This Clarion multi-disc CD changer is a direct-fit audio accessory commonly found in Citroën C5 units from 2005 and compatible Stellantis radio systems. It offers reliable playback and magazine-style loading for multiple CDs, providing a simple OEM-style solution for garages and DIY enthusiasts who want factory-compatible sound without modifying the head unit. The unit is particularly useful where original in-dash CD playback is required or when replacing a worn or failing changer with the original specification part numbers 9647427980 / 6564E1.

Practical Advantages

Mechanics and home repairers will appreciate the straightforward integration with factory radios, the included CD magazine, and the availability of mounting brackets and cabling as separate parts. The changer keeps the vehicle interior tidy by using the OEM mounting points and offers plug-and-play operation with supported head units.

Installation Recommendations

Before starting, ensure Ignition Is Off and Battery Negative Is Disconnected to avoid short circuits. Typical installation steps:

• Locate The Factory Changer Position (commonly in the glovebox, center console or trunk area depending on vehicle configuration).
• Remove Trim Or Glovebox Panels To Access The Unit — keep fasteners in a safe place.
• Disconnect The Factory Harness And Any Antenna Or Control Cables.
• Unscrew The Changer From Its Mounting Bracket And Remove The Old Unit.
• Install The New Changer Into The Bracket (Bracket Code 6560Q4 If Required) And Connect The Matching Cable (Cable Code 6560XR If Required).
• Reconnect The Battery, Test Playback And Magazine Loading Before Reassembling Trim.

If the original mounting plate or cable is missing, use the referenced accessory codes to source correct hardware. When routing cables, avoid sharp edges and secure loose wiring to prevent rattles or connector strain.

Why This Part Fails Most Often

• Mechanical Wear Of The Loading Mechanism And Gears From Years Of Use.
• Laser Diode Degradation Causing Read Errors On Older Discs.
• Contaminated Or Worn CD Magazine Rims Leading To Misfeeds Or Jams.
• Connector Corrosion Or Broken Wiring Affecting Power Or Data Signals.
• Moisture Or Temperature Cycling Causing Electronic Component Failure.

Technical Information

• Manufacturer: Clarion
• Model: Citroën C5 (from 2005)
• Product Codes: 9647427980, 6564E1
• Additional Numbers: Bracket 6560Q4, Connecting Cable 6560XR

This unit is supplied with the CD magazine included. Ideal for professional workshops and experienced DIYers replacing an original Clarion changer in compatible Citroën/Peugeot vehicles. When fitting, follow industry-standard ESD and safety procedures and verify connector seating and secure mounting to avoid vibration-related faults.

This Clarion CD changer bracket is a direct-fit mounting solution designed for Citroën C5 owners and professional workshops. It secures the Clarion CD changer in the factory mounting location, helps reduce vibration and movement, and restores correct alignment with the vehicle’s audio harness. Suitable for mechanics and experienced DIYers, this part is often searched for by its product code 6560Q4, making it easy to find when replacing damaged or missing mounts.

Why Choose This Bracket: It restores OEM-style mounting, eliminates rattles caused by loose or broken brackets, and allows a neat installation of the Clarion CD changer without modifying interior trim. When combined with the matching connecting wiring (code 6560XR), the installation returns the audio unit to full functionality.

Technical Information

• Manufacturer: Clarion
• Model: Citroën C5 (from 2005)
• Product Codes: 6560Q4, NFP
• Additional Numbers: 6560XR (Connecting Wiring)

Installation Recommendations

Recommended for experienced technicians and competent DIY installers. Basic replacement steps:

• Disconnect the negative battery terminal before working on the vehicle’s electrical components to prevent short circuits.
• Remove the necessary trim panels or storage compartments to access the existing CD changer and bracket.
• Unplug the audio connector and any grounding straps, then unscrew the mounting fasteners securing the old bracket.
• Fit the new bracket into the same mounting points, tighten fasteners to secure the unit, reconnect the wiring (or fit the 6560XR harness if required), and reassemble the trim.
• Test the audio system for proper operation and check for any rattles or loose fittings after a short test drive.

Why This Part Fails Most Often

Mounting brackets commonly fail due to age-related material fatigue, plastic clip brittleness, corrosion from moisture, or damage from impacts. Vibrations over many years can loosen fasteners and cause cracks in plastic components, which leads to noise, poor mounting stability, or a unit that shifts position. Replacing the bracket restores secure mounting and prevents further wear to the CD changer and connectors.

