This genuine-style air conditioning pipe is designed as a direct-fit replacement for a range of Peugeot and Citroën models. Ideal for professional workshops and experienced DIY technicians, the pipe restores proper refrigerant routing and system integrity after damage or degradation. Frequently searched by OE numbers, this part provides a reliable repair option when the original line is cracked, corroded or leaking at connections. Using the correct replacement pipe helps maintain system pressure, reduces risk of compressor damage and ensures efficient cabin cooling.

Technical Information

• Manufacturer: Stellantis (Peugeot / Citroën)
• Model: Peugeot 308, 3008, 5008, RCZ; Citroën C4, C4 II, C4 Picasso
• Product Codes: 9684755680, 6477H8
• Other Numbers: Commonly referenced under OE numbers 9684755680 / 6477H8

Installation Recommendations

Replacement of an air conditioning pipe should be performed by a qualified technician or an experienced DIYer with the correct tools. Recommended steps:

1. Recover Refrigerant: Evacuate and recover refrigerant using approved recovery equipment in accordance with local regulations.
2. Depressurize System: Ensure the system is fully depressurized before opening any fittings.
3. Access And Remove: Gain access to the faulty pipe (may require removal of engine covers, intake components or battery depending on model). Loosen and remove fittings at both ends, retaining any reusable brackets if undamaged.
4. Replace Seals: Always replace O-rings/seals at each connection with new, correct-size refrigerant-rated O-rings lubricated with the correct PAG oil type.
5. Install Pipe: Fit new pipe and torque fittings to manufacturer specification to avoid leaks or deformation.
6. Vacuum And Recharge: Evacuate system to required vacuum level, perform leak check, then recharge with the correct refrigerant type and oil quantity per vehicle specification.
7. Functional Test: Run the A/C system, check pressures and verify cooling performance and leak-free operation.

Always follow manufacturer safety procedures. Wear protective gloves and eye protection when working with refrigerant and pressurized systems.

Why This Part Most Often Fails

Air conditioning pipes commonly fail due to a combination of factors: corrosion from road salts or moisture on metal sections, mechanical damage from impacts or debris, and seal/O-ring deterioration at connection points. Vibration and thermal cycling over years can lead to fatigue at bends or joints. In vehicles exposed to harsh climates or where the pipe routing is close to moving components, the risk of chafing or puncture increases. When a leak develops, the system loses refrigerant and oil, which can quickly lead to compressor overheating and reduced cooling performance.

Practical Notes

OE Part Numbers Are Often Used By Technicians When Searching For This Component. When replacing, ensure you fit new O-rings and follow correct evacuation/recharge procedures to protect the rest of the A/C system. This pipe is commonly fitted across several Peugeot and Citroën models listed above and is a standard repair item in cooling, heating and air conditioning maintenance.

Direct-fit air conditioning tube designed for Stellantis vehicles from the Citroën and Peugeot families. This climate pipe (common references 9684368380, 6477F4, 9831991080, 9819864880) routes refrigerant within the A/C circuit and is suitable for a range of models including Peugeot 308, 3008, 5008 and RCZ as well as Citroën C4 variants and C4 Picasso. Built to OEM mounting points and connection geometries, it helps restore proper refrigerant flow and prevents leaks that cause loss of cooling performance. Ideal for professional workshops and experienced DIYers performing A/C repairs or component replacements.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: PEUGEOT 308, 3008, 5008, RCZ; CITROËN C4, C4 II, C4 PICASSO
• Product Codes: 9684368380, 6477F4, 9831991080, 9819864880
• Additional Numbers: (T84), (T87), R134A

Function And Application

The tube is a fixed pipe/hose element of the vehicle air conditioning system that transports refrigerant between components such as the condenser, evaporator, compressor and receiver-drier/accumulator. It ensures leak-free routing under operating pressure and temperature while maintaining correct bend radii and mounting clearances specific to the vehicle models listed.

Replacement Procedure (Overview)

Replacement of the A/C tube should be performed by qualified personnel or skilled DIY mechanics with proper equipment. Typical steps:

• Recover Refrigerant: Safely evacuate and recover the R134a refrigerant using certified recovery equipment.
• Access And Remove: Remove any protective covers or brackets to access the tube. Undo fasteners and quick-connect fittings. Keep track of clamps and mounting hardware.
• Inspect And Replace Seals: Replace all O-rings and sealing elements on connections with correctly sized, lubricated O-rings (use compatible PAG oil) to ensure proper sealing.
• Install New Tube: Fit the new tube into position, secure brackets and connectors to OEM torque where specified, and ensure proper routing without kinks or contact with moving parts.
• Vacuum And Recharge: Evacuate the system to remove moisture and air, then recharge with the correct type and quantity of refrigerant (R134a) to manufacturer specifications.
• Leak Test And Function Check: Perform a pressure/leak test and verify cooling performance and system pressures during operation.

