Overview

Continental RD4N1M-03 is a factory-style CD radio unit commonly found in older PSA Group vehicles. This unit offers standard FM/AM reception and a CD player, and it is built to the original equipment specifications for a flush fit in the dashboard. Many buyers search for this unit by part number (for example 96750215XT, 16106912XT, 6574PW, 6574PX, 16077504XT), so the listing includes all common references to make finding the right replacement easier.

Compatibility

Commonly fitted to Citroën C3 II and Peugeot 207 models and other PSA vehicles equipped with the RD4 radio platform. Verify the part number shown on your existing unit before purchase — this radio is often identified and ordered by product code.

How It Works And Why It May Need Replacement

The RD4 radio provides radio reception and CD playback and interfaces with the vehicle’s wiring harness for power, speakers and antenna. It also often requires a software/parameter transfer to be recognized by the vehicle’s electrical system. Typical failure modes include mechanical wear of the CD mechanism, failing display/backlight, connector corrosion or intermittent power due to worn solder joints, and software/locking issues after replacement.

How To Replace

• Park the vehicle on a level surface and ensure ignition is off.
• Disconnect the negative battery terminal before starting work to avoid short circuits.
• Remove dashboard trim panels using appropriate trim tools to avoid damage.
• Unscrew the radio retaining bolts and gently slide the unit out of the dash.
• Disconnect the electrical connectors, antenna cable and any external amplifier leads.
• Install the replacement unit by reversing removal steps; connect all plugs and antenna securely.
• Reassemble trim panels and reconnect the battery.
• Perform diagnostic programming (see below) so the vehicle recognizes the new radio.

Installation Recommendations

Always disconnect the battery before starting and use proper trim tools to prevent damage to panels. Ensure connectors and the antenna socket are clean and free of corrosion. After mechanical installation, the radio must be programmed to the vehicle with PSA-compatible diagnostic equipment (DiagBox/Lexia/PP2000) to restore full functionality and remove any security locks.

Technical Information

• Manufacturer: Continental
• Model: RD4 RD4N1M-03
• Product Codes: 96750215XT, 16106912XT, 6574PW, 6574PX, 16077504XT
• Additional Numbers: 6574PW, 6574PX, 16077504XT (other cross-references may apply)

Why This Part Most Often Fails

Mechanical wear of the CD mechanism is the most frequent cause of failure, especially in high-mileage units or where moisture/dust has penetrated the case. Electrical faults such as degraded connector contacts, failed capacitors on the power supply board or worn solder joints are also common. Finally, when replacing a radio, improper coding or lack of diagnostics can make the unit appear nonfunctional until it is correctly programmed to the vehicle.

Notes For Professionals and DIYers

This is a direct-fit factory radio intended for vehicles originally equipped with the RD4 system. Because many customers search by part number, the product codes listed above are included for clarity. Suitable for experienced DIY mechanics and professional workshops; diagnostic equipment is required to complete the installation and ensure full functionality after fitment.

Search And Ordering Tips

Search using the part numbers 96750215XT, 16106912XT, 6574PW, 6574PX or 16077504XT to quickly find the correct item. The listing includes multiple cross-references to help identify the exact unit used by your Citroën or Peugeot.

Replace Your Vehicle’s Original RD4 Head Unit With A Direct-Fit Blaupunkt RD4 CD Radio (OE-Fit For Citroën/Peugeot). This unit Is A Robust Option For Workshops And Experienced DIYers Looking For An OEM-Style Replacement: It Provides Reliable Radio Reception And CD Playback In Vehicles Where The RD4 Standard Was Factory-Fitted. Ideal For Mechanics Searching By Part Number (9664769677, 657932, 6579PC, N1-02), The Unit Integrates With Original Wiring Harnesses And Preserves Factory Aesthetics When Properly Installed And Coded.

Technical Information

Manufacturer: Blaupunkt / Stellantis (Original Equipment)

Model: RD4 N1-02 (CD)

Product Codes: 9664769677

Other Numbers: 657932, 6579PC, N1-02

Compatible Models

Citroën Berlingo (B9), Citroën C2, Citroën C3, Citroën C3 Picasso, Citroën C3 Pluriel, Citroën C4, Citroën C8, Peugeot 207, Peugeot 307 II, Peugeot 807, Peugeot Partner Tepee.

