This direct-fit display unit is intended for Peugeot 308 T7 vehicles and serves as the visual interface for the radio and the on-board computer. Designed for professional workshops and experienced DIY mechanics, the unit restores clear screen readout, menu navigation and status information for infotainment and driver information systems. Replacing a faulty display can revive the vehicle’s user interface, improve diagnostics feedback and eliminate intermittent blank screens or corrupted characters that interfere with everyday use.

Key Features And Benefits

• Compatible With Factory Dash Layout: Fits The Peugeot 308 T7 Instrument Panel Without Major Modifications.
• OEM Part Numbers Included: Helps Fast Identification When Searching By Code.
• Restores Full Menu Visibility: Improves Usability Of Radio, Trip Computer And Vehicle Settings.
• Suitable For Workshops And Skilled DIYers: Clear Instructions For Removal And Installation Provided Below.

Technical Information

• Manufacturer: Stellantis / Peugeot-Citroën
• Model: Peugeot 308 (T7)
• Product Codes: 966631380, 966631380-02, 9821851780
• Other Numbers: 6593P2, 6593P3

Installation Recommendations

• Always Disconnect The Battery Before Starting Work To Prevent Short Circuits And Protect Sensitive Electronics.
• Remove Trim Panels Carefully Using Plastic Trim Tools To Avoid Damage To Clips And Surrounds.
• Unscrew And Slide Out The Radio/Head Unit, Then Disconnect Electrical Connectors And Ribbon Cables Gently—Avoid Pulling On Wires.
• Inspect Connectors For Corrosion Or Bent Pins; Clean Contacts If Necessary Before Installing The New Display.
• After Installation, Power Up The Vehicle And Check All Display Functions. Some Features May Require Diagnostic Activation Or Software Settings To Be Enabled.

How To Replace The Display (Step-By-Step)

• Park On A Level Surface, Switch Off Ignition And Disconnect The Negative Battery Terminal.
• Use Trim Removal Tools To Remove Surrounding Dashboard Panels.
• Unscrew Fasteners Securing The Radio/Cluster, Slide The Unit Forward And Disconnect The Multiway Connectors And Display Ribbon Cable.
• Remove The Old Display Module From The Radio Housing And Fit The Replacement, Ensuring The Ribbon Cable Is Seated Correctly.
• Reinstall The Head Unit, Reconnect All Plugs, Refit Trim Panels And Reconnect The Battery.
• Verify Display Operation And Menu Access. If Certain Functions Do Not Appear, Use Diagnostic Equipment To Enable Required Options.

Why This Part Fails Most Often

• Backlight Or LCD Degradation: Over Time Heat And UV Exposure Can Cause Dimming, Dead Pixels Or Uneven Lighting.
• Ribbon Cable Fatigue Or Connector Issues: Repeated Vibration And Poor Contact Can Create Intermittent Or Permanent Failure.
• Moisture Ingress And Corrosion: Leaks Or High Humidity Can Corrode Contacts And Electronics.
• Software/Compatibility Issues: After Replacement Some Functions May Be Disabled Until Activated By Diagnostic Tools.

If You Search By Part Number, Use The Codes Listed Above To Quickly Find The Correct Unit. This Display Is A Direct Replacement For Units Marked With The Included Product Codes And Is Intended For Technicians Comfortable With Dashboard Electronics And Diagnostic Activation Procedures.

Product Overview

This replacement display unit is designed for Citroën and Peugeot vehicles and serves as the visual interface for the radio and on-board computer. It reproduces radio station information, menu screens, trip computer readouts and controlled settings. The unit is a direct-match electronic module commonly searched by part numbers such as 9666483680-00, 9821851780, 6593H7 and 6593H8, making it easy to find for professional workshops and DIY mechanics.

Benefits

• Restores clear, legible display for radio and trip computer functions.
• Direct-fit product that replaces faulty or dark screens caused by backlight or connector faults.
• Improves usability of infotainment and instrument menus for everyday driving and diagnostics.

Technical Information

• Manufacturer: Stellantis
• Model(s): Peugeot 207, Peugeot 308 (Also Compatible With Selected Citroën And Peugeot Models)
• Product Codes: 9666483680-00, 9821851780
• Other Numbers: 6593H7, 6593H8

Compatibility And Notes

The display is commonly fitted to earlier-generation Peugeot 207 and 308 platforms and to equivalent Stellantis electrical architectures. Some features or menu items may require activation or enabling via diagnostic equipment to function exactly as the original unit did. Check that the connector layout and housing match your vehicle before installation.

How The Unit Is Replaced

Replacement is straightforward for a trained technician or an experienced DIYer with basic tools. Typical steps:

• Disconnect the negative battery terminal before you start to avoid short circuits and protect vehicle electronics.
• Remove surrounding trim panels carefully to access the radio/display area—use plastic trim tools to avoid damage.
• Unscrew and extract the radio/head unit to reach the display module if it is mounted separately.
• Disconnect the display electrical connectors (pay attention to ribbon cables and locking clips).
• Install the new display, reconnect all plugs, test functionality before reassembling trim.
• After installation, reassemble trim and reconnect the battery. Perform any required diagnostic enabling if certain functions are not active.

