Product Overview

This instrument cluster combines the Speedometer, Tachometer (RPM), Integrated Navigation Display (NAVI), Engine Coolant Temperature Gauge and Fuel Level Indicator in one complete unit. It is a direct-fit instrument panel originally from Citroën C8 and commonly sought by mechanics and DIY enthusiasts searching by OEM numbers 9643753080 or 6105Z0. The unit is ideal for replacing a faulty dashboard display to restore accurate vehicle information and navigation feedback.

Key Features

• Clear analog gauges for Speed and Engine RPM with integrated digital/navigation segment.
• Displays Engine Coolant Temperature and Fuel Level for reliable vehicle monitoring.
• OEM Part Numbers: 9643753080, 6105Z0 — often used as search keywords in spare parts listings.
• Designed to fit Citroën C8 applications and also compatible with Peugeot 807 in many configurations.
• Suitable for professional garages and skilled DIY repairs.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C8 (original unit from 2003); Compatible With Peugeot 807
• Product Codes: 9643753080, 6105Z0
• Other Numbers: NFP

Installation Recommendations

Professional installation is recommended for consistent results. Typical replacement steps:

• Disconnect the negative battery terminal before starting work to avoid short circuits and potential data corruption.
• Remove surrounding dashboard trim carefully using appropriate trim tools to avoid damage to clips and finish.
• Unscrew the instrument cluster fasteners and gently pull the cluster forward to access connectors.
• Release electrical connectors and any antenna/navigation cables, then remove the old unit.
• Fit the replacement cluster, reconnect harnesses and cables, secure with original fasteners and refit trim.
• Reconnect the battery and verify all functions: gauges, warning lights, illumination and navigation display.

Note: If the replacement unit originates from a different vehicle or shows missing functions after installation, professional configuration or coding with PSA diagnostic equipment (e.g., DiagBox) may be required to restore full functionality.

Reason for Common Failures

• Age and Wear: Mechanical stepper motors and moving parts for analogue gauges wear over time and can lose accuracy.
• Electrical Issues: Faulty illumination, intermittent gauge readings or a blank display are often caused by poor contacts, corroded connectors or damaged wiring.
• Moisture and Corrosion: Water ingress or condensation can corrode PCB traces and connectors, leading to erratic behaviour or total failure.
• Solder Joint Fatigue: Thermal cycling over years can cause micro-cracks in solder joints on the circuit board, producing intermittent faults.
• Power Surges and Battery Events: Voltage spikes or improper battery disconnection during programming can damage internal electronics or corrupt stored settings.

Who Should Buy This Part

Recommended for professional auto technicians and experienced DIYers who need an OEM instrument cluster for Citroën C8 or Peugeot 807 vehicles. Useful when replacing non-functional gauges, restoring navigation display, or addressing intermittent dashboard failures.

Practical Tips

• Keep the removed unit and screws organized to avoid fitment issues during reassembly.
• Inspect connectors and harnesses for corrosion and repair any damaged wiring before fitting the new cluster.
• Test all functions with the engine running and ignition on; check backlight, gauge sweep, warning lamps and NAVI screen.

This replacement display module is intended for mechanics and experienced DIY enthusiasts who service Stellantis vehicles. The unit handles radio information and the on-board computer display functions—showing station and media data, trip information and menu prompts—and communicates with the vehicle via the CAN network. Many buyers search by part number (e.g. 9658083380) when looking for this component, so the listed codes below will help you find the exact match.

Technical Information

• Manufacturer: Stellantis
• Model: Citroën C8 (2007); Compatible With: Peugeot 807, Peugeot 307, Peugeot 207 (as indicated)
• Product Codes: 9658083380, 9658083380-02
• Other Numbers: 9821852480, 659330, 659331

Function And Features

The unit serves as the radio display and on-board computer interface. It displays audio sources, station and track information, vehicle messages and basic trip/computer readouts. It requires proper connection to the vehicle wiring harness and data bus to operate. Some vehicle functions controlled through this display may remain disabled until the module is initialized or programmed with diagnostic equipment.

