This air conditioning (A/C) climate pipe is a direct-fit replacement designed for mechanics and experienced DIY enthusiasts working on Citroën C4 and Peugeot 307 vehicles with the 2.0i engine. Often searched by part number, this A/C line helps restore proper refrigerant flow in the climate system and is an economical option when diagnosing and repairing leaks or degraded connections. Clear identification by OEM codes speeds up ordering and ensures you get the correct pipe for the job.

Function And Application

The climate pipe carries refrigerant within the vehicle air conditioning system and connects fixed components of the A/C circuit. It maintains a sealed pathway for refrigerant under pressure and includes connection points where seals and clamps ensure leak-free performance. Proper function is essential for cooling efficiency and system reliability.

Benefits For Mechanics And DIYers

– Direct-fit replacement for straightforward installation using standard workshop tools.
– Commonly searched and ordered by part numbers 9656286280, 6460PV, 6460XQ for fast identification.
– Restores sealed refrigerant flow, reducing time spent locating hard-to-find leaks.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C4; Peugeot 307 (vehicles with 2.0i engine)
• Product Codes: 9656286280, 6460PV, 6460XQ
• Additional Numbers: 6460PV, 6460XQ, 9656286280

Installation Recommendations

Correct installation is critical for a reliable air conditioning repair. Follow these guidelines:

• Recover refrigerant from the system with approved A/C recovery equipment before disassembly. Handling refrigerant requires certified tools and, where applicable, certified personnel.
• Replace all associated O-rings and seals at connection points. Lubricate new O-rings with the correct refrigerant oil to ensure proper sealing and longevity.
• Inspect mounting brackets, clamps, and adjacent hoses for corrosion or damage and replace as needed.
• After fitting the new pipe, perform a vacuum and pressure test, then recharge the A/C system to the manufacturer’s specifications.
• Check the repair for leaks using an electronic leak detector or UV dye method and confirm system pressures and cooling performance during a test run.
• Observe general workshop safety procedures and use appropriate personal protective equipment.

Why This Part Most Commonly Fails

Climate pipes typically fail due to age-related degradation, mechanical stress, and environmental exposure. Common causes include:

• Corrosion at metal joints and fittings, especially in regions exposed to road salt or moisture.
• Cracking or hardening of rubber sections and O-rings caused by heat cycles and oil contamination.
• Vibration and rubbing against adjacent components leading to abrasion or fatigue.
• Improper installation or reused seals that allow slow refrigerant leaks to develop.

Notes For Ordering

Search by OEM numbers 9656286280, 6460PV or 6460XQ to quickly locate the correct climate pipe for Citroën C4 and Peugeot 307 (2.0i). Including these part codes in your listing increases the chance customers find the product via search engines and direct part-number queries.

This air conditioning pipe is designed to replace the original refrigerant line on Citroën C4 and Peugeot 307 vehicles equipped with the 2.0i engine. Built to restore proper refrigerant flow between A/C components, the pipe helps the system reach optimal cooling performance and prevents leaks that lead to reduced efficiency or loss of cooling. Commonly searched by part numbers, this item is ideal for professional mechanics and competent DIY enthusiasts who perform A/C repairs and system maintenance.

The part routes refrigerant between key A/C components and is manufactured to match the fit and connections of the original equipment. Using the correct replacement pipe ensures proper sealing at O-rings and quick connectors, preserves system pressure, and reduces the risk of contamination entering the circuit during service.

Technical Information

• Manufacturer: Stellantis
• Model: Citroën C4; Peugeot 307
• Product Codes: 9650629880; 6460NC
• Other Numbers: NFP

Recommended Installation

• Recover Refrigerant Safely: Before removing the pipe, evacuate the refrigerant using certified recovery equipment. If You Are Not Certified, Have The Procedure Performed By A Qualified Workshop.
• Inspect And Replace Seals: Replace Associated O-Rings And Seals With New, Lubricated Parts To Ensure Leak-Free Connections.
• Clean Connection Points: Remove Corrosion And Debris From Fittings To Ensure Proper Seating And Sealing.
• Pressure Test And Evacuate: Perform A Leak Test And Vacuum The System To Remove Moisture Before Recharging With The Correct Refrigerant And Oil Specified For The Vehicle.
• Torque And Routing: Follow Manufacturer Routing And Fastening Points To Avoid Chafing And Mechanical Stress On The Pipe.

