Genuine Citroën/Peugeot/DS speaker – OEM 9803506480

Are you looking for a replacement for a crackling or malfunctioning door speaker? This genuine PSA speaker with part number 9803506480 is exactly the part you need. It is a used, carefully inspected OEM part from disassembly – it fits without modifications, retains the factory sound and uses the original connector and mounting.

Key benefits
– Original PSA part (OEM) – certainty of compatibility and easy installation
– Plug & Play – uses the factory connector and brackets in the door
– Verified from operation – used, functional condition, visually inspected
– Suitable as a direct replacement for the original speaker code 9803506480

Vehicle compatibility
– Citroën: C-Elysée (from 2012), C4 II B7 (2010–2018), C4 Picasso/Grand C4 Picasso (2013–2018)
– DS Automobiles: DS4 (2011–2018)
– Peugeot: 301 (from 2012), 3008 I (2009–2016), 5008 I (2009–2016), 308 T9 (from 2013)
Note: Location usually front/rear door depending on equipment. Please compare the OEM number and shape with your original speaker before ordering.

Technical information
– OEM part number: 9803506480 (PSA)
– Type: wideband door speaker (original factory design)
– Mounting: original PSA plastic frame, three-point screwing (typical for PSA)
– Connection: original PSA 2-pin connector
– Basket diameter: approx. 165 mm (6.5″) – standard size for PSA doors
– Impedance/Power: PSA typically 4 Ω; performance corresponds to the factory audio system
Note: Parameters may vary depending on specific equipment. To be sure, compare with the original part in the car.

Condition and packaging
– Condition: used, fully functional, no extra accessories
– Package: 1pc speaker (without grille/door frames unless otherwise stated)

How to verify the correctness of the part
– Check the number on your original speaker – it must match 9803506480
– Compare the connector and mounting pitches according to the photos
– In case of uncertainty, send us the VIN – we will verify compatibility

Typical symptoms for replacement
– Grunting, sound dropouts, distortion at certain volumes
– Stiff/damaged diaphragm hinge or malfunctioning coil
– Frequent damage after the door is flooded or after long-term loading

Searched keywords
Citroën Peugeot DS door speaker, OEM 9803506480, door speaker 165mm, original PSA speaker, replacement speaker 4 Ω

This original speaker 9803506480 is an ideal choice for auto mechanics and DIY enthusiasts who want to quickly and cleanly return the car to factory sound without the need for installation modifications.

Main product description

FM + GPS antenna harness in dashboard for Peugeot 3008 I and 5008 I. Original used PSA wiring, intended for cars with built-in navigation. An ideal replacement in the event of a failure of the communication line between the roof antenna and the main unit of the car radio/navigation (weak signal, radio outages, non-functional GPS).

Key benefits
– Original PSA part – correct length, wiring and shielding for minimal signal loss
– Supports FM/AM radio and GPS – stable reception and accurate location determination
– Exact Fakra connectors – no modifications or tinkering, plug & play into the dashboard

Compatibility
– Peugeot 3008 I (T84), approx. 2009–2016
– Peugeot 5008 I (T87), approx. 2009–2017
– Suitable for cars with built-in GPS navigation (e.g. RNEG/WIP Nav, RT6/RNEG2).
Pay attention to the variants depending on the equipment (e.g. without/with navigation, DAB, etc.). Compare part numbers and connectors before purchasing.

Reference numbers (OE/ODM)
– 9664381680
– 6561XT
– 6561YS
The given codes serve as substitutes/references. If your original number matches one of the above, the part is usually compatible.

Technical information
– Features: coaxial cable bundle for FM/AM and GPS transmission between the roof antenna and the in-dash unit
– Location: dashboard – behind/around the car radio and navigation unit
– Connectors: Fakra (typically blue – GPS, white/black – FM/AM)
– Shielding: multi-layer coaxial cable for low attenuation and immunity to interference
– Designation: cars with roof “shark-fin” antenna with GPS
– Does not include: roof aerial, radio/nav unit or brackets – wiring only

Typical symptoms of a defect and when to change the bundle
– Fluctuating or weak FM/AM reception, noise
– GPS loses position, slow fix of satellites
– Mechanical damage or broken Fakra connector fuses
– Additional mounting/dismounting that damaged the cable or shielding

Condition and origin
– Used original PSA part dismantled from the first generation Peugeot 3008/5008
– Certified connectors, without cracks and with functional latches
– Normal cosmetic wear not affecting function

Installation recommendations
– Disconnect the battery before assembly
– Check and match Fakra connector colors/shapes with your car
– Requires disassembly of car stereo/nav and access to dashboard
– After installation, perform a FM and GPS fix reception test
– In case of uncertainty, verify compatibility according to the VIN

SEO search terms
Peugeot 3008 5008 antenna harness, FM GPS antenna wiring, 9664381680, 6561XT, 6561YS, dashboard antenna cable, Fakra GPS, original PSA part, car radio navigation.