Installation Recommendations

• Always use certified refrigerant recovery and charging equipment; do not vent refrigerant to atmosphere.
• Replace O-rings at every sealing connection and lubricate them with the correct oil (PAG) to prevent leaks.
• Inspect adjacent components (compressor, condenser, receiver-drier, expansion valve) for damage or contamination; contaminated oil/detritus can damage the new tube.
• Perform a vacuum and leak test after fitting and before final charging. Verify system pressures and temperatures with diagnostic gauges.
• Follow vehicle manufacturer procedures and torque values for clamps and fittings where available.

Why This Part Most Often Fails

Common failure causes for A/C tubes include corrosion (especially in regions with road salt or high humidity), mechanical damage from road debris or incorrect routing, degradation of O-rings and seals leading to slow leaks, and stress from vibration or improper mounting. Contamination inside the A/C system (moisture, debris, or degraded oil) can accelerate wear and lead to blockages or localized corrosion. Failures typically occur after several years of service, but life expectancy depends on driving conditions and maintenance history.

Notes For Buyers

Use the product codes listed above (9684368380, 6477F4, 9831991080, 9819864880) when searching for exact matches. This item is intended for vehicles using R134a refrigerant. For best results, pair replacement of the tube with inspection or replacement of the receiver-drier/accumulator and replacement of O-rings.

This air conditioning pipe (OE numbers 9684310980 / 6477G6) is a direct-fit replacement designed for Peugeot and Citroën models. Ideal for professional workshops and experienced DIYers, the part restores correct refrigerant flow between HVAC components and helps return the system to full cooling performance. The product description and reference numbers are commonly used when searching or ordering replacement parts, so include the codes 9684310980 and 6477G6 when looking up fitment.

Features And Benefits

– Direct replacement for factory-installed air conditioning lines where listed part numbers apply.
– Durable metal construction with factory-standard sealing surfaces and fittings to ensure reliable connection and service life.
– Supplied to match original attachment points for straightforward installation and correct routing.
– Part numbers frequently used by garages and parts suppliers: 9684310980, 6477G6 (also referenced as 6477.G6).

Technical Information

• Manufacturer: Stellantis (Peugeot / Citroën)
• Model: Peugeot 308, Peugeot 3008, Peugeot 5008, Peugeot RCZ; Citroën C4, Citroën C4 Picasso
• Product Codes: 9684310980, 6477G6
• Additional Numbers: 6477.G6; 6477G6; 9684310980

Installation Recommendations

Replacement of an air conditioning pipe should follow safety and environmental rules. Recommended procedure:

• Recover refrigerant using an approved A/C service station before any disassembly.
• Remove retaining clips, brackets and fittings to access the defective pipe. Keep track of bolt and clip locations for reassembly.
• Always replace sealing O-rings at every connection. Lubricate new O-rings with the correct refrigerant oil specified for the vehicle.
• Fit the new pipe ensuring correct orientation and secure all clamps and brackets to manufacturer torque values.
• Evacuate and vacuum the system, then recharge with the refrigerant type and charge quantity specified by the vehicle manufacturer.
• Perform a leak test (electronic detector or UV dye) and verify system pressures and cooling performance before returning the vehicle to service.

If you are not equipped with the proper A/C recovery and charging tools, have the installation completed by a qualified workshop to comply with environmental and safety requirements.

Why This Part Fails Most Often

• Corrosion and galvanic attack from road salt and moisture causing deterioration of the metal or fittings.
• Mechanical damage from road debris or impact when undercarriage protection is compromised.
• O-ring deterioration leading to slow leaks at connections due to age, heat cycling or incorrect lubrication during previous service.
• Fatigue or vibration-induced loosening of clamps and brackets resulting in chafing and eventual leakage.

Service Advice

During A/C system repairs, inspect adjoining components (compressor, condenser, evaporator, hoses and dryer/accumulator). Replace O-rings, filter-drier/desiccant and add correct type and amount of refrigerant oil as per vehicle specification. Regular visual inspections during routine servicing help catch leaks early and prevent compressor damage caused by refrigerant or oil loss.

