Original motor cable harness (engine cabling) for 1.4 VTI Citroën/Peugeot engines. Suitable solution for problems with cracked conductors, oxidized pins or hardening insulation due to heat and oil. OEM codes: V759188680 and 658561. Thanks to the exact length of branches and original connectors, it ensures correct connection of sensors and action members without bastions and unnecessary search for defects.

This volume connects the engine control unit (ECU) with key components such as injectors, ignition coils, crankshaft and camshaft sensor, throttle, lambda probe, alternator and starter. Typical manifestations of damaged cabling are ignition outages, irregular idle, occasional engine dies, difficult starts or error -related error codes and interrupted circuits. Replacing a complete volume is often the fastest and most reliable way to eliminate these problems.

technical information

• Manufacturer: PSA Peugeot Citroën (OEM)
• Model: 1.4 VTI (EP3) – selected version of Citroën C3 II, C3 Picasso, C4 II; Peugeot 207, 308
• Product codes: V759188680
• Other numbers: 658561

Compatibility
The volume is designed for petrol engines 1.4 VTI 16V (EP3). To be sure, the correct assembly is recommended to compare the OEM numbers (V759188680, 658561), the shape and number of connectors with your original work and possibly verify the conformity according to the VIN. On some models there are variants of bundles according to equipment and year of production.

Mounting Recommendations
Always disconnect the negative pole of the battery before dismantling. Remove the original volume with regard to the guidance in original holders and bushings; Remove the new route, secure in the clips and pay attention to radiant heat (thermal sleeves and shields). Check the cleanliness and tightening of the skeletal points. After assembly, check the error code and basic adaptations as needed. The engine control unit (ECU) is not included.

Why choose an original bundle
The original cabling ensures the compatibility of the pins, the correct shielding and the lengths of the branches – this minimizes the resistance loss, the signal interference and the subsequent diagnostic “dead ends”. For 1.4 VTi engines, the original volumes suffer especially at bending and in connectors due to vibration and temperature; Quality replacement significantly reduces the risk of repeated defects.

Status
Used original part of disassembly, corresponding to age and normal operation. Suitable as a direct replacement of damaged cabling without the need to repair individual wires.

If you are searching for a high-quality engine wiring harness for your Peugeot 207 1.4i KFT model, you have come to the right place. We offer an original engine wiring harness with product codes 9672973280 and 9675247080, carefully removed from a 2011 Peugeot 207. This part is ideal for those aiming to maintain their vehicle’s authenticity or seeking a reliable replacement for damaged wiring.

The engine wiring harness is crucial for the correct operation of the engine and its components, ensuring uninterrupted electrical connections between various engine parts. Proper installation guarantees efficient communication of all engine electrical systems, which is essential for optimal vehicle performance.

Technical Information:

• Manufacturer: Peugeot
• Model: 207 1.4i KFT
• Product Codes: 9672973280, 9675247080, 6585N1, NFP
• Additional Numbers: The products are original and match the exact vehicle specifications.

This engine wiring harness is perfect for professional mechanics or home DIY enthusiasts looking for trustworthy and verified auto parts for repairing or maintaining a Peugeot vehicle. The installation is straightforward and does not require special tools, enabling quick and efficient replacement.

How often does this part fail? The engine wiring harness may require replacement due to damage caused by environmental factors, overloading, or vehicle aging. Replacing this part is necessary to maintain overall vehicle efficiency and safety. This original part ensures your vehicle operates like new again.

Don’t miss the opportunity to enhance your vehicle’s performance. Invest in the original engine wiring harness that perfectly fits your Peugeot 207 1.4i KFT and guarantees smooth operation of all engine functions. Order today!

Product Overview

Complete engine wiring harness designed for Citroën C3 II (second generation) with the 1.4i KFT engine. This harness integrates all primary sensor and actuator connections required for engine management, ignition, fuel injection and ancillary systems located in the engine bay. Built to match original routing and connector types, it streamlines replacement of damaged or worn wiring looms during engine repairs or swaps.

Applications

Intended For: Citroën C3 II (Second Generation) With 1.4i KFT Engine. Also compatible With Vehicle Equipment That Uses The Following Reference Numbers (See Technical Information).

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C3 II (Second Generation) 1.4i KFT
• Product Codes: 9675247080, 9673366680
• Additional Numbers: 6585J6, 6585N1, 9674808180

Key Features And Benefits

• Complete Loom: Includes main engine harness sections, sensor plugs, injector connectors, ignition leads interfaces and ground points for a direct replacement.
• OE-Style Connectors: Matches original connector types to ensure proper fit and electrical contact with engine sensors and actuators.
• Correct Routing: Retains factory routing to prevent chafing, heat exposure and interference with moving components.
• Time-Saving Replacement: Replacing the whole harness reduces troubleshooting time compared to repairing multiple individual wires or connectors.