Installation Recommendations

• Disconnect The Negative Battery Terminal Before Work To Prevent Short Circuits And Data Corruption.
• Remove Interior Trim Panels Carefully To Access The Radio/Display Module; Use Suitable Trim Tools To Avoid Damage.
• Note Electrical Connector Locations And Unlock Latches Before Pulling Connectors; Do Not Force Pins.
• Handle The Display Module With ESD Precautions And Avoid Touching Circuitry Or Flat Cables Directly.
• After Mechanical Installation Reconnect The Battery And Verify Power And Backlight; Check Fuses Related To Radio/Instrument Circuitry If Unit Has No Power.
• Perform Diagnostic Programming/Initialization If Required—Some Functions May Need To Be Enabled Via A Dealer Or Aftermarket Diagnostic Tool.
• Test All Displayed Functions, Radio Reception, Steering Wheel Controls And On-Board Computer Menus Before Final Reassembly.

Common Failure Causes

• Heat And Age: Internal Components Such As Solder Joints Or Capacitors Can Degrade Over Time, Causing Intermittent Or Permanent Failures.
• Moisture Or Corrosion: Water Ingress Or Corroded Connectors Can Cause Display Malfunctions Or Loss Of Communication On The Data Bus.
• Power Surges Or Poor Grounding: Voltage Spikes And Bad Grounds May Damage Electronics Or Corrupt Software.
• Software Or Communication Errors: Corrupted Software Or Faulty CAN Bus Communication Can Prevent Proper Operation Until Reprogrammed.
• Mechanical Damage: Impact Or Improper Removal Can Break Connectors, Mounts Or Internal Flex Cables.

Search Tips: Use the part numbers 9658083380, 9658083380-02, 9821852480, 659330 or 659331 when searching to find matching units quickly. If the vehicle requires activation of functions after replacement, plan for diagnostic time during the job.

This description is intended to give a clear technical overview for replacement and servicing. Always follow vehicle-specific service manuals and safety procedures when working on electrical systems.

Often identified by product codes 1497566080, 6105XP, and 610326, this display replaces the original equipment, ensuring accuracy and compatibility with the vehicle’s electronic systems. It is suitable for vehicles where the current display has failed or shows inconsistent readings.

Technical Information:
Manufacturer: Magneti Marelli
Model: Citroën C8, Peugeot 807
Product Codes: 1497566080, 6105XP, 610326
Additional Numbers: These parts are specifically targeted at Citroën and Peugeot vehicles, predominantly models C8 and 807, ensuring maximum compatibility and efficiency.

This replacement display is a cost-effective solution for restoring accurate mileage and vehicle status feedback without investing in brand-new parts. Installation is straightforward and can be performed by professional mechanics or experienced DIY enthusiasts, making it accessible for a wide range of users.

Common reasons for replacing this display include faulty mileage readings, malfunctioning warning indicators, or general wear affecting the display’s visibility and responsiveness. Maintaining a fully operational display contributes to vehicle safety and timely maintenance reminders.

Whether you are a professional mechanic or a car enthusiast performing self-repairs, this Magneti Marelli display ensures reliability and long-term functionality. Restore your Citroën C8 or Peugeot 807’s dashboard visibility today with this quality component.

Order now to guarantee sustained vehicle safety and comfort!

This display module restores radio and onboard computer readouts and menus for Peugeot 807 and Citroën C8 vehicles. It is a direct-fit replacement for factory dashboard displays and is commonly searched by part numbers, so entering codes like 9665989780, 9665989780-01, 9821852480, 6593T6 or 6593T7 will help you find the correct unit. Designed for professional fitters and experienced DIY mechanics, the unit displays radio information, trip computer data and system messages clearly and reliably when properly installed and configured.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 807, Citroën C8 (From 2005)
• Product Codes: 9665989780-01; 9665989780; 9821852480
• Other Numbers: 6593T6; 6593T7; SW V71.3; HW V1503

Function And Application

The unit provides the visual interface for the radio and vehicle onboard computer: station and media info, clock, trip computer readouts, warning messages and simple menu navigation. It is intended for vehicle dashboards where the factory display has failed, is dim, shows corrupted graphics, or no longer responds. Software Version SW V71.3 and Hardware Version HW V1503 correspond to the firmware/hardware identifiers printed on compatible units.

Installation And Recommendations

• Disconnect the vehicle battery before starting work to avoid short circuits and to protect electronic modules.
• Remove surrounding trim and unscrew the head unit following manufacturer procedures to access the display connector. Handle flat-flex cables and connectors carefully to avoid damage.
• Check connector pins and harness for corrosion or bent pins before fitting the replacement. Clean contacts if necessary.
• After mechanical installation, Some Functions May Need To Be Configured To The Vehicle With Diagnostic Equipment; use PSA diagnostic tools (DiagBox/Lexia) for parameter adaptation if required.
• Secure the unit and reassemble trim. Reconnect the battery and verify operation of radio, clock and trip computer functions.