Note: If the original audio harness is damaged or missing, consider the matching connecting wiring under code 6560XR to ensure a complete and reliable installation.

This OEM JBL amplifier is designed for factory audio systems used on certain Stellantis vehicles. It restores and boosts the car stereo output, delivering clearer mids, tighter bass and higher available power to the loudspeakers compared with systems without an amplifier. The unit is commonly searched by part numbers 9631041580 and 6560LZ, so including these references in your order or search will speed up finding the correct fitment.

For Whom This Part Is Intended: Professional Auto Technicians And DIY Enthusiasts. Ideal When Replacing A Faulty Sound Module In Workshop Repairs Or Home Installations. The amplifier is frequently sought under OE codes, so the part numbers listed below are useful for fast identification.

Installation Recommendations

Before starting, disconnect the vehicle battery to avoid short circuits. The amplifier location varies by model – it can be mounted under a front seat, behind interior trim or in the boot area. Remove the appropriate trim panels, unplug the multi-pin audio harness and any antenna/remote leads, then undo the mounting fasteners. Fit the replacement in reverse order, ensuring all connectors seat fully and any ground points are clean and tight. After installation, reconnect the battery and verify speaker channels and head unit communication. If the vehicle has security coding for the audio system, follow the factory procedure to avoid lockouts.

Why This Part Commonly Fails

Common causes of amplifier failure include water ingress and moisture-induced corrosion at connectors, thermal stress from poor ventilation, electrical overloads caused by shorted speaker wires or aftermarket amplifiers, and voltage spikes from faulty alternators or charging systems. Intermittent sound, distorted channels, or complete loss of audio are typical symptoms indicating amplifier issues. Regular inspection of connectors and wiring integrity helps prevent many failures.

Technical Information

• Manufacturer: Stellantis
• Model: Citroën C5 II; Peugeot 607; Peugeot 407
• Product Codes: 9631041580
• Additional Numbers: 6560LZ; NFP

Notes: Use the listed product codes when searching inventory or ordering to ensure correct match. If replacing the amplifier due to electrical damage, also check speaker wiring and vehicle charging system to prevent recurring faults.

Buy with confidence if you require an OEM-style JBL amplifier for the listed Stellantis models — the correct part number is the quickest way to confirm compatibility and restore factory sound performance.

This OEM JBL amplifier is a direct-fit audio module used in select Citroën and Peugeot vehicles. Ideal for professional workshops and competent DIY mechanics, this unit restores speaker power and dynamic range when the factory amplifier fails. The part is commonly searched by reference numbers 9653383680 and 6560LZ — include these codes when searching or ordering to ensure correct fitment.

Key Benefits

Reliable replacement for weakened or dead audio amplifiers. Improves volume headroom, reduces distortion at higher output and brings back balanced sound across front and rear speakers. Fits original mounting points and uses the factory wiring harness for a tidy installation without complicated splicing.

Compatibility

• Citroën C5 II
• Peugeot 607
• May also fit certain Peugeot 407 installations (verify using product codes)

How The Part Works

The amplifier receives low-level audio signals from the head unit, amplifies them and supplies the required current to the vehicle speakers. A functional amplifier is essential to achieve the original audio system performance, especially on vehicles equipped with premium JBL sound systems.

Replacement Procedure (Overview)

• Prepare Tools: Torx/Spline sockets, trim removal tools, multimeter for basic checks.
• Safety First: Disconnect the negative battery terminal before starting work to avoid short circuits and damage to vehicle electronics.
• Remove Trim: Access the amplifier by removing the appropriate trim panel or seat section (location varies by model).
• Unplug Connectors: Carefully release locking tabs and unplug all electrical connectors from the amplifier. Inspect connectors for corrosion or bent pins.
• Unbolt and Replace: Remove mounting bolts, fit the replacement amplifier, secure bolts to original torque and reconnect connectors.
• Test Before Reassembly: Reconnect the battery, power up the audio system and verify sound from all channels before reinstalling trim.

Technical Information

• Manufacturer: JBL (OEM Supplier)
• Model: Amplifier For Citroën / Peugeot Vehicles
• Product Codes: 9653383680, 6560LZ
• Other Numbers: NFP

Installation Recommendations

• Always disconnect the battery prior to removal and installation.
• Avoid pulling on wires; release connector locks properly to prevent damage to pins.
• Inspect wiring loom and speaker connectors for corrosion or rodent damage and repair as necessary before installing the new amplifier.
• Ensure secure ground connections and that the amplifier mounting surface is clean and free of moisture.
• Test the full audio system (all channels, volume range, and any factory DSP settings) before final reassembly.

