Direct-fit air conditioning pipe designed for Peugeot 207 and Citroën C3 Picasso models. This replacement AC pipe matches OE fitment and part number cross-references to ensure reliable refrigerant flow and leak-free connections. Ideal for professional workshops and DIY mechanics searching by part number (9671596080, 9800886980, 6477J1, 9655448980, 647705). Installing a correct-fit pipe restores system pressure integrity, reduces the risk of compressor damage, and helps maintain cabin cooling performance.

Technical Information

• Manufacturer: Stellantis
• Model: Peugeot 207; Citroën C3 Picasso
• Product Codes: 9671596080; 9800886980; 6477J1
• Other Numbers: 9655448980; 647705

Function And Application

The AC pipe routes refrigerant between components of the air conditioning system (for example between the condenser, evaporator, dryer/receiver or compressor). It is a pressure-containing line that must maintain a tight seal under varying temperatures and vibrations to keep the system charged and efficient.

Why This Part Fails

Common causes of failure include corrosion from road salt and moisture, mechanical damage from road debris or chafing, and degradation of seals and O-rings over time. Failures typically appear as refrigerant leaks at joints or along the line, which lead to reduced cooling performance and can cause the compressor to run dry and fail if not addressed.

Installation Recommendations

For safe and correct replacement follow these guidelines:

• Recover refrigerant using appropriate certified AC service equipment before removal — do not vent refrigerant to atmosphere.
• Inspect mating surfaces and replace all O-rings and seals with new, correctly sized components lubricated with manufacturer-recommended oil.
• Ensure fittings and clamps are torque-tight according to manufacturer specifications and that hoses are routed without kinks or contact points that could cause chafing.
• After installation, evacuate the system and perform a vacuum test to verify leak-free integrity, then recharge with the correct refrigerant type and specified lubricant quantity per manufacturer documentation.
• Perform a system performance check (pressure and temperature) and verify compressor operation and cabin cooling efficiency.

Notes For Mechanics And DIY Enthusiasts

This part is commonly searched by part number, so include the referenced numbers when ordering to ensure correct selection. While replacement is straightforward for experienced technicians, refrigerant handling and system evacuation/recharge require certified recovery equipment and competence. If you are not equipped to recover and recharge refrigerant, have the system serviced at a workshop with appropriate AC service tools.

This air conditioning pipe is designed for use in Peugeot 207 and Citroën C3 Picasso vehicles. It is a direct-fit refrigerant line commonly used in the vehicle climate system to transfer refrigerant between A/C components. Suitable for professional workshops and competent DIY mechanics who service air conditioning systems, the part is often searched for by OEM numbers — making it easy to find when ordering or replacing the worn component.

Overview

The A/C pipe (climate pipe) routes refrigerant under pressure between key components of the air conditioning circuit. Depending on the vehicle configuration, it may connect the compressor, condenser, dryer/receiver or evaporator. Construction typically combines rigid metal tubing with molded rubber connections and sealing O-rings to guarantee tight joints and flexibility where needed.

How It Works And When To Replace

The pipe carries high- and low-pressure refrigerant within the A/C system. It should be replaced if there are visible leaks, corrosion, dents, crushed sections or damaged connection ends. Loss of cooling performance, hissing sounds or oil traces at joints are common indicators of a failing refrigerant line. Replacement intervals vary with use and environment; pipes in coastal or salted-road areas may fail earlier due to corrosion, while mechanically damaged pipes fail immediately after impact.

Installation Recommendations

• Recover Refrigerant Safely: Before removal, recover refrigerant with approved A/C service equipment. Handling refrigerant without proper machinery is illegal and dangerous.
• Inspect And Replace Seals: Always replace O-rings and seals at each connection. Lubricate new O-rings with the correct compressor oil (PAG or manufacturer specified) to ensure sealing and prevent leaks.
• Clean Connections: Remove debris and check mating surfaces for damage. Bent or crushed pipe sections must be replaced to avoid future leaks.
• Pressure Test And Evacuate: After fitting the new pipe, perform a vacuum and leak test using professional equipment, then recharge the system with the correct refrigerant type and charge quantity per manufacturer specifications.
• Safety And Tools: Use personal protective equipment and follow workshop safety rules. Tighten fittings to specified torque values and avoid twisting rubber sections during assembly.

