This replacement display is designed for the radio and onboard computer of the Peugeot 307 (first generation). Frequently searched under reference numbers 9646652577, OR00 or 6564FA, it is ideal for professional workshops and DIY mechanics looking for a direct-fit unit to restore clear readout and onboard information functions. The unit arrives with intact housing and connectors and is ready for installation and testing.

Technical Information

• Manufacturer: Stellantis (Peugeot/Citroën)
• Model: Peugeot 307 (First Generation)
• Product Codes: 9646652577, OR00, 6564FA
• Other Numbers: 6564FA, 9646652577

Fitment And Replacement

Application: Radio and onboard computer display for Peugeot 307 first series. The display is typically mounted in the radio/dashboard bezel and connected via one or more connectors or ribbon cables.

• Disconnect the battery before starting work.
• Remove the trim around the radio using proper trim tools to avoid breaking clips.
• Unscrew the radio/module fasteners and carefully slide the unit out of the dash.
• Unlock and disconnect the display connector(s) or ribbon cable(s); note connector locks and orientation.
• Install the replacement display, reconnect connectors, test functionality, then reassemble the unit into the dash.

Installation Recommendations

• Always Disconnect The Battery Before Removal To Prevent Short Circuits And Preserve Vehicle Electronics.
• Use Non-Marring Trim Tools To Protect Dashboard Surfaces And Clips.
• Handle The Display By The Housing; Avoid Touching Connector Pins Or PCB Traces.
• Protect Against Electrostatic Discharge When Handling Internal Electronics.
• Inspect And Clean Connectors If Corrosion Or Dirt Is Present; Test The Unit Before Final Reassembly.

Common Failure Causes

• Backlight Or LED Driver Failure Causing Dim Or Blank Screen — One Of The Most Frequent Issues.
• Damaged Or Worn Ribbon Cables And Connector Pins Due To Vibration Or Improper Removal.
• Solder Joint Cracks On The Display PCB From Thermal Cycling And Age.
• Moisture Ingress Or Corrosion Of Contacts In Vehicles Exposed To Humid Conditions.
• Physical Impact Or Heat Damage From Dashboard Exposure Over Time.

Search Terms: Peugeot 307 display, 9646652577 display, 6564FA display, OR00 display, radio display Peugeot 307.

Product Overview

This original-equipment display is designed for Peugeot 307 dashboards and provides clear visualization of radio, navigation, on-board computer and other vehicle functions. It is a direct replacement on vehicles equipped with the factory multimedia/navigation system and helps restore full in-dash functionality without major modifications.

Key Features

• Clear LCD Display For Radio, Navigation And Trip Computer Data
• Direct Fit For Peugeot 307 Vehicles Equipped With Factory Infotainment
• OEM Part Numbers Included For Easy Identification
• Ideal For Mechanics And DIY Enthusiasts Seeking A Reliable Dashboard Replacement

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 307
• Product Codes: 9663321880, 6563YN, 6563YP
• Other Numbers: 6563YN | 6563YP | 9663321880

Compatibility

Suitable For Peugeot 307 models equipped with the original factory navigation/radio interface. Before ordering, check that the part numbers match the unit currently fitted in the vehicle to ensure correct fitment and connector layout.

Installation Guide

1. Prepare Tools: Trim Removal Tools, Torx And Phillips Screwdrivers, Gloves.
2. Disconnect Battery: Always Disconnect The Negative Battery Terminal Before Starting Work.
3. Remove Dashboard Trim: Use Trim Tools To Carefully Pry Surrounding Panels Without Damaging Clips.
4. Unscrew Unit: Remove Fasteners Securing The Display Module And Gently Pull Unit Forward.
5. Disconnect Connectors: Unplug The Multi-Pin Harnesses And Any Antenna Or Auxiliary Cables.
6. Fit Replacement: Connect Harnesses To New Display, Secure With Screws, Reinstall Trim And Reconnect Battery.
7. Functional Check: Verify Radio, Navigation, Display Backlight And On-Board Computer Readouts Operate Correctly After Installation.

Mounting Recommendations

• Follow Vehicle Manufacturer Procedures For Removal And Installation To Avoid Damage To Connectors And Trim.
• Use Proper Trim Tools To Prevent Scratches And Broken Clips.
• When Reconnecting, Ensure Connectors Are Fully Seated And Locking Tabs Engaged.
• Perform A Full Functional Test Before Final Reassembly.
• Keep Screws And Small Parts Organized To Prevent Rattles After Reinstallation.

Why The Part Commonly Fails

Display Units In Vehicles Of This Age Typically Fail Due To Backlight Or LCD Degradation, Thermal Stress, Connector Corrosion, Or Power Supply Component Wear (e.g., Aging Capacitors). Frequent Causes Include Prolonged Exposure To Heat, Intermittent Voltage Spikes, Moisture Ingress Behind The Dashboard, And Mechanical Shock From Improper Removal. Failure Symptoms Often Include Dim Or Blank Screen, Flickering, Partial Pixel Loss, Or Loss Of Certain Functions Displayed On Screen.

