Autoantény – Used Parts Vendor

Antenna Citroën Peugeot 9650911780 6561HG

Thu, 26 Feb 2026 03:02:02 +0000

Antenna socket for radio and navigation for Citroën C3, C5

Description

Replacement antenna socket designed for radio and navigation systems used on Citroën models. This high-quality connector ensures a reliable electrical and mechanical connection between the vehicle antenna and the head unit, helping to maintain clear radio reception and stable navigation signal transmission. Ideal for professional workshops and experienced DIY enthusiasts looking for a direct-fit part identified by OEM numbers.

Technical Information

Manufacturer: Stellantis / Citroën / Peugeot
Model: Citroën C3, Citroën C5
Product Codes: 9650911780, 6561HG
Additional Numbers: 9650911780 | 6561HG

Compatibility

Works as a direct replacement on vehicles listed above where the original part number matches. Customers frequently search using the OEM numbers 9650911780 and 6561HG to find the correct antenna socket for their Citroën C3 and C5.

Function And Typical Symptoms

The antenna socket provides the physical and electrical interface between the vehicle’s external antenna and the radio/navigation head unit. When this socket degrades or fails, typical symptoms include intermittent or weak radio reception, loss of certain radio bands (AM/FM/DAB), static or noise on the audio band, or disrupted navigation signal quality. In some cases a poor connection may present as a loose or wobbly antenna base.

Why The Part Most Often Fails

Common failure causes include corrosion from water ingress, mechanical wear or damage caused by impact or improper handling during previous repairs, and connector pin deformation from repeated disconnects. Environmental exposure (road salt, moisture) accelerates corrosion, while incorrect mounting or overtightening can cause mechanical failure.

Replacement Procedure

Prepare the vehicle: Park on level ground, engage the parking brake and disconnect the negative battery terminal to avoid electrical shorts during work.
Access the socket: Depending on model, access may require removal of interior trim, headliner sections or the radio/navigation unit to reach the antenna socket connector.
Disconnect: Carefully unplug the antenna socket connector from the head unit or wiring harness. Inspect the mating connector and cable for corrosion or damage.
Remove and fit: Unscrew or unclip the old socket and install the new one in the reverse order. Ensure correct alignment of pins and secure mechanical fastenings without over-torquing.
Test: Reconnect the battery, power up the radio/navigation and verify reception across bands and navigation signal stability before reassembling trim.

Installation Recommendations

Use plastic trim tools to avoid damaging interior panels.
Inspect the antenna cable and mating connector for corrosion; replace damaged cables to ensure long-term reliability.
Apply a dielectric grease to connector contacts if exposed to moisture-prone environments to reduce future corrosion risk.
When reassembling, make sure the socket is seated properly and cable routing avoids sharp edges or pinch points.

Notes For Professionals

Part numbers 9650911780 and 6561HG are commonly used in workshop searches and should be verified against the vehicle’s parts catalog when performing large repair jobs. This socket is suitable for use by trained technicians and competent DIYers experienced with vehicle electrical systems.

Antenna Citroën C2 C3 9653389980 6567W7

Sun, 15 Feb 2026 03:01:21 +0000

Antenna for Citroën C2 and C3 vehicles

This replacement roof antenna is a direct-fit solution for Citroën C2 and C3 owners and professional workshops looking to restore reliable AM/FM reception. Supplied with the commonly referenced OEM codes, the unit is designed for straightforward installation and provides stable reception for factory and aftermarket head units. Ideal for mechanics and DIY enthusiasts who search by part number (e.g. 9653389980, 6567W7, 6561W5), this antenna brings back clear radio performance lost to physical damage, corrosion, or connector failure.