Installation Recommendations

• Always Disconnect The Battery Before Starting Work To Avoid Short Circuits And Prevent Damage To Electronic Components.
• Document Existing Routing: Photograph The Harness Routing And Connector Positions Before Removal To Ensure Correct Reinstallation.
• Label Connectors: Mark Each Connector During Disassembly To Avoid Mismatches During Reconnection.
• Transfer Small Parts: When Applicable, Transfer Heat Shields, Clips And Brackets From The Old Harness To The New One If Not Supplied.
• Secure Routing: Fasten The Harness With Factory Clips Or Equivalent Fixings, Keeping The Loom Away From Exhaust And Moving Parts.
• Use Dielectric Grease On Exposed Connector Pins Where Appropriate To Reduce Corrosion Risk.
• Inspect Grounds And Earth Points: Clean And Torque Ground Bolts To Manufacturer Specifications To Ensure Proper Circuit Return.
• After Installation: Perform Basic Functional Checks (Ignition, Injector Signals, Sensor Readings) Before Final Assembly.

Common Causes Of Failure

• Mechanical Damage: Chafing Against Sharp Edges, Broken Clips Or Abrasion From Movement Are Frequent Causes Of Wire Failures.
• Heat And Ageing: Prolonged Exposure To Engine Heat Can Cause Insulation To Harden And Crack, Leading To Short Circuits Or Open Circuits.
• Oil And Fluid Contamination: Leaks That Soak The Loom Accelerate Insulation Degradation And Promote Connector Corrosion.
• Rodent Damage: Chewing By Rodents Is A Common And Sudden Cause Of Harness Failure.
• Moisture And Corrosion: Water Ingress Into Connectors Causes Poor Contacts And Intermittent Faults.
• Poor Previous Repairs: Low-Quality Splices Or Incorrectly Sealed Repairs Often Lead To Recurring Electrical Issues.

Why Replace The Entire Harness

Replacing The Complete Engine Wiring Harness Eliminates Hidden Or Intermittent Faults That Are Time-Consuming To Trace. It Restores Factory Routing And Connector Integrity, Reducing The Risk Of Further Failures Caused By Damaged Insulation Or Corroded Contacts.

Notes

This Harness Is Supplied With The References Listed In The Technical Information Section. Ensure Proper Installation Practices Are Followed And All Electrical Connections Are Clean And Secure For Reliable Operation.

Looking for a reliable and original Engine Wiring Harness for your Citroen C4 1.4 16V? Our selection of quality auto parts includes this critical component. The Engine Wiring Harness is a key element that ensures the seamless transfer of electrical signals between various engine parts. Its functionality is essential for the proper operation of the entire vehicle.

The wiring harness we offer comes directly from Citroën and Peugeot vehicles, ensuring high compatibility and performance. Whether you are a mechanic or performing repairs yourself, you’ll appreciate that this part is ready for immediate installation without the need for further modifications.

Technical Information:
Manufacturer: Citroën
Model: Citroën C4 1.4 16V
Product Codes: 9657360680, 9661638880, 9658575480, 9661638780, 6558ZY
Additional Numbers: Included within the technical specifications are alternative product numbers that may be useful when searching for compatible parts.

The Engine Wiring Harness is often a sought-after component for maintenance or repairs. With our product, you gain assurance that the electronic systems of your vehicle will function smoothly. The offered part has been carefully inspected and is ready for use, meaning that installation is relatively straightforward, allowing you to return to the road quickly.

This auto part is visually inspected, ensuring its good visual condition, even though it is used. Remember, although it is a used part, its functionality is of top-notch quality, which is crucial for safe driving in the automotive industry. If you have any questions or uncertainties regarding the compatibility of this product with your vehicle, do not hesitate to contact our customer support, which will be happy to provide the necessary information.

This complete positive engine wiring harness is designed specifically for the Peugeot 207 1.4 VTI model. The wiring harness plays a crucial role in maintaining a reliable and efficient electrical system by connecting the battery to various engine components. This ensures smooth engine start-up and stable electrical performance throughout vehicle operation.

Searching for quality auto parts for your Peugeot? This Positive Engine Wiring Harness is an ideal replacement part that guarantees optimal electrical system function, prolongs the vehicle’s service life, and helps reduce future repair costs. It is especially crafted for the 1.4 VTI engine variant, ensuring perfect compatibility and fit.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Peugeot 207 1.4 VTI
• Product Codes: 9686852980, 9664525280, 5642NW
• Additional Numbers: N/A

The wiring harness is subject to wear over time due to constant exposure to engine heat, vibrations, and electrical load. Regular inspection and timely replacement are recommended to avoid starting issues or electrical system malfunctions. While replacing the harness requires appropriate technical knowledge and tools, it can be performed by skilled DIY enthusiasts. However, professional installation by a qualified mechanic ensures maximum safety and performance.