Why This Part Commonly Fails

Typical causes of failure include corrosion (especially from road salt or moisture), mechanical damage from road debris, vibration fatigue at clamp points, and seal ageing leading to O-ring failure. Improper installation or reuse of old seals can also cause premature leaks. Addressing mounting points and replacing seals during service reduces the risk of repeat failures.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Peugeot 207; Citroën C3 Picasso
• Product Codes: 9655448980, 9800886980
• Other Numbers: 647705

Compatibility And Notes

This A/C pipe is listed for Peugeot 207 and Citroën C3 Picasso applications. Compatibility may depend on specific engine and air conditioning variants; verify part numbers when ordering. Proper installation by a technician with A/C service equipment ensures reliable operation and long life of the new component.

Whether you are a professional mechanic or a DIY car enthusiast, this replacement pipe is an ideal choice to restore or maintain your car’s air conditioning efficiency. The pipe plays a crucial role in connecting key AC system components, allowing proper circulation of the refrigerant. This ensures that the air conditioning system effectively cools the cabin during hot weather and prevents window fogging during colder seasons.

Technical Information:
Manufacturer: Citroën, Peugeot
Model: Citroën C3 Picasso, Peugeot 207
Product Codes: 9671585480, 9678309780, 6477J3, 9831756280
Additional Numbers: Please refer to the above codes to confirm exact compatibility.

This air conditioning pipe is often subject to wear or damage caused by mechanical stress or corrosion, especially in older vehicles. It is recommended to inspect the pipe regularly and replace it if any signs of leaks, cracks, or corrosion appear. Proper functioning of this component ensures optimal temperature and air quality inside the vehicle, enhancing driving comfort and safety.

Installing this pipe usually involves accessing the AC system behind the dashboard or engine bay and carefully disconnecting the damaged part before fitting the new one. While installation complexity may vary depending on the vehicle model and equipped options, it is generally manageable for skilled professionals and experienced DIYers with basic automotive tools.

Choosing this pipe helps avoid costly repairs resulting from inefficient air conditioning operation and contributes to the longevity of your car’s climate system.

This high-quality air conditioning pipe is suitable for Citroën C3 Picasso and Peugeot 207 vehicles. It is an essential component ensuring the proper operation of your vehicle’s air conditioning system by enabling efficient transport of refrigerant between system parts. Manufactured with precise craftsmanship and premium materials, it guarantees long-lasting functionality and resistance to wear.

As an original part with product codes 9681620980, 9670982980, and 6460XL, you can be confident of full compatibility with your vehicle if it matches the indicated models. DIY car repair enthusiasts and professional mechanics alike will appreciate the straightforward installation that doesn’t require specialized tools or advanced technical knowledge.

Technical Information:
Manufacturer: PSA Group
Model: Citroën C3 Picasso, Peugeot 207
Product Codes: 9681620980, 9670982980, 6460XL
Additional Numbers: 6460XL

The air conditioning pipe plays a vital role in maintaining optimal cooling, especially during hot summer months. Replacement might be necessary in cases of malfunction or refrigerant leaks. When replacing this part, it is recommended to inspect other components of the AC system to ensure overall effectiveness and trouble-free operation.

This offering includes one pipe as shown in the image. To replace this part, it is crucial first to evacuate any remaining refrigerant from the system. Following this, the front bumper must be removed to access and replace the pipe.