Technical Information

Manufacturer: Stellantis (Citroën / Peugeot)
Model: Citroën C2, Citroën C3
Product Codes: 9653389980, 6567W7, 6561W5
Other Numbers: NFP

Function

The antenna receives terrestrial AM and FM radio signals and transmits them to the vehicle’s radio via a coaxial lead. On some vehicle configurations the antenna assembly may include a mast only; on others it can contain an amplifier module or sealed connector inside the base. Proper grounding and a tight weather seal are essential for noise‑free reception.

Common Failure Modes And Why It Fails

The antenna typically has a long service life but can fail for a few recurring reasons: corrosion at the base or connector due to water ingress, mechanical damage to the mast from car washes or impacts, broken internal cable or connector fatigue, and degraded seals that allow moisture to reach contacts. Symptoms include weak or intermittent reception, static, loss of stations, or visible damage to the antenna mast or base.

Installation Recommendations

Installation is straightforward for experienced technicians and competent DIYers. Typical steps:

Remove The Antenna Mast By Unscrewing The External Whip Or Remove The Interior Retaining Nut Under The Headliner If Applicable.
Protect The Headliner And Trim When Accessing The Nut; Carefully Lower The Headliner Section If Required To Reach The Fastener.
Disconnect The Coaxial Connector From The Antenna Base; Inspect The Connector And Cable For Corrosion Or Damage.
Fit The New Antenna, Ensure The Rubber Gasket/Seal Sits Correctly, And Tighten The Retaining Fastener Securely But Without Over‑Tightening.
Apply A Small Amount Of Dielectric Grease To The Electrical Connector To Help Prevent Future Corrosion; Reinstall Interior Trim And Test Radio Reception.

Follow Manufacturer Repair Manual Access Procedures For Interior Trim Removal To Avoid Damage. After Replacement, Verify Reception Across Multiple Frequencies And Check For Water Tightness Around The Base.

Notes For Buyers

Many customers search using OEM part numbers, so the codes listed above are useful when confirming fitment. This antenna is aimed at Citroën C2 and C3 models; confirm model fitment by matching the referenced part numbers with the vehicle’s original equipment documentation before ordering.

Antenna Module Peugeot 307 CC 9652016980 6561R5

Mon, 02 Feb 2026 03:00:44 +0000

Antenna impedance module, impedance adapter for Peugeot 307 CC

Restore proper radio performance in your Peugeot 307 CC with this Antenna Impedance Module (OE 9652016980 / 6561R5). Designed for professional autoshops and DIY mechanics, this impedance adapter ensures correct matching between the vehicle antenna and the head unit to reduce signal loss, minimise noise and improve FM/AM reception. Often searched by product numbers 9652016980 and 6561R5, it is a compact and direct solution when antenna-related reception problems appear.

Key Benefits

Ensures correct impedance matching between antenna and radio to reduce reflections and signal loss.
Direct fit for the Peugeot 307 CC antenna system — quick replacement for worn or faulty modules.
Improves reception quality and reduces intermittent reception, static and weak stations.
Compact construction with vehicle-specific connector for straightforward installation.

Technical Information

Manufacturer: Stellantis / Peugeot
Model: Peugeot 307 CC
Product Codes: 9652016980
Additional Numbers: 6561R5

Recommended Installation

Ideal for experienced technicians and competent DIYers. Typical replacement steps:

Prepare: Park on level ground, switch off ignition and, as a precaution, disconnect the negative battery terminal to avoid short circuits when handling connectors.
Access: Remove the rear trim/headliner or antenna cover to reach the antenna base or amplifier module—depending on the antenna installation on the 307 CC.
Disconnect: Carefully unplug the antenna connector and any retaining clips. Note connector orientation for correct reassembly.
Replace: Fit the new impedance module, ensure secure connector engagement and proper seating; use a small amount of dielectric grease on contacts if available to reduce future corrosion.
Test: Reconnect the battery, switch on the radio and verify improved reception on several stations before refitting trim panels.
Finish: Reassemble interior panels and check for rattles or pinched wiring.

