Replace a worn or non‑working factory radio with an original Siemens VDO CD unit designed for many Citroën and Peugeot models. This OEM radio preserves the factory appearance and retains compatibility with the vehicle’s wiring and controls while restoring CD playback and standard radio functions. Ideal for professional workshops and experienced DIY mechanics who need a direct-fit replacement identified by part numbers commonly used in searches.

Key Features

• Original Siemens VDO construction tailored for Citroën/Peugeot dashboards.
• Integrated CD player with radio tuner and standard PSA connectors.
• Direct replacement for vehicles using part codes 964514597700, 6564RT, 6564V.
• Maintains factory look and steering wheel control compatibility where originally fitted.

Fitment / Compatible Models

Commonly fitted to the following models (model generation indicated where relevant): Peugeot 307 I, Peugeot 807, Citroën Berlingo II, Citroën C2, Citroën C3 I, Citroën C8, Citroën Partner II. Compatibility depends on vehicle trim and preinstalled harness; the unit corresponds to the PSA/Stellantis radio family identified by the listed part numbers.

Technical Information

• Manufacturer: Siemens VDO (Original Equipment for Citroën/Peugeot)
• Model: OEM CD Radio For Citroën/Peugeot
• Product Codes: 964514597700, 6564RT, 6564V
• Additional Numbers: NFP

Installation Recommendations

• Disconnect the vehicle battery before starting work to avoid short circuits and prevent damage to electronics.
• Remove trim panels and use proper radio keys or tools to extract the radio cage without damaging the dash.
• Carefully disconnect antenna, power/speaker harnesses and any auxiliary or steering control connectors.
• After mechanical installation, the radio must be coded/programmed to the vehicle using diagnostic equipment (DiagBox or equivalent PSA tool) to restore full functionality and retain preset memory, if applicable.
• For coding and advanced configuration, use a workshop with PSA diagnostic tools or an experienced technician familiar with PSA systems.

Why This Part Fails Most Often

CD radios of this generation commonly develop faults over time due to mechanical wear of the CD mechanism (laser pickup, spindle motor), accumulation of dust, humidity ingress, brittle solder joints from thermal cycling, or failed capacitors in the power supply. Symptoms include inability to read CDs, intermittent audio, loss of presets or display issues. Electrical connector corrosion and supply issues (fuses/ignition feed) can also mimic radio failure.

How To Replace

1. Disconnect the negative battery terminal.
2. Remove surrounding trim carefully to access the radio bezel.
3. Use radio removal keys to slide the radio out of its cage.
4. Unplug the antenna and wiring harness connectors, noting their positions.
5. Install the replacement unit by reversing removal steps, reconnect all plugs and antenna.
6. Reconnect the battery and perform diagnostic coding/programming so the radio is recognized by the vehicle.

This Siemens VDO CD radio with part numbers 964514597700 / 6564RT / 6564V is a practical choice for restoring original audio functions on compatible Citroën and Peugeot vehicles. The presence of OEM connectors ensures a clean installation, while professional coding guarantees full system integration.

This Clarion radio unit (part number 96635824XT) is a direct-fit audio solution designed for a range of PSA vehicles. It provides the standard in-car radio functions required by technicians and competent DIYers replacing factory head units on older Citroën and Peugeot models. Units of this type are commonly referenced by OEM codes 6564JV, 6564JW, 6564LR and 6564TZ, so customers often search by these numbers when sourcing a replacement.

Key Features And Benefits

• Direct replacement for factory radios on compatible Citroën and Peugeot models.
• Retains factory look and basic audio functions, easing installation in original dashboards.
• Recognised by common OEM codes for fast identification: 96635824XT, 6564JV, 6564JW, 6564LR, 6564TZ.
• Good option for workshops and experienced DIY mechanics who can perform wiring and coding operations.