Function And Typical Faults

The RD4 Head Unit Provides AM/FM Radio Reception And CD Playback With Integration Into The Vehicle’s Electrical System. Common Failure Modes Include Faulty CD Mechanism (Mechanical Wear Or Jamming), Display Or Button Malfunctions Due To Age, Power Loss From Blown Fuses Or Corroded Connectors, And Software/Immobiliser Locking That Requires Diagnostic Pairing To Restore Full Functionality. Electronic Components Such As Electrolytic Capacitors May Degrade Over Time, Causing Intermittent Power Or Audio Issues.

How Often Units Fail And Why

Failures Are Most Likely In Vehicles Older Than A Decade, Especially Where Units Have Been Exposed To High Humidity, Temperature Cycles, Or Frequent Use Of The CD Mechanism. Mechanical Wear On Moving Parts (Tray/Spindle/Laser) And Connector Corrosion Are The Most Frequent Causes. Electrical Faults Caused By Poor Grounding Or Aftermarket Modifications Can Also Lead To Unit Malfunction.

How To Replace

1. Disconnect The Negative Terminal Of The Battery Before Starting Work To Avoid Short Circuits Or Data Loss.
2. Remove Surrounding Trim Panels Carefully Using Plastic Trim Tools To Avoid Damage.
3. Unscrew The Factory Head Unit Fasteners And Slide The Unit Out Gently.
4. Disconnect The Antenna Cable, Wiring Harnesses, And Any Additional Connectors (Steering Wheel Control, Microphone If Present). Inspect Connectors For Corrosion Or Bent Pins.
5. Install The Replacement Unit By Reversing The Procedure: Connect Harnesses, Secure The Unit, Refit Trim.

Pairing And Coding

This Radio Requires Diagnostic Pairing/Coding To The Vehicle. Pairing Is Typically Performed With A Compatible PSA Diagnostic Tool (DiagBox/Lexia/PP2000) Or Equivalent Workshop Equipment To Unlock Features And Ensure Proper Communication With The Vehicle’s Bus Systems. If The Unit Is Not Coded, It May Remain Locked Or Exhibit Limited Functionality.

Installation Recommendations

Installations Should Be Performed By Experienced Technicians Or Skilled DIYers Familiar With PSA Electrical Systems. Check And Replace Any Blown Fuses Before Assuming The Radio Is Faulty. Ensure All Earth Connections Are Clean And Tight. If Retaining Steering Wheel Controls Or Other Vehicle Integrations, Verify That Adapters Or Interface Modules Are Compatible With The RD4 Standard. After Installation, Perform Diagnostic Pairing And Verify Radio, Antenna, And Control Functions.

Reason Why The Part Most Commonly Fails

The Most Common Reason For Failure Is Mechanical Wear Of The CD Mechanism And Connector Corrosion Leading To Power Or Signal Loss. Environmental Factors (Moisture, Heat), Age-Related Component Degradation, And Electrical Issues Caused By Poor Grounds Or Aftermarket Modifications Are Frequent Contributors.

The Siemens VDO RD4 N1-00 is a direct-fit factory head unit used across a range of PSA Group vehicles. This single-DIN unit combines AM/FM radio with a front-loading CD player and full integration with vehicle controls, providing reliable in-car entertainment and RDS station identification. Ideal for workshops and DIY mechanics replacing an original RD4 unit, this part restores factory functionality and keeps steering wheel controls and dashboard integration intact (when fitted on the vehicle).

Key Benefits

• Direct OEM fit for many Citroën and Peugeot models — preserves original look and control functions.
• CD playback and RDS radio for clear station and track information.
• Retains steering wheel audio controls and display information where vehicle wiring and equipment allow.
• Sold under manufacturer reference numbers commonly searched by mechanics and parts buyers.

How It Works And What It Does

The RD4 N1-00 is the factory radio unit responsible for radio reception, CD playback and communicating basic audio commands to the vehicle’s audio system. In vehicles equipped with steering wheel controls or multifunction displays, the unit exchanges data over the vehicle bus to show station and track info and to respond to user inputs from the steering wheel.

Replacement Procedure (Overview)

• Disconnect the vehicle battery before starting work to avoid short circuits and unit damage.
• Remove trim panels surrounding the radio, then extract the head unit using the appropriate removal keys or fastener removal tools.
• Unplug the antenna connector and the vehicle wiring harness connectors from the rear of the unit.
• Fit the replacement unit, reconnect the antenna and wiring harness, reassemble trim and reconnect the battery.
• Perform diagnostic pairing/programming so the radio is authorized and fully functional within the vehicle’s electronic network.