Most Common Failure Reasons

Moisture Ingress And Corrosion: Water penetration at the antenna base or connector corrodes contacts and degrades the module.
Mechanical Damage: Impact or forced removal of the antenna mast can damage the adapter or connector pins.
Connector Wear And Oxidation: Oxidized contacts increase resistance, causing intermittent reception or complete signal loss.
Age-Related Electronic Degradation: Internal components can fail over time, especially in vehicles exposed to harsh environments.
Electrical Disturbances: Lightning strikes, jump-start faults or poor grounding may damage the module.

If your Peugeot 307 CC is showing weak, intermittent or noisy radio reception and the antenna and head unit are known to be functional, replacing the impedance module identified by OE 9652016980 / code 6561R5 is a targeted repair that often restores reliable performance. Order now to get the correct part quickly and minimise workshop downtime.

Antenna Peugeot 207 9651423580 6561GW 6561W5

Thu, 15 Jan 2026 03:01:23 +0000

Antenna for PEUGEOT 207 cars

Part description

We offer a used car antenna intended for the Peugeot 207. It is a part from the category of electrical components (car radio accessories) that is used to receive a radio signal. If you’re dealing with poor reception, a cracked or loose design, or damaged antenna connectors or wiring, replacing it with the correct part according to the part number is usually the fastest way back to full functionality.

When choosing, we recommend following the product codes listed below in particular – for these parts, matching the number is the surest guide.

Technical information

Manufacturer: Stellantis (Citroën / Peugeot)
Model: Peugeot 207
Other numbers: 6561TS, 6561W

Product codes

Product codes: 9651423580, 6561GW, 6561W5

Installation recommendations

Generally/typically applies to car antenna replacement (exact steps may vary depending on specific car design and type of antenna system).

1) Before assembly

Check that the part codes (9651423580, 6561GW, 6561W5) and possibly other markings (6561TS, 6561W) match.
Compare the connectors and their mechanical design with the old part (shape, securing, cable length/type, attachment).
Inspect the part for cracks, gasket/grommet damage (if included), contact oxidation and mechanical deformation.

2) Necessary tools and materials

Basic set of hand tools (screwdrivers/bit attachment depending on design)
Tool for removing interior plastics/upholstery (plastic crowbar)
Electrical contact cleaner, clean cloth
Insulating tape or shrink tubing (depending on the condition of the cabling)

3) Step-by-step assembly procedure

Turn off the ignition and disconnect the battery to be safe (this is normally recommended for electrical parts).
Ensure access to the antenna and its wiring – remove the necessary covers/panelling so as not to break anything.
Disconnect the antenna connector(s) and any power supply (if included in the design).
Unfasten the antenna according to the specific design (nuts/screws/mount).
Remove the old part and check the condition of the mating surfaces, grommets and wiring.
Clean the contacts and the area around the mounting point; solve possible oxidation with contact cleaner.
Install the new antenna in its original position and seat it so that it fits properly and nothing is pinched.
Tighten the fastening with feeling (without pulling – there is a risk of damage to the plastics or the thread).
Reattach the connector(s) and check that the connector locks properly.
Return the removed covers/trims and check that there are no dents or scratches.
Connect the battery and turn on the ignition.
Verify radio function and reception stability.

4) Post-assembly checks and test drive/function verification
- Test the reception on several stations (FM/AM depending on the equipment) and check that the reception does not change when handling the wiring.
- After a short ride, verify that there are no signal drops and that everything is mechanically sound.
5) The most common assembly mistakes + how to avoid them
- Part exchange (different design/connector): always compare codes and physical design before assembly.
- Unsnap connector: after connecting, gently pull on the connector to verify the lock.
- Pinched wiring when installing the trim: run the cables in the same route as originally and check the passages.
- Oxidation of contacts: clean the connectors and use contact cleaner if needed.
Reasons why the part is damaged
- Mechanical damage (impact, vandalism, caught during washing/parking).
- Influence of weather – aging of plastics and seals, penetration of moisture and subsequent corrosion of contacts.
- Loose mounting and vibrations that gradually damage the cable or connector.
- Unprofessional disassembly – torn cable, damaged connector locks or cracked covers.