Most Common Cause Of Failure

• Corrosion From Road Salt And Moisture Leading To Perforation Or Weakening Of The Tube.
• Mechanical Damage Or Chafing Caused By Improper Routing, Loose Clips, Or Contact With Other Components.
• Deterioration Of O-Rings And Seals Resulting In Slow Leaks Around Connectors.
• Overpressure Or System Contamination Causing Premature Joint Or Hose Failure.

Replacing The Air Conditioning Pipe As Part Of A Full A/C Service Minimizes Rework: change O-rings, perform a proper vacuum, and recharge the system with The Correct Refrigerant And Oil. Order This Replacement Pipe By Its Part Numbers (9650629880, 6460NC) To Ensure Fast Identification And Fitment For Citroën C4 And Peugeot 307 2.0i Applications.

Overview

This Air Conditioning Pipe Is A Direct-Fit Replacement For The Air Conditioning System On Citroën C4 And Peugeot 307 Vehicles Equipped With The 2.0i Engine. Supplied Under The Reference Numbers 9657451180 And 6460QK, The Part Is Intended For Use By Professional Technicians And Experienced DIY Enthusiasts Who Service Cabin Cooling Systems. It Transports Refrigerant Between System Components To Ensure Efficient Heat Exchange And Stable System Pressure.

Key Benefits

• Direct Replacement For Original Equipment Numbers, Making Identification Easy Via Part Codes.
• Restores Cooling Performance By Replacing Leaking Or Damaged Lines.
• Recommended For Garage Repairs And Confident DIY Replacements With Proper Tools.
• Helps Prevent Further Damage To Compressor And Other AC Components By Eliminating Leaks.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C4; Peugeot 307 (2.0i Engine)
• Product Codes: 9657451180; 6460QK
• Additional Numbers: NFP

Function And Application

The Pipe Carries Refrigerant Under High And Low Pressure Between Components Such As The Compressor, Condenser And Evaporator. It Is A Structural Part Of The Air Conditioning Circuit, Sealed At Joints With O-Rings Or Flared Fittings. A Serviceable, Leak-Free Line Is Essential For Maintaining System Pressure, Cooling Capacity And Lubrication Of The Compressor.

How The Replacement Is Performed

Replacement Should Follow Standard Air Conditioning Service Procedures. Typical Steps Include:

• Recover Refrigerant Using Approved Recovery Equipment (Performed By A Certified Technician Or In A Properly Equipped Workshop).
• Disconnect Electrical Connectors And Remove Components Obstructing Access To The Pipe.
• Unscrew Or Unclip The Old Pipe, Taking Care To Note The Position Of Clamps And Brackets.
• Replace Sealing O-Rings At All Connections With Correct Size O-Rings Lubricated With Correct Refrigerant Oil.
• Install The New Pipe, Secure Brackets And Torque Fittings To Manufacturer Specifications Where Available.
• Evacuate The System With A Vacuum Pump To Remove Moisture And Air, Then Recharge With The Correct Type And Amount Of Refrigerant And Oil.
• Perform A Leak Check And Verify Cooling Performance.

Note: The Procedure Requires Specialized Equipment For Refrigerant Recovery, Evacuation And Recharging. If You Lack The Equipment Or Experience, Have The Work Carried Out By A Qualified Workshop.

Common Failure Causes

• Corrosion From Road Salt And Moisture Leading To Pinholes And Leaks.
• Mechanical Damage From Impact Or Chafing Against Adjacent Components.
• Deterioration Of Sealing O-Rings And Fittings Causing Slow Leaks.
• Vibration Over Time Resulting In Cracks Or Fatigue At Bends And Connections.
• Excessive System Pressure Caused By Blockages Or A Faulty Condenser/Compressor, Which Can Stress The Pipe.

Signs Of A Failing Pipe Include Reduced Cooling Efficiency, Visible Oil Traces Around Joints, Hissing Sounds With The System Running, And Low Refrigerant Levels Detected During Service.

Practical Advice

Always Replace O-Rings When Installing A New Pipe And Use The Correct Refrigerant Oil To Ensure Proper Sealing. Inspect Mounting Brackets And Nearby Components For Damage Or Wear That Could Cause Future Chafing. After Installation, Perform A Thorough Leak Test And Monitor System Pressures To Confirm Correct Operation.

Compatibility And Identification

This Pipe Is Sourced For Vehicles Listed Above And Is Commonly Searched By Part Numbers 9657451180 And 6460QK. Confirm Fitment By Matching These Codes To Your Existing Part When Possible.

