This replacement antenna is designed for Citroën and Peugeot vehicles and corresponds to common OEM references used by Stellantis. Ideal for professional workshops and experienced DIY mechanics, the unit restores reliable radio reception and a factory-fit appearance. Many customers search directly by product number (e.g. 9674768680, 9810547980, 658724) — these codes are included below to help you find the correct part fast.

Features and Function

The antenna assembly provides stable AM/FM radio reception and a secure roof mounting. The assembly typically includes the mast/base, coaxial connection and roof sealing. On some vehicle versions the antenna base is combined with an amplifier module; compatibility depends on the original equipment fitted to the vehicle.

Suitable For

• Citroën C3
• Citroën C3 Picasso
• Citroën C4 Picasso
• Peugeot 308

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Antenna / Roof Antenna
• Product Codes: 9674768680, 9810547980, 658724, 6587G4, 6587G3
• Additional Numbers: 6580J0, 6561JT, 6561JS

Installation Recommendations

Recommended tools: Torx/Spline sockets, trim removal tools, adjustable wrench, sealant for roof fittings and dielectric grease for connectors. Typical replacement steps:

• Disconnect the negative battery terminal before starting the job to avoid short circuits.
• Remove interior roof trim or headliner section as required to access the antenna base from inside the vehicle.
• Unscrew the external mast (if fitted) and unbolt the antenna base retaining nut.
• Disconnect the coaxial connector and any power or amplifier plugs carefully to avoid damaging clips or wiring.
• Clean the roof sealing surface, fit the new antenna with new gasket/sealant as required, connect the coax and electrical connectors and tighten the retaining nut to the correct torque.
• Reinstall trim/headliner, reconnect the battery and verify radio reception and any amplifier function.

If you are unsure about removing interior trim or working at roof level, have the replacement performed by a qualified technician.

Why The Part Commonly Fails

Common causes of antenna failure include water ingress at the base leading to corrosion, oxidation of the coaxial connector, mechanical damage from impacts or vandalism, and wear of internal cables. In vehicles with an integrated amplifier, electrical faults or moisture can also cause loss of reception. Failure symptoms are weak or intermittent radio signal, static, or complete loss of reception on AM/FM bands.

When replacing the antenna, check the coaxial cable and connector condition and ensure the roof sealing is restored to prevent future water entry.

Product Numbers For Search: 9674768680 | 9810547980 | 658724 | 6587G4 | 6587G3 | 6580J0 | 6561JT | 6561JS

This handsfree microphone is a direct-fit interior microphone designed for Citroën, Peugeot and DS models. It restores clear voice pick-up for Bluetooth phone calls and voice commands, making it an essential replacement part for workshops and experienced DIYers. Compatible with popular OEM part numbers, this microphone improves call intelligibility and reduces background noise when installed correctly.

Function And Typical Location

The microphone captures the driver’s voice for the vehicle’s handsfree and voice recognition systems. It is typically mounted in the overhead console/headliner area, often integrated with the interior light unit or sunroof console. Connection is via a small multi-pin plug into the vehicle wiring harness.

Compatibility

Compatible with selected Citroën, Peugeot and DS models, including (but not limited to):

• Citroën C-Elysée
• Citroën C3 Picasso
• Citroën C4 II / C4 Picasso
• DS4
• Peugeot 301
• Peugeot 308 (including T9)
• Peugeot 3008 I
• Peugeot 5008 I

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot / DS)
• Model: Microphone For Handsfree Systems
• Product Codes: 9656164180; 9812377180; 9812373180; 6563HS
• Other Numbers: 6563.HS

Installation Recommendations

Recommended for fitment by professional technicians or skilled DIYers with appropriate trim tools. Typical replacement steps:

• Disconnect the battery and wait the manufacturer-recommended time before working near the roof area to avoid electrical short circuits and reduce the risk related to restraint systems.
• Carefully remove the overhead console or headliner trim using plastic trim tools to avoid damage.
• Unplug the microphone connector from the harness and note routing of the cable.
• Fit the new microphone, reconnect the plug securely and reassemble trim in reverse order.
• Verify correct operation by making a handsfree call and checking voice clarity and signal level. Inspect connector seating and cable routing for pinched wires.

