This complete antenna cable loom is designed for Peugeot 407 cars and is an ideal replacement for workshop and DIY repairs. The harness restores OEM-style connectivity between the antenna base, radio unit and any integrated telematics or GPS antennas. Frequently searched by OE numbers 9655815280 and 6561V1, this part helps recover weak or intermittent radio reception, reduce noise and ensure reliable signal routing for factory infotainment systems.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 407
• Product Codes: 9655815280, 6561V1
• Other Numbers: 6561V1 | 9655815280

Compatibility And Applications

Fits Peugeot 407 models. Often used to replace damaged or corroded antenna cabling on vehicles equipped with factory radio and telematics systems. Common searches use the OE numbers listed above, so include these in your parts lookup for faster identification.

Replacement Procedure

Recommended for professional mechanics and experienced DIYers. Typical replacement steps:

1. Disconnect the negative battery terminal to prevent short circuits and protect electronic devices.
2. Remove interior trim and headliner panels as required to access the antenna base and cable routing paths.
3. Unplug the antenna connectors from the radio and from the antenna mast/base. Take note of connector orientations and clips.
4. Withdraw the old harness, feed the new harness along the original routing, secure with clips or ties and ensure it does not rub against sharp edges.
5. Connect the new harness to the antenna base and radio, reattach any ground points, and check connector seating.
6. Before final reassembly, reconnect the battery and test radio reception and any connected modules (AM/FM, DAB if applicable, GPS, hands-free antenna) to confirm proper operation.
7. Reinstall trims and panels, ensuring no pinches or kinks in the cable loom.

Installation Recommendations

• Always disconnect the battery before starting work to protect vehicle electronics.
• Handle coaxial connectors carefully; avoid bending the inner conductor or damaging connector shells.
• Use dielectric grease sparingly on external connectors to help prevent corrosion where appropriate.
• Secure the harness with original-style clips or cable ties and avoid contact with moving parts or sharp edges.
• Test the radio and antenna functions before final panel refit to save time if further adjustments are needed.

Common Failure Reasons

• Water Ingress And Corrosion: Moisture at the antenna base or connector points causes signal loss and increased resistance.
• Physical Damage: Roof damage, accidents, or forceful removal of the antenna mast can sever or crush the coaxial cables.
• Connector Fatigue: Repeated removal/installation or poor seating leads to intermittent contact.
• Rodent Or Pest Damage: Chewing can sever insulation or inner conductors on looms routed in vulnerable areas.
• Poor Grounding Or Loose Mounts: A bad ground at the antenna base reduces reception quality.

This antenna harness is a practical, cost-effective way to restore reliable radio performance on Peugeot 407 vehicles. Use the OE numbers 9655815280 and 6561V1 when searching to find the correct replacement quickly.

This impedance adapter is designed to restore correct antenna matching after replacing or upgrading the factory head unit in Peugeot 407 models. Ideal for professional workshops and experienced DIY mechanics, the adapter prevents reception loss, reduces static and improves FM/AM signal quality when integrating aftermarket radios or repairing antenna circuits. Frequently searched by part numbers, this unit is a direct and practical solution for antenna impedance mismatches on PSA‑platform installations.

Key Benefits

• Restores correct antenna impedance to ensure optimal radio reception.
• Direct fit for compatible Peugeot 407 antenna connections—fast to install in the workshop or at home.
• Makes aftermarket head unit integration simpler without modifying factory wiring.
• Small, robust design for long service life when mounted and sealed correctly.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 407
• Product Codes: 9647837380, 6561EG
• Additional Numbers: NFP

Installation Recommendations

Before starting, prepare basic hand tools and a clean workspace. Typical installation steps:

1. Remove the radio trim and factory head unit following vehicle trim removal procedures to avoid damage.
2. Locate the antenna lead at the back of the head unit. Unplug the factory antenna connector.
3. Connect the impedance adapter inline between the vehicle antenna cable and the new or existing head unit antenna socket. Ensure connectors fully engage and latch.
4. Secure the adapter away from moisture and moving parts. Use dielectric grease on connectors if available to reduce corrosion risk.
5. Reassemble dash panels and test radio reception on multiple frequencies to confirm correct operation.

