Description

High-quality air conditioning pipes designed for Citroën C-Elysée and Peugeot 301 with the 1.2i engine. This part restores reliable refrigerant flow between system components and ensures correct operation of the vehicle’s HVAC system. Ideal for professional workshops and experienced DIY mechanics who maintain or repair AC systems on Stellantis small sedans.

Features And Function

• Direct-fit pipe engineered to match original routing and connection points.
• Transports refrigerant between condenser, evaporator, compressor or inline components depending on vehicle configuration.
• Made to resist vibration and engine-bay temperatures while maintaining leak-tight joints when fitted with correct seals.
• OE Reference Number: 9676996380 for easy lookup and ordering.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C-Elysée, Peugeot 301 1.2i
• Product Codes: 9676996380
• Other Numbers: Not Available

How The Part Is Replaced

Replacement of AC pipes is a repair that affects the sealed refrigerant circuit. Typical replacement steps:

• Recover Refrigerant Using Certified Equipment: Always evacuate and capture refrigerant with an approved recovery machine before opening the system.
• Remove Affected Pipes And Inspect: Disconnect fittings at service ports, compressor, condenser or evaporator as required. Replace any damaged O-rings and inspect mating surfaces for corrosion.
• Fit New Pipe With Correct Seals: Install new O-rings lubed with the specified PAG oil and torque fittings to manufacturer values to avoid leaks.
• Evacuate, Leak Test And Recharge: Vacuum the system, perform a leak test, then recharge with the refrigerant and oil quantities specified by the vehicle manufacturer.
• Functional Check: Run the AC system to verify pressures and cooling performance; check for leaks after a short road test.

Installation Recommendations

• Only qualified technicians or experienced DIY mechanics with proper AC tools should work on the refrigeration circuit.
• Always recover refrigerant before opening the system to comply with legal and safety requirements.
• Replace O-rings and, if the system has been breached, consider replacing the receiver/drier or accumulator to protect the new pipe from contamination and moisture.
• Use the manufacturer-specified refrigerant and lubricating oil; incorrect fluids reduce service life and can damage the compressor.
• Avoid kinking or over-bending the pipe during installation and ensure correct routing to prevent chafing on chassis or engine components.

Why The Part Most Often Fails

• Corrosion From Road Salt And Moisture: Metal lines can corrode at joins or where protective coating is damaged, causing slow leaks.
• Mechanical Damage: Impact from road debris or damage during previous repairs can dent or crack pipes.
• Ageing Of Seals: O-rings and connection seals harden over time and lose elasticity, leading to refrigerant loss at joints.
• Vibration And Fatigue: Long-term vibration can cause stress at bends and fittings, eventually resulting in leaks.
• Contamination From A Failed Compressor: Metal debris from a failed compressor can clog or abrade lines, necessitating replacement.

Compatibility And Notes

Fits Citroën C-Elysée and Peugeot 301 models equipped with the 1.2i petrol engine that use the referenced OE code. The product code 9676996380 is commonly used when searching for the correct replacement part. Verify visual match of connections and routing before installation.

The air conditioning pipe is essential for the proper function of the entire AC system. Damage or wear can cause a significant drop in performance or even complete system failure. Therefore, it is crucial to keep all components in excellent condition and fully operational. Our offering of used auto parts allows you to maintain your vehicle efficiently without the need for expensive new components.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Models: Citroën C-Elysée, Peugeot 301
• Product Codes: 9674395080

Thanks to precise manufacturing and perfect compatibility, our product guarantees a smooth and quick installation. This is especially important for professional mechanics or DIY enthusiasts who want to perform repairs efficiently and without unnecessary complications. Customers choosing this part will appreciate its reliability and long service life, which are essential factors when selecting used components.

If you are a car repair professional or an experienced DIY mechanic seeking a replacement part for Citroën C-Elysée or Peugeot 301 models, this air conditioning pipe is exactly what you need. Ensure that your AC system functions effectively and without interruption with this quality used component. Have this part delivered directly to your workshop or home to simplify the repair and maintenance of your vehicle. The air conditioning pipe is ready for immediate installation to get your car back on the road in optimal condition.

Installing this part can significantly enhance the performance of your vehicle’s air conditioning system, especially during the hot summer months. Quality and durability are key, even for a used component; our part has undergone careful selection and inspection to ensure that it meets high standards for reuse.

Technical Information:
Manufacturer: PSA CITROEN PEUGEOT
Model: CITROEN C-ELYSEE, PEUGEOT 301
Product Codes: 9674395480
Other Numbers: Not provided

Proper maintenance and occasional replacement of the air conditioning pipe can prevent many issues related to the air conditioning system, such as refrigerant leaks or reduced cooling efficiency. This pipe plays a crucial role in the vehicle’s cooling cycle, as it transfers refrigerant that absorbs heat from the vehicle’s interior and releases it to the outside environment. Investing in a quality and compatible part like ours will ensure that your system functions as it should.

This product is a great choice for mechanics and DIY enthusiasts who want to maintain or improve the functionality of their vehicle’s air conditioning system without having to invest in expensive new parts. Seize this opportunity to secure a quality and verified replacement part that will help keep your car cool throughout all summer days.

Description

This air conditioning pipe is designed for Citroën C-Elysée and Peugeot 301 models equipped with the 1.6 16V engine. It serves as a direct-fit refrigerant line for the vehicle’s A/C system and is indexed under common OEM references to simplify identification and replacement. Ideal for professional workshops and experienced DIY mechanics who search by part number.

