Part description

We offer electric steering motor for Citroën and Peugeot cars, designed for electric power steering. This is a used genuine part that is often searched by serial number – an ideal choice if you are dealing with a faulty booster and need a quick and affordable replacement without compromising on part number compatibility.

Thanks to the mentioned run-in from the donor car, it can be suitable as a spare part in the event of symptoms such as failure of the steering assistance, irregular help of the booster or problems with the electrical part of the steering (while maintaining the same codes).

Technical information

• Manufacturer: Stellantis
• Model: Citroën C3 II; Citroën C3 Picasso; Peugeot 207
• Other numbers: 6700001531B, 400137

Product codes

• Product codes: 9684474880

Installation recommendations

Generally/typically, replacing the electric steering motor requires careful comparison of the part according to the label and compliance with safety principles when working with electrical connectors. The exact procedure may vary depending on the specific car design and steering system.

1) Before assembly

• Compare all numbers on the part with the old part (especially 9684474880 and other numbers listed).
• Check the condition of connectors, connector fuses and cable harnesses in the vicinity (damage, oxidation, loose pins).
• Visually check whether the electric motor has cracks, deformations, traces of overheating or water damage.
• If the original problem was caused by an electrical fault, consider checking the power/grounding and the condition of the connectors to prevent the fault from recurring.

2) Necessary tools and materials

• Basic set of hand tools (ratchet, extensions, wrenches as needed)
• Screwdrivers, or torx/hex according to design
• Cleaning agent for electrical contacts
• Protective gloves, workplace lighting
• Diagnostics (recommended) to check function after assembly

3) Step-by-step assembly procedure

1. Secure the vehicle against movement and prepare access to the part (depending on the vehicle model).
2. Turn off the ignition and safely disconnect the battery.
3. Document the condition and routing of the connectors (a photo before disassembly will help with reassembly).
4. Disconnect the electrical connectors of the electric steering motor – proceed carefully, do not pull on the cables.
5. Unfasten the electric motor according to the design of the given control and dismantle the part.
6. Compare the removed and the new part: mounting, connectors, orientation and number labels.
7. Clean the seating surfaces and check that there is nothing preventing proper seating.
8. Install the electric motor in place and fit the fasteners.
9. Plug the connectors back in and verify proper snapping and locking.
10. Reconnect the battery.
11. Turn on the ignition and check that the system responds as standard (without non-standard sounds and assist failures).
12. If you have diagnostics, perform a control system check and basic functional verification.
• 4) Post-assembly checks and test drive/function verification
  • On the spot, smoothly turn the steering wheel several times in both directions and monitor the evenness of the assistance.
  • Verify that there are no booster dropouts and unusual noises.
  • During a short test drive, observe the behavior of the steering at low and high speed (as safely as possible).

  5) The most common assembly mistakes + how to avoid them

  • Exchanging a part with a different code – always check the numbers on the label, don’t just go by the name.
  • Damage to connectors/pins – disconnect and connect connectors with unlocking, without prying with force.
  • Skip wiring check – the fault may be in the power supply/grounding, not the motor itself.
  • Insufficient seating – poor seating can lead to vibration, noise or repeated failure.

  Reasons why the part is damaged

  • Moisture and oxidation of connectors (deteriorated contact, booster failures).
  • Overload of the steering system (e.g. long-term stress, increased resistance in the mechanical part of the steering).
  • Voltage fluctuations in the on-board network (weak battery, charging problems, bad grounding).
  • Damaged wiring or loose/damaged pins in connectors.
  • Aging of components and thermal stress during operation.
  ]]> https://www.usedpartsvendor.com/chassis-and-axles/management/207-management/steering-column-peugeot-207-4123fj-4123gx/ Thu, 04 Dec 2025 03:13:02 +0000 https://www.usedpartsvendor.com/uncategorized/steering-column-peugeot-207-4123fj-4123gx/ Steering Column For Peugeot 207

  Premium replacement steering column designed for Peugeot 207. This steering column is suitable for professional workshops and skilled DIY mechanics who need a reliable, direct-fit part frequently referenced by product codes 4123FJ and 4123GX. The unit restores precise steering input, mechanical safety features and the correct mounting interface for steering-related components, helping to eliminate play, noise or stiffness in the steering system.