Replacement Procedure

1. Park vehicle on level ground, engage parking brake and remove ignition key.
2. Disconnect negative battery terminal.
3. Remove dashboard trim panels to access the head unit and display.
4. Unplug display connectors and carefully detach any ribbon cables.
5. Fit the new display, reconnect cables, and reassemble panels.
6. Reconnect battery and perform a functional check. If menus or features are missing, perform diagnostic configuration with PSA tools.

Why This Part Most Often Fails

• Age-Related Component Wear: Backlight units, LCD layers or internal capacitors can degrade over time and cause dimming, lines, or full failure.
• Thermal Stress: Heat cycles in the dashboard can accelerate solder joint cracks or component failure on the display board.
• Connector Issues: Loose, corroded or damaged ribbon cables and harness connectors lead to intermittent or total loss of display data.
• Software/Configuration Faults: Incorrect or corrupted software and configuration data can make features unavailable until the unit is adapted with diagnostic equipment.
• Moisture Ingress Or Impact Damage: Water penetration or shocks from collisions can damage the display electronics.

Who Should Install

Recommended For Professional Fitters And Experienced DIY Mechanics. If diagnostic adaptation is required, use of PSA Service Tools (DiagBox/Lexia) is advised to ensure full functionality.

Notes

Part numbers And Software/Hardware Identifiers Are Included To Help You Match The Correct Unit. Search By 9665989780, 9665989780-01, 9821852480, 6593T6 Or 6593T7 For Fast Identification.

Product Overview

High-quality instrument display unit manufactured by Magneti Marelli, designed to show total mileage and a range of vehicle status indicators for Citroën C8 and Peugeot 807 models. The module includes the odometer readout and multiple warning lights that inform the driver about engine status, ABS, airbags, lights, and other monitored systems. This unit was removed from a donor vehicle with a recorded mileage of 211,453 km.

Why Choose This Unit

This original equipment display is suitable for mechanics and experienced DIYers looking for a direct replacement part. It preserves the original interface and wiring layout, avoiding aftermarket compatibility issues. Many customers search by product number, so the unit’s reference codes are stated in the Technical Information section for quick identification.

Installation Recommendations

• Disconnect the battery before starting work to avoid short circuits and to protect the electronics.
• Remove the trim panels surrounding the instrument cluster using appropriate trim tools to prevent damage to plastic clips.
• Unscrew the cluster retaining screws and carefully pull the unit forward to access the wiring connectors.
• Release the locking tabs on the multi-pin connectors and remove the unit. Handle the display by its housing—avoid pressing the lens or LCD surface.
• Fit the replacement unit by reversing the removal steps. Reconnect the battery and verify all instrument functions, warning lights, backlighting and odometer display.
• If any warning lights remain or some functions do not respond, perform a full systems scan with appropriate diagnostic equipment to identify related faults.

Most Common Cause Of Failure

• LCD Segment Failure or Pixel Burn: Over time segments can dim or fail due to aging of the display or thermal stress.
• Backlight Degradation: Dim or flickering backlight caused by failed LEDs or aging components.
• Corroded Or Loose Connectors: Poor electrical contact from moisture ingress or vibration leading to intermittent operation.
• Failed Solder Joints Or Electronic Components: Thermal cycling can crack solder joints or cause capacitor/resistor failures on the display PCB.
• Water Damage Or Overvoltage Events: Exposure to moisture or voltage spikes can permanently damage the module.

Practical Notes For Fitment

Instrument clusters are generally a direct mechanical fit, but after installation you should verify that all warning lamps illuminate during the key-on self-test and that the odometer is displayed correctly. No additional body control unit pairing is normally required for the display itself, however any linked functions (such as illumination intensity via Body Control modules) should be checked with a diagnostic tool if they behave unexpectedly.

Technical Information

• Manufacturer: Magneti Marelli
• Model: Display For Citroën C8 / Peugeot 807
• Product Codes: 1496286080
• Additional Numbers: 610578, 211000, 211453, NFP

Additional Advice

Protect the unit from electrostatic discharge and avoid working on it with wet hands. If you encounter intermittent faults after installation, inspect connector pins for deformation or corrosion and re-seat connectors. For thorough diagnostics of related vehicle systems, use manufacturer-grade diagnostic equipment to read fault codes and live data.