Original air conditioning pipe (coolant line) for Peugeot and Citroën cars. This is a used OEM air conditioning duct for selected 308, 3008, 5008, RCZ, C4 and C4 Picasso models. Thanks to the precise geometry and factory quality of the material, it reliably seals and ensures the correct circulation of the coolant in the AC system. An ideal solution if you need to replace damaged or corroded wiring and maintain the original quality.

Compatibility (according to specific equipment and engine): Peugeot 308, 3008, 5008, RCZ; Citroën C4 and C4 Picasso. We recommend checking against the part number 6477G7 / 9684311080 or the VIN to ensure that the shape and connection terminals match.

Why this part often leaves: A/C pipes are exposed to moisture, road salt and vibration. Weakening of the wall at the points of attachment and subsequent leakage of coolant is typical. The manifestation is usually a loss of cooling, greasy maps near the connection, or a hissing sound. Timely replacement will prevent damage to the compressor due to running without refrigerant/oil.

Installation tips: before installation, always replace the O-rings with new ones, clean the mating surfaces and lightly coat them with suitable oil for AC. After installation, let the system be evacuated and perform a leak test, then fill with coolant and oil according to the vehicle manufacturer’s specifications. If the system has been open for a long time, consider replacing the filter-drier. Make sure that the tube is properly placed in the holders to avoid unwanted vibrations.

The advantages of the original part: precise fit without modifications, correct routing for flow and cooling, high-quality alloy and reliable terminals. In practice, this means faster assembly, better tightness and a longer service life compared to non-original alternatives.

Technical information

• Manufacturer: PSA Peugeot Citroën (OEM)
• Model: Peugeot 308 / 3008 / 5008 / RCZ; Citroën C4 / C4 Picasso (depending on the specific version)
• Product codes: 6477G7; 9684311080
• Other numbers: 6477.G7; 96 843 110 80

Looking for “climate pipe”, “air conditioning pipe”, “coolant line” for Peugeot/Citroën? This original part with codes 6477G7 and 9684311080 is a proven choice for quick and clean air conditioning repair without compromise.

This replacement air conditioning pipe (Part No. 9800404180) is designed for direct fitment to a range of Stellantis vehicles including Citroën and Peugeot models. Built to restore proper refrigerant flow and system pressure, the pipe is a practical choice for professional workshops and experienced DIY mechanics looking for a reliable, OEM-compatible line. Ideal when diagnosing persistent low cooling performance or locating the source of refrigerant leaks, this component helps return the system to factory performance when installed correctly.

Compatibility / Applications

Fits the following models (check vehicle build and component location before ordering):

• Citroën C4 II (B7)
• Citroën C5 II
• Peugeot 308 (including T9)
• Peugeot 508
• Peugeot 5008 I
• DS4

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Air Conditioning Pipe
• Product Codes: 9800404180
• Other Numbers: 9800404180 (common reference)

Function And Description

The air conditioning pipe carries refrigerant between key components of the A/C system (compressor, condenser, dryer/receiver and evaporator). It is engineered to withstand system pressure and temperature cycles while maintaining a sealed path to prevent refrigerant loss. The part typically consists of metal tubing and crimped hose connections with service fittings and sealing O-rings at connection points.

Installation Recommendations

• Recover Refrigerant First: Always recover the system refrigerant using certified recovery equipment before beginning work.
• Replace Seals: Fit new O-rings/seals lubricated with the correct PAG oil or lubricant specified for the vehicle refrigerant.
• Leak Test And Evacuate: After installation, perform a vacuum evacuation and leak test, then recharge with the correct type and amount of refrigerant for the vehicle.
• Safety Precautions: Wear protective eyewear and gloves. Work in a well-ventilated area and follow environmental and legal rules for refrigerant handling.
• Recommended For Professionals: While experienced DIYers can replace pipes, recovery/recharge and system diagnostics are best performed with proper service equipment.

Most Common Failure Reasons

Air conditioning pipes most often fail due to corrosion from road salt and moisture, physical damage from road debris or impact, and degradation of connection O-rings leading to refrigerant leaks. Vibrations and thermal cycling can also cause fatigue at joints and crimped connections. Loss of refrigerant or oil contamination accelerates wear and reduces cooling efficiency.

When replacing, ensure the cause of the leak or damage is addressed (for example, inspect surrounding brackets, mounting points and nearby components) to prevent repeat failures.

Buy this AC pipe (9800404180) to restore proper air conditioning performance in compatible Citroën and Peugeot vehicles. If you are a professional technician, this part is a straightforward replacement during an A/C service; for DIY repairs, follow the installation recommendations and use appropriate service tools for refrigerant handling.

