This replacement radio/display unit is compatible with a range of Stellantis small cars and MPVs and is commonly sought by part numbers 9800132680 and 9822637880. Designed for professional workshops and competent DIY mechanics, the unit restores clear readout of radio information, clock and trip computer data. Buyers often search by OE number, so check the product codes below when ordering to ensure correct fitment.

Fitment

Compatible Models (examples): Citroën Berlingo B9, Citroën C3 II, Citroën C3 Picasso, Peugeot 207, Peugeot Partner Tepee. Verify the listed part numbers against the unit on the vehicle before installation.

Function

The display provides visual output for the radio and onboard computer: radio station/frequency, audio menu information, clock, basic trip computer readouts and status messages. It is a direct interface between the head unit/electronics and the driver, allowing easy reading of audio and vehicle information.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Radio/Onboard Computer Display
• Product Codes: 9800132680, 9822637880
• Other Numbers: Not Specified

Replacement Procedure

High-Level Steps: Disconnect the battery. Remove the surrounding fascia panels to access the radio unit. Unscrew and slide out the radio to reveal the display connector(s). Carefully unplug the multi-pin connector and any ribbon cables, then replace the display with the new unit. Reconnect connectors, refit the radio and fascia, then reconnect the battery. Power up and verify the display functions before completing reassembly.

Installation Recommendations

• Always Disconnect The Battery Before Work To Avoid Short Circuits And Risk Of Damage.
• Handle The Display Carefully To Prevent Static Damage And Scratches; Avoid Touching Connector Pins.
• Test The Unit Before Final Reassembly To Confirm Backlight, Characters And Menus Are Operating Correctly.
• Inspect Connectors And Wiring For Corrosion Or Broken Clips; Clean Contacts If Necessary.
• Use Appropriate Trim Tools To Avoid Damaging Dash Panels.

Common Failure Causes

Typical reasons For Display Failure Include Heat Damage From Prolonged Sun Exposure, Moisture Ingress Leading To Corrosion, Loose Or Corroded Connectors, Damaged Ribbon Cables During Previous Repairs, And Backlight Or Segment Wear Over Time. Intermittent Faults Can Also Result From Power Supply Issues Or Faulty Ground Connections.

Why Choose This Part

This display is an OE-compatible replacement sold under the referenced part numbers that restores readability and functionality to the radio and trip computer interface. It is ideal for workshops and competent DIYers who need a reliable replacement without modifying the vehicle’s original wiring or electronics.

Notes

Search By Part Number: Customers frequently locate this component using codes 9800132680 or 9822637880. Ensure these numbers match the unit on the vehicle to confirm fitment.

Product Overview

This replacement display unit is designed for Citroën and Peugeot vehicles and serves as the visual interface for the radio and on-board computer. It reproduces radio station information, menu screens, trip computer readouts and controlled settings. The unit is a direct-match electronic module commonly searched by part numbers such as 9666483680-00, 9821851780, 6593H7 and 6593H8, making it easy to find for professional workshops and DIY mechanics.

Benefits

• Restores clear, legible display for radio and trip computer functions.
• Direct-fit product that replaces faulty or dark screens caused by backlight or connector faults.
• Improves usability of infotainment and instrument menus for everyday driving and diagnostics.

Technical Information

• Manufacturer: Stellantis
• Model(s): Peugeot 207, Peugeot 308 (Also Compatible With Selected Citroën And Peugeot Models)
• Product Codes: 9666483680-00, 9821851780
• Other Numbers: 6593H7, 6593H8

Compatibility And Notes

The display is commonly fitted to earlier-generation Peugeot 207 and 308 platforms and to equivalent Stellantis electrical architectures. Some features or menu items may require activation or enabling via diagnostic equipment to function exactly as the original unit did. Check that the connector layout and housing match your vehicle before installation.