Antenna with GPS rod Citroën Peugeot 9819669580 9806305680

Fri, 09 Jan 2026 03:01:00 +0000

FM and GPS antenna for various CITROEN PEUGEOT car models

Part description

The antenna with GPS rod is designed for Citroën and Peugeot cars and is used to receive FM radio and GPS signal. If you are dealing with weak radio reception, signal outages or non-functioning navigation, replacing the antenna is usually a quick and effective solution without unnecessary interventions in other parts of the audio/navigation system.

The part is suitable for mechanics and home repairs – when choosing, it is most often searched for by the product number, which must agree with your original part.

Technical information

Manufacturer: PSA Citroën Peugeot
Model: not specified
Other numbers: 9819667580, 9819667880, 9819668080, 658772

Product codes

Product codes: 9819669580, 9806305680

Installation recommendations

Before disassembly, compare the part numbers on the original antenna with the codes listed.
During assembly, make sure the rod is properly seated and tightened to prevent water penetration and subsequent corrosion of the contacts.
Check the condition of the connectors and wiring – a loose or oxidized connection often causes signal fluctuations.
After installation, verify the function of FM and GPS reception (signal stability, location finding speed).

Reasons why the part is damaged

Mechanical damage to the rod (dishwasher, low entry, vandalism, breakage).
Leakage into the base of the antenna and subsequent corrosion of the contacts.
Aging of the material and degradation of the seal due to UV radiation and temperature changes.
Loose or oxidized connectors causing FM/GPS signal dropouts.

Antenna wiring Peugeot 308 T9 98189731ZD

Fri, 09 Jan 2026 03:01:00 +0000

Antenna wiring for Peugeot 308 T9 car

Part description

The Peugeot 308 T9 antenna wiring is an important part for the correct transmission of the antenna signal to the car radio. If you are dealing with reception drops, noise or signal fluctuations, a damaged antenna cable is often the cause. Search by part number to easily verify that you are ordering the correct wiring.

The part falls into the category of car antennas / car radios and accessories and is intended for electrical installation repairs related to antenna wiring.

Technical information

Manufacturer: PSA Citroën Peugeot
Model: Peugeot 308 T9
Other numbers: not specified

Product codes

Product codes: 98189731ZD

Installation recommendations

Before installation, check whether the connectors and cables match the original wiring (shape, securing, cable length).
Proceed carefully during disassembly so as not to damage the plastic handles and grommets that guide the cabling.
Make sure the connectors are seated correctly – even a slightly loose connection can cause deteriorated signal reception.
After assembly, check the function of radio reception in different bands (FM/AM depending on equipment).

Reasons why the part is damaged

Mechanical damage to the cable when disassembling interior parts or the car radio.
Broken or loose connectors due to vibration or improper handling.
Moisture and corrosion in the joints, which worsens contact and signal attenuation.

Antenna Citroën Peugeot 9655613780 6561Z9 6561W5

Wed, 07 Jan 2026 03:03:10 +0000

Antenna for CITROEN C4 C5 C8 PEUGEOT 308 and others

The antenna for Citroën and Peugeot cars is designed to ensure high-quality reception of the radio signal and the original appearance of the car. Thanks to PSA production codes, customers often search for it by part number, making it easy to quickly find the right replacement for a damaged or missing antenna.

Technical information
Manufacturer: PSA Citroën Peugeot
Model: especially suitable for Citroën C4, C5, C8 and Peugeot 308, 807 (and other selected PSA models)
Product codes: 9655613780, 6561Z9
Other numbers: 6561W5

This antenna is intended for mounting on the roof of the vehicle in the place of the original attachment. Thanks to the identical PSA codes, it is suitable as a replacement for an original part that has been damaged, for example, in a dishwasher, vandalism or old age. A properly functioning antenna will ensure better radio reception, which drivers who spend a lot of time on the road will especially appreciate.

