This used electric rear door/tailgate lock is an original-equipment solution for Citroën and Peugeot models and is commonly searched by product numbers 9671153480 and 8719G5. Designed for professional workshops and confident DIY mechanics, the unit restores secure central locking and reliable tailgate operation. Compatibility with popular models such as Citroën C3 Picasso, Citroën C4 Picasso, Citroën C5 X7, Peugeot 207 and Peugeot 308 makes this part a frequent replacement in bodywork and electrical repairs.

Technical Information

Manufacturer: Stellantis (Citroën / Peugeot)
Model: Citroën C3 Picasso, Citroën C4 Picasso, Citroën C5 X7, Peugeot 207, Peugeot 308
Product Codes: 9671153480, 8719G5
Additional Numbers: 8719G5, 9671153480

Function And Application

The lock assembly secures and releases the rear door or tailgate as part of the vehicle’s central locking system. The unit contains mechanical latches and an electrical actuator that receives locking/unlocking commands from the remote key, central locking module or interior switches. When functioning correctly it ensures reliable closure, prevents unwanted opening during driving and integrates with convenience functions such as remote unlocking and alarm sensors.

Typical Failure Modes

• Water Ingress And Corrosion: Moisture penetration can corrode electrical contacts and metal linkages, causing intermittent operation or complete failure.
• Worn Plastic Gears Or Mechanical Linkage: Repeated use and age can wear internal plastic components or break linkage arms, preventing the latch from engaging.
• Actuator Motor Failure: The small electric motor or solenoid inside the unit can seize or lose power due to wear or electrical faults.
• Connector Or Wiring Issues: Corroded pins, damaged wires or poor grounding may interrupt signals to the lock.
• Impact Damage: Rear-end collisions or forceful closing can bend or damage the latch mechanism.

Replacement And Installation

Basic replacement steps (for experienced technicians or informed DIYers):

• Disconnect The Battery Before Starting Work To Prevent Short Circuits.
• Remove Interior Trim Of The Rear Door/Tailgate To Access The Lock Assembly.
• Disconnect The Electrical Connector And Any Linkage Rods Or Cables; Note Their Positions For Reassembly.
• Unscrew The Fixing Bolts And Extract The Old Lock Unit.
• Transfer Any Required Mechanical Parts (If Applicable) From The Old Unit To The New One.
• Fit The New Lock, Reconnect Linkages And Electrical Connector, Refit Trim And Reconnect The Battery.
• Check Function: Test Locking/Unlocking With Remote And Interior Switches; Verify Mechanical Latch Engagement.

Installation Recommendations

• Use Correct Tools And Take Care With Plastic Trim Clips To Avoid Breakage.
• If Connector Pins Show Corrosion, Clean Or Replace Them Before Reassembly.
• Apply Dielectric Grease To Electrical Connectors To Reduce Future Corrosion.
• Ensure Linkage Rods Are Properly Adjusted And Secure To Avoid Misalignment Of The Latch.
• After Installation, Cycle The Lock Several Times And Check That The Tailgate Closes And Latches Securely.

Why The Part Most Often Fails

Environmental exposure (water, road salt) and mechanical wear are the primary causes of failure. The combination of water ingress and aging plastic/metal components leads to corrosion, seized actuators or broken internal gears. Frequent use, impacts and poor sealing around the tailgate area accelerate deterioration.

Notes For Buyers

This item is commonly identified in searches by the OEM numbers 9671153480 and 8719G5. When replacing the lock, follow manufacturer procedures and vehicle-specific guides for access and adjustment. Suitable for professional garages and skilled DIY mechanics familiar with door trim removal and electrical connections.

Product Description

This electric rear liftgate lock is an OEM-style replacement designed for Citroën C4 Picasso, Citroën C5 X7 and Peugeot 207 models. It restores reliable central locking and secure closing of the tailgate by replacing a worn or failed latch/actuator assembly. Ideal for professional workshops and experienced DIY mechanics who search by OE numbers such as 9660403980, 871992 or 8719G5.