  Technical Information

  • Manufacturer: Stellantis (Citroën/Peugeot)
  • Model: Peugeot 207
  • Product Codes: 4123FJ, 4123GX
  • Additional Numbers: N/A

  Application And Compatibility

  Intended for fitment on Peugeot 207 models that use the part numbers 4123FJ or 4123GX. Often sought under these product codes, the column is a direct-replacement component for the steering assembly where these codes apply. Verify physical match with the removed unit (mounting points, connector types and shaft spline) before installation.

  Function

  The steering column transfers driver steering input from the steering wheel to the steering mechanism while supporting associated components such as the steering shaft, universal joints and electrical connections for switches and steering lock. It also provides collapse characteristics designed to absorb energy in the event of a collision and serves as the mounting point for multifunction switches and, where applicable, the airbag clockspring.

  Symptoms And Common Causes

  • Excessive Play Or Free Movement In The Wheel: Wear in bearings, splines or universal joints.
  • Unusual Noise During Steering (Clicking, Rattling): Loose joints, worn bushings or broken internal components.
  • Stiff Or Notchy Steering Movement: Corrosion, lack of lubrication or internal binding.
  • Steering Lock Or Ignition Issues (If Integrated): Wear or electrical contact faults in the column-mounted ignition/lock mechanisms.
  • Damage After Impact: Bent or deformed column following a collision, compromising alignment and safety.

  Installation Recommendations

  • Disconnect Battery: Always disconnect the vehicle battery before starting work and follow manufacturer safety procedures, particularly when handling airbag systems.
  • Mark Steering Position: Mark the position of the steering wheel relative to the shaft to preserve steering alignment during removal and installation.
  • Follow Manufacturer Torque And Procedures: Fasteners and clamp torque settings must follow Peugeot specifications. Use correct tools and tightening sequence.
  • Handle Airbag And Electrical Connectors With Care: If the clockspring or airbag connectors are present, follow safe removal and reinstallation procedures to avoid damage or fault codes.
  • Check Alignment After Installation: After fitting, verify steering wheel center and carry out wheel alignment if necessary. Confirm proper operation of steering-related electrical functions and warning lamps.
  • Professional Installation Recommended For Complex Cases: If the column integrates steering angle sensors, ignition locking, or multifunction wiring, installation by a qualified technician is advised.

  Expected Service Life And Replacement Advice

  There Is No Fixed Replacement Interval. A Steering Column Can Last The Lifetime Of The Vehicle Unless Subjected To Wear, Corrosion Or Impact Damage. Replace The Column If You Observe Persistent Play, Noise, Binding, Or Any Compromise To The Steering Lock Or Safety Functions.

  Why This Part Is Often Replaced

  Steering columns are commonly replaced due to mechanical wear (bearings, splines, universal joints), corrosion in older vehicles, impact damage from accidents, or failure of integrated components such as ignition locks or electrical contacts. Prompt replacement restores steering precision and safety.

  ]]> https://www.usedpartsvendor.com/chassis-and-axles/management/207-management/citroen-peugeot-9673481980-6700002324-4001wc/ Thu, 13 Mar 2025 03:06:48 +0000 https://www.usedpartsvendor.com/uncategorized/citroen-peugeot-9673481980-6700002324-4001wc/ Steering Motor for CITROËN C3 and PICASSO, PEUGEOT 207
  From a vehicle with a mileage of 42,000 km

  You are in the right place if you are looking for a quality used steering motor for your Citroën or Peugeot vehicle. This part comes from a Citroën C3 and Picasso and Peugeot 207, which had only 42,000 km, ensuring its high reliability and long lifespan even after installation in your vehicle.