Technical information

• Manufacturer: Clarion
• Model: Citroën C2, Citroën C3, Citroën C8, Citroën Berlingo, Peugeot 206, Peugeot 307, Peugeot 807, Peugeot Partner
• Product Codes: 96635824XT
• Other Numbers: 6564JV, 6564JW, 6564LR, 6564TZ

Installation And Replacement Guide

Typical replacement steps for an experienced technician or competent DIYer:

• Disconnect the vehicle battery before starting to prevent short circuits and protect vehicle electronics.
• Remove trim panels surrounding the radio using appropriate trim tools to avoid damage to plastic clips.
• Unscrew mounting fasteners and gently slide the radio out of the dash.
• Disconnect the factory wiring harnesses and antenna lead. Keep track of any adapter plugs or brackets required.
• Install the replacement unit, reconnect harnesses and antenna, secure with original fasteners and test basic power and audio functions.
• Complete the required coding/programming step with suitable diagnostic equipment to re-enable the unit on the vehicle (see coding note below).

Coding And Activation

This radio requires coding/programming to the vehicle using diagnostic equipment. Programming is typically performed with PSA diagnostic tools (for example DiagBox/Lexia/PP2000 or equivalent) so that the unit is recognised by the vehicle and any anti-theft lock is cleared. If the radio is not coded correctly it may remain locked or have limited functionality.

Installation Recommendations

• Use correct PSA harness adapters when available to avoid cutting factory wiring.
• After installation, verify power, speaker outputs and antenna reception before final assembly of trim.
• When possible, perform the coding step with a diagnostic tool capable of handling PSA radio modules to ensure full compatibility.
• Follow safety instructions and manufacturer procedures for removal and fitting to avoid damage to dashboard components.

Why This Part Typically Fails

• Electrical Faults: Voltage spikes, poor grounding or wiring issues can damage internal electronics.
• Moisture Ingress: Water leaks or high humidity can corrode connectors and components.
• Wear And Age: Mechanical parts (if present), fading solder joints or failing internal capacitors may lead to intermittent operation over time.
• Software/Anti-Theft Lock: Loss of coding or failed initialization after battery replacement or unit swap can make the radio appear non-functional until reprogrammed.

Practical Notes For Workshops

Searchability is high for the listed OEM codes; technicians often order replacement units using numbers such as 96635824XT or the additional codes 6564JV / 6564JW / 6564LR / 6564TZ. Ensure you allow time for coding when scheduling the job, as programming is required to restore full functionality after installation.

High-quality roof mast antenna designed as a direct-fit replacement for a range of Citroën and Peugeot models. Ideal for professional garages and DIY mechanics, this antenna restores reliable AM/FM reception and matches original equipment part numbers 9650911180, 6561Y1, 6561A0 and 6561W5. The rugged rod design ensures stable reception and straightforward installation, making it a practical choice when the original mast is damaged, corroded or suffering from poor signal.

Features

• Rod-Type Mast: Simple, robust design for consistent radio reception.
• OEM Part Number Compatibility: Fits vehicles using part numbers 9650911180, 6561Y1, 6561A0, 6561W5.
• Easy Replacement: Designed for direct swap with factory mounting points and coax connector.
• Professional and DIY Friendly: Suitable for automechanics and experienced home mechanics.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C5; Peugeot 307 (I / II); Peugeot 407
• Product Codes: 9650911180, 6561Y1, 6561A0, 6561W5
• Additional Numbers: 6561A0 | 6561W5 | 6561Y1 | 9650911180

Installation Recommendations

Remove the old mast by unscrewing it from the base and disconnecting the coaxial cable at the connector or under the trim. Inspect the antenna base, sealing gasket and surrounding roof area for corrosion or damage. Clean the mating surfaces and replace worn gaskets to ensure a watertight fit. Screw the new mast into the base by hand and then secure to a snug fit—avoid excessive torque to prevent thread or base damage. Reconnect the coaxial connector and test AM/FM reception and radio operation before reassembling any removed trim. Use basic hand tools; professional fitment is quick for an experienced technician.

Why This Part Most Often Fails

• Mechanical Damage: Mast bending or breaking from car washes, low-clearance obstacles or vandalism.
• Corrosion And Water Ingress: Salt and moisture lead to base corrosion or poor electrical contact.
• Connector Wear: Oxidation or loose coax connection causing intermittent reception or signal loss.
• Aging Materials: Rubber seals and gaskets harden over time, allowing moisture entry and electrical issues.

Fitment And Notes

This antenna is commonly fitted to Citroën C5 and Peugeot 307 / 407 applications using the listed OEM numbers. Customers frequently search by part number in repair shops and online catalogues, so listing the original codes helps find the correct replacement quickly. Always verify physical match (mounting type and connector) when replacing an aftermarket or non-original antenna.