Purchase this 100% functional part from us and save on repair costs while supporting sustainable vehicle maintenance. Enhance the reliability and longevity of your Peugeot 207 with our trusted wiring harness designed for seamless engine electrical connectivity.

Over time, engine wiring harnesses can experience wear and tear due to exposure to heat, vibration, and environmental factors. Symptoms of a failing harness may include engine misfires, electrical failures, or warning lights on the dashboard. Thus, timely replacement is crucial for maintaining your vehicle’s performance and reliability.

Technical Information

• Manufacturer: PSA
• Model: 1.4i KFV
• Product Codes: 9654034380, 9654808880, 9654034280
• Other Numbers: 9654034480, 6558XX NFP

Replacing the engine wiring harness is a critical maintenance task. Typically, this process involves disconnecting the battery, removing any protective covers, and carefully unplugging old wiring connections before installing the new harness. It is recommended for DIY mechanics and professionals to have a wiring diagram on hand to ensure proper installation.

Invest in the Engine Wiring Harness for your Peugeot or Citroen to ensure dependable engine performance and prolonged vehicle life.

Are you looking for a reliable engine wiring harness for your Peugeot 206+? We offer high-quality used auto parts that are the perfect solution for repairing and maintaining your vehicle. Our engine wiring harness for Peugeot 206+ 1.4i KFT is complete and ready for installation, enabling quick and easy replacement of old wiring.

The engine wiring harness is a vital component of the vehicle, ensuring the proper functioning of the engine’s electrical systems. Regular inspection and replacement when necessary is crucial for the long-lasting and efficient operation of the car. The wiring harness we offer is sourced from a 2011 Peugeot 206+ and is specifically designed for the 1.4i engine with the KFT engine code, ensuring perfect compatibility and performance.

Technical Information

• Manufacturer: Peugeot
• Model: 206+ 1.4i KFT
• Product Codes: 9670618880, 9675824080, 6585P6
• Other Numbers: NFP

This wiring harness is in excellent condition, ensuring its longevity and reliability. It is ideal for auto mechanics and DIY enthusiasts looking for replacement parts for their repairs or upgrades.

Get your car running perfectly again with our engine wiring harness for Peugeot 206+. For more information or assistance regarding installation, do not hesitate to contact our support. We look forward to your order and are ready to ensure that your car is in the best condition.

The complete engine wiring harness is crucial for the electrical connections of your engine, allowing for seamless communication between various components. Over time, wiring harnesses may deteriorate due to heat, wear, or exposed elements, leading to faults in performance. Regular inspection and replacement when necessary help maintain optimal engine function and safety.

When replacing the wiring harness, it’s important to follow proper installation procedures to ensure a secure fit and reliable operation. This component is specifically tailored to fit the following models:

• Peugeot 207
• Peugeot 307
• Citroen C3
• Citroen C4

Ensure your engine runs smoothly with the right wiring harness!

Technical Information

• Manufacturer: PSA Group
• Model: 1.4 VTI, 1.6 VTI
• Product Codes: V756813880
• Additional Numbers: 6569HX

When replacing your car’s battery cable, it is crucial to consider the cable’s integrity as it can deteriorate over time due to corrosion or wear, leading to electrical issues. Regular inspection is advised, especially in regions with extreme temperatures.

This cable not only provides reliable electrical connectivity but also helps in maintaining the overall performance of your vehicle. The ease of installation makes it a preferred choice for both professional mechanics and DIY enthusiasts.

Technical Information

• Manufacturer: Peugeot Citroen
• Model: C2 1.4i
• Product Codes: 9639978580
• Additional Numbers: 5642CE

Engine wiring harnesses are known to wear out due to exposure to heat, vibration, and the elements. It is advisable to replace them whenever you experience electrical issues or notice damage, as they play a crucial role in maintaining communication between important engine sensors and the ECU (Engine Control Unit).

When replacing the wiring harness, it’s essential to disconnect the battery and carefully follow the manufacturer’s guidelines to ensure proper installation. Regular inspections can help identify any wear and tear, helping to prolong the lifespan of your vehicle’s electrical systems.

Technical Information

• Manufacturer: PSA
• Model: 1.4i KFW
• Product Codes: 9670295780, 9660900080, 658581
• Additional Numbers: NFP