Ideal For Garages And Skilled DIYers Seeking A Reliable Replacement Part To Restore Air Conditioning Performance On Citroën C4 And Peugeot 307 2.0i Vehicles.

This air conditioning pipe is a direct-fit service part for Citroën C4 and Peugeot 307/308 models equipped with the 1.6 HDi 16V engine. Designed for professional workshops and experienced DIYers, the pipe restores refrigerant flow between components of the A/C circuit and helps maintain efficient cabin cooling. Ideal when the original line shows signs of leakage, corrosion or mechanical damage, this component is often searched by its product numbers for quick identification and ordering.

Benefits And Application

Replacement of a damaged A/C pipe returns the system to correct operating pressure, prevents refrigerant loss and avoids compressor overload. The part is suitable for routine repairs and collision damage where the A/C refrigerant lines are affected. Fits common Stellantis platforms used by Citroën and Peugeot, ensuring proper routing and connector compatibility.

How It Works And Why It Fails

The air conditioning pipe serves as a rigid or semi-rigid conduit for refrigerant between the compressor, condenser, evaporator and other components. It must withstand high pressure, thermal cycles and vibration. Common failure modes include:

• Corrosion from road salt and moisture leading to pinhole leaks.
• Mechanical damage from impacts or improper handling during repairs.
• Deteriorated O-rings or sealing faces causing refrigerant and oil leaks.
• Fatigue cracking at bends or joints after many heating/cooling cycles.

How To Replace

Only qualified personnel should perform A/C repairs. Typical replacement steps:

• Recover Refrigerant Using Approved A/C Service Equipment Before Disassembly.
• Disconnect Battery If Required By Vehicle Service Manual.
• Remove Any Obstructing Trim Or Components To Access The Pipe.
• Unscrew Or Unclip Pipe Fittings; Inspect And Replace All O‑Rings And Seals.
• Fit New Pipe In Correct Orientation, Tighten Fasteners To Manufacturer Torque.
• Evacuate The System With A Vacuum Pump, Check For Leaks, Then Recharge With Correct Refrigerant And Lubricant.
• Perform A Functional Test Of The A/C System And Check Pressures.

Installation Recommendations

• Always Recover And Recycle Refrigerant Using Certified A/C Equipment; Never Vent To Atmosphere.
• Replace All Associated O‑Rings And Apply Correct Type And Amount Of PAG Oil During Reassembly.
• Use A Vacuum Hold Test To Verify System Integrity Before Charging.
• Follow Vehicle Manufacturer Procedures For Routing And Clamping To Prevent Rubbing And Vibration Damage.
• Inspect Condenser, Receiver/Drier Or Accumulator And Compressor For Contamination When A Leak Occurs; Replace Contaminated Components As Needed.

Most Common Reasons For Failure

In normal service the pipe can fail due to corrosion from road salt, physical impact, degraded seals, or long-term metal fatigue. Leaks are most often discovered during service when pressure drops or when the system cannot hold vacuum after repair. Prompt replacement prevents moisture ingress and compressor damage.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C4; Peugeot 307; Peugeot 308 (1.6 HDi 16V)
• Product Codes: 9658201480, 647742
• Additional Numbers: 647742, 9658201480

Keywords: AC Pipe, Air Conditioning Line, AC Hose, Citroën C4 A/C Pipe, Peugeot 307 A/C Pipe, Peugeot 308 A/C Pipe, 1.6 HDi Air Conditioning.

Direct-fit air conditioning tube designed for Stellantis vehicles from the Citroën and Peugeot families. This climate pipe (common references 9684368380, 6477F4, 9831991080, 9819864880) routes refrigerant within the A/C circuit and is suitable for a range of models including Peugeot 308, 3008, 5008 and RCZ as well as Citroën C4 variants and C4 Picasso. Built to OEM mounting points and connection geometries, it helps restore proper refrigerant flow and prevents leaks that cause loss of cooling performance. Ideal for professional workshops and experienced DIYers performing A/C repairs or component replacements.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: PEUGEOT 308, 3008, 5008, RCZ; CITROËN C4, C4 II, C4 PICASSO
• Product Codes: 9684368380, 6477F4, 9831991080, 9819864880
• Additional Numbers: (T84), (T87), R134A

Function And Application

The tube is a fixed pipe/hose element of the vehicle air conditioning system that transports refrigerant between components such as the condenser, evaporator, compressor and receiver-drier/accumulator. It ensures leak-free routing under operating pressure and temperature while maintaining correct bend radii and mounting clearances specific to the vehicle models listed.