Recommended Installation

Disconnect the battery and follow the vehicle manufacturer’s removal procedure to avoid damage. Because the RD4 radio must be paired/programmed to the vehicle electronics, we recommend using PSA diagnostic equipment (DiagBox/Lexia) or having the final coding performed by a workshop with the appropriate tools. Proper coding ensures the unit is fully integrated with the vehicle’s controls and prevents audio or authorization errors.

Common Failure Causes

• CD Mechanism Wear: Mechanical parts and optical reading components in the CD drive degrade over time, causing read errors or inability to load discs.
• Power Supply Issues: Corroded contacts, blown internal fuses or voltage spikes can lead to intermittent power loss or complete unit failure.
• Button/Display Wear: Frequent use and sun exposure can cause faded displays, unresponsive keys or backlight failure.
• Software/Authorization Problems: Units that are not coded to the vehicle may display errors or be locked; diagnostic programming is required to restore full operation.

Technical Information

• Manufacturer: Siemens VDO
• Model: RD4 N1-00
• Product Codes: 96624490XT, 16077504XT, 6564AK
• Other Numbers: N1-00

Why Choose This Unit

For workshops and experienced DIY mechanics replacing a factory RD4 radio, this Siemens VDO unit restores original functionality and appearance. It is suitable for vehicles listed in the compatibility section and is frequently referenced by its product codes in parts searches, making it easy to identify and order the correct replacement.

Compatibility (Examples)

Commonly fitted to Citroën models: Berlingo III, C2, C3, C4, C8. Commonly fitted to Peugeot models: 207, 307, 407, 807, Partner III. Always confirm the unit’s reference number matches the original unit on the vehicle before installation.

Final Notes

This unit requires diagnostic pairing/programming to the vehicle. Follow safe working practices when removing and installing the head unit to avoid damage to connectors and vehicle electronics.

Product Description

High-quality OEM Continental RD4N1M CD head unit with MP3 playback designed for many Citroën and Peugeot models. This unit offers reliable radio reception, CD playback and MP3 file support from CD media. It is a direct-fit replacement for vehicles equipped with the original RD4N1M system, making it suitable for workshops and experienced DIY mechanics who need an OE-style audio solution.

Fitment And Compatibility

Common fitment includes Citroën and Peugeot models such as Citroën C2, C3 I, C4, C8 and Peugeot 207, 307 II, 807. The unit is often referenced by OE/product numbers and may be listed under multiple part codes—check the numbers below when searching or ordering.

How It Works And What It Does

The unit functions as an in-dash radio tuner and CD player with MP3 playback capability. It provides audio output to the vehicle speaker system and connects to the vehicle wiring harness and antenna. In many vehicles the head unit must be coded/programmed to the car’s electronics to restore full functionality (see technical note below).

Replacement Procedure (Step-by-step)

1. Before starting, disconnect the vehicle battery to avoid short circuits and protect vehicle electronics.
2. Remove surrounding trim panels carefully using appropriate trim tools to avoid damage.
3. Unscrew and slide the head unit from the dash using the correct removal keys or screws.
4. Unplug the main wiring harness(es), antenna connector and any auxiliary or microphone leads.
5. Install the replacement unit by reversing the removal steps: connect harnesses, secure the unit, re-fit trim and reconnect the battery.
6. Perform the required diagnostic coding/programming so the radio is recognized and fully functional with the vehicle systems.

Installation Recommendations

Always disconnect the battery prior to removal/installation and follow the vehicle manufacturer’s service procedures to avoid damage. Because this radio requires diagnostic coding to the vehicle, coding should be performed with appropriate PSA diagnostic tools. If you are not experienced with PSA programming tools, we recommend installation and coding by a professional workshop equipped for Citroën/Peugeot diagnostics.

Technical Information

Manufacturer: Continental
Model: RD4N1M (CD with MP3)
Product Codes: 9665751777
Additional Numbers: 657992, 657990, 657989, 657937, 657935, 657934, 6579PC

Common Failure Causes

Failures typically result from mechanical wear in the CD mechanism, dust or debris in the loader, moisture ingress or corrosion on connector pins, intermittent power supply (blown fuses or poor ground), and age-related electronic component failures (capacitors, solder joints). Units swapped between cars without proper diagnostic coding can exhibit limited functionality until they are correctly programmed.

Why Choose This Unit

This Continental OE head unit is the correct replacement for vehicles originally fitted with the RD4N1M system and preserves factory look and operation. It is suitable for mechanics and competent DIYers who can perform physical replacement and arrange required diagnostic coding.

