The original air conditioning controller (heating and ventilation control panel) for Peugeot 807. This is the part of the removal that has been tested and is fully functional. Thanks to the accurate OEM marking 14986790ZD and 6452G6, you can easily verify compatibility according to the label of your original episode.

Typical symptoms of defective panel are non -functional or omitting buttons, missing backlighting, spontaneous switching of modes, inability to control temperature or fan speed. By replacing the entire driver, you usually solve these problems faster and cheaper than a complex electronics repair.

As a rule, the assembly is simple: remove the center bracket frame, release the panel fastening screws, disconnect the connector (s) and deploy the spare part. It is recommended to compare the shape of the front panel, the number and type of connectors and of course the codes of the part before assembly. Parts with different numbers or designing equipment (eg differences in functions) may not be interchangeable.

The advantage of the original OEM part is the correct ergonomics of control, full compatibility with the vehicle’s on -board network and quality processing. As a part used, it can bear common signs of use, but functionality has been proven.

technical information

• Manufacturer: PSA Peugeot Citroën (OEM)
• Model: Peugeot 807; Also compatible with the Citroën C8 in agreement of the part number
• Product codes: 14986790ZD, 6452G6
• Other numbers: 6452.g6, 6452 G6, 14986790 ZD

To be sure, please compare the numbers on your original panel with the codes listed and check the photos. SEARCHED WORKS: PEUGEOT 807 air conditioning controller, air conditioning panel 6452G6, heating control 14986790ZD, Citroën C8 heating controller.

The controller is designed specifically for the Peugeot 807 and Citroën C8 models, ensuring compatibility and easy installation. With this original part, you can be assured that everything will work as it should, without unnecessary complications or modifications.

Technical Information:

• Manufacturer: PSA Peugeot Citroën
• Model: Citroën C8, Peugeot 807
• Product Codes: 1495745077, 6451TQ

This rear air conditioning and heating controller is a frequently sought-after part for both mentioned models, as it ensures a range of functions for managing climatic conditions in the rear of the vehicle. Its role is to maintain comfort for passengers in the rear seats, which you will appreciate especially on longer journeys and in extreme temperature conditions.

Your satisfaction is our priority, and therefore we thoroughly check and test every part to ensure it meets original specifications and provides seamless operation. Air conditioning and heating control is crucial for overall driving comfort, which is why it is worth uncompromisingly choosing quality and proven parts like this.

By purchasing this used part, you are not only getting a great price-to-performance ratio but also an eco-friendly option, contributing to the sustainable handling of auto parts and reducing automotive waste. Take a step towards better sustainability while ensuring that your vehicle continues to offer maximum comfort and functionality.

Are you searching for a reliable air conditioning controller for your vehicle? We offer a used but fully functional air conditioning controller specifically for Citroën C8 and Peugeot 807 models. This part ensures comfortable climate control directly from the rear seats, enhancing comfort for all passengers.

This air conditioning controller is an ideal solution for replacing the original part, which may fail over time due to wear on mechanical or electronic components. Being an original part with OEM numbers 14011523ZD and 6452G5 guarantees high compatibility and functionality without the need for modifications.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C8, Peugeot 807
• Product Codes: 14011523ZD, 6452G5
• Additional Numbers: N/A

This controller is easy to install and provides seamless handling of climate and heating settings in the vehicle. By adding this part to your automotive service offerings or personal vehicle fleet, you will maintain the original functions of the car expected from premium brands like Citroën and Peugeot.

Replacement parts like this air conditioning controller are essential for maintaining comfort during your travels, and you can be assured that you are receiving quality that meets your needs. Allow your car to be fully functional again with our professionally tested and prepared air conditioning controller.

Order this key part today and ensure your Citroën C8 or Peugeot 807 is equipped with a reliable and operational air conditioning control system for the future.