Replacement Procedure (Overview)

Replacement of the A/C tube should be performed by qualified personnel or skilled DIY mechanics with proper equipment. Typical steps:

• Recover Refrigerant: Safely evacuate and recover the R134a refrigerant using certified recovery equipment.
• Access And Remove: Remove any protective covers or brackets to access the tube. Undo fasteners and quick-connect fittings. Keep track of clamps and mounting hardware.
• Inspect And Replace Seals: Replace all O-rings and sealing elements on connections with correctly sized, lubricated O-rings (use compatible PAG oil) to ensure proper sealing.
• Install New Tube: Fit the new tube into position, secure brackets and connectors to OEM torque where specified, and ensure proper routing without kinks or contact with moving parts.
• Vacuum And Recharge: Evacuate the system to remove moisture and air, then recharge with the correct type and quantity of refrigerant (R134a) to manufacturer specifications.
• Leak Test And Function Check: Perform a pressure/leak test and verify cooling performance and system pressures during operation.

Installation Recommendations

• Always use certified refrigerant recovery and charging equipment; do not vent refrigerant to atmosphere.
• Replace O-rings at every sealing connection and lubricate them with the correct oil (PAG) to prevent leaks.
• Inspect adjacent components (compressor, condenser, receiver-drier, expansion valve) for damage or contamination; contaminated oil/detritus can damage the new tube.
• Perform a vacuum and leak test after fitting and before final charging. Verify system pressures and temperatures with diagnostic gauges.
• Follow vehicle manufacturer procedures and torque values for clamps and fittings where available.

Why This Part Most Often Fails

Common failure causes for A/C tubes include corrosion (especially in regions with road salt or high humidity), mechanical damage from road debris or incorrect routing, degradation of O-rings and seals leading to slow leaks, and stress from vibration or improper mounting. Contamination inside the A/C system (moisture, debris, or degraded oil) can accelerate wear and lead to blockages or localized corrosion. Failures typically occur after several years of service, but life expectancy depends on driving conditions and maintenance history.

Notes For Buyers

Use the product codes listed above (9684368380, 6477F4, 9831991080, 9819864880) when searching for exact matches. This item is intended for vehicles using R134a refrigerant. For best results, pair replacement of the tube with inspection or replacement of the receiver-drier/accumulator and replacement of O-rings.

This high quality air conditioning pipe fits a range of Peugeot and Citroën models and is a direct replacement for the original line that routes refrigerant between components in the A/C system. Ideal for professional workshops and experienced DIY mechanics, the pipe is often searched by product codes 9658227580, 9653227580 and 647736, so listing these numbers helps you find the exact part quickly.

Key Features

• Direct fit for specific Peugeot and Citroën models, designed to match original routing and connections.
• Compatible with R134a refrigerant systems commonly used in the affected model range.
• Durable construction to resist vibration and typical underbonnet conditions.
• Supplied without O rings or refrigerant; replace sealing elements during installation to ensure leak free operation.

Fitment

Fits the following models: Peugeot 308, Peugeot 3008, Peugeot 5008, Peugeot RCZ, Citroën C4 and Citroën C4 Picasso. Check the product codes 9658227580, 9653227580 and 647736 when searching for compatibility with individual vehicle variants.

Technical Information

• Manufacturer: Stellantis / Peugeot / Citroën
• Model: Peugeot 308, Peugeot 3008, Peugeot 5008, Peugeot RCZ, Citroën C4, Citroën C4 Picasso
• Product Codes: 9658227580, 9653227580, 647736
• Additional Numbers: 647736

Installation Recommendations

Replacement of an A/C pipe should be performed by a qualified technician or an experienced DIYer with appropriate tools. Recover refrigerant from the system using certified recovery equipment before removal. Replace O rings and seals with new, correctly sized parts and lubricate them with the correct type of PAG oil. After fitting, evacuate the system with a vacuum pump to check for leaks and remove moisture, then recharge with the correct amount and type of refrigerant. Perform a functional check of the entire air conditioning system and inspect fittings for leaks using electronic leak detector or UV dye if available. Always follow manufacturer safety procedures and disconnect the battery if required by the vehicle manufacturer before beginning work.

Common Failure Causes

Air conditioning pipes typically fail due to corrosion at joints, chafing against adjacent components, vibration fatigue, or damage from previous repairs. Leaks most often occur at flare fittings, crimped joints or where O rings have aged or been reused. Contamination or excessive pressure from an obstructed system can also accelerate wear.