Installation recommendations
– Before mounting, check that the product numbers match the original antenna.
– Install on a clean and dry roof surface to prevent leaks.
– When removing the old antenna, be careful not to damage the thread or wiring under the ceiling.
– Lightly clean the antenna contact and thread and, if necessary, treat with a suitable contact spray for better conductivity.
– Tighten the antenna with sensitivity – too much tightening can damage the thread or seal, too loose fitting can cause vibrations and leakage.
– After installation, test radio reception on multiple stations, ideally in different locations, to verify proper operation.

This part is suitable for car mechanics and DIYers who need a quick and functional replacement of the original roof antenna for Citroën and Peugeot cars.

Antenna Citroën Peugeot 9655613780 6561Z9

Wed, 07 Jan 2026 03:01:48 +0000

Antenna for CITROEN C4 C5 C8 PEUGEOT 308 and others

The antenna for Citroën and Peugeot cars is suitable for replacing the original part on Citroën C4, C5, C8 and Peugeot 308, 807 and other related types. Thanks to the original design, it ensures reliable reception of the radio and often also other functions (for example, communication of the central unit with the radio system) without interference and outages. When installed correctly, it fully replaces the original mounted antenna and contributes to the problem-free use of the car radio even on longer routes.

Technical information
Manufacturer: PSA Citroën Peugeot
Model: roof antenna radio (selected Citroën / Peugeot models)
Product codes: 9655613780, 6561Z9
Other numbers: 6561W5, 6587J0

Usage and compatibility
This roof antenna is intended for Citroën and Peugeot cars, where it replaces a damaged or non-functional antenna, or an antenna with poor signal reception. It is typically mounted in the rear part of the roof of the car, where the coaxial cable to the car radio is routed. Thanks to identical product codes, the part can be easily searched and compared with the number on the original antenna.

Suitable models (approximate):
– Citroën C4
– Citroën C5
– Citroën C8
– Peugeot 308
– Peugeot 807
– and other selected models of the PSA concern with the same part number

Part condition
This is a used original part from disassembly, suitable for replacing a damaged or non-functional piece. Compared to non-original replacements, it tends to fit the body better and has more stable radio reception.

Installation recommendations
– Before mounting, check that the part number (9655613780, 6561Z9, 6561W5, 6587J0) matches the original antenna.
– When disassembling the old antenna, disconnect the battery to avoid a short circuit when handling the wiring.
– Remove the interior ceiling trim at the antenna location to access the fixing nut and connector.
– Repeat the original mounting method: screw the antenna from the outside of the roof and secure it with a nut from the inside. Tighten carefully to avoid deformation of the roof sheet or damage to the thread.
– Check the sealing rubber / pad under the base of the antenna so that there is no leakage into the interior. In case of wear, it is advisable to replace or reseal the seal.
– Carefully plug the coaxial connector into the harness leading to the car radio so that the signal is not interrupted.
– After assembly, reconnect the battery and test the reception of the radio on several frequencies, possibly even while driving.

Antenna Citroën Peugeot 9650911180 6561Y1

Mon, 24 Nov 2025 03:04:24 +0000

Antenna for CITROEN PEUGEOT cars with whip

Antenna Citroën Peugeot 9650911180 6561Y1 is intended for Peugeot and Citroën cars, which require high-quality radio reception and reliable function of the original car radio. Thanks to the design with a whip, it is a classic and proven solution that works well even in poor signal reception conditions.

This part is suitable for customers who want to replace a damaged, broken or corroded antenna and return the car to a full function of radio reception without dropouts and noise. Used original car parts are often a better choice than cheap one-size-fits-all replacements – they keep the car’s original look, fit in the original location and usually offer more stable signal reception.