Why This Part Fails Most Often

• Moisture Ingress: Water leaks into the amplifier area cause corrosion and short circuits.
• Thermal Stress: Repeated overheating or poor ventilation can damage internal components and solder joints.
• Electrical Surges: Faulty charging system or jump-start incidents can burn amplifier electronics.
• Connector Corrosion: Poor contacts at plug connectors lead to intermittent operation and channel dropouts.

Searching by part number (9653383680 or 6560LZ) is the fastest way to find the correct replacement for workshop use or DIY repairs. Restore factory sound quality with a correct-fit JBL amplifier and get the most out of your Citroën or Peugeot audio system.

Are you looking for a reliable JBL amplifier for your Citroën or Peugeot? Our used JBL amplifier (product code 9648609380) comes directly from the Citroën C5 I model but is compatible with additional vehicles including the Peugeot 607. This part is ideal for those who want to restore the quality of their vehicle’s sound system without the expense of a new unit.

JBL amplifiers are known for their exceptional sound quality and durability. Using this amplifier will bring your car’s audio system back to life. Thanks to precise manufacturing and the use of high-quality materials, this amplifier offers excellent performance comparable to new components.

Technical Information:

• Manufacturer: JBL
• Model: Citroën C5 I, also suitable for Peugeot 607
• Product Codes: 9648609380
• Additional Numbers: NFP

This amplifier is ready for installation and can be replaced relatively easily using common tools, making it perfect for both professional car mechanics and DIY enthusiasts. As a crucial component of the vehicle’s audio system, the amplifier enhances overall sound quality and driving experience.

Investing in a high-quality yet affordable used auto part like this JBL amplifier is an economically smart choice that extends your vehicle’s lifespan while maintaining its original functionality. Don’t wait—stock for these specific parts is limited!

The RD4 D2 N2 CD radio is a direct-fit multimedia unit commonly found in PSA group vehicles. Designed for professional garages and experienced DIYers, this unit delivers original functionality including CD playback and dual antenna support. The radio is often sought by part number (9659142777, 7643141392) so listing OEM references helps you find an exact replacement quickly. If you need a reliable OEM radio that matches factory controls and dashboard integration, the RD4 is a practical choice for Peugeot 407 and compatible Citroën models.

Technical Information

Manufacturer: Stellantis (Citroën / Peugeot)

Model: Peugeot 407 (compatible with some Citroën models, e.g. C5 II)

Product Codes: 9659142777, 7643141392

Other Numbers: 6564W5, 6564W6, 16085109YW

Key Features

• RD4 D2 N2 CD player unit — factory-fit functionality
• Two antenna inputs for improved radio reception or compatibility with diversity systems
• Direct dash integration with factory controls and vehicle wiring
• Requires vehicle coding/programming after installation to restore full functionality

Installation Recommendations

• Always disconnect the vehicle battery before starting removal or installation to avoid short circuits and protect vehicle electronics.
• Use appropriate trim tools to remove surrounding panels without damaging dashboard plastics.
• Carefully unplug connectors and note antenna plugs: this unit has two antenna inputs that must be reconnected correctly.
• After mechanical installation, the radio must be coded/programmed to the vehicle using PSA diagnostic equipment (e.g. DiagBox/Lexia) to restore full integration with vehicle electronics and steering wheel controls.
• If you lack diagnostic equipment, have coding performed by a technician with PSA service tools; incorrect coding may cause limited functionality or loss of features.

How To Replace

1. Disconnect the negative battery terminal and wait a few minutes.
2. Remove trim panels around the radio using plastic pry tools to avoid scratching.
3. Unscrew and slide out the radio unit, then disconnect the harnesses and antenna leads.
4. Fit the replacement unit, reconnect antenna cables and harnesses, secure the radio, and refit trim.
5. Reconnect the battery and perform vehicle coding/programming so the unit is recognized and fully functional.

Why This Part Fails Most Often

Factory radios like the RD4 may develop faults over time due to several causes: CD mechanism wear or mechanical failure, moisture ingress causing corrosion on connectors or antenna sockets, thermal stress on internal electronics, damaged or corroded antenna connectors leading to poor reception, and software/EEPROM issues that require reprogramming. In many replacement cases, the unit itself is functional mechanically but needs proper coding to the vehicle to re-enable features and communication with the vehicle network.