Order this antenna mast to restore reliable radio reception and maintain the vehicle’s original appearance and function. Suitable for routine replacement during bodywork or when reception degrades due to damage or corrosion.

Original PSA roof antenna for Citroën and Peugeot – used, fully functional dismantled part. A suitable replacement for weak radio reception, a broken rod or an oxidized socket. This is an OE antenna so it fits and works exactly like the original factory part. Many variants are already NFP (discontinued production) at PSA, so an original used part is an ideal choice.

Key benefits
– Original PSA quality and exact compatibility
– Stable FM/AM reception, without the need to modify the bodywork
– Plug & play replacement according to OE numbers
– Also suitable for professional repairs – robust design of the base

Technical information
– OE/Ref. numbers: 9646131880, 6561Q3, 6561GP, 6561W7 (mutually interchangeable depending on car equipment)
– Type: AM/FM roof antenna, antenna base with roof pass through
– Amplifier: some versions have an integrated amplifier powered by a coaxial cable (so-called phantom) – refer to the OE numbers and photos of the specific piece
– Connector: coaxial (type may vary by model/year; check photos)
– Location: center of the rear part of the roof (depending on the model)
– Color: black
– Condition: used original part, functional, normal cosmetic signs of use; see the photos for the exact scope of delivery (the antenna rod is included only if it is in the photos)

PSA compatibility
– Peugeot 206 (approx. 1998–2012; depending on equipment and OE number)
– Peugeot 307 I (approx. 2001–2005/2007; hatchback/SW/Break)
– Citroën C5 I (approx. 2001–2004; sedan and Break/station wagon)
– Citroën Xsara (approx. 1997–2005; depending on equipment)
Note: PSA used multiple antenna variations (with/without amplifier, different cable lengths and connectors). It is best to follow the OE numbers listed and compare the shape of the base and connector to your part.

Installation recommendations
– Before mounting, clean the landing surface on the roof for high-quality grounding of the antenna
– For versions with an amplifier, check the power supply via the coaxial cable from the car radio (or use a phantom power supply)
– Tighten appropriately so as not to damage the seal or paintwork

Also searched for
– Citroën/Peugeot roof antenna, antenna base, antenna base, OEM 9646131880, 6561.Q3, 6561.GP, 6561.W7, NFP

How to verify the correctness of the part
– compare the OE number from your part or by VIN
– visually compare the shape of the base and the type of connector with the photos in the menu

This description is intentionally rich in OE numbers and keywords to make your search easier and ensure that you get the exact compatible genuine PSA part.

Original car radio roof antenna for Citroën and Peugeot cars. This is a used PSA OEM part that will reliably restore radio reception (AM/FM) and retain original appearance and functionality. An ideal replacement for a damaged, oxidized or poorly performing antenna.

Compatibility
– Citroën: C3, Xsara (selected engines and years)
– Peugeot: 1007, 206, 307 (selected engines and years)
Always check the exact match against the part number and connector on your car.

OEM/PSA numbers (for search and match verification)
– 9636600680
– 6561Q3
– 6561 GP
– 6561W7
– NFP (No Further Production) status – the part is no longer produced, the original is difficult to find

Technical information
– Type: roof antenna for car radio (AM/FM), in some variants with integrated amplifier
– Location: center/back of the roof
– Power supply: 12 V (amplifier, if there is one for the given variant)
– Connector: PSA specific – usually ISO/Fakra depending on vehicle equipment; verify by photo and part number
– Material: plastic/metal, sealing the base against water
– Condition: used original part, functional; cosmetic traces of normal use possible

Why choose this part?
– Original PSA quality and shape – no compromises in signal reception
– Exact compatibility according to OEM numbers
– Quick assembly, Plug & Play (after checking the compatibility of the connector and seal)

Assembly tips
– Before assembly, check the integrity of the base seal; replace when worn to prevent leakage into the interior.
– Check the compatibility of the connector with the car’s wiring (ISO/Fakra); in case of difference, use the appropriate reduction.
– If your car is powered by an antenna amplifier, check for phantom power from the car radio.

Note
– The delivered content corresponds to the actual condition in the photos in the advertisement. Compare part numbers before ordering: 9636600680, 6561Q3, 6561GP, 6561W7. This is the most reliable way to confirm compatibility with Citroën C3, Xsara and Peugeot 1007, 206, 307.