Key Features and Benefits

• Direct Fit For Easy Replacement: Designed to match original mounting points and connector layout for a straightforward swap.
• Restores Tailgate Functionality: Re-establishes secure locking, eliminates intermittent unlocking/closing faults and prevents water entry when sealing is intact.
• OE Reference Numbers Included: Commonly referenced by part numbers 9660403980, 871992, 8719G5 to simplify search and ordering.
• Suitable For Workshops And DIYers: Clear replacement procedure and basic electrical checks make this part accessible to trained enthusiasts and professionals.

Installation Recommendations

Follow a methodical process to replace the rear liftgate lock:

• Safety First: Disconnect the vehicle battery before starting work to avoid short circuits and accidental central locking activation.
• Access: Remove the inner tailgate trim panel to reach the lock assembly. Retain all clips and screws.
• Disconnect: Unplug the electrical connector and disconnect any mechanical linkages or rods from the latch mechanism.
• Removal: Unscrew the latch/actuator from the tailgate and extract carefully to avoid damaging the surrounding seals and wiring harness.
• Fitment: Install the new lock in reverse order. Ensure the actuator and latch engage correctly with the striker and that linkages are routed without kinks.
• Adjustment And Test: Before reassembling trim, reconnect the battery and cycle the central locking, remote release and manual operation to confirm proper locking and unlocking. Check tailgate alignment and sealing.
• Protection: Apply dielectric grease to electrical contacts and check the condition of the rubber grommet and wiring to prevent moisture ingress.

Most Common Failure Causes

• Water Ingress And Corrosion: Moisture can penetrate the latch area, corroding electrical contacts and mechanical components.
• Mechanical Wear: Internal gears, pawls or springs wear out after years of use, causing the latch to stick or fail to lock.
• Damaged Linkages Or Striker Misalignment: Bent rods or misaligned striker plates prevent full engagement of the latch.
• Electrical Faults: Broken wires, connector corrosion or actuator motor failure lead to intermittent or permanent loss of function.
• Impact Damage: Rear collisions or heavy slamming of the tailgate can deform the latch or its mountings.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot OEM)
• Model: Citroën C4 Picasso, Citroën C5 X7, Peugeot 207
• Product Codes: 9660403980, 871992, 8719G5
• Other Numbers: 871992 | 8719G5 | 9660403980

Notes For Mechanics

When replacing the lock, inspect the tailgate seal, striker plate and wiring harness. Address any rust or alignment issues to avoid repeat failures. If electrical problems persist after fitting the new lock, verify central locking system power, ground connections and fuses before replacing additional components.

The driver’s door lock for Peugeot 207 is an original used part from the PSA model range, which ensures safe closing and unlocking of the left front door (driver’s door). Due to the precise design and identical product codes, it is suitable as a replacement for a damaged or non-functional lock, without the need for modifications to the bodywork or electrical installation.

This lock is designed for the Peugeot 207 in hatchback and station wagon (SW) versions and is equipped with an integrated electric mechanism for central locking. A used original part usually fits better than universal replacements and helps prevent problems with door adjustment, leaks or poor locking functionality.

Technical information:
Manufacturer: PSA CITROEN PEUGEOT
Model: Peugeot 207 (hatchback, station wagon SW), left front door – driver’s door
Location: front left door (driver)
Part type: door lock with electric control (central locking)

Product codes:
24090816
24087819
24091816

Other numbers:
24087158
24088158
24086158
9135V9

Installation recommendations:
Before dismantling the old lock, disconnect the battery to avoid damage to the wiring or incorrect entries in the control units. When replacing, proceed according to the service manual – dismantle the door panel, carefully loosen the rods and connectors so as not to break them. Check the condition of the pull rods, plastic handles and seals in the door, or replace them immediately. After installing the new lock, check the correct function of central locking, mechanical unlocking with a key and opening with a handle from the outside and from the inside. Consistent adjustment and tightening of screws helps prevent door squeaks and poor closing. For a professional result, installation by an experienced auto mechanic is suitable.

The front right door lock for the Peugeot 207 is intended for the passenger door of the hatchback and station wagon bodies. This is an original used part produced by the PSA concern, suitable for replacing a damaged or non-functional central locking lock. Thanks to a properly functioning lock, the front door will close, lock and unlock both mechanically with a key and via central locking.

This part is often searched for by the product numbers listed below. Code matching is very important for used car parts, as the locks may have different electrical equipment or mechanical design depending on the year of manufacture and the specific equipment of the car.