Tip: If reception remains poor after fitting the adapter, inspect the antenna mast, feeder cable and grounding points for damage or corrosion.

Common Failure Reasons

• Connector Corrosion: Moisture ingress or aged seals cause loss of contact and increased signal attenuation.
• Mechanical Damage: Broken or bent pins, or cracked plastic housings from rough removal/installations.
• Feeder Cable Faults: Problems in the antenna cable or mast (broken cable, water in cable) are often mistaken for adapter failure.
• Mismatch After Radio Replacement: Aftermarket units with different antenna input impedance require this adapter to match the vehicle antenna system.

Notes For Professionals And DIYers

This adapter is commonly searched by part numbers 9647837380 and 6561EG—include these when sourcing or verifying compatibility. The product is intended to address antenna impedance matching issues on Peugeot 407 installations and simplify integration of non‑factory radios. Follow safe workshop practices when working behind the dashboard to avoid damage to trim and electronic components.

High-quality replacement antenna assembly for the windscreen designed for Peugeot vehicles. This antenna unit receives radio signals for the vehicle’s head unit and is frequently searched by part numbers 9661102880 and 6561LG. Intended for professional workshops and experienced DIY mechanics, the unit is commonly used when radio reception deteriorates or after windscreen replacement.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model(s): Peugeot 407; Peugeot 308; Citroën C6
• Product Codes: 9661102880
• Other Numbers: 6561LG

Installation Recommendations

To ensure a safe and reliable replacement, follow these general steps and precautions:

1. Disconnect the negative battery terminal before starting to avoid short circuits.
2. Remove the necessary interior trim or headliner panels to access the antenna connector and mounting area. Use plastic trim tools to prevent damage.
3. Unplug the antenna connector and carefully release any clips or adhesive securing the unit to the windscreen.
4. Remove the old antenna and mount the new unit in the same orientation. Ensure proper seating and cable routing without sharp bends or pinches.
5. Reconnect the antenna connector, reassemble interior panels, reconnect the battery and verify radio reception across AM/FM bands.

Check connector contacts for corrosion and ensure any integrated amplifier or diversity connections are compatible with the vehicle’s wiring. After installation, test reception in different locations and drive conditions to confirm correct operation.

Why The Part Fails Most Often

• Mechanical Damage During Windscreen Replacement Or After Collisions Causing Breakage Of The Antenna Or Cable.
• Water Ingress Or Corroded Contacts Resulting In Intermittent Or Lost Signal.
• Fatigue Or Damage To The Coaxial Cable From Vibration, Improper Routing Or Aging.
• Failure Of An Integrated Amplifier Or Internal Components (If The Unit Includes An Amplifier).

Signs Of Failure

Common symptoms include weak or no AM/FM reception, intermittent signal, increased static or noise, and loss of specific frequency bands. When the head unit and cabling are confirmed functional, replacing the windscreen antenna assembly with the correct part number (e.g., 9661102880 / 6561LG) typically restores proper reception.

High-frequency tweeter speaker designed as a direct replacement for Peugeot 206 audio systems. This compact driver restores clear, detailed highs and vocal presence that are often lost when original tweeters age or are damaged. Ideal for professional workshops and DIY mechanics, the unit is frequently searched by its OEM numbers, making it easy to find and fit. Compatible with factory speaker crossovers and amplifiers when the OEM part codes below match the vehicle.