Summary
Looking for a quick and clean solution to radio or GPS outages on a first generation Peugeot 3008/5008? This original in-dash FM+GPS antenna harness with references 9664381680 / 6561XT / 6561YS is an exact replacement without modification and will ensure reliable reception and accurate navigation.

Original OEM car radio with GPS navigation and Bluetooth type RNEG (MyWay) from the manufacturer Harman Becker for PSA Citroën/Peugeot cars. The unit is fully functional and tested, removed from a Peugeot 3008. Wanted codes: 96661984XT, 1616962480, 16095882XT, 6579CE – unmistakable designation for easy verification of compatibility.

Especially suitable for models Peugeot 3008 I and 5008 I and Citroën C3 Picasso equipped with the RNEG/MyWay system. It is an original unit that maintains complete integration with the vehicle – display on the original display, control on the steering wheel and communication via the CAN bus. In the RNEG system, navigation maps are stored on an SD card, Bluetooth is used for hands-free calls.

The unit requires pairing with the car (so-called VIN upload) using PSA diagnostics, otherwise it beeps and limits functions for safety reasons. Diagbox/Lexia/PP2000 can be used for pairing. This system does not work with a PIN code – authorization takes place just by entering the VIN into the radio.

Installation is straight-forward: remove the existing unit after disconnecting the battery, rewire the main harness (PSA Quadlock) and antenna connectors (FAKRA for AM/FM and GPS), plug in the radio, and after mechanical installation, telecode/pair with diagnostics. We recommend comparing the part numbers and unit type (RNEG/MyWay) with the original radio in the car.

Condition corresponds to used parts – minor signs of use do not affect function. The unit was tested before disassembly and retested after disassembly.

Technical information

• Manufacturer: Harman Becker (PSA)
• Model: RNEG / MyWay, car radio with GPS and Bluetooth
• Product codes: 96661984XT; 1616962480; 16095882XT
• Other numbers: 6579CE

Always check compatibility by part number and vehicle equipment. If you are not sure, send us the VIN – we can help verify the correct RNEG unit for your Citroën/Peugeot.

Original FM + GPS roof antenna for Peugeot 3008 I and 5008 I. Ideal replacement for a non-functional antenna base with poor radio reception or GPS outages. Thanks to the identical OEM codes (6561XT, 9664509580), installation is plug & play without the need for coding – simply replace and drive.

This combined antenna ensures quality FM radio reception and a reliable GPS signal for PSA factory navigation (eg RNEG/WipNav, RT6/eMyWay). It is located on the rear part of the roof, where it is attached with a central screw and sealed with a rubber ring. There are usually two coaxial outputs on the body of the unit (typically Fakra) – separately for FM and for GPS. Please check the number and type of connectors according to your car.

Compatibility is factory set for the first generation Peugeot 3008 (T84, approx. 2009-2016) and Peugeot 5008 (T87, approx. 2009-2016). PSA used several close variants; codes 6561XT and 9664509580 correspond to the FM+GPS version. Alternate numbers 6561JT and 6561JS indicate related versions. Before purchasing, compare the code on your original part, possibly the shape of the base and connectors.

Typical problems that this replacement solves: fluctuating or weak FM reception, “no GPS signal”, slow location finding, navigation crashes. The cause is usually a hardened seal, ingress of water into the base and subsequent oxidation of the preamplifier or connectors. Replacing a complete unit is usually faster and more reliable than partial repairs.

Brief replacement procedure: we recommend disconnecting the minus pole of the battery, freeing the rear part of the roof panel, disconnecting the coaxial connectors from the old antenna, loosening the center nut, removing the unit from the body, cleaning the seating surface and checking the seals. Install the new antenna, tighten the nut (do not switch to avoid deformation of the sheet metal), plug in the connectors and test FM and GPS reception.

Always check OEM codes and connectors match for error-free assembly. If your vehicle has special equipment (e.g. built-in handsfree with GSM antenna), there may be other versions with three connectors – this item is for the FM + GPS variant.