Why This Part Most Commonly Fails

• Moisture Ingress: Water leaks or condensation can corrode contacts or damage the microphone element, causing muffled or no sound.
• Connector Corrosion Or Poor Contact: Oxidation or loose connectors lead to intermittent audio or dropouts.
• Physical Damage: Impact during removal/installation or from objects contacting the headliner can damage the unit.
• Aging And Foam Deterioration: Acoustic foam or mesh can degrade over time, reducing sensitivity and introducing noise.

Practical Notes For Mechanics

Search by OEM part number (e.g., 9656164180, 9812377180, 9812373180, 6563HS) to quickly locate the correct unit for a vehicle. When diagnosing poor call quality, check the microphone connector and wiring before replacing the part. Replacement is typically straightforward but requires careful trim removal to avoid damaging interior panels or airbags.

Original car radio Continental RD4N1M with CD / MP3 for Peugeot 308. The unit comes from the dog’s cars and bears the designation 96662671xh / 16077683xh, service code 6574QR. The HXH – Warm Silver front panel fits into the interior of the first generation 308 (T7). Thanks to the OEM design you have seamless integration with the vehicle and quality sound without unwanted compromises.

Functionally, it is a standard PSA RD4 unit with CD playback and MP3 support, FM/AM tuner with RDS and full cooperation with original multifunction display and steering wheel control. The radio uses the OEM PSA connector (ISO Quadock), so assembly into a compatible car is straightforward.

Installation and pairing: Disconnect the battery before replacement. After mechanical insertion and connection of the radio, it is necessary to “pass” the unit to the car by diagnostics (vin pairing/telecoding) using Diabox/Lexia/PP2000. Without this step, the radio in the dog typically beeps and cannot be fully used. After pairing, we recommend checking the language, data and time settings on the on -board display.

Compatibility: Designed primarily for Peugeot 308 (T7, approx. 2007–2013) with the same connector and color design of the panel. Before purchasing, please verify the part numbers and the appearance of the front panel with your original radio.

technical information

• Manufacturer: Continental (PSA)
• Model: RD4N1M MP3, HXH – Warm Silver
• product codes: 6574QR
• Other numbers: 96662671xh, 16077683xh

Why choose the original part: full compatibility with wiring and BSI, maintaining the steering wheel control and displaying information on the OEM display, verified reliability within the PSA platform. It is a used original part – conventional small cosmetic signs of use may occur, functionality is given by proper assembly and subsequent pairing in diagnostics.

Selection tip: The safest thing is to follow the catalog numbers (6574QR, 96662671xh, 16077683xh) and visual coincidence. If you are unsure, compare the connectors and the color of the HXH – Warm Silver panel with your original radio.

Original Continental RD4N1M CD radio suitable for Peugeot 308 vehicles. This unit is often searched by part numbers 96662671XH, 16077683XH and 6574QR, making it easy to find for workshops and DIY mechanics. The familiar OEM layout ensures correct fitment and integration with the vehicle’s dash and wiring harness. Ideal for replacing a faulty head unit while keeping factory look and basic functionality.

Technical Information

• Manufacturer: Continental
• Model: Peugeot 308
• Product Codes: 96662671XH, 16077683XH, 6574QR
• Other Numbers: RD4N1M

Key Notes

This is a CD-based OEM radio module. It retains the original control ergonomics and chassis dimensions used in compatible Peugeot 308 dashboards. The unit’s faceplate color is Warm Silver (HXH), matching many factory interiors. Important: After fitting, the radio must be coded/programmed to the vehicle with a compatible diagnostic tool to restore full functionality and CAN bus communication.