Key Benefits

Improves vocal clarity and instrument detail in the upper frequency range. Simple mechanical fitment for quick service times in door trim, dash or A-pillar locations depending on original vehicle layout. Helps eliminate distortion, rattles and reduced output caused by failed tweeter diaphragms or voice coils.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Peugeot 206
• Product Codes: 9640322880, 9666384580
• Other Numbers: 6562G9, 6262A8

Compatibility And Fitment

Primary fitment is Peugeot 206 (various body styles and equipment levels). Use the OEM product codes above to confirm direct replacement fitment for the vehicle. This tweeter is intended to replace the original high-frequency driver without modification when the part numbers match.

Function And Typical Failure Causes

Tweeters reproduce the high-frequency portion of the audio spectrum, adding clarity to voices, cymbals and other high-frequency content. Common causes of failure include:

• Overload or Distortion: Excessive volume or amplifier clipping can burn the voice coil.
• Moisture Ingress: Water or condensation in door/a-pillar areas leads to corrosion and membrane damage.
• Physical Damage: Impact during door removal/installation or panel replacement can deform the dome.
• Ageing And Wear: Long-term heat and UV exposure degrade diaphragms and adhesives.
• Electrical Faults: Faulty crossover components or amplifier issues can reduce output or damage the tweeter.

Installation Recommendations

Recommended for installation by trained technicians or experienced DIYers. General replacement steps:

• Remove Interior Trim: Carefully remove the door panel, A-pillar trim or dash grille to access the tweeter. Use appropriate trim tools to avoid damaging clips.
• Disconnect Power Sources As Needed: For safety, isolate the audio system (turn ignition off). Disconnecting the vehicle battery is optional for speaker replacement but recommended if you will work near airbags or vehicle electronics.
• Unplug Connector: Disconnect the tweeter electrical connector. Note connector orientation and clip positions for reassembly.
• Remove Mounting Hardware: Unscrew or unclip the tweeter from its mounting bracket or housing.
• Install New Unit: Fit the replacement tweeter, secure mounting hardware and reconnect the electrical connector with correct polarity.
• Test Audio: Before reassembling trim, test the speaker at moderate volume to verify correct operation and polarity. Refit trim panels ensuring no pinched wiring.

Why Replace The Tweeter

Replacing a failed tweeter restores the high-frequency balance of the audio system and prevents listener fatigue caused by distortion or missing frequencies. Replacing only the failed driver is cost-effective compared with full speaker set replacements when other speakers are still in good condition.

Search And Identification Tips

Customers and workshops commonly search by OEM codes 9640322880, 9666384580, 6562G9 and 6262A8. Including these numbers in your search will increase the chance of finding the exact replacement part. Use clear photos of the existing tweeter and connector when in doubt.

Notes For Workshops

Keep replacement tweeters in stock by common OEM number to minimize vehicle downtime. When replacing speakers on vehicles with factory amplifiers or active crossovers, verify amplifier settings and polarity to avoid damage to the new driver.

Original Tweeter for Citroën C-Crosser and Peugeot 4007. Suitable for all doors for standard audio systems-does not fit on cars with Audio 3 and Multivision equipment. An ideal replacement for a non -functional or distorting tweeter that will return net heights, space and clarity of sound to your interior.

The part is designed as a direct replacement with the original attachment and a connector, so the replacement takes place without modifications. Thanks to the same shape of the collar and locks, it fits into the original holder in the triangle by the mirror (Sail panel) on the front and rear doors at the equipment without a premium multimedia unit.

Compatibility and tips for assembly
– Compatible with standard audio equipment (without audio 3 / multivision).
– Replace procedure: Carefully remove the plastic triangle by the mirror, disconnect the tweeter connector, release the original speaker (latch/screw), attach the new part, plug the connector and try the function before installing the lining. Work usually takes units of minutes per piece.
– To verify the suitability, we recommend comparing the part number on your old speaker with the codes below or verify by VIN.