How The Unit Is Replaced

Replacement is straightforward for a trained technician or an experienced DIYer with basic tools. Typical steps:

• Disconnect the negative battery terminal before you start to avoid short circuits and protect vehicle electronics.
• Remove surrounding trim panels carefully to access the radio/display area—use plastic trim tools to avoid damage.
• Unscrew and extract the radio/head unit to reach the display module if it is mounted separately.
• Disconnect the display electrical connectors (pay attention to ribbon cables and locking clips).
• Install the new display, reconnect all plugs, test functionality before reassembling trim.
• After installation, reassemble trim and reconnect the battery. Perform any required diagnostic enabling if certain functions are not active.

Installation Recommendation

Always disconnect the battery prior to removal and follow manufacturer procedures to prevent damage to sensitive electronics. Handle the display and ribbon cables gently, observe electrostatic discharge (ESD) precautions, and use correct torque settings for screws. If certain features are inactive after fitment, use PSA-compatible diagnostic tools (e.g., DiagBox/Lexia) to enable or code functions.

Why This Part Fails Most Often

Display failures are usually caused by age and environmental factors. The most common issues are backlight burnout, failing solder joints or cracked solder traces from thermal cycling, damaged ribbon cables or connector pins, and moisture ingress leading to corrosion. Sudden screen loss can also result from intermittent power supply faults or internal component degradation after many years of use.

Advice For Workshops And DIY Mechanics

Search by the part numbers 9666483680-00, 9821851780, 6593H7 or 6593H8 to locate the correct unit quickly. When replacing the display, inspect connectors and wiring for signs of corrosion or damage—repairing a corroded connector can prevent repeat failures. If diagnostic activation is required, use appropriate PSA diagnostic software to enable all functions and confirm proper operation.

Part description

This is a radio/computer display (electric component) designed for Peugeot 207 cars. This type of display shows information from the on-board system and the radio, so matching the connectors and product codes is important. A suitable solution when replacing a non-functioning, illegible or broken display, when you want to quickly restore functionality without unnecessary compromises.

Technical information

• Manufacturer: Stellantis Citroën Peugeot
• Model: Peugeot 207
• Other numbers: 9822637880, 6155EP

Product codes

• Product codes: 9663205580, 9663205580-01, 6593F5

Installation recommendations

Generally/typically for replacing the display (electrical part) in Peugeot 207 cars, the procedure may vary depending on the equipment and design of the dashboard. Below is a safe general procedure.

1) Before assembly

• Compare the part codes (9663205580, 9663205580-01, 6593F5) to the old part and to the label/connectors on the vehicle.
• Optically check the connectors (broken latches, bent pins, oxidation) and the condition of the display body.
• Check for damage to the viewing window/front (scratches, cracks) and for signs of moisture.

2) Necessary tools and materials

• Set of screwdrivers and/or bits (depending on design)
• Plastic crowbar for dismantling interior parts
• Clean cloth or contact cleaner (if the connectors are dirty)
• Gloves (to protect the plastics and the front surface of the display)

3) Step-by-step assembly procedure

1. Turn off the ignition and allow the car’s electronics to go to rest.
2. Disconnect the battery (minimize the risk of short circuits and errors in the electronics).
3. Dismantle the cover strips/frame around the display using a plastic pry bar so as not to damage the plastic handles.
4. Access the display mounting and carefully release it (screws/clips according to design).
5. Disconnect the electrical connector(s) – do not pull on the wiring, but on the body of the connector and the fuse.
6. Compare old and new (used) display: shape, mounting, connectors and part numbers.
7. Connect the connector(s) to the new display and check that the fuses are properly engaged.
8. Place the display in the holder and fasten it in the original way (screws/clips).
9. Reassemble the frame and all the removed interior parts.
10. Connect the battery.
11. Turn on the ignition and verify that the display responds and displays information without interruptions.
• 4) Post-assembly checks and test drive/function verification
  • Verify the readability of the display during the day and with backlighting.
  • Check that the display does not turn off when shaken/touched (typically a bad connector problem).
  • Driving the car for a short time and watch for display dropouts.