Installation Recommendations

Recommended steps for safe replacement:

• Disconnect the negative battery terminal before starting to avoid short circuits and ECU faults.
• Use plastic trim tools to remove dash panels and avoid damaging clips or trim surfaces.
• Unscrew and slide out the original radio; carefully disconnect the antenna, wiring harnesses and any auxiliary connectors.
• Compare connectors and mounting brackets, then install the replacement unit and reassemble in reverse order.
• Perform radio coding/programming with a Peugeot/Citroën compatible diagnostic tool (e.g., DiagBox) or a multi-brand scanner that supports radio coding—this step is required for correct integration with vehicle electronics.
• Check fuses and test basic functions (radio reception, CD playback, display, steering wheel controls if applicable) before final reassembly.

Why This Part Fails Most Often

• Mechanical wear of the CD mechanism and moving parts causing read errors or jamming.
• Moisture ingress or dirt accumulation leading to corrosion on connectors or internal circuit boards.
• Electrical issues such as blown fuses, poor ground connections, or voltage spikes damaging electronics.
• Software glitches or loss of radio coding after battery replacement or replacement without proper programming.

Suitable for professional workshops and competent DIY mechanics who can follow safe removal procedures and perform the required diagnostic coding. Searchable by OEM numbers 96662671XH, 16077683XH and 6574QR for quick identification when ordering or replacing units.

Looking for a dependable car radio for your Citroën or Peugeot? This Continental RD4 N1M-03 car radio is a perfect replacement unit compatible with Citroën models Berlingo, C3, C3 Picasso, C4, C4 Picasso, C8, as well as Peugeot 207, 307, 807, and Partner. It delivers excellent sound quality and reliable functionality to enhance every drive.

Note that after installation, the radio must be programmed to the vehicle using a diagnostic tool to ensure full compatibility and operational performance. It is highly recommended to have this procedure performed by a professional to properly integrate the radio into your car’s system.

Technical Information

• Manufacturer: Continental
• Model: RD4 N1M-03
• Product Codes: 98032842XT, 16112066XT
• Additional Numbers: Please verify that the product codes match your vehicle’s requirements before purchase.

This radio’s compatibility with multiple Citroën and Peugeot models makes it a practical choice for many drivers. Enjoy your favorite music, podcasts, or audiobooks with the clear and balanced sound this unit provides. Proper installation and diagnostic programming are essential to maintain warranty conditions and optimal performance.

Take advantage of this opportunity to equip your vehicle with a quality audio component at an affordable price. Sound quality and reliability are our top priorities, which is why we offer only tested and functional products. Join the many satisfied customers who have trusted our services.

Replacement whip antenna designed for Citroën and Peugeot models, commonly referenced under codes 9658544380, 6561JQ, 6561JT and 6561JS. This roof-mounted mast antenna restores clear AM/FM reception, is simple to fit and is ideal for mechanics and DIY enthusiasts who need a direct replacement part for radio systems on Citroën C4, C4 Picasso and Peugeot 308. Use these product codes when searching to quickly locate the correct unit.

Key Features

– Roof-mounted whip (mast) design for reliable AM/FM reception.
– Direct-fit replacement for original equipment on listed models.
– Durable metal mast with threaded base for secure mounting.
– Compatible with common OE codes 9658544380 / 6561JQ / 6561JT / 6561JS.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C4; Citroën C4 Picasso; Peugeot 308
• Product Codes: 9658544380, 6561JQ, 6561JT, 6561JS
• Other Numbers: 6561JQ | 6561JS | 6561JT | 9658544380

Installation Recommendation

Intended for fitment by trained mechanics or experienced DIYers. Typical installation steps:

• Gather tools: adjustable wrench or suitable socket, trim removal tools, cleaning cloth, dielectric grease or anti-seize.
• Access the antenna base from inside the roof lining if required (some models allow external unscrewing of the mast). Remove any interior trim carefully to reach the mounting nut.
• Unscrew the old mast from the base or remove the securing nut underneath the roof liner. Inspect the base, cable connector and seal.
• Clean mating surfaces and cable contacts. Apply a small amount of dielectric grease to the connector to prevent corrosion.
• Fit new sealing washer or gasket if available, screw the new mast into the base or secure the base with the nut. Do not overtighten—ensure a firm, watertight fit.
• Reinstall interior trim, test radio reception and check for water ingress after a wash or rain.