This OEM Siemens VDO RD4N1-02 CD radio is a direct-fit replacement for a range of Citroën and Peugeot models. Ideal for professional workshops and experienced DIY mechanics, the unit restores full factory functionality and maintains original dashboard aesthetics. The radio is commonly searched by its part numbers, so listing the codes below helps you find the exact match quickly.

Compatibility And Use Case

Designed for original equipment fitment in Citroën and Peugeot cars listed below. Suitable for vehicles that require the RD4N1-02 radio platform and factory connector interfaces. Recommended for replacing faulty factory radios with CD mechanism or radio units that lost pairing/programming with the vehicle.

Technical Information

• Manufacturer: Siemens VDO
• Model: RD4N1-02 (CD Radio)
• Product Codes: 96647697XT, 16077504XT, 6564ZS, 6564ZT
• Other Numbers: RD4N1-02

Compatible Models

• Citroën Berlingo III
• Citroën C2
• Citroën C3
• Citroën C4
• Citroën C8
• Peugeot 207
• Peugeot 307
• Peugeot 407
• Peugeot 807
• Peugeot Partner III

Installation Recommendations

• Before starting, disconnect the negative terminal of the battery to avoid short circuits and protect vehicle electronics.
• Remove trim panels and radio surround using appropriate plastic trim tools to prevent damage to trim pieces.
• Unscrew mounting bolts and gently slide the radio from the dash. Carefully unplug all electrical connectors and the antenna lead.
• Inspect connectors and wiring for corrosion or damage. Replace any brittle wiring or corroded terminals before installing the replacement unit.
• Fit the new radio, reconnect antenna and electrical plugs, secure mounting bolts and refit trim panels.
• After mechanical installation, the radio must be programmed/paired to the vehicle with diagnostic equipment to restore full functionality and remove anti-theft locks. Use dealer-level or PSA-compatible diagnostic tools (e.g., DiagBox/PP2000) or equivalent workshop equipment for coding.
• Reconnect the battery only after reassembly is complete. Verify radio operation, CD loading/ejection, and all audio functions before returning the vehicle to the customer.

Why This Part Most Often Fails

• Worn CD Mechanism: Frequent CD use accelerates wear of the tray, spindle motor and optical pickup, causing read errors or mechanical jams.
• Age-Related Electronic Failure: Electrolytic capacitors and solder joints can degrade over many years, leading to intermittent faults, loss of power or audio dropouts.
• Moisture And Corrosion: Water ingress or high humidity can corrode connectors and circuit boards, especially in vehicles exposed to damp conditions.
• Power Surges And Battery Events: Jump-starts, battery replacements or voltage spikes can damage internal electronics if correct procedures are not followed.
• Connector Damage: Broken antenna plug or harness pin damage during previous repairs often causes poor reception or loss of function.

Practical Notes For Mechanics

• Commonly searched by part numbers 96647697XT, 16077504XT, 6564ZS, 6564ZT and RD4N1-02 — keep these handy when sourcing the unit.
• Check the vehicle for previous repair evidence (wet seats, dashboard damage, aftermarket installations) that could have affected the original radio.
• Save time by verifying connector types and mounting dimensions before the job; the RD4N1-02 is an OEM-format unit but trim brackets and fascia may vary by model year.

How Often Failures Occur

Failures are more frequent on older vehicles (typically 8–15+ years) and in cars with heavy CD use or exposure to moisture. Electronic degradation and mechanical wear accumulate over time; proactive checks during scheduled service can help identify issues early.

Final Advice

This radio is intended for professionals and competent DIYers comfortable with dashboard disassembly and vehicle coding. When fitted and coded correctly, it restores factory radio functions and retains original vehicle appearance. If you require programming, ensure you have access to appropriate PSA diagnostic equipment or a qualified workshop to complete the pairing process.

OEM Continental RD4N1M head unit offering CD and MP3 playback, designed as a direct replacement for many Citroën and Peugeot models. This unit preserves original mounting, connectors and dashboard integration for a clean factory-like fit. Frequently searched by part numbers, it is intended for professional workshops and experienced DIY mechanics who perform vehicle electronics work and radio coding.

