Product Description

This brake pipe is designed to connect the ABS/ESP hydraulic module on Citroën C4 II and Peugeot 308 T7 models. Supplied under product codes 4888L4 and 4888L5, the part forms a critical section of the vehicle’s hydraulic braking circuit, routing brake fluid between the master cylinder, ABS/ESP module and wheel circuits. It is suitable for professional workshops and experienced DIY mechanics who perform brake system repairs or ABS unit replacements.

Benefits And Application

• Direct Fit For Citroën And Peugeot Vehicles: Engineered to match OE routing and fittings for Citroën C4 II and Peugeot 308 T7.
• Restores Proper Hydraulic Flow: Ensures reliable fluid transfer to and from the ABS/ESP module for correct anti-lock and stability control operation.
• Part Numbers For Easy Search: Commonly referenced by codes 4888L4 and 4888L5, increasing findability in parts catalogs and online searches.

Technical Information

• Manufacturer: Stellantis
• Model: Citroën C4 II; Peugeot 308 T7
• Product Codes: 4888L4, 4888L5
• Additional Numbers: No further numbers provided

Why The Part Fails

Brake pipes are exposed to road debris, salt and moisture, which commonly leads to external corrosion over years of service. Corrosion can cause pitting and ultimately leaking at the pipe body or fittings. Mechanical damage from impact, incorrect routing or poor previous repairs can also deform or crack the pipe. Internal blockages or contamination are less common but can occur if foreign material enters the system during maintenance.

Installation Recommendations

• Preparation: Lift and safely support the vehicle. Clean the surrounding area to avoid contamination when opening the hydraulic circuit.
• Tools: Use flare-nut wrenches or proper line wrenches to avoid rounding fittings. Have a torque wrench available to tighten fittings to manufacturer specifications.
• Replacement Steps: Remove the damaged pipe by loosening the fittings at the ABS/ESP module and the mating connection points. Install the new pipe following the original routing, ensuring no sharp bends or contact with moving parts.
• Sealing Elements: Replace any crush olives, sealing washers or fittings as required by the connection design. Do not reuse damaged sealing components.
• Bleeding: After installation, bleed the brake system thoroughly to remove air and restore firm pedal feel. Use the manufacturer-specified brake fluid (commonly DOT4) and follow the correct bleeding sequence for the vehicle.
• Final Checks: Inspect for leaks at all connections, verify correct routing and secure clips, then perform a careful road test at low speed to confirm braking performance.

Service Life And Maintenance Tips

Brake pipes are typically long-life items but will eventually succumb to corrosion or mechanical damage. Regular visual inspections during service, especially in regions with heavy road salt, help catch early corrosion. When any sign of pitting, severe rust, deformation or leakage is found, replace the pipe immediately rather than attempting temporary repairs.

Who Should Fit This Part

Recommended For Professional Mechanics And Experienced DIYers: Replacement requires correct handling of the brake hydraulic system and thorough bleeding. If you are not confident in brake system repairs, seek professional installation to ensure safety.

Braking systems are critical for vehicle safety, and a well-functioning brake pipe is essential for the proper operation of the ABS and ESP modules. Over time, brake pipes can corrode or become damaged due to exposure to the elements, leading to potential braking failures. It is advisable to inspect your brake pipes regularly and replace them as needed to maintain peak performance.

Replacing a brake pipe can be done by following these general steps: start by safely lifting your vehicle and securing it with jack stands. Locate the damaged section of the brake pipe, disconnect it at the fittings, and remove it carefully. Then, install the new brake pipe securely and ensure there are no leaks before lowering your vehicle.

Technical Information

• Manufacturer: PSA
• Model: Citroën C5 X7, Peugeot 407
• Product Codes: 4888AL, 4888AY
• Additional Numbers: NFP

Are you looking for a reliable and durable brake pipe for your Citroën or Peugeot vehicle? Our brake pipe, compatible with Citroën C8 and Peugeot 807, is an ideal choice for repairing or maintaining your vehicle’s brake system. This part, matching product codes 488873 and 488872, integrates seamlessly into your car’s braking system, ensuring safe and efficient operation.

This product is manufactured to meet all original specifications, guaranteeing maximum performance. As a critical component of the ABS ESP system, this brake pipe plays an essential role in precise braking and stable handling under various driving conditions. Thanks to its quality and thorough condition inspection before delivery, you can be confident that you receive a product that is both reliable and safe.