  This steering motor is an ideal choice for restoring smooth and precise steering control, which is essential for safe driving and comfort. Steering motors often wear out due to prolonged use, making replacement with a functional, well-maintained part from a low-mileage vehicle a reasonable choice.

  Technical Information:
  Manufacturer: PSA Group (PEUGEOT CITROËN)
  Model: For Citroën C3, Citroën C3 Picasso, Peugeot 207
  Product Codes: 9673481980, 6700002324, 4001WC
  Additional Numbers: 1611951880

  Using the original product code will facilitate the search for the correct part and ensure compatibility with your vehicle. This steering motor has been carefully removed from the donor vehicle and is ready for immediate installation. Installing the steering motor is a process you can manage yourself with basic tools; however, for best results, professional installation is recommended.

  By purchasing a used part from our e-shop, you not only receive quality and great pricing but also the assurance of quick delivery and reliability of the tested part. If you have any questions or need assistance with your selection, feel free to contact us. Our specialists are always available for you.

  Add this steering motor to your cart and take an important step towards restoring the optimal performance and safety of your vehicle. With our product, you gain assurance and satisfaction on every mile.

  ]]> https://www.usedpartsvendor.com/chassis-and-axles/management/207-management/citroen-peugeot-6700001938-4001f8/ Thu, 13 Mar 2025 03:06:22 +0000 https://www.usedpartsvendor.com/uncategorized/citroen-peugeot-6700001938-4001f8/ The Steering Electric Motor is an essential component for ensuring smooth and efficient steering operation in your Citroën C3 or Peugeot 207. This specific motor, identified by product codes 6700001938 and 4001F8, is ready for installation, making it a reliable choice for your vehicle repair needs.

  Our Steering Electric Motor guarantees a safe and comfortable driving experience. Designed exclusively for Citroën C3 Picasso and Peugeot 207 models, you can expect perfect compatibility and performance. The installation process is straightforward and does not require any special tools, making it an ideal option for both automotive professionals and DIY enthusiasts. Given its importance, we recommend regular checks on this part, as wear and tear can significantly affect your vehicle’s handling.

  Technical Information:

  • Manufacturer: Original Part Peugeot Citroën
  • Model: Citroën C3 Picasso, Peugeot 207
  • Product Codes: 6700001938, 4001F8
  • Additional Numbers: Confirmed compatibility with selected models

  Our Steering Electric Motor not only offers performance but also long-lasting durability. For further questions or specifications, feel free to contact our customer service, who will be happy to provide you with all necessary information for the right selection and installation. Ensure that choosing the correct part can vastly influence the functionality and safety of your vehicle.

  ]]> https://www.usedpartsvendor.com/chassis-and-axles/management/207-management/citroen-peugeot-4001a2-steering-linkage/ Sun, 17 May 2020 00:04:10 +0000 https://www.usedpartsvendor.com/citroen-peugeot-4001a2-steering-linkage/ The Complete Steering for Citroën and Peugeot models is an essential component for optimal vehicle handling. This part, with product number 4001A2, is designed specifically for Citroën C3 and Peugeot 207, ensuring compatibility and reliability.

  This steering system originates from a Peugeot 207 1.4 HDI, with a mileage of only 42,000 km, delivering a dependable performance for your vehicle. Regular steering issues can arise due to wear and tear, particularly in high-mileage vehicles. Factors such as road conditions and driving habits can accelerate the decline of steering components, making timely replacement crucial for your vehicle’s safety and handling.

  Installation of this steering system is straightforward, typically requiring basic mechanical skills. It is recommended to consult a professional mechanic or refer to the vehicle’s service manual for detailed installation procedures.

  Technical Information

  • Manufacturer: PSA
  • Model: Citroën C3, Peugeot 207
  • Product Codes: 4001A2
  • Other Numbers: 4001A2
  ]]>