Useful Notes

Because This Unit Interacts Directly With The Vehicle’s Infotainment Systems, Make Sure Connectors Match The Original Unit And That All Functions Are Verified After Installation. Typical Vehicle Electrical System Rating Is 12V; Exercise Caution When Working Around Airbag And Safety Circuits.

Buying Advice

Search By The OEM Part Numbers (9663321880, 6563YN, 6563YP) When Looking For This Display To Improve The Chance Of Finding The Correct Fit. This Product Is Intended For Mechanics And Experienced DIYers Comfortable With Dashboard Disassembly.

If you are looking for a dependable replacement display for your Peugeot 307, this genuine unit identified by part numbers 9640963777 C00 and 6564FA is an excellent choice. Originating from PSA Citroen Peugeot vehicles, it ensures perfect compatibility and restores full functionality to your radio computer display system.

Designed specifically for Peugeot 307 I and 307 II models, this display plays a vital role by accurately presenting essential driving information and enhancing overall user comfort during vehicle operation. Proper functioning of the display is crucial for monitoring and controlling in-car systems efficiently.

Replacing this part is a straightforward process achievable by any well-equipped auto mechanic or experienced DIY car enthusiast. Ensuring the correct part number match guarantees seamless integration with your vehicle’s electronic system.

Technical Information

• Manufacturer: PSA Citroen Peugeot
• Model: Peugeot 307
• Product Codes: 9640963777 C00, 6564FA
• Additional Numbers: N/A

Using this original replacement display helps maintain the integrity of your vehicle’s radio computer and supports reliable vehicle operation. This part is a cost-effective option for restoring your Peugeot 307’s display functionality without purchasing an expensive new component.

Upgrade your vehicle today with this essential display and enjoy improved information clarity and driving convenience on every trip.

This multifunction display is an ideal replacement for workshops and DIY enthusiasts working on Peugeot 307 models from 2005. It clearly presents radio and navigation data, trip computer readouts and vehicle subsystem information on a single screen, improving diagnostics and daily driving comfort. The unit is often searched by part numbers 9661235580, 659377 and 6593S9, so adding these codes to your search will speed up finding the correct item.

Compatibility And Application

Designed For Peugeot 307 vehicles (from 2005) equipped with the factory infotainment cluster. Suitable For mechanics and experienced DIYers replacing dashboard displays or upgrading a faulty unit. Commonly used to restore full functionality of radio, sat-nav display, onboard computer and suspension/vehicle status readouts.

How It Is Replaced

Replacement is straightforward for a trained technician: disconnect the battery, remove surrounding trim with plastic trim tools, unscrew the center fascia or head unit mounting screws, carefully unplug the display connectors (including any ribbon cables) and swap the unit. Reconnect all plugs, test the display functions before full reassembly and then refit trim pieces. Typical replacement time: 30–60 minutes depending on experience and trim complexity.

Installation Recommendations

• Always Disconnect The Battery Before Starting Work To Avoid Short Circuits And Errors.
• Use Plastic Trim Tools To Avoid Damaging Dashboard Panels.
• Handle Ribbon Cables And Connectors Gently; Avoid Bending Or Twisting Connectors.
• Verify All Functions (Radio, Navigation, Trip Computer, Backlight) Before Final Reassembly.
• Protect The Unit From Static And Moisture During Installation.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Peugeot 307 (from 2005)
• Product Codes: 9661235580, 659377, 6593S9
• Other Numbers: 9661235580 | 659377 | 6593S9

Why This Part Fails Most Often

Display faults typically result from backlight degradation, delamination or damage to the LCD polarizer, connector wear or broken ribbon cables, and moisture ingress. Heat cycles and long-term UV exposure can also cause dark spots or loss of contrast. In many cases the unit remains readable but shows small marks or pixel defects—such defects are common failure signatures for age and environmental exposure.

Why Choose This Unit

This display restores full functionality of the Peugeot 307 infotainment and driver information systems, making it a practical option for workshop repairs or DIY restoration. Because it is commonly listed by OE numbers 9661235580, 659377 and 6593S9, you can quickly match it to service parts lists and online catalogs.

The Navigation Display for Peugeot 307 is a crucial component that enhances your driving experience by providing access to radio, navigation, on-board computer, and other vital functions of the vehicle.

Functionality

This display allows users to seamlessly interact with various vehicle features including the radio, navigation system, onboard computer, chassis status, and climate control. It ensures that all essential information is easily accessible, making it an essential part of your driving experience.

Replacement Information

Replacing the Navigation Display is a straightforward process for experienced mechanics and DIY enthusiasts. It requires basic tools and can typically be completed in under an hour. Regular checks are recommended to ensure the display functions correctly, as displays can fail over time due to electrical issues or physical damage.

Technical Information

• Manufacturer: Peugeot
• Model: 307
• Product Codes: 9659047580, 6563YN, 6563YP
• Additional Numbers: N/A

Conclusion

Upgrade your Peugeot 307 with this high-quality Navigation Display. It is designed to provide reliable performance and enhance your vehicle’s functionality.