Manufacturer:
DOG CITROEN PEUGEOT

Model:
Peugeot 207 – front right door (passenger door), hatchback and station wagon

Product codes:
24099816
24097816
24095816
24094158
24095158
24093158
9136W6

Other numbers:
The designation of the part may differ slightly on the label or casting (suffixes, production series), but the same basic number from the above list is important.

Technical information:
– Location: right front door – passenger door
– Functions: mechanical door locking + cooperation with central locking
– Designed for Peugeot 207 cars (depending on equipment version and year of manufacture)
– Electric design: lock with integrated electric control for central locking
– Used original part from the dismantling of the car

Installation recommendations:
– Before installation, check the mechanical operation of the lock and the condition of the door pulls and levers.
– When disassembling the old lock, note the position of the rods and connectors, this will facilitate assembly.
– Always secure the electrical connector carefully – a poor contact can cause occasional central locking problems.
– Check the condition of the seals in the door to prevent water and dirt from entering the lock.
– After installation, test the function of the lock with the key and the remote control: locking/unlocking, internal handle and child lock (if it is on the car).
– Professional assembly by a car mechanic is recommended, or the procedure according to the original Peugeot service manual, especially due to the correct setting of the tie rods and the safe reassembly of the doors.

The Peugeot 207 left rear door lock is designed for hatchback and station wagon versions and is installed in the door behind the driver (left rear door). This is an original used part from the PSA concern, suitable for repairs to the central locking and door mechanics of the Peugeot 207 model. Thanks to this lock, the rear door remains properly closed, lockable and securely secured while driving.

Manufacturer: PSA Citroën Peugeot
Model: Peugeot 207 (hatchback, station wagon – left rear door behind the driver)
Product codes: 24087816, 24091816
Other numbers: 24090158, 24092158, 24089158, 9137F9E

The used original rear door lock is especially suitable for auto mechanics and home repairers who need to reliably solve problems with non-functioning central locking, door jamming or mechanical damage to the original lock. The original part usually ensures a better service life and precise fit than cheap universal replacements.

Installation recommendations:
– Before removing the original lock, disconnect the battery to avoid a short circuit or error messages in the central locking control unit.
– Carefully dismantle the inner door panel and check the condition of the rods, cables and connectors. Replace damaged plastic handles or broken tie rods.
– Before installing a new lock, check the compatibility of the connectors and the mechanical attachment. Install the lock in the original mounting points and tighten the screws securely.
– Check the smooth operation of the handle from the outside and the inside, the function of the child lock (if it is in the door), and the correct response of the central locking to the remote control and key locking.
– After installation, perform a test drive and open and close the door several times to verify that there is no rubbing, poor closing or spontaneous unlocking.

The Peugeot 207 left front door lock with designation 24087158 and code 9135V9 is intended for Peugeot 207 models in hatchback and station wagon body versions. This is an original used part from disassembly, suitable as a replacement for a damaged or non-functional door lock. Thanks to the preservation of the original design and dimensions, the correct function of the central locking and mechanical door opening is ensured.

This lock is often searched for by product numbers, which may vary by production series. In the description below, you will find an overview of the codes used, by which you can easily identify the part.

Technical information:
Manufacturer: PSA Peugeot Citroën
Model: Peugeot 207 (hatchback, station wagon)
Location: Left Front Door (Driver)
Part type: door lock / door lock with central locking

Product codes:
24087158
24088158
24086158
9135V9

Other numbers:
There may also be workshop or supplier numbers directly on the lock body that correspond to the listed PSA codes. In practice, this part is primarily searched for by code 9135V9 and numbers 24087158 / 24088158 / 24086158.