  5) The most common assembly mistakes + how to avoid them

  • Damage to plastic clips during disassembly: use a plastic pry bar and proceed in small steps.
  • Not clicked connector: always check the fuse and secure seating after connection.
  • Handling by the wiring: always disconnect/connect by the connector.
  • Assembly without disconnecting the battery: there is a risk of a short circuit or the occurrence of errors – it is recommended to always disconnect.

  Reasons why the part is damaged

  • Aging of electronics (fatigue of components, cold joints) – manifested by blackouts, flickering or unreadable display.
  • Oxidation and moisture in the connector area – causes intermittent contact.
  • Mechanical stress during dismantling of the interior or vibrations – damage to the attachment or connectors.
  • Voltage fluctuations in the on-board network – can accelerate the degradation of electronic parts.
  ]]> https://www.usedpartsvendor.com/electro-components/display/207-display/peugeot-207-computer-radio-display-9664791280-659399/ Thu, 04 Dec 2025 03:05:05 +0000 https://www.usedpartsvendor.com/uncategorized/peugeot-207-computer-radio-display-9664791280-659399/ Radio And On-Board Computer Display For Peugeot 207

  This replacement display is designed for the radio and on-board computer of the Peugeot 207. It is a direct-fit unit commonly searched by part numbers, making it quick to find for professional technicians and DIY car owners. Compatible with multiple OEM references, this display restores clear readability of radio menus, trip computer data and basic vehicle messages, improving driver comfort and usability.

  Technical Information

  • Manufacturer: Stellantis
  • Model: Peugeot 207
  • Product Codes: 9664791280-01, 9664791280
  • Additional Numbers: 659399, 6593A0, 9822637880

  Function And Common Applications

  The module displays radio station information, menu prompts and on-board computer readouts (trip data, settings, warnings depending on vehicle equipment). It is fitted into the centre console/radio assembly of Peugeot 207 models and interfaces with the vehicle CAN and radio headunit. Technicians often look for the exact part number when replacing this component to ensure electrical and mechanical compatibility.

  Installation Recommendations

  Replacement can be performed in a workshop or by an experienced DIYer. Typical steps:

  • Disconnect the negative terminal of the battery before starting to avoid short circuits or damage to vehicle electronics.
  • Remove surrounding trim panels carefully using plastic trim tools to avoid damaging clips.
  • Unscrew and extract the radio/head unit to access the display module. Keep track of screws and retainers.
  • Disconnect electrical connectors and any ribbon cables from the display. Pay attention to connector locks and ribbon cable orientation.
  • Swap the display module, reconnect cables and secure the assembly. Refit the radio and trim panels in reverse order.
  • Reconnect the battery and verify all display functions: backlight, characters, menus and interaction with the radio/computer.

  Use ESD precautions when handling electronic modules and avoid touching printed circuit contacts. If uncertain about disassembly or reprogramming requirements, proceed cautiously or consult workshop documentation.

  Why This Part Most Commonly Fails

  • Heat And Thermal Cycling: Repeated heating and cooling can cause solder joints to crack, leading to intermittent or total loss of display.
  • Backlight Or LCD Degradation: Illumination layers and LCD elements age over time resulting in dim, uneven or blank screens.
  • Moisture And Contamination: Water ingress or condensation can corrode contacts or damage the display electronics.
  • Voltage Spikes Or Poor Power Supply: Electrical faults, improper jump-starting or unstable supply can damage display drivers.
  • Physical Damage: Impacts to the dash or improper removal can crack the display or damage connectors.

  Typical symptoms include blank screen, missing segments, vertical/horizontal lines, flickering or dim illumination. These faults are commonly seen on vehicles with extended service life, frequently appearing after many years in use.

  Practical Notes For Mechanics And DIYers

  When searching or ordering, include the part numbers listed above to ensure a match. The unit is a plug-in module within the radio assembly; no coding is generally required for simple display replacement, but confirm behavior after installation. Keep the old unit until correct operation of the replacement is confirmed.