This replacement heating and air-conditioning control unit is compatible with Peugeot 807 and Citroën C8 models up to 2005. Ideal for professional workshops and DIY mechanics, the unit restores user control over temperature, fan speed, air distribution and air-conditioning engagement. Commonly searched by part numbers 14874990YR, 6451KJ, 6451KK or 9140010393, this controller is a direct-fit component that helps solve intermittent control loss, unresponsive buttons or faulty displays.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 807 (up to 2005), Citroën C8 (up to 2005)
• Product Codes: 14874990YR, 6451KJ, 6451KK
• Additional Numbers: 9140010393, NFP

Function And Application

The control unit manages cabin temperature settings, blower fan speeds, air distribution (vents/floor/defrost), recirculation mode and A/C request signals to the compressor clutch. It translates user inputs (knobs, sliders or buttons) into electrical commands for HVAC actuators and the vehicle network, and drives the on-board display and indicator lights. Proper operation is essential for cabin comfort and correct climate system behaviour.

Common Faults And Causes

• Wear Of Switches And Potentiometers: Frequent physical use causes mechanical wear or loss of contact, leading to intermittent or non-responsive controls.
• Display Or Backlight Failure: Aging displays or failed LEDs can make settings unreadable.
• Corroded Connectors And Water Ingress: Moisture reaching the unit or connector corrosion causes poor connections or short circuits.
• Cold Solder Joints And PCB Fatigue: Thermal cycling can create micro-cracks on solder joints, producing intermittent faults.
• External Related Failures: Faulty blower motor, resistors or actuators may be misdiagnosed as control unit faults — check associated components.

Replacement Procedure

Typical replacement steps for experienced technicians or competent DIY mechanics:

• Disconnect The Battery Before Starting Work To Avoid Short Circuits And Protect Electronics.
• Remove Trim Panels Around The Center Console Carefully Using Trim Tools To Prevent Damage.
• Unscrew The Fasteners Securing The Control Unit (Often Phillips Or Torx) And Slide The Unit Out Gently.
• Unplug All Electrical Connectors By Releasing Their Tabs; Inspect Pins For Corrosion Or Damage.
• Install The Replacement Unit, Reconnect Connectors And Refit Fasteners And Trim Panels.
• Reconnect The Battery And Verify All Functions: Fan Speeds, Temperature Regulation, A/C Engagement, Recirculation And Display Operation.

Installation Recommendations

• Always Disconnect The Battery Before Removing The Unit.
• Use Appropriate Trim Tools To Avoid Breaking Dash Clips Or Surrounding Plastic.
• Inspect Connectors And Wiring For Heat Damage Or Corrosion; Clean Contacts And Apply Dielectric Grease If Needed.
• Avoid Excessive Force When Removing Or Inserting Connectors; Ensure Retaining Clips Are Fully Engaged.
• After Installation, Cycle Through All Modes To Confirm Correct Communication With HVAC Actuators.

Why This Part Fails Most Often

High usage, long-term exposure to temperature changes and humidity, combined with ageing plastics and electronic components, are the primary reasons these control units fail. Repeated mechanical action on knobs and buttons wears contacts, while moisture or condensation can corrode connectors and PCBs. Solder joint fatigue from thermal cycling is another frequent issue on older vehicles.

If you are searching by part number, try any of the listed codes (14874990YR, 6451KJ, 6451KK, 9140010393) to quickly locate the correct unit for Peugeot 807 and Citroën C8 models up to 2005. Suitable for professional fitment or confident DIY replacement.

Over time, climate control units can experience wear and tear, leading to malfunctions. Common issues include unresponsive buttons, or incorrect temperature regulation. Regular maintenance helps alleviate these problems, but eventually, replacement is necessary to restore functionality.

The installation of the Air Conditioning Controller is straightforward and can be performed by both professional mechanics and DIY enthusiasts. It typically involves removing the dashboard panel and replacing the old unit with the new one, following proper disconnection procedures to ensure safety and accuracy.

Technical Information

• Manufacturer: Peugeot
• Model: 807
• Product Codes: 14011591ZD, 6452G9
• Additional Numbers: Not Applicable

This part is particularly prone to wear due to constant usage and fluctuations in temperature, which can cause issues over time. Frequent replacements may be necessary to maintain functionality and comfort in your vehicle.

When replacing this component, it’s advisable to disconnect the battery and follow specific model guides for installation, ensuring a secure fit and alignment.

Technical Information

• Manufacturer: PSA CITROEN PEUGEOT
• Model: Citroën C8, Peugeot 807
• Product Codes: 1488941077, 6451KL
• Additional Numbers: NFP