What is the tweeter for and why is left
The tweeter processes the highest frequency band (height) and complements the main door speaker. Typical symptoms of the failure are missing heights, cracking or intermittent sound. This is due to mechanical damage to the membrane or tired switch/protection in the body of the tweeter. The replacement is fast and represents a cost -effective repair with an immediate effect on listening quality.

technical information

• manufacturer: dog/Citroën • Peugeot (OEM)
• Model: Citroën C-Crosser (about 2007–2012), Peugeot 4007 (about 2007–2012)
• product codes: MR986377, 6563T3
• Other numbers: 6563.t3, MR 986377

Why choose the original part
The original tweeter preserves the factory character of the sound and fits smoothly to the original location without adjusting wiring or attachment. Easy assembly, reliable compatibility and certainty of the right size make this option the fastest way to a fully functional audio system.

Original door speaker for Citroën C -Crosser and Peugeot 4007. These are the OEM part of the PSA concern with numbers 8720A017, 6562R8 and 1612537280.

Designed for all doors (front and rear) models, except for vehicles equipped with above -standard audio systems “Audio 3” and “Multivision”. For easy compatibility verification, compare the part number on your original speaker and the shape of the connector.

Why this part changes: door speakers in older cars often leave due to moisture in the door, fatigue material or mechanical damage to the membrane. This is manifested by greater volume, loss of bass or complete outage of one channel. Replacing for the original speaker restores the original sound and reliability.

How is the exchange (general recommendation):

• Remove the door fill (screws, plastic buckles) and carefully disconnect the bowden and wiring.
• unscrew the old speaker, disconnect the connector and check the seal and foil against moisture.
• Install a replacement speaker in the original mounting points, connect the connector and perform a short audio test.
• Carefully return the door fill and check that nothing does not resonate.

Key advantages of the original episode:

• OEM Quality and accurate attachment, including the correct fit depth.
• Compatibility with original vehicle cabling – without modification.
• recovery of factory sound without compromise.

Note to condition: The original part used can carry common cosmetic signs of use that do not affect the function. Always compare the part numbers and the connector with your car to be sure.

technical information

• Manufacturer: PSA (Citroën/Peugeot)
• Model: Citroën C -Crosser; Peugeot 4007 (door speaker, except “Audios 3” and “Multivision”)
• product codes: 8720A017; 6562r8; 1612537280
• Other numbers: Not specified

This impedance adapter is designed for Peugeot 407 applications where the factory audio wiring or amplifier requires matching to an aftermarket head unit or to stabilise speaker loads. It helps prevent speaker overload, reduces distortion caused by impedance mismatch and simplifies the interface between non‑OEM radios and the vehicle’s audio system. Commonly searched under product codes 9654390480 and 6561T7, this part is aimed at professional technicians and DIY enthusiasts performing audio system replacements or repairs.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 407
• Product Codes: 9654390480, 6561T7
• Other Numbers: NFP (as referenced in supplier listing)

Function And Benefits

The adapter matches electrical impedance between the vehicle’s factory amplifier/speaker circuits and an aftermarket radio or replacement components. By adapting impedance it prevents excessive current draw from the head unit, maintains proper damping of speakers and reduces the risk of amplifier protection mode activation. Installation typically restores correct audio balance and reduces noise or distortion caused by mismatched loads.

Typical Fitment

Fits Peugeot 407 models equipped with the corresponding factory audio harnesses. Often used when replacing the factory head unit with an aftermarket radio or when diagnosing intermittent speaker faults linked to impedance mismatches.

Installation Recommendations

• Disconnect the vehicle battery before starting to avoid shorts.
• Remove the radio/head unit trim to access the wiring harness and locate the inline adapter position between the radio connector and speaker leads.
• Match connectors carefully; do not force incompatible plugs. If required, use the correct plug adapters or soldered splices with heat shrink for a secure connection.
• Secure the adapter away from heat sources, moving parts and moisture. Use cable ties and insulate exposed contacts.
• After installation, test all speaker channels at low volume first, then increase to confirm stable operation and absence of distortion or overheating.