  Search Tips

  Common search keywords: Peugeot 207 display, radio display Peugeot 207, 9664791280 display, 659399, 6593A0, 9822637880.

  ]]> https://www.usedpartsvendor.com/electro-components/display/207-display/display-radio-computer-peugeot-207-96770437xt-1607145180/ Thu, 19 Jun 2025 02:09:09 +0000 https://www.usedpartsvendor.com/uncategorized/display-radio-computer-peugeot-207-96770437xt-1607145180/ The Radio Computer Display for Peugeot 207 is a crucial component of your vehicle’s multimedia system, providing clear visualization of radio and multimedia data. This display, identified by product codes 96770437XT and its variants, offers a cost-effective solution for replacing a malfunctioning or outdated unit while maintaining compatibility and functionality.

  Some features of this display might require activation via diagnostic tools to ensure full operation within your Peugeot 207’s electronic system. Installation is generally straightforward but may necessitate professional calibration or software updates to fully integrate with your vehicle’s onboard computer.

  This display enables improved interaction with your vehicle’s multimedia and radio functions, enhancing your overall driving experience. Common issues that lead to display failure include prolonged exposure to heat, electrical faults, and wear from everyday use, which this replacement unit effectively addresses.

  Technical Information:

  Manufacturer: PSA Citroen Peugeot
  Model: Peugeot 207
  Product Codes: 96770437XT, 96770437XT-01, 1607145180, 98074948XT
  Additional Numbers: Ensure the product code matches your vehicle’s requirements before purchase.

  This replacement part is suitable for both professional mechanics and car owners performing self-repair, offering reliable performance and durability. For best results, installation by a certified technician is recommended, especially for diagnostics and feature activation. If you have any questions regarding compatibility or installation, our support team is ready to assist you.

  ]]> https://www.usedpartsvendor.com/electro-components/display/207-display/peugeot-207-computer-radio-display-9663205580-6593r7-6593r8-2/ Sat, 23 Nov 2024 03:07:38 +0000 https://www.usedpartsvendor.com/uncategorized/peugeot-207-computer-radio-display-9663205580-6593r7-6593r8-2/ The Radio Display Computer for PEUGEOT 207 is an essential replacement for a damaged or non-functional radio display. This used part is the perfect choice for repairs and maintenance. Compatible with Peugeot 207 models, this display restores full functionality of the radio control and vehicle display system, essential for a comfortable drive and efficient control of your vehicle.

  Our radio display is sourced from available used parts and selected carefully to meet your quality and functionality expectations. We offer you a solution that effectively replaces original components at a fraction of the cost of a new part.

  Technical Information

  Manufacturer: PSA CITROEN PEUGEOT

  Model: Peugeot 207

  Product Codes: 9663205580, 9822637880

  Other Numbers: 6593R7, 6593R8

  The installation of the display is straightforward and does not require special modifications; however, the replacement process should be performed by a qualified auto mechanic to ensure proper connection and functionality. This part is generally durable, but like all electronic components, it may experience wear due to prolonged use or external influences.

  Investing in a quality used part is an economical alternative to purchasing new parts, especially if you are looking for a quick and effective solution to restore your vehicle’s functionality. This radio display has been thoroughly inspected and is ready for installation and use.

  If you have any questions regarding the compatibility or installation of this part, please do not hesitate to contact us. We are here to help you with your auto repair needs.

  ]]> https://www.usedpartsvendor.com/electro-components/display/207-display/peugeot-207-computer-radio-display-9656102380/ Sat, 23 Nov 2024 03:07:38 +0000 https://www.usedpartsvendor.com/uncategorized/peugeot-207-computer-radio-display-9656102380/ The Radio Display Computer Peugeot 207 9656102380 is an essential component for your vehicle’s audio system, specifically designed for the Peugeot 207 model. This display unit is crucial for providing clear visual feedback from the vehicle’s audio system, ensuring that you can navigate through your entertainment options effortlessly.