Installation Recommendation

Always disconnect the battery prior to removal and follow manufacturer procedures to prevent damage to sensitive electronics. Handle the display and ribbon cables gently, observe electrostatic discharge (ESD) precautions, and use correct torque settings for screws. If certain features are inactive after fitment, use PSA-compatible diagnostic tools (e.g., DiagBox/Lexia) to enable or code functions.

Why This Part Fails Most Often

Display failures are usually caused by age and environmental factors. The most common issues are backlight burnout, failing solder joints or cracked solder traces from thermal cycling, damaged ribbon cables or connector pins, and moisture ingress leading to corrosion. Sudden screen loss can also result from intermittent power supply faults or internal component degradation after many years of use.

Advice For Workshops And DIY Mechanics

Search by the part numbers 9666483680-00, 9821851780, 6593H7 or 6593H8 to locate the correct unit quickly. When replacing the display, inspect connectors and wiring for signs of corrosion or damage—repairing a corroded connector can prevent repeat failures. If diagnostic activation is required, use appropriate PSA diagnostic software to enable all functions and confirm proper operation.

Overview

This replacement radio and on-board computer display is intended for first-generation Peugeot models listed above and carries the OE reference numbers often used by workshops and DIY mechanics. The unit presents infotainment menus, radio information and trip computer readouts (fuel consumption, range, trip distance and basic vehicle settings). Because some features are managed by vehicle software, certain functions may require activation with a diagnostic tool after installation.

Why Choose This Unit

• Direct fit for compatible Peugeot 308 T7 / 3008 T84 / 5008 T87 dashboards.
• Common OE product codes included for fast lookup (9678491880 / 9678491880-01 / 9821851780).
• Suitable For Mechanics And Experienced DIYers Looking To Restore Full Display Functionality.

Installation Guide

Basic replacement steps for a competent mechanic or experienced DIYer:

• Disconnect Battery: Always disconnect the negative terminal before starting work to avoid electrical damage and airbag deployment risks.
• Remove Trim Panels: Carefully pry off surrounding trim using appropriate trim tools to avoid breaking clips.
• Unscrew Retaining Screws: Remove screws securing the head unit/display assembly and pull the unit forward gently.
• Disconnect Connectors: Unplug all electrical connectors and ribbon cables with care; note connector positions for reassembly.
• Swap The Display: Replace the display assembly, reconnect all plugs and secure with the original screws.
• Reassemble And Test: Refit trim, reconnect the battery and verify basic functions. If some menus or vehicle-related functions are missing, diagnostic activation may be required.

Mounting Recommendations

• Perform Installation In A Clean, Static-Safe Environment.
• Use Correct Trim Tools To Prevent Breakage Of Clips And Bezels.
• Handle Ribbon Cables And Connectors Gently To Avoid Pin Damage.
• If Diagnostic Activation Is Required, Use A Compatible PSA Diagnostic Tool Or Ask A Professional Workshop.

Common Failure Causes

Display units typically fail due to a combination of mechanical, electrical and environmental factors. The most frequent causes are:

• Backlight Or LED Failure Leading To Dim Or Dark Screen.
• Damaged Ribbon Cable Or Connector Causing Intermittent Or No Image.
• Internal Solder Joint Cracks From Thermal Cycling And Vibration.
• Water Ingress Or Condensation Causing Corrosion Of Electronic Components.
• Software Or Configuration Issues Where Certain Features Are Disabled Until Enabled By Diagnostic.

Lifespan Varies With Use And Environment; Failures Often Appear After Several Years Of Service.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 308 T7; Peugeot 3008 T84; Peugeot 5008 T87
• Product Codes: 9678491880; 9678491880-01; 9821851780
• Other Numbers: Listed OE References And Common Workshop Tags Used For Lookup

Final Notes

This display is aimed at professional garages and competent self-repairers. Keep in mind that while mechanical replacement is straightforward for experienced technicians, activation of vehicle-specific features may require a PSA-compatible diagnostic device to restore full functionality after installation.

Original multifunctional radio and on-board computer display for Peugeot 308 I (T7). The ideal replacement for a cracked, faded or “burnt” center display. Thanks to the OEM design, full compatibility with the car’s electronics and correct display of radio and on-board computer functions is maintained.