You are looking for: antenna Citroën Peugeot 9636600680, antenna base 6561Q3, car radio antenna PSA 6561GP/6561W7, roof antenna C3/XSARA/206/307.

Original roof antenna with cabling for Citroën Berlingo II and Peugeot Partner. Practical solution for restoring reliable radio intake after mechanical damage to the rod, oxidation of contacts or impaired signal intake. It is a used OEM part removed from the car, suitable as a cost -effective replacement of the original.

The antenna is used to receive AM/FM signal for the radio and is fitted with coaxial guidance for easy connection to the on -board installation. Thanks to the original design, it fits exactly into the existing opening in the roof and maintains the tightness and appearance of the car.

typical manifestations of defects
Weak or fluctuating radio intake, channel outages, increased noise, broken rod after washing the car or clogged/corroded contacts and base seal, or leakage at the attachment point.

Installation and Exchange
The replacement is usually simple: the interior is removed by the ceiling lighting and partly released by the ceiling at the antenna site, the coaxial cable is disconnected and the base matrix is ​​released. Set the new antenna in the roof opening, check the seal, tighten the nut and connect the line. No coding or calibration is required. It is recommended to check the condition of the seals and the correct wiring line to prevent leakage.

Compatibility
Designed for Citroën Berlingo II (B9) and Peugeot Partner II. To be sure of compatibility, we recommend verifying the conformity according to the number of the part below.

technical information

• Manufacturer: PSA Peugeot Citroën (OEM)
• Model: Citroën Berlingo II, Peugeot Partner II
• product codes: 656110, 656143
• Other numbers: –

Why choose this episode
The original design guarantees the correct geometry, quality of income and connectors compatibility. Used OEM Part is an economic and functional choice that restores the reliability of the car radio without compromises in assembly and appearance.

Package content
Roof antenna including connection cabling according to photo and description.

keywords for search
Antenna car radio, roof antenna, antenna base, Citroën Berlingo II, Peugeot Partner II, PSA 656110, PSA 656143

Original Siemens VDO RD03-01 CD radio designed for Citroën and Peugeot vehicles. This OEM-style head unit is commonly listed under part numbers 96489417XT00, 96489417XT, 6564RV, 6564RT and 6564A4 and is frequently searched by these codes. Ideal for professional workshops and experienced DIY mechanics who need a direct-fit replacement that preserves factory audio functions and integration.

Compatibility

Suitable For: Citroën Berlingo II, Citroën C2, Citroën C3 I, Citroën C3 Pluriel, Citroën C8, Peugeot 206, Peugeot 307, Peugeot 807, Peugeot Partner II. Check product codes when searching or ordering to ensure match with the vehicle’s original unit.

Technical Information

• Manufacturer: Siemens VDO
• Model: RD03-01
• Product Codes: 96489417XT00, 96489417XT
• Other Numbers: 6564RV, 6564RT, 6564A4, RD03-01

Function And Description

This unit is a factory-style car radio with integrated CD player, built to match the original equipment specification for select Citroën and Peugeot models. It provides standard radio reception and CD playback while connecting to the vehicle’s wiring harness and antenna. As an OEM-type unit, it is designed to work with the factory power and audio outputs and to fit the original dashboard opening without modification.

Installation

Typical Replacement Steps:

1. Disconnect The Battery Before Starting Work To Prevent Short Circuits And Protect Vehicle Electronics.
2. Remove Trim Panels Surrounding The Radio To Access Mounting Screws.
3. Unscrew And Carefully Slide Out The Old Unit; Disconnect The Wiring Harness And Antenna Plug.
4. Connect The Replacement Unit, Refit Screws And Trim, Then Reconnect The Battery.
5. Power Up And Proceed With Required Programming/Coding (see Below).

Programming And Commissioning

This radio must be programmed to the vehicle using diagnostic equipment before full operation is restored. Programming ensures correct recognition by the vehicle and may be required for audio, steering wheel controls and immobiliser-related functions. Recommended Options For Commissioning:

• Programming With A PSA-Compatible Diagnostic Tool (e.g., DiagBox/Lexia/PP2000) Or Equivalent.
• Performed By A Technician With Experience In PSA Systems If You Are Not Familiar With The Process.