Notes For Professionals

This unit is commonly searched by its OEM numbers — include those codes in searches to quickly locate matching parts. Installation and final commissioning require knowledge of PSA vehicle electronics and access to suitable diagnostic tools for coding.

Compatibility And Fitment

Primarily fitted to Peugeot 407 vehicles. It is also compatible with certain Citroën models that use the RD4 radio platform, such as C5 II. Confirm dashboard opening and connector compatibility before installation.

Recommendation

Ideal for workshops and experienced DIYers who can perform physical replacement and arrange coding with PSA diagnostic equipment. Proper installation and coding restore factory integration, steering wheel controls, and full radio functionality.

Product Overview

This original-equipment RD4 CD radio is a direct-fit audio unit taken from a Peugeot 407. It is a robust OE-style head unit designed for workshops and DIY mechanics who need a reliable replacement radio with CD playback and improved reception thanks to dual antenna inputs. The unit is widely searched by its product numbers, so listing the reference codes below will help you find the correct fit quickly.

Key Features

• RD4 D2 N2 CD head unit — factory standard for many PSA models
• Two Antenna Inputs — supports antenna diversity or connection to external aerial/amplifier systems for better reception
• CD Playback plus AM/FM radio functionality
• Designed as a direct OE replacement for vehicles originally fitted with RD4 units
• Supplied used (original vehicle unit) — requires diagnostic coding to enable full operation in the replacement vehicle

Technical Information

• Manufacturer: Stellantis / Peugeot-Citroën
• Model: RD4 D2 N2
• Product Codes: 9646871777, 7643141392
• Additional Numbers: 6564W5, 6564W6, 16085109YW

Compatibility

The unit originates from a Peugeot 407 and is intended as a replacement for vehicles originally equipped with the RD4 series radio. Many buyers search for this item using the product codes listed above. Ensure your vehicle originally used an RD4-type unit before installation to avoid wiring or coding issues.

Function And Behaviour

The RD4 radio provides CD audio playback and FM/AM reception. Dual antenna inputs improve signal quality and can support external amplifier connections or antenna diversity systems used on some PSA models. When installed and coded correctly, the unit integrates with vehicle audio systems and steering wheel controls where applicable.

Replacement Procedure (General Guide)

• Prepare tools: trim removal tools, radio removal keys (if required), Torx/screwdriver set.
• Disconnect the negative battery terminal before starting to avoid electrical damage or faults.
• Remove dashboard trim panels carefully to access the radio mounting frame.
• Unscrew and slide out the radio; disconnect the main harness, antenna connectors (note there are two), and any separate amplifier or CAN connectors.
• Fit the replacement unit by reversing removal steps. Secure mounting screws and refit trim panels.
• Perform diagnostic coding to pair the radio to the vehicle (see Coding section below).

Coding And Commissioning

This RD4 unit requires diagnostic coding to enable full functionality in the replacement vehicle. Without proper coding (performed with compatible PSA diagnostic tools), features such as radio enablement, display messaging and steering wheel controls may not work. Coding must be performed by a workshop with PSA-capable diagnostic equipment.

Installation Recommendations

• Always Disconnect The Battery Before Removal/Installation To Prevent Electrical Damage.
• Use Proper Trim Tools To Avoid Breaking Dash Clips And Finish Panels.
• Label Or Photograph Connectors Before Disconnecting To Ensure Correct Reassembly.
• Have A Professional With PSA Diagnostic Equipment Perform The Final Coding/Activation If You Do Not Have The Required Tools.

Why This Part Most Often Fails

Common causes of RD4 radio failures include:

• Mechanical Wear In The CD Mechanism — frequent use and age can cause the loader or laser assembly to fail.
• Moisture Ingress And Corrosion — water or humidity can corrode connectors or internal boards, especially when dash seals are compromised.
• Thermal Stress And Solder Joint Fatigue — repeated heating/cooling cycles can lead to cracked solder joints and intermittent faults.
• Connector Or Wiring Issues — poor contacts or damaged antenna leads reduce reception or cause the unit to lose power/functions.

Notes For Workshops And DIY Mechanics

Because the radio is an original PSA unit, installation and coding workflows are standard for Peugeot/Citroën workshops. Having the product codes to hand will speed up parts lookup and compatibility checks. This unit is ideal for mechanics looking for a cost-effective, direct-fit replacement for vehicles originally equipped with RD4 radios.

