High-frequency tweeter speaker designed as a direct replacement for Peugeot 206 audio systems. This compact driver restores clear, detailed highs and vocal presence that are often lost when original tweeters age or are damaged. Ideal for professional workshops and DIY mechanics, the unit is frequently searched by its OEM numbers, making it easy to find and fit. Compatible with factory speaker crossovers and amplifiers when the OEM part codes below match the vehicle.

Key Benefits

Improves vocal clarity and instrument detail in the upper frequency range. Simple mechanical fitment for quick service times in door trim, dash or A-pillar locations depending on original vehicle layout. Helps eliminate distortion, rattles and reduced output caused by failed tweeter diaphragms or voice coils.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Peugeot 206
• Product Codes: 9640322880, 9666384580
• Other Numbers: 6562G9, 6262A8

Compatibility And Fitment

Primary fitment is Peugeot 206 (various body styles and equipment levels). Use the OEM product codes above to confirm direct replacement fitment for the vehicle. This tweeter is intended to replace the original high-frequency driver without modification when the part numbers match.

Function And Typical Failure Causes

Tweeters reproduce the high-frequency portion of the audio spectrum, adding clarity to voices, cymbals and other high-frequency content. Common causes of failure include:

• Overload or Distortion: Excessive volume or amplifier clipping can burn the voice coil.
• Moisture Ingress: Water or condensation in door/a-pillar areas leads to corrosion and membrane damage.
• Physical Damage: Impact during door removal/installation or panel replacement can deform the dome.
• Ageing And Wear: Long-term heat and UV exposure degrade diaphragms and adhesives.
• Electrical Faults: Faulty crossover components or amplifier issues can reduce output or damage the tweeter.

Installation Recommendations

Recommended for installation by trained technicians or experienced DIYers. General replacement steps:

• Remove Interior Trim: Carefully remove the door panel, A-pillar trim or dash grille to access the tweeter. Use appropriate trim tools to avoid damaging clips.
• Disconnect Power Sources As Needed: For safety, isolate the audio system (turn ignition off). Disconnecting the vehicle battery is optional for speaker replacement but recommended if you will work near airbags or vehicle electronics.
• Unplug Connector: Disconnect the tweeter electrical connector. Note connector orientation and clip positions for reassembly.
• Remove Mounting Hardware: Unscrew or unclip the tweeter from its mounting bracket or housing.
• Install New Unit: Fit the replacement tweeter, secure mounting hardware and reconnect the electrical connector with correct polarity.
• Test Audio: Before reassembling trim, test the speaker at moderate volume to verify correct operation and polarity. Refit trim panels ensuring no pinched wiring.

Why Replace The Tweeter

Replacing a failed tweeter restores the high-frequency balance of the audio system and prevents listener fatigue caused by distortion or missing frequencies. Replacing only the failed driver is cost-effective compared with full speaker set replacements when other speakers are still in good condition.

Search And Identification Tips

Customers and workshops commonly search by OEM codes 9640322880, 9666384580, 6562G9 and 6262A8. Including these numbers in your search will increase the chance of finding the exact replacement part. Use clear photos of the existing tweeter and connector when in doubt.

Notes For Workshops

Keep replacement tweeters in stock by common OEM number to minimize vehicle downtime. When replacing speakers on vehicles with factory amplifiers or active crossovers, verify amplifier settings and polarity to avoid damage to the new driver.

Original Tweeter for Citroën C-Crosser and Peugeot 4007. Suitable for all doors for standard audio systems-does not fit on cars with Audio 3 and Multivision equipment. An ideal replacement for a non -functional or distorting tweeter that will return net heights, space and clarity of sound to your interior.

The part is designed as a direct replacement with the original attachment and a connector, so the replacement takes place without modifications. Thanks to the same shape of the collar and locks, it fits into the original holder in the triangle by the mirror (Sail panel) on the front and rear doors at the equipment without a premium multimedia unit.

Compatibility and tips for assembly
– Compatible with standard audio equipment (without audio 3 / multivision).
– Replace procedure: Carefully remove the plastic triangle by the mirror, disconnect the tweeter connector, release the original speaker (latch/screw), attach the new part, plug the connector and try the function before installing the lining. Work usually takes units of minutes per piece.
– To verify the suitability, we recommend comparing the part number on your old speaker with the codes below or verify by VIN.

What is the tweeter for and why is left
The tweeter processes the highest frequency band (height) and complements the main door speaker. Typical symptoms of the failure are missing heights, cracking or intermittent sound. This is due to mechanical damage to the membrane or tired switch/protection in the body of the tweeter. The replacement is fast and represents a cost -effective repair with an immediate effect on listening quality.

technical information

• manufacturer: dog/Citroën • Peugeot (OEM)
• Model: Citroën C-Crosser (about 2007–2012), Peugeot 4007 (about 2007–2012)
• product codes: MR986377, 6563T3
• Other numbers: 6563.t3, MR 986377

Why choose the original part
The original tweeter preserves the factory character of the sound and fits smoothly to the original location without adjusting wiring or attachment. Easy assembly, reliable compatibility and certainty of the right size make this option the fastest way to a fully functional audio system.

Original door speaker for Citroën C -Crosser and Peugeot 4007. These are the OEM part of the PSA concern with numbers 8720A017, 6562R8 and 1612537280.

Designed for all doors (front and rear) models, except for vehicles equipped with above -standard audio systems “Audio 3” and “Multivision”. For easy compatibility verification, compare the part number on your original speaker and the shape of the connector.

Why this part changes: door speakers in older cars often leave due to moisture in the door, fatigue material or mechanical damage to the membrane. This is manifested by greater volume, loss of bass or complete outage of one channel. Replacing for the original speaker restores the original sound and reliability.

How is the exchange (general recommendation):

• Remove the door fill (screws, plastic buckles) and carefully disconnect the bowden and wiring.
• unscrew the old speaker, disconnect the connector and check the seal and foil against moisture.
• Install a replacement speaker in the original mounting points, connect the connector and perform a short audio test.
• Carefully return the door fill and check that nothing does not resonate.

Key advantages of the original episode:

• OEM Quality and accurate attachment, including the correct fit depth.
• Compatibility with original vehicle cabling – without modification.
• recovery of factory sound without compromise.

Note to condition: The original part used can carry common cosmetic signs of use that do not affect the function. Always compare the part numbers and the connector with your car to be sure.

technical information

• Manufacturer: PSA (Citroën/Peugeot)
• Model: Citroën C -Crosser; Peugeot 4007 (door speaker, except “Audios 3” and “Multivision”)
• product codes: 8720A017; 6562r8; 1612537280
• Other numbers: Not specified