Installation Recommendation

For reliable results, carry out the electrical disconnection and reconnection in accordance with the vehicle manufacturer’s procedures. If programming equipment is not available, have the unit installed and coded by a workshop equipped for PSA vehicles to restore all factory functions.

Common Failure Reasons

• Mechanical Wear Of The CD Mechanism Leading To Read Errors Or Jammed Discs.
• Failing Internal Electronics Due To Age, Temperature Cycling Or Moisture Ingress.
• Broken Or Corroded Connectors Or Antenna Leads Causing Signal Loss Or No Power.
• Blown Fuses Or Poor Vehicle Power Supply Connections.

Why Choose This Unit: If you are repairing an affected Citroën or Peugeot and you have the correct part number, this RD03-01 Siemens VDO radio offers a direct-fit replacement that keeps factory appearance and integration. Search terms To Use: 96489417XT00, 96489417XT, 6564RV, 6564RT, 6564A4, RD03-01 and the vehicle model names for fast results in parts catalogs.

This radio is compatible with a wide range of models, including Citroën C2, C3, C8, and Peugeot 206, 206+, 307, and 807. Its versatility extends also to vehicles such as the Citroën Berlingo and Peugeot Partner, making it a highly universal solution for various PSA vehicles.

Technical Information

• Manufacturer: CLARION
• Model: RD3-01
• Product Codes: 96635823XT, 6564WF, 6564WG
• Additional Numbers: PU-2859A(L)

This car radio represents an effective solution for those unwilling to compromise on audio quality, even in older vehicles. Whether for daily commuting or longer trips, it delivers excellent audio performance. Thanks to its adaptability across many Citroën and Peugeot models, this unit is a superb choice for enjoying music and radio broadcasts without the need to purchase a new radio system.

This car radio is fully compatible with Citroën models C2, C3, C8, and Peugeot models 206, 307, 807, enhancing its appeal for owners of these cars. It can also be installed on Partner and Berlingo models, increasing its versatility. Prior to installation, the radio must be professionally coded to the vehicle using appropriate diagnostic tools to ensure flawless operation.

Technical Information

• Manufacturer: CLARION
• Models: Citroën (C2, C3, C8), Peugeot (206, 307, 807), Partner and Berlingo
• Product Codes: 96488011XT, 6564JW, 656484, 6564JV, 656497, 6564TN

Each radio undergoes thorough inspection to guarantee full functionality. Thanks to its excellent compatibility with various models, adapting this radio to a new vehicle is straightforward and efficient. Professional assistance with vehicle diagnostics is recommended to secure proper setup and activation of the radio in your car.

If you are looking to replace the original radio with a quality solution in your vehicle, choose this CLARION car radio featuring an original design and outstanding functionality. Upgrading or replacing your car audio system has never been easier!

Are you searching for a quality and reliable CD player radio for your Citroën or Peugeot? Our selection of used car parts features a Siemens VDO CD player radio, specifically designed for Citroën and Peugeot models. This radio offers an exceptional combination of performance, functionality, and technology that will elevate your driving experience.

The radio is equipped with user-friendly features for convenient CD playback, making it the ideal choice for anyone looking to enhance their driving experience with a device of verified quality. For proper functional setup, the radio must be paired with the vehicle using a diagnostic device after installation, ensuring seamless connectivity with the vehicle’s system.

Technical Information:
Manufacturer: Siemens VDO
Model: Compatible with Citroën (Berlingo II, C2, C3 I, C3 Pluriel, C8) and Peugeot (1007, 206, 307 I, 807, Partner II)
Product Codes: 96599990XT 00, 6564RT, 6564RV, 6564JS, 6564JT, 6564LT

Thanks to its versatility and broad compatibility with various Citroën and Peugeot models, this CD player radio is an excellent choice for anyone looking to replace the original device or upgrade their audio system. Installing the radio unit in your vehicle will not only improve sound quality but also increase the overall value of the car.

Quality craftsmanship and the ability to integrate into numerous popular models of Citroën and Peugeot make this CD player radio a highly attractive product for those looking to combine functionality with aesthetic appeal. Remember, for warranty preservation and performance optimization, professional installation is required.

If your current model is not listed, do not hesitate to contact us for compatibility confirmation. We look forward to your order and wish you many satisfied kilometers with your new Siemens VDO CD player radio!