Technical Information

Manufacturer: Continental (Original Equipment for Citroën/Peugeot)
Model: RD4N1M CD
Product Codes: 9664769777, 657992
Additional Numbers: 657990, 657989, 657937, 657935, 657934, 6579PC, 96647697XT
Compatible Models: Citroën/Peugeot 207; 307 II; 807; C2; C3 I; C4; C8

Fitment And Use

This unit is an OEM-style replacement for the listed Citroën and Peugeot models. It mounts into the original radio slot and uses factory wiring plugs, retaining steering wheel control compatibility when properly coded. Many customers locate this radio by its product codes, so check the part number against the unit being replaced before installation.

Installation Recommendations

Before starting, always disconnect the negative battery terminal to avoid risk of short circuits or damage to vehicle electronics. Typical replacement steps:

• Carefully remove trim panels around the radio using appropriate plastic pry tools to avoid damaging the dash.
• Unscrew and slide the radio out of the cage, then disconnect antenna, power and speaker connectors.
• Transfer any brackets or harness adapters if required and connect the new unit in reverse order.
• Reconnect the battery only after the unit is secured and connectors are in place.

After mechanical installation, the radio must be programmed to the vehicle using diagnostic equipment to restore full functionality (coding and security pairing). If you do not have the required diagnostic tool, have the coding performed by a qualified workshop with PSA diagnostic capability.

Why Units Fail And Typical Lifespan

Head units like the RD4N1M can remain functional for many years, but failure rates increase with age and operating conditions. Common causes of malfunction include:

• Heat and prolonged sun exposure causing electronic component degradation.
• Moisture ingress or corrosion at connectors.
• Mechanical wear of the CD mechanism (sticking, skipping or failure to read discs).
• Power surges or interrupted supply during battery changes or jump starts causing software lockups.
• Aging capacitors or solder joints inside the unit.

Regular use, clean environment and careful battery handling extend service life.

Recommended Tools And Skills

Ideal for professional mechanics or experienced DIYers. Recommended tools include trim removal tools, Torx/screwdriver set and, for final commissioning, PSA-compatible diagnostic tool for coding. If steering wheel controls or other integrated functions are not working after installation, diagnostic coding is required.

Notes On Programming

This radio requires diagnostic programming to the vehicle to restore full functionality and security pairing. Make sure coding and initialization are performed by personnel with appropriate diagnostic equipment and experience.

Why Choose This Unit

If you want a factory-fit radio with CD and MP3 playback for your Citroën or Peugeot, the Continental RD4N1M offers direct compatibility with original dashboard integration and connector layout. Purchasing by part number listed above is common practice and helps ensure you receive the correct replacement unit.

High-quality Continental RD4N1M-03 CD/MP3 radio designed for many Stellantis Citroën and Peugeot models. This OE-style head unit is commonly searched by part numbers (96662669XT, 96662669XT03, 16077504XT) and fits vehicles where the RD4 system was originally specified. Ideal for mechanics and DIY enthusiasts who need a reliable replacement radio that preserves original functionality and vehicle aesthetics. The unit supports CD and MP3 playback and integrates with the vehicle’s factory wiring harness and steering wheel controls where applicable.

Compatibility

• Peugeot 207
• Peugeot 307 (II)
• Peugeot 807
• Citroën C2
• Citroën C3 (I)
• Citroën C4
• Citroën C8

Technical Information

• Manufacturer: Continental (Produced for Stellantis)
• Model: RD4N1M-03
• Product Codes: 96662669XT, 96662669XT03, 16077504XT
• Other Numbers: 6574PW, 6574PX

Installation Recommendations

• Always disconnect the battery before starting removal or installation to avoid electrical damage.
• Remove trim panels and unscrew the radio using appropriate radio removal keys or tools. Carefully pull the unit forward and disconnect the wiring harnesses and antenna connector.
• Check connector pins and wiring for corrosion or damage before mating the replacement unit.
• After physical installation, the radio must be coded/registered to the vehicle using PSA diagnostic tools (DiagBox/PP2000) to restore full functionality (radio enable, steering wheel control mapping, etc.).
• Test all functions (radio reception, CD/MP3 playback, steering wheel controls, mute/phone integration if present) before reassembling the trim.

How To Replace (Practical Steps)

1. Disconnect the negative battery terminal and wait a few minutes.
2. Remove surrounding trim and fasteners to access the head unit.
3. Use radio keys or appropriate tools to extract the RD4 unit from the dash.
4. Unplug the main wiring connector, antenna cable and any auxiliary plugs.
5. Install the replacement unit by reversing the removal steps, reconnect connectors and secure the radio.
6. Reconnect the battery and perform diagnostic coding with DiagBox/PP2000 to pair and activate the unit.