This replacement radio and instrument display is intended for Peugeot 307 II models and provides a direct visual interface for radio, trip computer and vehicle information. The unit is commonly identified by original equipment numbers and is frequently searched by part number (see Technical Information below). Suitable for professional workshops and competent DIY mechanics, this display restores readable menus, backlight and information output when the factory screen has failed or deteriorated.

Function And Benefits

The unit displays radio information, clock, trip computer data and various vehicle messages. It restores clear text and symbols, consistent backlight and reliable communication with the vehicle CAN network. Replacing a faulty display improves usability of audio and driver information systems and eliminates intermittent message loss or blank screens that can affect diagnostics and everyday driving.

How Replacement Is Performed

• Prepare Tools: Trim removal tools, Torx and Phillips screwdrivers, socket set and a clean cloth.
• Disconnect Battery: Always disconnect the negative terminal of the battery before starting work to avoid short circuits and data corruption in vehicle modules.
• Remove Trim: Carefully pry off the central dash trims surrounding the radio/display using plastic removal tools to avoid damaging clips.
• Unscrew Unit: Remove fixation screws securing the radio/display assembly and pull the unit forward with caution.
• Unplug Connectors: Release electrical connectors and any ribbon cables. Note connector positions and locking tabs to ensure correct reassembly.
• Install New Unit: Connect the replacement display, secure the connectors and fasten the unit. Reinstall trim and reconnect the battery.
• Diagnostics And Activation: Some functions may require activation with appropriate diagnostic equipment to enable full feature set.

Installation Recommendations

• Perform Installation In A Dry, Static-Free Environment.
• Protect Trim And Panels With Tape Or Cloth To Prevent Scratches.
• Check Connector Pins For Corrosion Or Bent Contacts Before Reconnecting.
• After Reassembly, Verify All Functions (Backlight, Display Contrast, Inputs) And Clear Any Stored Fault Codes If Required.

Most Common Failure Reasons

• Age-Related Degradation: Backlight LEDs or CCFLs dim over time, making the screen hard to read.
• Thermal Stress And Solder Joint Fatigue: Repeated heating and cooling cycles can cause solder cracks leading to intermittent or total loss of display.
• Connector Wear Or Oxidation: Loose or corroded connectors cause communication errors or flickering.
• Moisture Ingress: Condensation or leaks can damage electronics and short circuits.
• Mechanical Damage: Impact during removal or from objects in the dash may damage the LCD or housing.

Technical Information

• Manufacturer: Stellantis (Peugeot / Citroën)
• Model: Peugeot 307 II (Display for vehicles from 2005)
• Product Codes: 9660468480, 9822637880
• Additional Numbers: 6155CC, 6155CE

Note: The display is commonly sought by its OE numbers listed above. Some features may only be enabled or calibrated via vehicle diagnostic tools. If diagnostic activation is necessary, use appropriate PSA service equipment to ensure full functionality.

How to Replace the Display Unit?

Since the display needs to be programmed to your vehicle, we recommend having this part replaced by a professional service.

When placing an order, you have the option to provide your VIN number, and we will check the compatibility of the part with your vehicle.

Technical Information

• Manufacturer: PSA CITROEN PEUGEOT
• Model: Peugeot 307
• Product Codes: 9661552780, 9659047580, 6563YN, 6563YP
• Additional Numbers: N/A

Technical Information:

• Manufacturer: PSA Citroën Peugeot
• Model: Peugeot 307
• Product Codes: 9652809977, D00, 6563W0, 6564FA
• Additional Numbers: 9660468480

This display unit is commonly replaced due to wear and tear from regular use, which can lead to fading, malfunctioning, or complete failure. Typically, it is advisable to replace the display if you notice any irregularities in audio output or display quality.

Replacement process is straightforward and can be carried out by auto mechanics or DIY enthusiasts. Ensure that you follow the specific instructions for your Peugeot 307 to guarantee a successful installation. Regular maintenance of your display will prolong its lifespan and enhance your vehicle’s overall audio experience.

Compatible with various PSA part numbers, including 96524732XT, 6155EG, 6155FN, and 6155FL, this radio display is an ideal replacement for worn-out or malfunctioning units.

Regular wear and tear can lead to display issues, making replacement necessary for optimal functionality. The installation process is straightforward, allowing both professionals and DIY enthusiasts to manage the replacement without hassle.

Technical Information

• Manufacturer: PSA
• Model: Peugeot 307
• Product Codes: 96524732XT, 6155EG
• Additional Numbers: 6155FN, 6155FL

When it comes to installation, replacing the old or malfunctioning display is straightforward. Typically, it requires simply removing the dashboard trim and disconnecting the old unit before securing the new display in place. Regular checks and timely replacements can significantly reduce the risk of failure due to wear and tear, which is common in electronic components due to heat and vibrations in the engine compartment.

This display serves the vital function of providing crucial information to the driver about the vehicle’s audio system, enhancing the overall driving experience. A malfunctioning display can lead to difficulties in accessing radio functions, which can be frustrating.

Technical Information

• Manufacturer: PSA CITROEN PEUGEOT
• Model: Peugeot 307
• Product Codes: 9650243077, 9652809977, 9640243077
• Additional Numbers: 653CE, 6563W0, 6564FA