Key Benefits

• Direct fit for factory routing and connections, minimizing installation time.
• OEM cross-reference numbers included for quick lookup in parts catalogs.
• Restores proper refrigerant flow and helps eliminate leaks that reduce cooling performance.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C-Elysée, Peugeot 301 (Engine: 1.6 16V)
• Product Codes: 9674395180
• Other Numbers: 9811551180, 9819409480

Compatibility And Search Tips

Commonly searched under part numbers 9674395180, 9811551180, and 9819409480. Use these OEM codes to find exact matches in parts listings. Compatible with Citroën C-Elysée and Peugeot 301 1.6 16V variants where this refrigerant line is fitted.

Installation Recommendations

For safe and reliable replacement follow these steps and precautions:

• Recover the refrigerant from the system using certified A/C recovery equipment before disassembly.
• Release system pressure and disconnect any electrical connectors or sensors nearby, labeling hoses and fittings if needed.
• Remove clamps, brackets and fittings securing the old pipe. Replace O-rings and seals at each connection with new, correctly sized, lubricated O-rings compatible with the system refrigerant and oil.
• Install the new pipe in factory routing, secure all fasteners and brackets to prevent chafing or contact with moving parts.
• Evacuate the system with a vacuum pump and recharge with the refrigerant type and charge quantity specified by the vehicle manufacturer.
• Perform a leak check and verify system pressure and cooling performance after service.

Recommended for installation by professional technicians or experienced DIYers with access to appropriate A/C service equipment. Always follow local regulations for refrigerant handling and dispose of recovered refrigerant correctly.

Why This Part Fails Most Often

• Corrosion and material fatigue from road salt and moisture, especially at metal joints and fittings.
• Mechanical damage from impacts or contact with debris under the vehicle.
• Leaking O-rings or improperly seated connections after previous repairs.
• Vibration-induced wear where the pipe is inadequately supported or mounting brackets are damaged.
• Contamination or internal blockages that increase system pressure and stress seals and joints.

Service Life And Replacement Advice

There is no fixed replacement interval for A/C pipes; they are typically replaced when a leak, visible damage, or loss of cooling performance is detected. Inspect lines during routine A/C service and after collision or underbody impacts. When replacing this pipe, always inspect adjacent components (compressor, condenser, evaporator, hoses, O-rings) and replace any damaged items to ensure a durable repair.

Search And Identification

Use the OEM numbers 9674395180, 9811551180 and 9819409480 when searching online or in parts catalogs. Entering the vehicle models “Citroën C-Elysée” or “Peugeot 301 1.6 16V” together with these part numbers will improve search accuracy and help find the exact replacement faster.

This low-pressure A/C line is a direct-fit replacement designed for Citroën C-Elysée and Peugeot 301 1.2i models. Supplied as the low-pressure pipe only, it restores the refrigerant circuit connection between the evaporator/outlet components and the service valves or receiver-drier depending on vehicle layout. The part is commonly referenced by OEM number 9676996380 and is often searched by this code when sourcing replacement air conditioning components.

Fitment And Application

Compatible With: Citroën C-Elysée (1.2i), Peugeot 301 (1.2i). Intended To Replace The Low-Pressure A/C Line On Vehicles That Use The Corresponding OEM Routing And Fittings. Verify Physical Fitment Against The Existing Hose For Clip Positions And Connector Type.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C-Elysée, Peugeot 301 (1.2i)
• Product Codes: 9676996380
• Other Numbers: No Additional Numbers Known

Function And Symptoms

The Low-Pressure A/C Pipe Carries Refrigerant In Gas Or Low-Pressure Liquid Form Between Components Of The Air Conditioning System. A Faulty Or Leaking Pipe Will Cause Loss Of Refrigerant, Reduced Cooling Performance, Visible Oil Traces At Fittings, Or Complete System Failure. Typical Symptoms Include Weak Cooling, Hissing Leaks With The System Running, Or Detector/Pressure Irregularities During Diagnostics.

Why The Part Fails

• Corrosion At Metal Fittings Due To Road Salt Or Moisture Exposure.
• Mechanical Damage From Debris, Impact, Or Chafing Against Bodywork.
• O-Ring Deterioration At Connections Causing Gradual Leaks.
• Age-Related Material Fatigue And UV/Heat Degradation.

Installation Recommendations

Recommended For Professional Fitment Or Experienced DIYers With A/C Service Equipment. Basic Steps:

• Recover Refrigerant Using A Certified Recovery Station Before Any Work.
• Depressurize And Remove The Old Pipe; Inspect Mating Surfaces And Replace O-Rings At Every Connection.
• Lubricate New O-Rings With The Correct A/C Compressor Oil Specified For The Vehicle.
• Refit Clips And Fasteners To Original Positions; Avoid Twisting Or Excessive Bending Of The New Hose.
• Evacuate The System To Achieve Required Vacuum, Then Recharge With The Correct Type And Amount Of Refrigerant.
• Perform A Leak Test And Functional Check Of The A/C System After Recharging.

Additional Tips For Mechanics

• Always Replace Aged Or Damaged O-Rings When Installing A New Line To Ensure A Reliable Seal.
• Check Adjacent Components (Receiver-Drier, Expansion Valve, Compressor) For Contamination Or Oil Loss When A Leak Is Found.
• Record Part Number 9676996380 In Job Notes To Help Future Maintenance And Ordering.

Warranty And Quality Notes

This Listing Describes The Low-Pressure Pipe Only. Ensure Correct Part Selection By Comparing The Physical Shape, Connector Type, And Mounting Points With The Original Item. Replacing A Damaged A/C Line Is A Key Step To Restoring System Performance And Preventing Compressor Damage From Low Refrigerant Levels.