The main advantage of this radio is its seamless integration with the vehicle’s electronic system. However, installation of the device requires professional diagnostics to ensure proper connection and functionality with the vehicle’s onboard system. This specification is particularly important to maintain the existing functions of your vehicle and to ensure that the new radio will operate without issues.

Technical Information

• Manufacturer: PSA CITROEN PEUGEOT
• Model: Citroën C5, 2005-2007
• Product Codes: 9650574977, 9659143077, 6564V1, 6564V2, NFP
• Other Numbers: RD4 N1 9659143077 6564V1

Overall, the RD4 N1 car radio offers top-notch performance and hassle-free integration, making it a valuable investment for any Citroën C5 owner. Please note that due to technical specifications and integration requirements, installation by a professional is recommended. By taking this approach, you ensure that your new radio will be fully functional and without complications. For more information and to purchase this car radio, do not hesitate to visit our e-shop or contact our customer support. We are here to ensure a smooth journey to upgrading your vehicle.

Product Overview

The Blaupunkt RD4 N2 is an OEM-style radio unit offering FM/AM reception, CD playback and MP3 file support. Designed for PSA Group vehicles, this unit is commonly found in Peugeot and Citroën models and carries original equipment part numbers used by Stellantis. The unit delivers a factory-fit look and retains steering wheel control compatibility when installed correctly and coded to the vehicle.

Technical Information

• Manufacturer: Blaupunkt (OEM fitment for Stellantis)
• Model: RD4 N2
• Product Codes: 9660647677, 657952, 657951
• Additional Numbers: Color Code HXF (Bruni Grey Gloss); Stellantis / Citroën / Peugeot references

Compatibility

Commonly fitted to: Peugeot 407 (example vehicle: 2007) and Citroën C5 II. Suitable for vehicles equipped with the RD4-style radio harness and factory mounting. Verify radio form factor and connector type before installation.

Installation And Replacement Guide

Basic replacement steps for an experienced mechanic or competent DIYer:

1. Disconnect the negative battery terminal before beginning work.
2. Remove trim panels surrounding the radio to access mounting screws.
3. Unscrew and carefully slide the radio from the dash, then unplug the antenna, power and speaker/vehicle connectors.
4. Fit the replacement unit, reconnect connectors and antenna, and secure the radio in the mount.
5. Reconnect the battery and carry out the required vehicle coding so the radio is recognized by the vehicle electronics.

Note: After physical installation the unit must be coded to the vehicle using diagnostic tools so that steering wheel controls, CAN-bus messaging and anti-theft settings are properly enabled.

Installation Recommendations

• Perform installation in a clean, dry workspace to avoid damage to mechanical parts and connectors.
• Use appropriate trim tools to prevent panel damage and keep all screws and clips for reassembly.
• Ensure antenna connection is secure to avoid reception issues and check speaker outputs after coding.
• If uncertain about coding or integration with vehicle electronics, have the unit coded by a workshop equipped with PSA diagnostic tools.

Why This Part Fails Most Often

Common failure causes for RD4 units include mechanical wear of the CD mechanism and laser assembly, accumulation of dust or dirt affecting the tray and optical pickup, aging solder joints or electrolytic capacitors on the radio’s power board, and moisture exposure. Symptoms typically include refusal to read CDs, intermittent audio, loss of station memory or failure to boot until coded again.

Buying Advice

This unit is a direct-fit replacement for vehicles that originally equipped an RD4 N2 radio. It is ideal for workshops and experienced DIYers who can perform physical installation and ensure proper diagnostic coding. Product codes listed above are commonly used when searching for compatible units—enter them to find matching parts quickly.

How Often It Fails

Longevity depends on usage and environment. CD mechanisms and lasers are the most vulnerable parts and typically show wear after many years of use or heavy disc playback. Proper installation and avoiding moisture or excessive heat will extend the service life.

Typical issues leading to the necessity of this replacement include wear and tear from regular use, exposure to heat and moisture, and potential fraying at connection points. It is advisable to check the condition of the cable regularly to ensure optimal functionality, and replacement may be needed every few years or sooner if any signs of damage are detected.

For installation, simply disconnect the existing cable and replace it with the new one, making sure all connections are secure to prevent any future issues. This is a straightforward process that can be handled by both professional mechanics and DIY enthusiasts alike.

Technical Information

• Manufacturer: PSA
• Model: Citroën, Peugeot
• Product Codes: 9687260380
• Other Numbers: 6574KZ