Why The Part Commonly Fails

• Mechanical Damage: Mast frequently bent or broken by automated car washes, low garage entrances, branches or vandalism.
• Corrosion: Thread and connector corrosion from long-term exposure to moisture reduces electrical contact and makes removal difficult.
• Seal Degradation: Deteriorated rubber gasket allows water ingress, leading to connector corrosion and poor reception.
• Poor Contact: Loose or oxidised connector at the base causes intermittent or weak signal.

Notes: When replacing the antenna, always check the condition of the base, cable and sealing washer. Replacing the gasket when fitting a new mast prevents future water leaks. After installation verify radio reception across AM and FM bands and ensure the mount is secure to avoid vibration noise.

This antenna is designed specifically for Citroën and Peugeot vehicles, including popular models such as Citroën C4, C4 Picasso, C8, and Peugeot 807. It ensures optimal reception for your vehicle’s radio system, providing clear and stable signal transmission even in areas with weak signals.

The antenna is often sought after by professional auto mechanics and car enthusiasts performing their own repairs, largely identified by the product number 9664546280. It is a direct replacement part, compatible and easy to install, improving your in-car entertainment experience.

The antenna’s function is critical for receiving radio frequencies and maintaining communication quality in your vehicle. Common causes for antenna failure include physical damage, corrosion, or internal electrical faults, which can lead to poor radio performance or signal loss.

Technical Information

• Manufacturer: PSA (Peugeot Société Anonyme)
• Model Compatibility: Citroën C4, Citroën C4 Picasso, Citroën C8, Peugeot 807
• Product Codes: 9664546280, 6561JT, 6561JS
• Additional Numbers: Related OEM codes as listed by PSA

Installation involves removing the old antenna from the vehicle’s roof or relevant mount and securely fitting the new antenna in its place. Routine checks during vehicle service intervals can help identify antenna issues early, preventing radio signal interruptions.

Are you looking for a reliable solution to restore the handsfree and GSM system in your Citroën or Peugeot vehicle? Our offering includes a used Bluetooth GSM Unit compatible with a wide range of models from these brands. This part is perfect for auto mechanics and DIY enthusiasts who want to repair their handsfree telephony and GSM connectivity without costly service fees.

This unit provides smooth and high-quality connection via Bluetooth and GSM, which is essential for safe handsfree calling while driving. Its straightforward installation and dependable performance are key advantages. Thanks to compatibility with several Citroën, Peugeot, and DS models, the unit easily adapts to most vehicles in these ranges. Integrating this device into your car can significantly improve comfort and safety during phone calls on the road.

Technical Information

• Manufacturer: PSA (Citroën, Peugeot)
• Models: Citroën C-Elysée, C3 Picasso, C4 II, DS4; Peugeot 301, 308, 308 T9, 5008
• Product Codes: 9666419080, 6593G5, 6593G6
• Additional Numbers: Available based on original codes

This product is fully functional despite being used. Its installation is intuitive, making it suitable for less experienced users who prefer a DIY approach. We offer you a cost-effective repair solution while maintaining a high level of functionality and reliability for your vehicle.

Don’t wait any longer—enhance your vehicle’s comfort with our Bluetooth GSM unit designed specifically for your Citroën and Peugeot models. With this unit, your car will be fully equipped for modern communication on the go!

This genuine OE antenna (Stellantis) with part number 9674768980 is a direct-fit replacement designed for reliable radio reception in Citroën and Peugeot models. Ideal for professional workshops and DIY mechanics, the unit restores AM/FM reception quality and eliminates noise caused by damaged masts or corroded connectors. The antenna is frequently searched and ordered by its product code 9674768980 — use this number to quickly identify correct fitment.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C-Elysée, Citroën C4 Picasso II, Peugeot 208, Peugeot 301
• Product Codes: 9674768980
• Additional Numbers: None Known

Function and Characteristics

The antenna provides external roof-mounted radio reception for AM/FM broadcasts. It replaces worn or damaged aerials that cause weak signal, intermittent reception, or static. As an OE-design component, it matches the original mounting points and connector type for straightforward replacement.