Why This Part Fails

Impedance adapters are relatively simple but can fail or cause issues for several reasons: corrosion or water ingress at connectors, mechanical damage from vibration or poor routing, degraded internal components after long service life, or poor installation practices (loose crimps, incorrect wiring). Failures are generally uncommon but become more likely in older vehicles, after prior stereo modifications, or when the cabin has experienced moisture exposure.

For professional results, follow correct wiring diagrams, use quality connectors and verify speaker and amplifier continuity before and after replacement. Using the correct product codes (9654390480, 6561T7) when searching ensures compatibility with the Peugeot 407 audio harnesses.

Ideal for all repair professionals and amateur mechanics, this essential component ensures proper functioning of your Citroën C4 II B7 and DS4 radio system. This quality part guarantees compatibility with your vehicle’s audio system, which is crucial for optimal performance and safety. With this adapter, you can be assured that the technology in your vehicle will operate as intended.

This adapter is designed to allow for FM2 radio integration, and its replacement is relatively straightforward, enabling you to save on professional service costs. If your Citroën C4 II or DS4 requires this specific part, don’t hesitate to add it to your shopping cart. Remember, you should never underestimate the importance of proper functioning of your vehicle’s electronic components.

In radios and their accessories for Citroën C4 II and DS4 vehicles, compatibility and quality are essential, which this impedance adapter definitely provides. Assurance that your radio will operate without issues brings not only comfort but also increases safety while driving.

Don’t forget to check out our other offers of used parts, where you can find other necessary components for your vehicle. With us, you can keep your Citroën running without unnecessarily high expenses!

Technical Information:

• Manufacturer: PSA CITROEN PEUGEOT
• Model: Citroën C4 II B7, DS4
• Product Codes: 9666030380, 658777

Are you searching for a dependable and quality auto part for your Citroën or Peugeot? Our CLARION PU-3916B CD Reader is the perfect solution for Citroën C4 B7, DS4, and Peugeot 308 T9 models. This part is ideal for repairs and maintenance of your vehicle, ensuring a valuable contribution to the functionality of your audio system.

This CD Reader features excellent disk readability and is resistant to regular wear and tear, which is crucial for used parts.

Technical Information:
Manufacturer: Clarion
Model: PU-3916B
Product Codes: 9805593680, 9805593680-02
Other Numbers: 1613502180, 1629119380

Suitable for installation in selected vehicle models, the CD Reader replacement is a process that can be carried out by a professional mechanic or an experienced DIY enthusiast. Due to its compatibility with selected models, this reader is an ideal solution for restoring the audio system in your car. If you are passionate about repairing your vehicle, this product allows you to maintain high functionality and performance of the audio system.

Whether you are a professional mechanic or a car repair enthusiast, our CLARION PU-3916B CD Reader for Citroën and Peugeot is the right choice for you. Ensure that your vehicle is always in top condition with our auto parts. This not only enhances functionality but also increases the overall value of your car.

The Telematics Receiver is a crucial component of your vehicle for the proper functioning of telematics services, such as navigation, hands-free calling, or connecting your smartphone. Its replacement may be necessary in the case of malfunction of the original receiver or during repairs of damaged vehicle electronics.

Technical Information:
Manufacturer: Magneti Marelli
Model: Citroën C4 II, DS4, Peugeot 208, 2008, 508
Product Codes: 9815356380, 1614449880, 1621264480
Additional Numbers: Not available

Our car part has been thoroughly checked and is in perfect condition for further use. For your maximum satisfaction, we provide detailed images and the possibility to inquire about product specifics. Don’t waste time searching for new and expensive parts when you can obtain the same quality here for a fraction of the price.

We assure you that the part is authentic and ready for installation. If you are unsure about the installation, we recommend consulting a professional mechanic. This investment will pay off many times over by extending the lifespan of your vehicle and ensuring optimal functionality of all its systems.

Invest in your vehicle with confidence in us. Your satisfaction is our priority. Thank you for your interest in the used car parts from our range.