Why Choose This Replacement

Choosing the correct A/C pipe with verified product codes reduces diagnostic time and prevents repeat repairs. This pipe offers an economical solution to restore system integrity and cabin cooling performance when original lines are leaking or mechanically damaged. Including the exact product codes in your search improves the chance of a direct fit and faster repair.

This Air Conditioning Tube Is A Direct Replacement Designed For Peugeot And Citroën Models. Supplied With OE Reference Numbers 9684310980 / 6477G6 (Also Found As 6477.G6), It Restores Proper Refrigerant Flow And Ensures Reliable Climate Control Performance. Ideal For Professional Workshops And Experienced DIY Mechanics Looking For An Exact-Fit Cooling System Component.

Technical Information

• Manufacturer: Stellantis
• Model: Peugeot 308; Peugeot 3008 (I); Peugeot 5008 (I); Peugeot RCZ; Citroën C4; Citroën C4 Picasso
• Product Codes: 9684310980, 6477G6
• Additional Numbers: 6477.G6

Function

The Tube Carries Refrigerant Between Air Conditioning System Components, Helping To Transfer Heat Away From The Passenger Compartment. It Maintains Correct Flow And Pressure Paths Within The Circuit, Contributing To Efficient Cooling And Stable System Performance.

Common Failure Causes

Air Conditioning Tubes Usually Last Many Years But Can Fail Due To Corrosion From Road Salt, Mechanical Damage From Debris Or Improper Mounting, Chafing Against Adjacent Components, Or Sealing Failure At Connectors (Degraded O-Rings). Leaks Are The Typical Symptom, Often Evidenced By Loss Of Cooling, Oil Residue Around Fittings, Or Audible Hissing With The System Pressurised.

Replacement Procedure

• Recover Refrigerant Using Certified Recovery Equipment (Required By Law In Many Regions).
• Depressurise And Remove Any Retaining Clips, Brackets, Or Fasteners Securing The Tube.
• Disconnect Fittings Carefully; Inspect And Replace O-Rings/Seals With Correct Size And Material.
• Install The New Tube In The Original Routing, Secure Clamps And Fasteners, And Ensure No Contact With Moving Parts.
• Perform A Vacuum Drying Procedure To Remove Moisture And Check For Leaks (Recommended Leak Test Methods: Electronic Leak Detector Or UV Dye).
• Recharge The System With The Correct Type And Amount Of Refrigerant And Oil Per Manufacturer Specifications.
• Run The System And Verify Operating Pressures, Temperature Drop, And Absence Of Leaks.

Installation Recommendations

• Always Replace O-Rings With New Ones Lubricated Using The Correct Refrigerant Oil (PAG Type Where Specified).
• Replace Receiver/Drier Or Accumulator If The System Has Been Opened To The Atmosphere To Avoid Moisture Contamination.
• Use Proper Tools And Certified Refrigerant Recovery/Charging Equipment—This Job Is Recommended For Professionals Or Experienced DIY Mechanics With Appropriate Gear.
• Secure All Lines To Factory Routing To Prevent Chafing; Inspect Nearby Components For Damage.
• After Installation, Perform A Leak Test And Verify System Cooling Performance Under Load.

Why This Part

This Tube Matches OE References And Is Manufactured To Fit Peugeot/Citroën Air Conditioning Systems Precisely. Using The Correct Tube Reduces Service Time, Minimises The Risk Of Recurring Leaks, And Restores Passenger Comfort Quickly—Important For Busy Workshops And DIY Enthusiasts Looking For Reliable, Searchable Parts (Search Terms: “9684310980”, “6477G6”, “Peugeot 308 AC Tube”, “Citroën C4 AC Pipe”).

If You Service Climate Systems Regularly, Keep Replacement O-Rings And Proper Refrigerant Oil On Hand To Speed Up Repairs And Ensure A Long-Lasting Seal.

This air conditioning pipe is designed for use on a range of Peugeot and Citroën models and provides a reliable connection within the vehicle’s AC refrigerant circuit. Ideal for professional workshops and experienced DIY mechanics, this replacement pipe matches original equipment fitment and key product references (9684311080 / 6477G7). Installing a correct, undamaged pipe restores proper refrigerant flow, prevents leaks and helps the climate system reach and maintain optimal cooling performance.