Installation Recommendation

• Park Vehicle On A Level Surface And Disconnect Battery Before Starting Work.
• Carefully Remove Interior Headliner Trim Or Tailgate Trim To Access Antenna Base (Depending On Model).
• Unscrew Retaining Nut From Antenna Base And Detach Electrical Connector / Coax Cable.
• Install New Antenna, Ensure Gasket/Seal Is Correctly Positioned To Prevent Water Ingress, Then Tighten Fastener Securely.
• Reconnect Cable And Restore Trim. Test Radio Reception Before Final Assembly.
• No Electronic Coding Is Required For Standard Radio Antenna Replacement.

Why This Part Fails Most Often

• Water Ingress And Corrosion At The Base Or Connector Leading To Poor Contact.
• Physical Damage From Impacts, Car Washes, Or Broken Mast.
• Frayed Or Broken Coax Cable Causing Intermittent Or No Signal.
• Loose Fastening Allowing Movement And Progressive Wear Of The Connector.

Practical Tips

• Inspect Coax Cable And Connector For Corrosion When Replacing The Antenna.
• Replace Seals Or Gaskets If They Appear Hardened To Ensure A Watertight Fit.
• Confirm Fitment By Part Number 9674768980 To Avoid Ordering Incorrect Variants.

Suitable For Use In Professional Repairs And DIY Maintenance. Ordering By OEM Number 9674768980 Ensures Fast Identification And Compatibility With The Listed Models.

This Continental RD4N1M CD car radio is a direct-fit entertainment unit commonly used in Peugeot 308 vehicles. Designed for professional installers and DIY mechanics, the unit provides reliable AM/FM radio reception and a built-in CD mechanism in a factory-style head unit. The radio is frequently identified and ordered by product codes, so check the part numbers below when searching or replacing the original unit.

Technical Information

• Manufacturer: Continental (Stellantis OEM supplier)
• Model: RD4N1M
• Product Codes: 98032879XH
• Other Numbers: 16077683XH, 6574QR

Compatibility

Fits: Peugeot 308 (unit specified for vehicles equipped with the RD4N1M head unit). Verify the unit shape and connector type visually when replacing older or different head units.

Function And Purpose

The unit provides standard in-dash audio functions: CD playback and AM/FM radio reception in a factory-style double-DIN/1-DIN mounting depending on the vehicle bezel. It serves as the primary audio source and integrates with the vehicle’s wiring and dash controls. Color finish: Warm Silver (HXH).

Installation Recommendations

• Safety First: Disconnect the negative battery terminal before removing the original radio to prevent short circuits and protect vehicle electronics.
• Removal: Carefully remove surrounding trim panels, release the radio using the correct release keys or unscrew retaining fasteners, and pull the unit out to access connectors.
• Electrical Connections: Disconnect antenna, harness plugs and any amplifier or CAN bus connectors. Inspect connectors and wiring for corrosion or damage and clean if necessary.
• Fitting: Plug in all connectors securely, check antenna connection and seat the unit correctly in the chassis. Refit trim panels and fasteners.
• Pairing/Coding: The radio must be coded/paired to the vehicle using appropriate diagnostic equipment (dealer-level or compatible diagnostic tool) before full functionality is restored. Do not attempt to bypass coding. After coding, verify radio, steering wheel controls and any display functions.

Why This Part Fails Most Often

• Mechanical Wear: The CD mechanism is a moving-part assembly and is prone to wear or failure over many years or with heavy CD use.
• Moisture And Corrosion: Water ingress or humidity can corrode connectors, the tuner or internal electronics, causing intermittent faults or total failure.
• Electrical Issues: Loose connectors, blown fuses, or faults in the vehicle’s power supply can prevent the unit from powering up.
• Software/Locking: Loss of coding data after battery disconnection or replacement can render the radio locked until it is re‑coded via diagnostics.

Ordering Tip: This radio is frequently searched by its product numbers 98032879XH, 16077683XH and 6574QR — include those codes in your search to locate compatible units quickly.