Typical manifestations of a defect in the original lock, when this part is a suitable replacement:
– central locking does not lock or unlock the left front door
– the door is difficult to open or remains stuck
– microswitch problem – the car does not “know” that the door is closed or open
– irregular remote locking function only for the left front door

Advantages of using the original Peugeot 207 door lock:
– geometrically precise seating in the original mounts
– compatibility with original wiring and control
– maintenance of the correct function of central locking, alarm and open door signaling

Installation recommendations:
– disconnect the battery before disassembly to avoid a short circuit in the electrical installation of the door
– carefully dismantle the door upholstery, release the plastic handles gradually so as not to break them
– check the connectors and wiring harness to the lock, clean any oxidation with a suitable contact spray
– before final tightening of the lock screws, try manually closing and opening the door, or adjust the position of the lock
– after installation, test the function of the lock several times: mechanical opening with a key, control from the interior, central locking and remote control
– it is recommended to lightly lubricate the moving mechanical parts of the lock with a lubricant suitable for car locks, but not with an excessive amount, so as not to collect dust

This Peugeot 207 front left door lock with code 9135V9 and numbers 24087158, 24088158 and 24086158 is an ideal choice for auto mechanics and DIYers who are looking for working original used parts and want to restore reliable and secure door opening and locking to their car.

This lock for the driver’s front door is intended for Peugeot 207 cars in the hatchback and estate versions. This is an original used part from disassembly, suitable as a replacement for a damaged or non-functional door lock. Thanks to its original design, it fits in its original place and enables full functionality of locking, unlocking and central locking of the driver’s door.

Manufacturer: PSA / Peugeot
Model: Peugeot 207 (hatchback, station wagon)
Location: front left door – driver’s door

Product codes:
24094158
24095158
24093158
9136W6

Other numbers:
They may vary depending on the car version (equipment, year of manufacture, type of central locking), but there is always a match with one of the numbers listed above.

Technical information:
– left front door lock (driver)
– part of the central locking system
– electrical control (connection to the central locking unit)
– mechanical connection to the door handle and internal opening mechanism
– original used design from Peugeot 207 cars

Thanks to the use of an original part, the correct locking function and communication with the rest of the car’s electrical installation are maintained. Suitable for auto mechanics and home repairers who need to quickly replace a faulty lock and restore the car’s secure closure.

Installation recommendations:
– before removing the old lock, disconnect the vehicle battery to avoid damaging the electrical circuits
– carefully remove the door trim and plastic covers to prevent them from breaking
– physically compare the old and new lock (shape, connectors, tie rods) before the assembly itself
– check the condition of the tie rods and cables from the handle, clean them and lubricate them with a suitable lubricant if necessary
– during assembly, make sure that the connectors are properly engaged and that all the rods are attached to the lock levers
– after installing the lock, first test the manual and remote locking function with the door open
– check that the door can be opened smoothly from the outside and from the inside and that the central locking system responds without delay

A correctly installed front driver’s door lock ensures reliable locking of the car, smooth opening and safe operation of the Peugeot 207.

The Peugeot 207 left rear door lock is intended for installation on the left rear door behind the passenger on Peugeot 207 cars in hatchback and station wagon body versions. This is an original electric door lock with central locking, which ensures reliable closing and unlocking of the doors, safe securing while driving and proper functioning of the car’s comfort systems.

This part is suitable as a replacement for a damaged or non-functioning lock when there are problems with locking/unlocking the door, jamming of the handle, impossibility to open or close the door, or central locking malfunctions on only one door. Thanks to the preservation of the original specifications, the correct function of the electrical control and the mechanical operation of the lock is ensured.

Technical information:
Manufacturer: PSA (Citroën / Peugeot)
Model: Peugeot 207 (hatchback, station wagon / SW) – left rear door behind the passenger
Location: left rear door, side behind the passenger
Part type: electric door lock / rear door central locking

Product codes:
24090158
24092158
24089158
9137F9

Other numbers:
It can also be marked as rear left door lock, rear left door lock, rear left door latch for Peugeot 207 in various catalog or service systems.

The part is suitable for use especially during professional repairs in car repair shops as well as during home repairs, when a functional replacement of the original lock is required without the need to modify the attachment or electrical installation.

Installation recommendations:
Before removing the old lock, disconnect the vehicle’s battery to avoid a short circuit or errors in the control units. Disassemble the inner door panel, carefully release the rods from the handle and from the central locking and disconnect the electrical connector. When installing a new lock, check the condition of the pull rods, plastic clips and seals in the door, replace them if necessary. Carefully place the lock in the door in its original position and properly tighten the fastening screws. After connecting the connector and reconnecting the battery, test the function of the central locking, the external and internal handles and the child lock, before refitting the door trim. For professional installation, it is advisable to carry out a test of all doors after installation and a short test drive to verify the correct closing and locking of the doors.