Technical Information

• Manufacturer: PSA CITROEN PEUGEOT
• Model: 207
• Product Codes: 9655448980, 9800886980
• Additional Numbers: 647705, 6477G2

This air conditioning pipe is commonly replaced due to wear or damage, which can occur over time. Regular inspections are recommended to maintain the efficiency of your vehicle’s air conditioning system.

Looking for a reliable replacement part for your vehicle’s air conditioning system? This dual air conditioning pipe, compatible with Citroën C3 Picasso and Peugeot 207, featuring product codes 9673520180 and 6477N8, is the ideal choice to restore optimal AC functionality. Specifically engineered for vehicles equipped with the 1.6 HDI engine, it guarantees compatibility and operational efficiency.

Air conditioning pipes are crucial components in a car’s AC system, responsible for the proper transfer of refrigerant fluid between various parts. Maintaining the integrity and performance of these pipes is essential for effective cabin cooling, especially during hot summer conditions. By using an original replacement component, you ensure long-term reliability and uncompromised cooling performance.

Technical Information

• Manufacturer: PSA Peugeot Citroën
• Model: Citroën C3 Picasso, Peugeot 207
• Product Codes: 9673520180, 6477N8

When replacing the air conditioning pipe, it is recommended to proceed carefully to ensure proper sealing and system functionality. This procedure can be performed by experienced DIY mechanics or professional service centers. During installation, it is important to inspect related components such as joints, O-rings, and the condenser to prevent future refrigerant leaks.

If you want a high-quality, efficient replacement part for your vehicle, this air conditioning pipe is an excellent choice. Investing in the right components helps maintain your car in perfect condition, saving time and money in the long run. This product is ready for installation with assured compatibility and performance.

Constructed to withstand high pressures and temperatures, this part maintains the integrity of the air conditioning system, helping to deliver consistent performance. It is highly sought after by professional mechanics and car enthusiasts alike who require reliable and durable parts for repairs or maintenance.

Technical Information:

Manufacturer: Peugeot, Citroën
Models: Peugeot 207, Citroën C3 Picasso
Product Codes: 9655448480, 9670978780, 6477N8
Additional Numbers: The listed product codes correspond precisely with the original equipment specifications, ensuring proper compatibility and identification with the mentioned vehicle models.

If your Peugeot 207 or Citroën C3 Picasso is experiencing air conditioning issues such as reduced cooling efficiency, unusual noises, or refrigerant leaks, replacing the AC pipe could be the solution. Accurate identification and prompt replacement of this pipe are vital to restore your vehicle’s comfort and optimal climate system performance.

Air conditioning pipe designed for Citroën and Peugeot models listed below. This replacement AC line is frequently searched by OEM numbers 9680614780 and 6460TZ and is intended for professional workshops and competent DIY mechanics who require a direct-fit part to restore sealed, leak-free operation of the climate system.

Features And Function

The pipe carries refrigerant between key components of the air conditioning system (compressor, condenser and evaporator), maintaining system pressure and enabling efficient heat exchange. It is made to match original connection types and routing, with corrosion-resistant materials and factory-style fittings to withstand vibration and temperature cycles.

Fitment

• Citroën C2
• Citroën C3
• Citroën C3 Picasso
• Peugeot 207

How To Replace

1. Recover Refrigerant Using Certified Recovery Equipment Before Starting Work.
2. Disconnect The Battery And Follow Manufacturer Safety Procedures To Avoid Electrical Damage.
3. Relieve System Pressure And Remove Fastenings, Noting The Original Routing And Clamp Positions.
4. Replace All Sealing O-Rings At Connections With Correct Size And Lubricant Compatible With The Refrigerant.
5. Install The New Pipe, Secure Clamps And Fasteners, And Tighten To Manufacturer Torque Specifications.
6. Evacuate The System Using A Vacuum Pump, Perform A Leak Test, Then Recharge With The Correct Type And Amount Of Refrigerant And Compressor Oil.
7. Run The Climate System, Verify Proper Pressures And Cooling Performance, And Recheck For Leaks.

