Original air conditioning compressor from OE supplier Denso for PSA group cars (Citroën/Peugeot). This is a used part suitable as a full replacement for the original unit with the same code. An ideal choice for professional auto mechanics and DIYers looking for the exact part by OEM numbers and model designation.

This type of compressor ensures the circulation and compression of the R134a refrigerant in the air conditioning circuit and ensures fast and efficient cooling of the interior. Denso parts are normally fitted from the factory at PSA, which means accurate fit, correct pulley geometry and seamless compatibility with existing piping and wiring as long as the part numbers match.

The component was used in selected versions of the following models (according to equipment and engine): Citroën C5 II and C5 III (X7), C4, Berlingo B9; Peugeot 308 (T7), 407, 607, Partner III (B9). For 100% match verification, always compare the OEM codes with the original part from your car or by VIN.

Typical symptoms of a compressor failure include: A/C not cooling even after filling, metallic noises/rattles from the engine accessory area, contamination of the system with metal clips, oil leaking from the compressor body, or the clutch not engaging (for versions with an electromagnetic clutch). In such cases, replacing the compressor is the most common and safe solution.

Installation recommendations: when replacing, always check the cleanliness of the circuit, flush the pipes and condenser (if structurally possible), replace the dryer/dehydrator and O-rings, check the expansion valve. Observe the correct type and amount of oil for Denso (ND-OIL 8, equivalent to PAG 46) and vacuum the system before filling with refrigerant. This will significantly reduce the risk of re-damaging the newly installed compressor.

Technical information

• Manufacturer: Denso
• Model: 6SEL16
• Product codes: 447190-8122; 9826268480; 6453WH
• Other numbers: 4471908122; 447 190 8122; 982 626 848 0; 6453 WH

For the correct selection, follow the given codes above all. If the numbers match your original supercharger, the part will fit without modification. In case of doubt, we recommend also comparing the shape and location of the connections, the type of pulley and the control/clutch connector.

By choosing this original Denso compressor, you get a reliable solution with a long service life and simple installation. Thanks to the exact matching of codes, you will minimize downtime and speed up air conditioning repair on Citroën and Peugeot cars.

This compressor model is well-regarded for its durability and longevity. While this unit is pre-owned, it remains fully functional, allowing you to maintain your vehicle’s AC system efficiently without the need to invest in a brand-new component. Proper installation by professional mechanics is recommended to achieve optimal performance and reliability.

Technical Information

Manufacturer: Sanden
Model: SD7C16
Product Codes: 9656572680, 6453WY, 6453VG, 648779, 648780
Additional Numbers: Commonly used with internal identification codes for easy tracking in recycling and service systems.
Compatible Vehicle Models: Citroën C5 II, Citroën C5 III, Peugeot 407, Peugeot 607.

This compressor plays a critical role in the air conditioning system by compressing the refrigerant gas, enabling it to circulate and absorb heat from the vehicle cabin. Failure of the compressor often results from wear over time, leaks, or internal mechanical faults. Replacing a faulty compressor with this model ensures your AC system performs efficiently and extends its operational lifespan.

Maintaining a functional and efficient air conditioning system is essential not only for driver and passenger comfort but also for safe driving conditions in extreme temperatures. Choose this Sanden SD7C16 AC compressor to restore your vehicle’s climate control system with confidence and cost-effectiveness.

Technical Information:

Manufacturer: Sanden
Model: SD7C16 1310F
Product Codes: 9663315480, 6453WY, 648779, 648780
Additional Numbers: 6453VG
This compressor model is compatible with Citroën C5 generations II and III, as well as Peugeot 407 and 607. It offers high efficiency and reliability, essential for the smooth operation of the vehicle’s air conditioning system.

The air conditioning compressor is one of the core components responsible for compressing and transporting refrigerant. Its proper function is crucial for efficient cooling of the vehicle’s interior. Choosing a high-quality, well-maintained compressor guarantees lasting performance and trouble-free operation. This specific unit ensures your air conditioning system will operate efficiently and reliably once replaced.

Its origin from a vehicle with relatively low mileage is a positive indicator of minimal wear and good preservation. This product is an excellent choice for mechanics and car enthusiasts seeking a cost-effective solution to restore air conditioning performance.

