the inner and outer handle to the door lock. The exact length and ending of the endings ensure trouble -free deployment without modification and reliable function after assembly. This set is designed for the left rear door and fits the door lock with 9137N0.

Typical defects that this replacement solves: broken or pulled out cable, cracked plastic ending at the handles/lock, a stiff bowden due to dirt and moisture. In older cars, the replacement of the cables is a frequent and quick solution of non -functional door opening.

Assembly Recommendations: Remove the rear door fill, disconnect the handles of the handles and burst the original cables from the lock and the handle. Remove the new rope in the same way as the original, click the endings into the lock and click, check the correct settlement in the holders. Before closing the filler, try the operation of click from outside and from the inside and the function of the children’s fuse; Alternatively, lubricate the mechanism with a suitable lubricant.

technical information

• Manufacturer: PSA (Citroën/Peugeot)
• Model: Citroën C -Crosser (left rear door), Peugeot 4007 (left rear door)
• product codes: 9151Cn, 9151CQ
• Other numbers: 9137n0 (lock to which the cable fit)

If your rear left door does not respond to the handle, the replacement of these ropes is a quick and cost -effective repair. Thanks to the original parameters for C -Crosser and 4007 you get accurate landing, proper operation of the lock and reliable door opening without the need for modifications.