  Replacing the radio display is straightforward, making it suitable for both professional mechanics and DIY enthusiasts. It is advisable to replace it when you notice any flickering, lack of response, or clarity issues, as these can hinder your driving experience. Typically, these displays may fail due to wear and tear, exposure to moisture, or electrical issues within the car.

  Technical Information

  • Manufacturer: Peugeot
  • Model: 207
  • Product Codes: 9656102380
  • Additional Numbers: None

  This part is not only vital for functionality but also enhances the overall aesthetic of your vehicle’s interior. Don’t compromise on quality; choose the Radio Display Computer Peugeot 207 9656102380 for an optimal audio experience.

  ]]> https://www.usedpartsvendor.com/electro-components/display/207-display/citroen-c4-computer-radio-display-9660468680/ Sat, 23 Nov 2024 03:07:38 +0000 https://www.usedpartsvendor.com/uncategorized/citroen-c4-computer-radio-display-9660468680/ The Radio Display Unit Citroën C4 9660468680 is an essential component for your vehicle’s multimedia system. Designed specifically for Citroën C4 models, this display unit ensures optimal performance and user experience.

  As an essential interface for vehicle media controls, this display allows drivers to easily navigate through radio stations, adjust volume, and access other multimedia functionalities. If you notice your display malfunctioning, such as flickering or complete failure, it is advisable to replace it promptly as it can affect your overall driving experience and safety.

  Typically, the display unit should be replaced every 5-7 years, depending on usage and exposure to elements. Common reasons for failure include electrical issues, physical damage, or wear and tear over time.

  Technical Information

  • Manufacturer: Citroën
  • Model: C4
  • Product Codes: 9660468680
  • Additional Numbers: None
  ]]> https://www.usedpartsvendor.com/electro-components/display/207-display/peugeot-207-computer-radio-display-9663205580-6593f5/ Sat, 23 Nov 2024 03:05:03 +0000 https://www.usedpartsvendor.com/uncategorized/peugeot-207-computer-radio-display-9663205580-6593f5/ The Radio Display Computer for Peugeot 207 is a vital component designed to enhance your vehicle’s audio experience. Compatible with models including the Peugeot 207, this display unit ensures that you have access to vital information and controls for your audio system.

  Often sought after by auto mechanics or car enthusiasts performing DIY repairs, this replacement part boasts a simple installation process. Typically, installation can be completed within a few minutes, making it convenient for those looking to restore functionality to their audio setup.

  It’s common for radio displays to fail due to electrical issues, continuous use, or impacts which can cause malfunction or poor performance. Regular maintenance and timely replacement can prevent further complications and maintain your vehicle’s overall audio functionality.

  Technical Information

  • Manufacturer: PSA Citroën Peugeot
  • Model: Peugeot 207
  • Product Codes: 9663205580, 6593F5
  • Other Numbers: 9663205580-01, 6155EP, 9822637880
  ]]> https://www.usedpartsvendor.com/electro-components/display/207-display/peugeot-207-computer-radio-display-9664483980-6155gh-6593h0/ Sat, 22 Jun 2024 04:05:32 +0000 https://www.usedpartsvendor.com/uncategorized/peugeot-207-computer-radio-display-9664483980-6155gh-6593h0/ The Radio Display Computer is designed specifically for Peugeot 207 vehicles, serving as a crucial component that allows drivers to interact with their radio system effortlessly.

  As vehicles age, electronic components like radio displays may fail due to wear and tear or exposure to extreme conditions. Regularly checking and replacing these units can prevent communication issues between the vehicle and its audio system.

  This model is compatible with several Peugeot vehicle configurations and is sought after for its reliability and quality. Ensure optimal performance by using original equipment manufacturer (OEM) parts for repairs and replacements.

  Technical Information

  • Manufacturer: PSA
  • Model: Peugeot 207
  • Product Codes: 9664483980
  • Additional Numbers: 6155GH, 6593H0
  ]]>