This display is known to be a crucial component in maintaining your vehicle’s performance. Frequent issues arise from wear and tear due to environmental factors, electrical faults, or mechanical stress. Replacing your display at the right time can prevent further damage and extend the lifespan of other dashboard components.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: C8, 807
• Product Codes: 1488702080, 1496286080
• Additional Numbers: 610578

This Display is compatible with the following models: Citroën C8 and Peugeot 807, utilizing part numbers 1488702080, 1496286080, and 610578. The part is engineered to last and withstand the rigors of daily driving, making it a necessary addition to your vehicle’s maintenance.

The replacement process is straightforward, making it an ideal choice for both professional mechanics and car enthusiasts who prefer to tackle repairs themselves. It is important to replace a malfunctioning display, as a faulty unit can lead to inaccurate readings, which could compromise your driving experience and safety.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C8, Peugeot 807
• Product Codes: 1488702080, 1496286080, 610578
• Other Numbers: Not applicable

The radio display presents vital data for managing your vehicle’s multimedia system and navigation. Its proper operation is crucial for seamless control of entertainment and information functions. Installation may require activation of some features through diagnostic tools to match your vehicle’s specific configuration, ensuring full compatibility and performance.

Technical Information:

• Manufacturer: SAGEM
• Model: Citroën C8, Peugeot 807
• Product Codes: 1495481077 C00, 1495869077 D00, 6155T9, 6155T8
• Additional Numbers: NFP

This display is in good condition and ready for installation. Confirm that the product code matches your vehicle’s required part number to guarantee optimal fitment and function. It represents a valuable solution for professional mechanics and car enthusiasts performing maintenance or repairs.

Frequent issues that necessitate replacing the radio computer display include screen malfunctions, loss of backlight, or erratic information display, which can affect your vehicle’s multimedia usability. Regular wear and tear or electrical faults often cause these problems over time.

By choosing this SAGEM display, you not only reduce repair costs but also contribute to a sustainable approach by utilizing reliable components designed specifically for your vehicle’s needs. Expect dependable long-term performance and restored convenience in your driving experience.

Order this essential radio computer display for your Citroën C8 or Peugeot 807 now and enhance your vehicle’s multimedia interface and control.

Technical Information:

• Manufacturer: SAGEM
• Model: Citroën C8, Peugeot 807
• Product Codes: 1495481077 C00
• Other Numbers: 1495869077 D00, 6155T9, 6155T8 NFP

This display is ideal for replacing the original damaged or non-functional part, and its installation may require diagnostic equipment to activate certain features, ensuring full functionality in your vehicle. By using this OEM part, you will restore the original performance and comfort of the vehicle’s media system as you are accustomed to.

Upgrading your vehicle with this display will not only enhance its functionality but also help maintain its internal technological systems in good condition. Replacing the old, damaged, or non-functional radio and computer display with a new one is key to preserving your vehicle’s value and ensuring trouble-free operation on the road.

This Magneti Marelli display is designed specifically for Citroën C8 and Peugeot 807 models, providing reliable odometer readings and vehicle status indicators. It comes from a vehicle with 304600 km mileage, offering a cost-effective and dependable replacement option for mechanics and DIY enthusiasts.

Features and Application

The display accurately shows the distance traveled and essential vehicle status signals, making it crucial for maintaining full awareness of your car’s condition. Installation is straightforward as the unit is designed to seamlessly replace the original equipment without compatibility issues. This helps to avoid installation difficulties and ensures proper functionality immediately after fitting.

Why This Part Is Needed

Odometer displays may suffer from wear or electronic failures over time, especially in higher mileage vehicles. This can lead to inaccurate readings or loss of important indicators, affecting vehicle diagnostics and legal compliance. Replacing the display restores accurate mileage tracking and operational status lights, essential for safe and legal vehicle operation.

Technical Information

• Manufacturer: Magneti Marelli
• Model: Citroën C8, Peugeot 807
• Product Codes: 1401133480, 610326
• Additional Numbers: From a vehicle with 304600 km mileage

Who Should Use This Part

This component is ideal for professional auto mechanics working on Citroën and Peugeot vehicles as well as car owners who perform their own repairs and maintenance. It guarantees reliable performance while keeping repair costs reasonable.

Additional Information

If you require further assistance or are searching for other parts compatible with Citroën or Peugeot models, do not hesitate to contact us. We offer a broad portfolio of automotive components tailored to your vehicle’s needs.