Overview

This electric rear door (tailgate) lock is a direct-fit replacement designed for Citroën and Peugeot models. It integrates the latch mechanism and electric actuator to operate with the vehicle’s central locking system and remote key. Ideal for professional workshops and DIY mechanics, the unit is commonly searched by part numbers 9671153780 and 8719G5, which improves findability for technicians and parts purchasers.

Application

Compatible Models (examples): Citroën C3 Picasso, Citroën C4 Picasso, Citroën C5 X7, Peugeot 207, Peugeot 308. Always match the part number listed on the unit to the vehicle’s existing part to confirm fitment.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Rear Door / Tailgate Lock
• Product Codes: 9671153780, 8719G5
• Additional Numbers: 9671153780 | 8719G5

Installation Recommendations

Prior to any work, disconnect the battery to avoid short circuits and potential damage to electrical components. Typical replacement steps:

1. Open the tailgate and remove the interior trim panel using appropriate trim tools to avoid damage.
2. Locate and disconnect the electrical connector from the lock unit.
3. Unbolt the lock mechanism from the tailgate and detach any mechanical linkages or rods. Note the routing and orientation for reassembly.
4. Install the new unit, reconnect linkages and the electrical connector, and secure all fasteners to the original positions.
5. Reinstall the trim panel and reconnect the battery. Test the lock operation with the central locking, remote key and manual release to confirm correct function and alignment.

Use appropriate hand tools and a trim removal set. After installation, check latch alignment and lubricate moving points with a suitable lubricant to ensure smooth operation.

Most Common Reasons For Failure

• Water Ingress And Corrosion: Exposure to moisture can corrode electrical contacts or mechanical parts.
• Mechanical Wear: Repeated use leads to worn gears, broken plastic components or seized linkages.
• Actuator Or Microswitch Failure: Electrical motor or internal switches can fail, preventing locking/unlocking.
• Connector Or Wiring Damage: Chafed wires or poor connector contacts cause intermittent or permanent faults.
• Impact Damage Or Misalignment: Tailgate impacts or improper alignment can deform the latch and prevent engagement.

Symptoms Indicating Replacement

Common symptoms include inability to lock or unlock the tailgate with the remote or central locking, abnormal grinding or clicking noises from the lock area, or intermittent operation. Addressing faults early prevents further damage to linkages and surrounding trim.

Notes

This part is supplied as a replacement lock unit for the listed Citroën and Peugeot models. Verify the part number stamped on the old unit matches one of the product codes above before installation. Professional installation is recommended for complex central locking systems or when access to specialized tools is required.

The Right Rear Door Lock, identified by product codes 24099158 and 9138H8, is specifically designed for the Peugeot 207 hatchback and estate models. This lock is an essential component for ensuring the security and proper closure of your vehicle’s rear doors.

If you are searching for a reliable door lock for your Peugeot 207, this part offers a perfect solution. Suitable for both professional mechanics and DIY enthusiasts, this right rear door lock provides dependable performance and safety, preserving the integrity of your vehicle.

Technical Information

• Manufacturer: PSA Citroen Peugeot
• Model: Peugeot 207 (hatchback, estate)
• Product Codes: 24099158, 9138H8
• Additional Numbers: Typically marked on the lock itself

This door lock is ideal for replacing worn or damaged original parts. Installation is straightforward and can be performed with basic tools at home or by a professional workshop. The lock plays a critical role in vehicle security by ensuring doors close correctly and stay securely locked.

For skilled mechanics or car owners who prefer self-repairs, this component meets high standards of reliability and durability. Having a functioning rear door lock is crucial to prevent minor issues from developing into serious problems, making this part a smart addition to your vehicle maintenance.

If you have any questions regarding compatibility or installation, our support team is available to assist you. Verify that this part matches your vehicle’s specifications and product codes before purchase to ensure optimal performance and safety.

We focus on supplying thoroughly checked used parts, providing cost-effective and trustworthy solutions. Even though this right rear door lock is a used item, it guarantees reliable service and value for your Peugeot 207’s repair and upkeep needs.