Technical information:
Manufacturer: PSA (Citroën / Peugeot)
Model: whip antenna for selected Citroën and Peugeot models
Product codes: 9650911180, 6561Y1
Other numbers: 6561A0, 6561W5

Typical use is in models such as Peugeot 307, Peugeot 407, Citroën C5 and other related cars of the PSA concern, where this type of antenna was installed from the factory. It is always a good idea to check that the part number matches the original part from the car to ensure proper compatibility and fitment.

Installation recommendations:
– Before removing the old antenna, disconnect the battery to avoid a possible short circuit when handling the wiring.
– Dismantling of the antenna base usually takes place from the inside of the roof (under the soffit). Be careful not to damage the upholstery.
– Check the seal under the base of the antenna, clean or replace it if necessary to prevent water from entering the interior.
– When installing a new antenna, tighten the fixing nut with feel – over-tightening can damage the roof plate or the thread.
– Check the integrity of the coaxial cable and the connector, clean the contact before inserting.
– After mounting the antenna, connect the battery and test radio reception on multiple frequencies and in different locations. If the reception is stable and without significant noise, the installation is done correctly.

This antenna is a suitable replacement for the original part and will help to restore the full function of the car radio while maintaining the original appearance of the car.

Antenna Citroën Peugeot 9646131880 6561Q3 6561GP 6561W7

Tue, 11 Nov 2025 03:06:10 +0000

Antenna for PEUGEOT 206 and 307 and CITROEN C5 station wagon, XSARA

Original PSA roof antenna for Citroën and Peugeot – used, fully functional dismantled part. A suitable replacement for weak radio reception, a broken rod or an oxidized socket. This is an OE antenna so it fits and works exactly like the original factory part. Many variants are already NFP (discontinued production) at PSA, so an original used part is an ideal choice.

Key benefits
– Original PSA quality and exact compatibility
– Stable FM/AM reception, without the need to modify the bodywork
– Plug & play replacement according to OE numbers
– Also suitable for professional repairs – robust design of the base

Technical information
– OE/Ref. numbers: 9646131880, 6561Q3, 6561GP, 6561W7 (mutually interchangeable depending on car equipment)
– Type: AM/FM roof antenna, antenna base with roof pass through
– Amplifier: some versions have an integrated amplifier powered by a coaxial cable (so-called phantom) – refer to the OE numbers and photos of the specific piece
– Connector: coaxial (type may vary by model/year; check photos)
– Location: center of the rear part of the roof (depending on the model)
– Color: black
– Condition: used original part, functional, normal cosmetic signs of use; see the photos for the exact scope of delivery (the antenna rod is included only if it is in the photos)

PSA compatibility
– Peugeot 206 (approx. 1998–2012; depending on equipment and OE number)
– Peugeot 307 I (approx. 2001–2005/2007; hatchback/SW/Break)
– Citroën C5 I (approx. 2001–2004; sedan and Break/station wagon)
– Citroën Xsara (approx. 1997–2005; depending on equipment)
Note: PSA used multiple antenna variations (with/without amplifier, different cable lengths and connectors). It is best to follow the OE numbers listed and compare the shape of the base and connector to your part.

Installation recommendations
– Before mounting, clean the landing surface on the roof for high-quality grounding of the antenna
– For versions with an amplifier, check the power supply via the coaxial cable from the car radio (or use a phantom power supply)
– Tighten appropriately so as not to damage the seal or paintwork

Also searched for
– Citroën/Peugeot roof antenna, antenna base, antenna base, OEM 9646131880, 6561.Q3, 6561.GP, 6561.W7, NFP

How to verify the correctness of the part
– compare the OE number from your part or by VIN
– visually compare the shape of the base and the type of connector with the photos in the menu

This description is intentionally rich in OE numbers and keywords to make your search easier and ensure that you get the exact compatible genuine PSA part.