Product Overview

High-quality gear shift knob with attached gaiter designed for Citroën C3 II (A51) and DS3 models. Finished in Black Mistral and marked as CARLA (V210 HZD), this knob combines factory-style appearance with a direct-fit replacement for vehicles using the same original equipment specifications. Commonly searched under part numbers 2403CL and 7591CC, the unit is a practical choice for mechanics and DIY enthusiasts looking to restore interior look and tactile feel.

Fitment and Compatibility

Fits: Citroën C3 II (A51) and DS3 models that use the CARLA-style shift knob. Verify part numbers 2403CL or 7591CC against your vehicle’s existing knob marking when possible. The knob is intended for manual gear levers where the original CARLA/V210 HZD trim was fitted.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C3 II (A51); DS3
• Product Codes: 2403CL, 7591CC
• Other Numbers: Not Specified

Installation Recommendations

Installation is straightforward for experienced mechanics and competent DIYers. Typical procedure:

• Inspect surrounding trim and ensure the vehicle is parked with the handbrake on.
• Carefully detach the gaiter from the console retaining ring (use plastic trim tools to avoid damage).
• Depending on the original fixing, the knob may be threaded, held by a retaining clip, or secured with a grub screw under the gaiter—remove the securing element before extracting the old knob.
• Position the new gaiter and knob assembly onto the gear lever, align correctly, and refit the original fastener or clip. Ensure the gaiter is seated into the console retaining ring to prevent movement or rattling.
• Check gear lever operation through the full range of gears to confirm there is no interference.

Use protective gloves and trim tools to prevent scratches to surrounding surfaces. Tighten any fastening points to the manufacturer’s torque specs if applicable.

Common Failure Reasons

Shift knobs and gaiters typically fail or degrade for the following reasons:

• Wear From Use: Constant handling causes surface wear, gloss loss, and eventual cracking of plastic or leather components.
• Gaiter Deterioration: Gaiters can tear, stiffen, or shrink due to age, UV exposure, and temperature cycles.
• Mechanical Damage: Excessive force, impact, or improper removal/installation can break internal clips or threaded inserts.
• Contaminants: Oils, grease, and cleaning chemicals can accelerate material degradation and discoloration.
• Loose Fixings: Worn internal inserts or broken retaining clips lead to knob play or rotation.

Signs You Should Replace The Knob

• Visible cracks, gouges, or worn finish on the knob surface.
• Torn, split, or detached gaiter exposing the gear lever boot area.
• Excessive lateral play or rotation of the knob during gearchanges.
• Unpleasant odors or degraded material consistency in the gaiter.

Why Choose This Part

This CARLA V210 HZD Black Mistral knob offers a factory-matching appearance and fit, restoring interior aesthetics and driver feel without the need for trim modification. Including the intact gaiter saves time during installation and avoids extra purchases.

Additional Notes

Part numbers 2403CL and 7591CC are commonly used in searches; include them when looking up compatibility or comparing replacements. Always follow safe workshop practices and use appropriate tools when removing interior trim and components.

Looking for durable and reliable auto parts for your Peugeot 207? Our gear shift lever with cables, original part number 9685232980 and secondary number 2400JZ, is the perfect solution for repairing or replacing a damaged gear shifting mechanism. This component was taken from a low-mileage car, guaranteeing minimal wear and extended durability.

This gear shift lever with cables is specifically designed for Peugeot 207 models, ensuring seamless compatibility and functionality. The cables are essential components for precise and smooth gear shifting, making their quality critical for your vehicle’s proper operation.

Technical Information:

Manufacturer: Peugeot
Model: Peugeot 207
Product Codes: 9685232980, 2400JZ
Additional Numbers: Not specified

Wondering about durability or why you should consider replacing your gear shift lever? Gear shift levers and cables are frequently subjected to high mechanical stress, which can cause wear over time. Replacing this part can significantly improve driving feel and increase safety during gear changes. Our used parts are carefully inspected to ensure flawless functionality in your vehicle.

Your satisfaction and safety are our top priorities. Make sure to choose quality and verified parts for your vehicle. This component is an excellent choice for anyone seeking reliability, compatibility, and performance at an affordable price.

Ideal for professional mechanics and car enthusiasts performing their own repairs, this part offers an excellent balance between price and quality. The gear shift lever and cables play a crucial role in the transmission system, enabling safe and comfortable driving by facilitating efficient gear engagement.

Technical Information

• Manufacturer: Citroën, Peugeot
• Model: Citroën C3, C4 Cactus, C-Elysée, Peugeot 208, 301, DS3
• Product Codes: 9808161480, 9837816580
• Additional Numbers: Not available

Replacing worn gear shift levers and cables helps prevent common transmission issues such as stiff or inconsistent shifting. This part is engineered to match the original specifications and dimensions, ensuring easy installation and flawless operation. Investing in high-quality replacement parts guarantees long-term safety and optimal vehicle condition.

Shop confidently and keep your vehicle in excellent condition, ready for daily commutes or longer journeys with dependable transmission components.

We offer an exceptional Automatic Gear Shift Lever, perfect for Citroën and Peugeot models. This high-quality part is just what you need to restore the functionality and smoothness of shifting in your vehicle. It is ideal for mechanics and DIY enthusiasts looking for a reliable solution at an affordable price.

This component ensures smooth and precise shifting, which is critical for a comfortable ride and the long-term sustainability of your automobile. It is perfect for those who want to repair or enhance their vehicle’s shifting system without the necessity of investing in an entirely new part. Being an original component, you can be assured of its compatibility and performance.

Technical Information:
Manufacturer: PSA Citroën Peugeot
Model: Citroën C3 III, DS3, Peugeot 208, Citroën C4 Cactus
Product Codes: 9814628080
Additional Numbers: Not specified

If you are looking for a reliable and affordable way to restore or improve the shifting system in your vehicle, our offering is precisely for you. With our Automatic Gear Shift Lever, your car gains a new lease on life, and you will be able to drive with confidence and peace of mind once again. This shift lever has been a proven choice for many Citroën and Peugeot models, making it the ideal option for your next repair or maintenance.

With our gear shift lever, you will achieve the restoration of optimal functionality and shifting smoothness, which are key to safe and comfortable driving. Do not neglect essential components of your vehicle – choose the quality we offer, and enjoy hassle-free driving with confidence in the reliability of all components.