Technical information

• Manufacturer: PSA – Citroën/Peugeot (original part)
• Model: Peugeot 3008 I (T84, 2009-2016), Peugeot 5008 I (T87, 2009-2016)
• Product codes: 6561XT
• Other numbers: 9664509580, 6561JT, 6561JS

If you are looking for a reliable roof antenna replacement for your Peugeot 3008/5008, this unit with codes 6561XT / 9664509580 is a proven choice. You get stable FM reception and accurate GPS positioning without complex adjustments.

Replacing the speaker is a straightforward process that requires minimal tools. Typically, you can expect to replace your speaker when you notice a decline in sound clarity, distortion, or if it stops working altogether. Common reasons for speaker failure include wear and tear from prolonged use, exposure to moisture, or damage from road vibrations.

Technical Information

• Manufacturer: PSA
• Model: Citroën, Peugeot
• Product Codes: 9665231980, 9803506380
• Additional Numbers: Not Applicable

Overview

This replacement speaker is designed for a range of Citroën and Peugeot models and is suitable for professional workshops and DIY mechanics. With a 130 mm diameter, it restores clear midrange and vocal reproduction in door and dashboard locations where the original speaker has failed. The unit is supplied with OE reference numbers commonly used when searching for spare parts, making it easy to find and order by code.

Applications

• Citroën C‑Elysée
• Citroën C3 II
• Citroën C4 II
• Citroën C4 Picasso
• DS3
• DS4
• Peugeot 3008 I
• Peugeot 301
• Peugeot 308 (T9)
• Peugeot 5008 I

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C‑Elysée, Citroën C3 II, Citroën C4 II, Citroën C4 Picasso, DS3, DS4, Peugeot 3008 I, Peugeot 301, Peugeot 308 (T9), Peugeot 5008 I
• Product Codes: 9665245280, 6562E8, 6562AE
• Other Numbers: 6562.AE, 656200000000, 6562AE, 6562E8, 9665245280
• Diameter: 130 mm

Installation Recommendations

Replacement is straightforward for an experienced mechanic and can be completed with basic trim tools. Recommended procedure:

• Disconnect the vehicle battery negative terminal before starting work to avoid short circuits when handling electrical connectors.
• Remove the trim or speaker grille and any door card fasteners using plastic trim tools to avoid damage to clips and panels.
• Unscrew the original speaker, unplug the factory connector and note the polarity of the wiring (mark positive/negative if necessary).
• Compare the new speaker with the original for mounting hole alignment and depth; use an adapter bracket or gasket if required to ensure a secure fit and proper seal.
• Connect the speaker, respecting polarity, and test audio at low volume before final assembly to confirm correct operation.
• Reinstall speaker screws evenly without over‑tightening to prevent frame distortion. Refit trims and confirm there are no panel rattles.
• Consider adding a thin foam gasket or sound‑deadening mat between speaker and mounting surface to improve bass response and reduce vibrations.

Why This Part Typically Fails

Speakers commonly fail due to age and environmental factors. Typical causes include deterioration of the surround or cone material, water ingress from window seals or door leaks, corrosion of terminals and connector contacts, mechanical damage from impact, and thermal damage or voice‑coil burnout caused by excessive amplifier clipping. Symptoms are buzzing, rattling, distorted sound or complete loss of audio from the affected channel.

Notes

Search by OE code for fastest identification. Ideal for restoring original sound quality in affected Citroën and Peugeot vehicles listed above. Recommended for replacement by trained technicians or experienced DIYers who follow safe working practices.

As part of the modern automotive system, telematic units facilitate various functions such as data transmission, navigation, and vehicle monitoring. If you’re facing connectivity issues, it’s often due to wear and tear of the unit. Regular checks can help ensure optimal performance.

Technical Information

• Manufacturer: PSA
• Model: Peugeot Citroen
• Product Codes: 9674767580
• Other Numbers: 1611632880, 6579RY

This unit is available under several product codes: 96751717XT, 16064748XT, and 16095886XT, making it easy to find the right fit for your vehicle.

Replacing the car radio is straightforward, and it’s typically recommended during routine maintenance or when upgrading your vehicle’s audio system. Owners should be aware that a diagnostic tool is necessary to program the radio to your specific vehicle, ensuring functionality and compatibility.

The Harman Becker RNEG Car Radio is known to provide excellent sound quality, and its features often remain reliable over time. Regular use can lead to wear, particularly in older vehicles, making proactive replacement a wise choice for music enthusiasts and drivers alike.

Technical Information

• Manufacturer: Harman Becker
• Model: RNEG
• Product Codes: 96751717XT, 16064748XT, 16095886XT
• Additional Numbers: Compatible with several PSA Citroën and Peugeot models