Most Common Failure Reasons

• Electrical Issues: Blown fuses, power surges or poor ground connections can cause loss of power or erratic behavior.
• Connector Corrosion: Moisture or road salt can corrode harness pins, leading to intermittent faults or audio dropouts.
• Mechanical Wear: The CD mechanism and loading tray are mechanical parts that wear over time and commonly fail on older units.
• Software/Locking: Unit may require diagnostic coding or unlocking after replacement; without coding the radio may be disabled or limited.
• Physical Damage: Impact, water ingress or exposure to high temperatures can permanently damage internal components.

Why Choose This Unit

Replacement RD4N1M-03 radios are a practical choice for maintaining factory appearance and integration. Supplying the correct part number (e.g., 96662669XT) in searches increases the chance of finding a direct-fit unit. For workshop efficiency, keep diagnostic equipment (DiagBox/PP2000) on hand to complete the coding step and avoid return visits.

Looking for a dependable car radio for your Citroën or Peugeot? This Continental RD4 N1M-03 car radio is a perfect replacement unit compatible with Citroën models Berlingo, C3, C3 Picasso, C4, C4 Picasso, C8, as well as Peugeot 207, 307, 807, and Partner. It delivers excellent sound quality and reliable functionality to enhance every drive.

Note that after installation, the radio must be programmed to the vehicle using a diagnostic tool to ensure full compatibility and operational performance. It is highly recommended to have this procedure performed by a professional to properly integrate the radio into your car’s system.

Technical Information

• Manufacturer: Continental
• Model: RD4 N1M-03
• Product Codes: 98032842XT, 16112066XT
• Additional Numbers: Please verify that the product codes match your vehicle’s requirements before purchase.

This radio’s compatibility with multiple Citroën and Peugeot models makes it a practical choice for many drivers. Enjoy your favorite music, podcasts, or audiobooks with the clear and balanced sound this unit provides. Proper installation and diagnostic programming are essential to maintain warranty conditions and optimal performance.

Take advantage of this opportunity to equip your vehicle with a quality audio component at an affordable price. Sound quality and reliability are our top priorities, which is why we offer only tested and functional products. Join the many satisfied customers who have trusted our services.

The Blaupunkt RD4 N1 MP3 Car Radio is tailored specifically for a variety of Citroën and Peugeot vehicles, including popular models such as Citroën Berlingo III, C2, C3, C4, C8, and Peugeot 207, 307, 407, 807, and Partner III. Known for its reliable audio performance, this radio supports MP3 playback to enhance your driving experience.

Installation and Compatibility

Installation of the Blaupunkt RD4 N1 radio requires precise vehicle coding through diagnostic equipment to ensure full integration with your car’s existing systems. This step aligns the radio’s functionalities with your vehicle’s computer and security features, which is critical for vehicles in the PSA group to prevent system errors or security blocks.

Common Issues and Maintenance

This radio unit, like many OEM parts, may eventually require replacement due to motherboard failures or software incompatibilities. Regular diagnostics during vehicle servicing can help identify radio issues early. Proper coding after installation is essential to restore full functionality and prevent system malfunctions.

Technical Information

• Manufacturer: Blaupunkt
• Models: Citroën Berlingo III, C2, C3, C4, C8; Peugeot 207, 307, 407, 807, Partner III
• Product Codes: 9665918977, 657930, 1614201480
• Additional Numbers: Compatible with PSA Group diagnostics and vehicle-specific integrations

This antenna is designed specifically for Peugeot 207 and 207 II models, offering a reliable replacement option for damaged or malfunctioning original equipment. With product codes 9665549680 and 6561TS, it guarantees compatibility and maintains the performance of your vehicle’s radio system.

Essential for clear radio signal reception, the antenna is commonly replaced due to damage caused by car washes or accidental mishandling. Installation is straightforward and can be completed at home with minimal tools, saving you service costs while restoring optimal radio performance.

Technical Information

Manufacturer: PSA Citroën Peugeot
Models: Peugeot 207, 207 II
Product Codes: 9665549680, 6561TS, 6561W5
Additional Numbers: Not Specified

This genuine part ensures long-term durability and dependable functionality, making it a smart choice for automechanics and car enthusiasts performing their own repairs. Confirming compatibility with your vehicle model will help ensure seamless operation of your car radio and related components.

Restore your antenna to perfect working condition and enjoy uninterrupted listening to your favorite radio stations. Order now to benefit from competitive pricing and fast shipping!