Technical Information

• Manufacturer: Stellantis
• Model: Citroën C2, Citroën C3, Citroën C3 Picasso, Peugeot 207
• Product Codes: 9680614780
• Additional Numbers: 6460TZ

Installation Recommendations

Work In A Clean Area To Prevent Contamination Of The A/C System. Always Replace O-Rings When Opening The System And Use The Correct Lubricant For The Installed Refrigerant. Use Calibrated Vacuum And Charging Equipment. If You Do Not Have Certified Recovery And Charging Tools, Have The Refrigerant Recovery And Recharging Performed By A Qualified Workshop.

Most Common Failure Reasons

• Corrosion Caused By Road Salt And Moisture Leading To Pinholes Or Perforation.
• Mechanical Damage From Chafing, Impact Or Improper Routing.
• Degraded Or Hardened O-Rings At Connection Points Causing Leaks.
• Fatigue At Bends Or Fittings Due To Long-Term Vibration And Thermal Cycling.

Attention Citroën and Peugeot users! We offer an air conditioning pipe that is the ideal component for repairing and maintaining your vehicle’s climate control system. This part is specifically designed for the Peugeot 207 and Citroën C3 Picasso models, ensuring compatibility and effective functionality.

The air conditioning pipe is a crucial component for the proper functionality of the climate control system, as it ensures the smooth flow of refrigerant between individual components. Without adequate flow, the system would not function efficiently, negatively impacting your vehicle’s air conditioning performance. Therefore, we recommend choosing high-quality replacement parts that will extend the lifespan of the entire system and save you costs on future repairs.

Technical Information:

• Manufacturer: OEM for Peugeot and Citroën brands
• Model: Peugeot 207, Citroën C3 Picasso
• Product Codes: 9671597380, 6477J0, 9800975380

This air conditioning pipe is originally designed for Peugeot 207 vehicles, including the engine variants 1.4 HDI, 1.4i, and 1.4i 16V, as well as the Citroën C3 Picasso. It is an essential part for the correct operation of the air conditioning system, and its regular inspection and potential replacement enhance the comfort of your vehicle. It is crucial to ensure that the air conditioning system operates without faults, especially during the hot summer months when usage is most intense.

If you are unsure about the compatibility of this part with your vehicle model, please do not hesitate to contact our support team with your vehicle’s model and year for quick and accurate advice. This part is ideal for workshops, mechanics, and home DIY enthusiasts who are not afraid of a challenge and enjoy repairing their cars themselves.

Are you looking for a reliable and high-quality part for repairing the air conditioning system of your Peugeot 206? Our product – the Air Conditioning Pipe – is the perfect solution for Peugeot 206 and 206+ models, providing an effective replacement for original parts. This used auto part features high functionality and long-lasting performance, while being compatible with 1.4, 1.6 16V gasoline and 1.4 HDI engines, ensuring excellent adaptability for the model you are seeking.

Technical Information:
Manufacturer: PSA CITROEN PEUGEOT
Model: Peugeot 206, Peugeot 206+
Product Codes: 9687002580, 6477G4, 6460KL
Other Numbers: 6477G4, 6460KL

The air conditioning pipe we offer is ideal for those seeking an affordable and efficient solution to maintain the optimal functionality of their air conditioning system. Whether you are a mechanic or an enthusiastic DIYer, this product ensures easy installation, allowing you to perform repairs quickly and without unnecessary complications.

With careful selection and inspection of our used parts, you can be confident that this auto part meets all necessary standards for use. Properly chosen and high-quality parts not only extend the lifespan of your vehicle but also ensure that its operation is safe and efficient.

The inventory number and specific labeling indicate that this part can be easily traced and verified for compatibility with your vehicle. We recommend verifying whether this part is suitable for your vehicle before purchasing, ensuring maximum satisfaction with your purchase.