Key benefits
– Original PSA part – a reliable replacement without compromises
– Fully compatible with Peugeot 308 I (T7) according to part number and equipment
– Displays radio, on-board computer, date/time and other functions depending on the car’s equipment
– Quick installation in the upper part of the dashboard instead of the original display

OEM numbers (mutually interchangeable depending on equipment)
– 9676655380
– 1607240280
– 1607240480
– 9821851780

Compatibility
– Peugeot 308 I (T7) 2007–2013/2014: hatchback, SW and CC
– For RD4 / RD45 radios (depending on car configuration)
– Before ordering, always compare the part number on your original display and the connector according to the photo

Technical information
– Part type: center multifunction display (MFD) – “radio / on-board computer display”
– Functions: RDS/station display, on-board computer (consumption, range), date/time, outside temperature; possibly other vehicle functions depending on the equipment (e.g. parking assistant, vehicle settings)
– Communication: via BSI/radio via CAN bus (depending on the car version)
– Connector: 1x multi-pin PSA connector (verify match according to photo and part number)
– Mounting: original position in the upper part of the dashboard (piece-for-piece exchange)
– Display design: monochrome display (backlight depending on the specific version)

Coding and assembly
– After installation, initialization/telecoding in diagnostics (DiagBox/PP2000) may be necessary – setting of language, units, date/time, radio type, etc.
– When replacing with another type of display or when switching from RD4 ↔ RD45, telecoding is necessary

Condition and packaging
– Used original part from disassembly
– We supply the display itself without the radio and other accessories (unless otherwise indicated in the photos)
– Normal cosmetic signs of use do not affect function

How to choose correctly
– The fastest way is to follow the OEM number from your original part (see label)
– Compare the connector and the shape of the display body according to the photos
– In case of confusion, state the VIN – we will verify the correct compatibility

Search/SEO
– Peugeot 308 radio display, center display, MFD multifunction display, on-board computer 308 T7, RD4 RD45, 9676655380, 1607240280, 1607240480, 9821851780

Note: Some functions may need to be activated in diagnostics after installation. Always compare the part number and connector photo with your car before ordering.

Upgrade your vehicle with the Citroën Peugeot Radio Computer Display, designed specifically for Peugeot 308 models. This crucial electronic component offers a user-friendly interface for managing your multimedia system, navigation, and various vehicle functions. Being an original part, it guarantees full compatibility and efficient performance.

Some functions of the display may require activation through specialized diagnostic software, allowing complete customization to meet your specific needs and preferences. Originating directly from Citroën and Peugeot vehicles, this display ensures quality and long-term reliability.

Technical Information

Manufacturer: PSA Citroën Peugeot
Model: Peugeot 308
Product Codes: 9665989780, 9821852480, 6593E6, 6593E7
Additional Numbers: 6593E6, 6593E7

The unit has been professionally removed and checked for functionality prior to sale. This original used auto part represents an economical and environmentally friendly choice that supports sustainability by extending the life of existing components. Ensure your Peugeot 308 maintains full functionality and comfort with this essential replacement part.

Various diagnostic procedures can be applied to activate specific functions, significantly enhancing user comfort. We offer this part with confidence in its lasting value and reliability.

As a critical part of the electronic systems in your car, the radio display can face wear over time due to frequent use and exposure to heat and moisture. If you notice flickering displays or unresponsive touch screens, it may be time to replace the display. Regular checks and replacements can help maintain the overall functionality of your audio systems.

Technical Information

• Manufacturer: PSA
• Model: Peugeot 308
• Product Codes: 9803399680, 9821851780
• Other Numbers: 9678491880

This component is specifically designed for the Peugeot 308 models, making it a reliable replacement part for various repairs. Mechanics and car enthusiasts often seek this part under product numbers 9675859580 and 1607240280. The Radio Computer Display typically needs replacing due to wear and tear over time, as exposure to sunlight and temperature fluctuations can affect its performance.

Technical Information

• Manufacturer: PSA
• Model: Peugeot 308
• Product Codes: 9675859580, 1607240280
• Other Numbers: 1607240480, 9821851780

The display provides the primary visual interface for the vehicle’s multimedia and radio computer system, presenting audio settings, system menus and navigation prompts where supported by the head unit. It connects to the head unit via the original wiring harness and must be installed with correct alignment to ensure full electrical and mechanical integration.

Technical Information:

• Manufacturer: Citroën, Peugeot
• Model: Suitable For Peugeot 308
• Product Codes: 9666136680, 9807307080, 6593F4, 6593F5, 659399, 6593A0, 9822637880
• Additional Numbers: 9666136680-01

&ltstrong>Compatibility: Primarily fitted on Peugeot 308 models; may also fit certain Citroën vehicles that share the same head unit platform. Always verify compatibility by checking OEM part numbers or providing your VIN before purchase.

&ltstrong>Installation: Typical replacement steps include removal of the dashboard fascia trim, unscrewing the radio or head unit mounting bolts, carefully disconnecting the display connector and ribbon cable, installing the replacement display, reconnecting all harnesses and reassembling the trim. Procedures can vary by model year and trim; consult a repair manual or professional technician if unsure.

&ltstrong>Common Causes Of Failure: Displays commonly fail due to backlight or LCD degradation, damaged ribbon cables or connectors, moisture ingress, or cracked solder joints. Proper handling during removal and installation helps minimise risk of additional damage.

&ltstrong>Fitment Advice & Support: To confirm exact fitment, provide the existing part number or your vehicle VIN. Our technical department can assist with compatibility checks and installation guidance.

Restore full functionality and a neat appearance to your vehicle’s multimedia system with this reliable used radio computer display for Peugeot and Citroën. Order now for prompt dispatch and clear part identification using the OEM numbers listed above.