Technical Information

• Manufacturer: Stellantis / Peugeot Citroën
• Model: PEUGEOT 308, PEUGEOT 3008, PEUGEOT 5008, PEUGEOT RCZ, CITROËN C4, CITROËN C4 PICASSO
• Product Codes: 9684311080, 6477G7
• Other Numbers: 6477.G7, 6477.G7 (alternate notation)

Compatibility And Fitment Notes

Fits Common Stellantis Platforms Used On The Above Models. Compatibility Can Depend On Model Year And Specific Engine/Trim—Check The Part Shape And Connection Types Against The Removed Pipe. This Item Is Supplied As A Direct Replacement For The Referenced OE Numbers.

Installation Recommendations

• Recover Refrigerant Safely Using Approved Recovery Equipment Before Any Work On The AC Circuit.
• Inspect And Replace All Associated O-Rings And Seals When Installing The New Pipe; Lubricate New O-Rings With Appropriate Refrigerant Oil.
• Ensure All Connections And Clamps Are Clean, Correctly Seated And Tightened To Manufacturer Specifications.
• After Installation, Evacuate The System To Remove Moisture And Air, Then Recharge With The Correct Type And Amount Of Refrigerant Per Manufacturer Data.
• Check For Leaks Under Pressure And Perform A Functional Test Of The AC System Before Returning The Vehicle To Service.
• Recommended For Installation By Qualified Technicians Or Experienced Mechanics With Proper AC Service Equipment.

Most Common Failure Reasons

• Corrosion From Road Salt And Moisture Leading To Perforation Or Cracks.
• Mechanical Damage From Impact Or Improper Handling During Repairs.
• Gradual Wear Of Connection Ends And O-Rings Causing Refrigerant Leaks.
• Stress From Vibration Or Incorrect Mounting Causing Fatigue At Bends And Joints.

Practical Tips

When replacing the pipe, always visually inspect the condenser, compressor and evaporator for signs of oil stains or damage that might indicate other leaks. Use only manufacturer-approved refrigerant and oils, and record the service data (refrigerant mass, oil added) for future maintenance. A properly fitted pipe will eliminate leaks, reduce system contamination and restore reliable cabin cooling.

Keywords For Search

Air Conditioning Pipe, AC Pipe Peugeot, AC Pipe Citroën, 9684311080, 6477G7, AC Line, Climate Pipe, Peugeot 308 AC, Peugeot 3008 AC, Citroën C4 AC

This air conditioning pipe is designed specifically for Citroen C4 and Peugeot 307, 308 models equipped with the 2.0 HDI RHR engine. It plays a critical role in the vehicle’s climate control system by efficiently transporting refrigerant, which directly affects the cooling performance of the air conditioning system.

Ideal for professional mechanics and DIY car repair enthusiasts alike, this replacement pipe helps maintain and restore optimal AC functionality, especially important during hot weather conditions. The part is commonly searched using the product codes 9658201080 and 647739.

Technical Information

• Manufacturer: PSA
• Models: Citroen C4, Peugeot 307, Peugeot 308
• Product Codes: 9658201080, 647739
• Additional Numbers: RHR 2.0 HDI

The air conditioning pipe is prone to wear over time due to exposure to corrosion or potential cracking, which can result in refrigerant leaks and reduced AC system effectiveness. Replacing an old or damaged pipe with this part from our offer will help keep your vehicle’s air conditioning in excellent working condition.

If you have any questions or need advice on compatibility with your specific vehicle model, please do not hesitate to contact our customer service team. We are here to assist you in ensuring your vehicle remains in top condition all year round.

This air conditioning pipe is designed specifically for the Peugeot 307 2.0 HDI model, ensuring precise fitment and optimal airflow within the vehicle’s climate control system. The pipe plays a crucial role in transporting refrigerant between components, contributing to effective cooling performance and passenger comfort.

Over time, AC pipes can deteriorate due to exposure to heat, pressure, and vibration, which may cause leaks or reduced efficiency in the AC system. Replacing worn or damaged pipes helps maintain the integrity of your vehicle’s air conditioning, preventing costly repairs and improving system reliability.

Installation is straightforward for experienced mechanics and skilled DIYers. The pipe is mounted within the engine bay, connecting to other AC system components such as the condenser and evaporator. Proper sealing and secure fittings are essential to ensure leak-free operation.

Technical Information

• Manufacturer: PSA
• Model: Peugeot 307 2.0 HDI
• Product Codes: 9647878880, 6460CE
• Additional Numbers: NFP