The Sanden SD7C16 air conditioning compressor is a trusted component designed specifically for Citroën and Peugeot vehicles. If you’re looking for a dependable compressor that ensures a perfectly functioning AC system without the high cost of new parts, this unit is an excellent choice. It fits a wide variety of models, providing versatile application for many popular cars in the PSA group.

Technical Information

• Manufacturer: Sanden
• Model: SD7C16 1304
• Product Codes: 9648238480, 6453WY, 6453VG, 648780
• Additional Numbers: 1304

Function and Application

Air conditioning compressors play a pivotal role in your vehicle’s climate control system. They circulate refrigerant, enabling cooling by compressing the gas and allowing heat exchange, which is essential for maintaining comfort during hot weather. The SD7C16 model is well-regarded for its durability and long service life.

Common causes for compressor replacement include shaft seal failure or refrigerant leakage, which can compromise system efficiency. Choosing a high-quality compressor is vital to restore optimal AC operation quickly and reliably.

Installation and Compatibility

This Sanden SD7C16 compressor is suitable for both professional mechanics and DIY car enthusiasts. Installation is straightforward and generally does not require specialized tools, making the replacement process quick and effective.

It is compatible with popular models including the Citroën C5 (II and III generations) and Peugeot 407, guaranteeing broad usability across these vehicle lines.

Why Choose This Compressor?

Opting for this Sanden compressor helps maintain your vehicle’s air conditioning performance at an affordable cost. The unit offers excellent value while meeting functional demands for cooling even in the hottest months.

Ensure your Citroën or Peugeot delivers comfort and reliability with this trusted Sanden SD7C16 air conditioning compressor.

The Sanden SD7C16 1300F air conditioning compressor is a direct-fit compressor designed for a range of PSA Group vehicles. It compresses and circulates refrigerant in the A/C system, driven by the engine belt and engaged by an electromagnetic clutch. This unit carries OEM identification numbers often used to locate the correct replacement part: SD7C16, 1300F, 9656572480 and 6453RA.

Fitment And Compatibility

This compressor is suitable for various CitroËn and Peugeot models that use the SD7C16 family of compressors. Common applications include CitroËn C5 (II and III generations) and Peugeot 407 and 607 models. Always cross-check the OEM product codes 9656572480 and 6453RA against your vehicle’s VIN or existing part number to confirm fitment.

Installation & Maintenance

Replacement should follow workshop best practices. Typical high-level steps:

1. Recover refrigerant from the system using certified equipment (legal requirement in many regions).
2. Disconnect the battery, remove drive belt and electrical connector to the compressor clutch.
3. Unbolt the compressor from its mounting bracket and remove lines (cap or plug to limit contamination).
4. Replace the compressor; whenever the compressor is replaced, replace the receiver-drier/accumulator and, where applicable, expansion valve or orifice tube, and fit new O-rings lubricated with the correct PAG oil quantity.
5. Evacuate the system with a vacuum pump to remove moisture and air, then recharge with the manufacturer specified refrigerant and oil volume.

If you are not qualified to handle refrigerants, have the replacement performed by a certified technician. Incorrect oil quantity or improper evacuation can cause premature failure.

Common Failure Modes

• Bearing wear and noise due to long service life or contamination.
• Clutch failure or electrical connection faults preventing engagement.
• Internal seal degradation leading to refrigerant or oil leaks.
• Contamination from a failing A/C system (metal particles) causing internal damage.

Service life depends on usage, maintenance history and operating conditions; compressors commonly last many years but can fail earlier if contaminated or starved of lubrication.

Technical Information

• Manufacturer: Sanden
• Model: CitroËn C5 (2006) 2.0 16V; fits PSA CitroËn and Peugeot models including C5 II, C5 III, 407, 607 (verify OEM numbers)
• Product Codes: SD7C16, 1300F, 9656572480, 6453RA
• Additional Numbers: NFP

Notes: Use the listed OEM codes to confirm exact compatibility with your vehicle. Replacement of the receiver-drier/accumulator and system evacuation are recommended whenever the compressor is changed to ensure long-term reliability and system performance.