High-Quality Replacement Display Intended For Peugeot 3008 I And 5008 I. This display presents radio information, Bluetooth/telephone prompts, trip computer data and vehicle messages. It is commonly searched by OEM numbers and aftermarket codes — include part numbers 9807427380, 9809842880 and related reference 9821851780 when looking for compatibility. The unit is suitable for technicians and experienced DIYers who maintain or repair first-generation Peugeot 3008 and 5008 vehicles.

Technical Information

• Manufacturer: Stellantis (Peugeot)
• Model: Peugeot 3008 I, Peugeot 5008 I
• Product Codes: 9807427380, 9809842880
• Other Numbers: 9821851780

Function And Benefits

The display is the central interface for infotainment and the on-board computer. It shows radio and media information, caller ID and phone menus when connected via Bluetooth, trip statistics (fuel consumption, range, average speed), warning messages and simple vehicle settings. A clear, correctly functioning display improves diagnostics speed and driver safety by making warnings and system messages visible.

Installation Recommendation

Recommended For Professional Installation Or Experienced DIYers. Typical Replacement Steps:

• Disconnect The Battery Before Starting Work To Avoid Short Circuits And Data Corruption.
• Remove Dashboard Trim Panels Carefully Using Trim Tools To Prevent Breakage.
• Unscrew Mounting Screws And Release The Display Module From The Dashboard.
• Disconnect Electrical Connectors And Any Ribbon Cables Gently; Inspect Connectors For Corrosion Or Bent Pins.
• Swap The Unit, Reconnect Cables Securely And Reassemble Panels.
• Power Up The Vehicle And Verify Display Functions. Some Functions May Need To Be Enabled Or Configured Using Diagnostic Equipment.

Handle The Display With Anti-Static Precautions, Avoid Excessive Force On Ribbon Cables And Ensure Connectors Are Fully Seated. Keep The Screen Protected From Scratches During Installation.

Why This Part Typically Fails

• Backlight Or LED Driver Failure Causing Dim Or Dark Screen.
• Partial Pixel Or Matrix Defects Resulting In Lines, Dead Pixels Or Flicker.
• Worn Or Damaged Ribbon Cable From Repeated Removal/Installation Or Flexing.
• Connector Corrosion Or Poor Contact Due To Moisture Ingress.
• Power Supply Issues And Voltage Spikes Damaging Internal Electronics.
• Software Or Configuration Lockouts Where Certain Features Remain Disabled Until Enabled By Diagnostics.

Additional Tips

• When Replacing The Display, Inspect The Surrounding Harness And Fuses To Rule Out Secondary Faults.
• If The Screen Powers But Some Menus Or Phone Functions Are Inactive, Enabling Features Via Diagnostic Tool May Be Required.
• Search By OEM Part Numbers 9807427380, 9809842880 Or Reference 9821851780 To Improve Chance Of Finding The Correct Unit.

Compatibility Note

This Unit Is Intended For First-Generation Peugeot 3008 And 5008 Models. Verify Fitment By Comparing Part Numbers And Connector Layouts Before Installation.

Original multifunction display to display information from radio, navigation, phone and on -board computer. It comes from the Peugeot 3008 I, is completely tested and fully functional – without reported errors. After assembly, it is necessary to assign the display to the car and set the diagnostics.

A suitable solution for cases where the original display shows defects such as faded painting, dead pixels, lines in the image, unstable undergo or spontaneous shutdown. Thanks to the OEM design, the dimensions, attachment and connectors sit, so the replacement is fast and without dashboard modifications.

As a rule, you can handle the mounting in tens of minutes: After disconnecting the battery, remove the upper dashboard cover, unscrew the display holder, disconnect the connector and fit the spare part in the opposite order. Subsequently, it is necessary to “pass” the display and configure the car using diagnostics (eg diameter) to correctly display data from radio, parking sensors, on -board computer or navigation.

This part is sought after by multiple catalog codes; If they coincide with your original work, the likelihood of compatibility is very high. Typically fits on the Peugeot 3008 I and 5008 I (about 2009–2016) according to the equipment.

Technical information

• Manufacturer: PSA (Peugeot/Citroën)
• Model: Peugeot 3008 I, Peugeot 5008 I
• product codes: 96735367ZD, 6593E4
• additional numbers: 6593p9

For proper operation after installation, it is necessary to set the display to the car with diagnostics (language, units, equipment). This will fully cooperate with the original multimedia unit and display all information in real time.

The Head-Up Display (HUD) offered here is a direct-fit unit used on first-generation Peugeot 3008 / 5008 models. It projects key driving information onto the windshield, allowing the driver to keep their eyes on the road while monitoring speed, navigation prompts and warning indicators. This unit is frequently searched for by part numbers (e.g. 96665877ZD, 6593K2), so technicians and DIY enthusiasts will find fast identification and fitment guidance below.

Key Benefits

– Maintain safer driving posture by keeping information in the driver’s forward view.
– OEM fitment ensures correct mounting geometry and optical alignment.
– Replacement option for faded, dim or non-functioning HUD projectors or electronics.
– Compatible with original vehicle harnesses and connectors for straightforward swap.

Technical Information

• Manufacturer: Stellantis / PEUGEOT
• Model: Peugeot 3008 I, Peugeot 5008 I
• Product Codes: 96665877ZD, 96665877ZD-03, 6593K2, 6593K3
• Additional Numbers: 96665877D, 6593k2, 6593K3

Installation Recommendations

Intended for professional mechanics and competent DIYers. Typical replacement steps:

• Disconnect the negative battery terminal before starting to avoid short circuits and protect vehicle electronics.
• Carefully remove instrument panel trim and the top dashboard cover using plastic trim tools to avoid damaging clips and dash surfaces.
• Unscrew the HUD housing fasteners and gently lift the unit to access electrical connectors. Release connectors by the locking tabs—do not pull on wiring.
• Swap the unit, reconnect harnesses and reassemble trim. Verify secure seating of the HUD and that the projecting optics are clean and free of dust or fingerprints.
• After installation, power up the vehicle and check HUD operation across brightness settings and with lights on/off. Some settings (brightness, dimming, integration with parking / light sensors) may require checking vehicle menus or basic adaptation steps available in the vehicle’s settings.

Always follow the vehicle manufacturer’s removal and refit procedures and torque values where specified.

Why This Part Fails (Common Causes)

The most frequent failure modes for Head-Up Displays are:

• LED or projector lamp degradation leading to dim or uneven projection.
• Electronic board faults from water ingress or condensation, especially in vehicles that have had windshield leaks or long-term moisture exposure.
• Connector or ribbon-cable damage during prior repairs or from vibration and thermal cycles.
• Optical contamination (dust, fingerprints) on the projector lens or combiner affecting image clarity.
• Intermittent faults caused by worn contacts or solder joint failures on the control PCB.

Understanding these causes helps select the correct replacement and avoid repeat failures (e.g., address underlying water ingress or damaged wiring harnesses when replacing the HUD).

Notes For Workshop Use

Search by the listed product codes to quickly locate the correct item for a given repair. Test functions before final reassembly and confirm that vehicle menus respond correctly to HUD settings. If the vehicle exhibits related electrical anomalies, inspect fuses, wiring and grounding points in the dash area as part of a thorough diagnosis.