Main product description

ECU ABS/ESP ATE – control unit + hydraulic block/pump (so-called ABS cube) for PSA cars. Original used part from Peugeot 301 (robotized gearbox/ETG), also suitable for Peugeot 208 and Citroën C‑Elysée according to matching codes and equipment. A wiring/connector harness is also included.

Why choose this part?
– Original ATE/PSA ABS/ESP module: correct function of ABS, EBD and stabilization systems according to the car’s equipment
– Complete aggregate: ECU electronic unit + hydraulic block with pump motor
– Great for quickly replacing a faulty module (typical symptoms: ABS/ESP lights, pump/pressure errors, internal unit failure)

Vehicle compatibility
– Peugeot 208 (A9) – according to specific equipment and unit codes
– Peugeot 301
– Citroën C-Elysée
Note: Units vary by equipment (ESP/ASR, type of transmission, engine, etc.). Always compare the part numbers on the nameplate of your original unit.

Part numbers (for lookup and verification)
– PSA: 9817031780, 1616784580
– ATE ECU: 10.0915-3957.3
– ATE hydraulic block: 10.0625-3286.1
Also referred to as: ABS ECU, ESP unit, ABS/ESP module, ABS ATE block, ABS hydraulic unit.

Technical information
– System manufacturer: ATE (Continental)
– Functions: ABS + ESP stabilization system (depending on the car’s equipment), electronic brake force distribution
– Assembly: electronic control unit + hydraulic block with pump motor and valves
– Connector: ATE multi-pin connector; the relevant piece of cabling is also included

Assembly, coding and commissioning
– After assembly usually necessary:
– unit coding/configuration according to car equipment (manual/robotic transmission, ESP/ASR, etc.)
– assignment of VIN and variants (Diagbox/PP2000/Lexia)
– basic setting and calibration (e.g. steering wheel angle sensor), service bleeding of ABS via diagnostics
– Recommendation: check the power supply, grounding and fuses of the pump before replacement; use quality DOT4 brake fluid.

Condition and origin
– Used original part from Peugeot 301 (robot gearbox); always judge functionality and compatibility by the above numbers.
– The visual condition corresponds to the photos in the menu (if available).

How to check compatibility
– The fastest is to compare the PSA number and the ATE numbers on the label of your old unit: 9817031780 / 1616784580 / 10.0915-3957.3 / 10.0625-3286.1
– In case of a different end number, contact us with the VIN – we will verify interchangeability.

This product will help solve frequent ABS/ESP faults in Peugeot 208, 301 and Citroën C‑Elysée cars. If you are looking for “ECU ABS ESP 9817031780” or “ATE 10.0915-3957.3 / 10.0625-3286.1”, this is the matching unit including hydraulic block and wiring.

Looking for a reliable and quality spare part for your Citroën or Peugeot? Introducing the ECU ABS, the ABS pump control module, which is an essential element for the proper operation of your vehicle’s braking system. This module ensures effective braking pressure control, which is key to your safety while driving.

This part was dismantled from the Peugeot 301 and is also compatible with the Peugeot 208 and Citroen C-Elysée. The unit also includes original cabling, which facilitates installation and ensures the correct functionality of the unit after assembly in your vehicle.

technical information
Manufacturer: ATE
Model: Citroën C-Elysée, Peugeot 208, Peugeot 301
Product codes: 9804162080, 1609720280, 1610183180, 1609720380, 1610183280
Other numbers: 10.0915-1177.3, 10.0622-3278.1

The use of original cabling simplifies assembly and ensures that ECU ABS will work as it should. The ABS pump is essential for the proper functioning of the brake system, especially in critical situations where it is necessary to respond quickly. The assurance that your brakes work properly can literally save lives.

When choosing used auto parts, trust in their origin and functionality is important. This ECU ABS module has been carefully tested and is ready for installation. Save on the cost of new parts while you get a reliable part that extends the life of your car.

Searching for a reliable and fully functional control module for your ABS and ESP systems? This ECU ABS ESP unit, with product codes 9817031680 10.0915-3947.3 1682592280, is designed for Citroën and Peugeot vehicles, primarily Peugeot 208, Peugeot 301, and Citroën C-Elysée models. It ensures optimal functionality and stability of your vehicle’s braking and electronic stability programs.

This part is crucial for the proper operation of your vehicle’s Anti-lock Braking System (ABS) and Electronic Stability Program (ESP). It allows effective response during critical driving situations, significantly enhancing driving safety. The package includes the full wiring harness, facilitating straightforward and secure installation in your vehicle.

Technical Information

Manufacturer: ATE
Model Compatibility: Suitable for Peugeot 208, Peugeot 301, Citroën C-Elysée
Product Codes: 9817031680, 10.0915-3947.3, 1682592280, 1616784480
Additional Numbers: OEM specification compliant for Citroën and Peugeot models

This ECU module is essential for any workshop or DIY mechanic working on Citroën and Peugeot vehicles, guaranteeing compatibility and ease of installation. Regular wear or electrical faults can cause ABS and ESP malfunctions, so timely replacement ensures your vehicle maintains its safety systems properly.