Product Overview

This A/C Pipe (Air Conditioning Line) is a direct-fit used part for a range of Stellantis vehicles from the Peugeot and Citroën families. Ideal for professional workshops and DIY mechanics searching by part number (e.g. 9684368380, 6477F4), the pipe restores refrigerant circuit integrity when original lines are leaking or mechanically deformed. The item is slightly deformed cosmetically but maintains full sealing performance and functionality.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Peugeot 308; Peugeot 3008 (I); Peugeot 5008 (I); Peugeot RCZ; Citroën C4; Citroën C4 Picasso (C4 II)
• Product Codes: 9684368380, 9831991080, 9819864880, 6477F4
• Additional Numbers: 6477F4, 9684368380

Fitment And Notes

The pipe fits a number of petrol and diesel variants within the listed models—fitment may vary by engine version and production year. Always compare the shape, connections and mounting points of the replacement part with the original component before installation. This part is commonly sought by part number, so including the codes above in searches will improve findability.

Replacement Procedure

Recommended replacement steps for qualified technicians or experienced DIYers:

• Recover Refrigerant: Use approved recovery equipment to evacuate the refrigerant safely in accordance with local regulations.
• Prepare Work Area: Work on a cooled system; wear eye protection and gloves.
• Remove Old Pipe: Loosen fittings and clamps securing the line. Note position of brackets and clips for correct reinstallation.
• Replace Seals: Always fit new O-Rings or seals at each connection point; lubricate seals with the correct A/C oil for the vehicle’s refrigerant type.
• Install New Pipe: Fit the pipe, secure clamps and brackets, and torque fasteners to manufacturer recommendations where available.
• Evacuate And Recharge: Evacuate the system with a vacuum pump to remove moisture and air, then recharge with the manufacturer-specified refrigerant and oil charge.
• Leak And Function Test: Perform a pressure/leak test and verify cooling performance and system pressures during operation.

Typical job time ranges from approximately 1 to 2 hours depending on accessibility and required system work.

Why The Part Most Often Fails

A/C pipes commonly fail due to mechanical damage (impact or deformation), corrosion at metal joints, vibration fatigue, and degraded O-Rings or seals. Thermal cycling and road debris or minor collisions can bend or dent the pipe, compromising connection points. In many cases, the pipe body remains serviceable despite small deformations if sealing surfaces and fittings are intact—this is the condition of the offered part.

Installation Recommendations

• Always Replace O-Rings: Use new, correctly sized O-Rings and apply the specified refrigerant oil to ensure proper sealing.
• Professional Refrigerant Handling: Recovery and recharge must be performed with certified A/C service equipment by trained personnel or an authorized workshop.
• Inspect Adjacent Components: Check condensers, evaporators, hoses and clamps for wear or damage while the system is open to avoid repeat leaks.
• Perform Leak Detection: Use electronic leak detection or UV dye to confirm a dry, leak-free system after repair.

Condition Reminder: The Pipe Is Slightly Deformed Visually But Has Been Confirmed To Seal And Function Properly In The Refrigerant Circuit.

Discover quality used parts for your Citroën or Peugeot with our selection of verified components. Today’s product, the air conditioning pipe, specifically intended for Citroën C4 II, C5 II, and Peugeot 308, 508, 5008 models, is the perfect solution if you’re seeking a reliable replacement for the original part. The component is suitable for cooling and heating systems, ensuring your air conditioning operates efficiently and without issues.

This part is particularly crucial for the proper functioning of the air conditioning in your vehicle as it guarantees efficient refrigerant transfer. Common issues with these pipes may include leaks caused by material wear or damage from stones and other foreign objects on the road, which can lead to air conditioning failure. Therefore, replacing a damaged pipe is essential for maintaining optimal temperatures in your vehicle.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C4 II B7, Citroën C5 II, Peugeot 308, Peugeot 508, Peugeot 5008
• Product Codes: 9677949880

With our part, you gain not only a core solution for your vehicle but also assurance that installation will go smoothly due to perfect compatibility with the aforementioned models. This product is highly recommended for automotive mechanics and DIY enthusiasts who seek reliability and quality in one package.

Whether you are performing routine maintenance or addressing a sudden air conditioning failure, this part will ensure your vehicle is back in top condition. Take advantage of our competitive prices and quality assurance on used parts to keep your vehicle running smoothly, regardless of the season or weather.