water hoses of the cooling circuit for Citroën C1 and Peugeot 107 with 1.0 1 Kr (1KR – FE). Thanks to the OE number 1343HN, you can easily verify compatibility according to the production label or VIN. This is the part used in very good condition, ideal as a quick and cost -effective replacement for a damaged or weathered hose.

The

hose ensures the coolant circulation between the engine and the cooler/heating circuit. The replacement is recommended for cracks, softening of the material, spots from buckles or signs of leakage (wet spots, sweet smell of refrigerant, frequent liquid filling). In these small three -cylinder 1, the material of the hoses is tired due to time and thermal stress; leaks often appear in areas at the neck of the radiator or thermostat.

Installation is a direct replacement piece per piece. Recommended procedure: Drain the coolant, release the buckles, disconnect the old hose and clean the bearing surfaces. Put the new hose without twisting, use the new clip of the correct width and torque of the tightening, add the liquid according to the manufacturer’s specifications and vent the system carefully. Check tightness after the first rides. Buckles are not included.

Technical information

• Manufacturer: PSA / Citroën Peugeot
• Model: Citroën C1 (I, 2005–2014) 1.0 1KR-FE; Peugeot 107 (I, 2005–2014) 1.0 1kr-Fe
• Product codes: 1343Hn; 1343.Hn
• Other numbers: 1343 HN (alternative notation)

Before ordering, compare the shape and outlet with your original hose and verify according to OE code 1343n/1343.Hn. If you are unsure, send us a wine – we will be happy to check compatibility. This hose is designed for cars with 1.0 1KR engine, typically Citroën C1 and Peugeot 107 first generation.

Original water hose cooling for Citroën C1 and Peugeot 107 with 1.0 gasoline (1KR). It is a used OEM part of primary production, which maintains the correct shape, length and diameters for trouble -free mounting and tightness in the cooling circuit. Ideal replacement for leakage of coolant, cracks or weakening of the original hose.

Function: The main task of the hose is to reliably guide the coolant between the engine and the cooler/heating circuit. In older cars, these hoses often suffer from aging material, micro -cracks, hardening, swelling or damage at the buckle site. The manifestation is a gradual loss of liquid, wet tracks in the engine compartment, sweet smell of glycol and engine overheating.

Mounting and recommendations: Before installing, compare the shape and connection diameters with the original part. Replace the hose buckles with new ones, check the signs and sealing surfaces. After replenishing the coolant according to the manufacturer’s specifications, heat the car to the operating temperature and blend the system carefully; Then check the leaks and levels of the liquid after a test drive. Proper assembly and venting minimizes the risk of overheating and extends the life of the entire cooling system.

To be sure of compatibility, we recommend verifying the part number according to the original hose or by VIN before purchasing. This episode is often sought under OEM PSA 1351HL in different entries below.

technical information

• manufacturer: dog/original part Citroën -peugeot
• Model: Citroën C1 (I, about 2005–2014), Peugeot 107 (I, about 2005–2014), Motor 1.0 1kr
• product codes: 1351hl, 1351.hl
• additional numbers: 1351 hl, 1351 -l

Advantages of the original hose: accurate compatibility with 1.0 1KR engine, correct rigidity and shaping for solid seating, temperature and coolant resistance. Saving costs thanks to the use of the original part in good condition and a quick solution of leaks without the need for unoriginal modifications.

Commonly, the water hose may need replacement due to wear and tear from high temperatures and pressure variations. It’s crucial to monitor its condition, as a damaged hose can lead to coolant leaks, reduced heating efficiency, and potential engine overheating.

The replacement process is straightforward: first, release the pressure in the cooling system, then carefully detach the old hose from its fittings, and finally, install the new hose, ensuring secure connections to avoid leaks.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: C1, 107
• Product Codes: 6466FR
• Additional Numbers: N/A

Regular wear and tear from high temperatures and pressure can cause these hoses to degrade over time. It is advisable to inspect the water hose periodically and replace it every few years or at the first signs of leakage to prevent engine overheating and ensure the longevity of your vehicle.

This specific model, part number 6466FQ, meets or exceeds OEM specifications, ensuring a perfect fit and reliable performance.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C1, Peugeot 107
• Product Codes: 6466FQ
• Other Numbers: N/A