Technical Information

Manufacturer: PSA Citroën Peugeot
Model: Citroën C8, Peugeot 807
Product Codes: 488873, 488872
Additional Numbers: Not available

Our brake pipe offers long-term durability and reliability due to high-quality materials and careful maintenance. Although used, it has passed comprehensive inspection and is ready for installation in your vehicle. Installation should be performed by a professionally trained technician to ensure safety and proper system functionality.

The brake pipe is an essential element for the ABS ESP system’s operation and is key to maintaining vehicle control during braking in demanding situations. Regular inspection and timely replacement are crucial for your safety on the road.

Investing in a high-quality and verified brake pipe means investing in your safety and ride comfort. Do not wait until the first signs of wear appear—secure your vehicle today with this essential component.

Order this brake pipe for your Citroën C8 or Peugeot 807 to ensure your vehicle is equipped with reliable parts that guarantee smooth operation. We offer fast shipping and assistance selecting the correct part for your car.

Are you looking for reliable and high-quality brake pipes for your Peugeot 206? Introducing the original brake pipes with codes 4887W1 and 4887W3, designed for connection with the ABS module with ESP. This part ensures smooth functionality and safety of your braking system.

Brake pipes are a crucial element in your vehicle, providing reliable transmission of brake fluid between the individual components of the braking system. In our offer, you will find a set of two pieces of these pipes, which will reliably restore the full functionality of the brakes in your Peugeot 206, which is especially important for its safe operation.

Technical Information:
Manufacturer: PSA CITROEN PEUGEOT
Model: Peugeot 206
Product Codes: 4887W1, 4887W3
Additional Numbers: Set includes 2 pipes

Installation of these brake pipes is straightforward and uncomplicated; however, we recommend that a professional service performs the installation to ensure proper connection of the pipes to the ABS module with ESP. Generally, brake pipes are components that may show signs of wear over time, so their regular inspection and replacement can prevent more serious problems and accidents related to the braking system.

This product is ideal for Peugeot 206 owners, as well as for mechanics and DIY repairers looking for a reliable solution to restore their braking system. Using these pipes ensures that your Peugeot 206 will brake precisely and safely, as it should.

Our team is here to answer any questions you may have about this product, its installation, or compatibility with your vehicle. Whether you are a professional service or it is your private project, we are happy to provide you with all the necessary support. Choose quality parts for your vehicle and ensure that your travels will always be safe and smooth.

Technical Information

• Manufacturer: Citroën
• Model: C5 (2005 – 2007)
• Product Codes: 488742
• Other Numbers: NFP

This Brake Pipe is specifically designed for the ABS and ESP module of Citroën and Peugeot vehicles, primarily fitting the Citroën C5 models produced between 2005 and 2007. It plays a critical role in ensuring reliable hydraulic pressure transmission within the braking system, contributing to optimal braking performance and vehicle safety.

If you are unsure about compatibility with your vehicle, please provide your Vehicle Identification Number (VIN) in the order notes. We will verify the part’s suitability to ensure you receive the correct brake pipe.

Replacement and Maintenance

This brake pipe is a common wear component in braking systems exposed to high pressure and varying temperatures. Over time, the pipe can develop leaks or corrosion, compromising brake efficiency. Replacement is recommended immediately after any signs of brake fluid leakage, decreased brake responsiveness, or during regular brake system maintenance, typically every 5 to 7 years depending on vehicle use and environmental conditions.

Installation requires safely relieving brake system pressure and draining brake fluid before removing the old pipe. Proper torque specifications must be followed when fitting the new pipe to prevent leaks and ensure system integrity. It is advisable for professional mechanics or experienced DIY enthusiasts to perform this replacement.

Technical Information

• Manufacturer: PSA (Peugeot Société Anonyme) / Citroën
• Model: Citroën C5 (2005 – 2007)
• Product Codes: 488741
• Additional Numbers: NFP

Are you looking for reliable replacement parts for your vehicle? Our brake pipes specifically designed for Citroën and Peugeot are the ideal choice for mechanics and DIY repair enthusiasts. This key component of the brake system is manufactured with a focus on quality and long-lasting performance, which is essential for the safety of your vehicle.

The brake pipe is an essential part of the ABS and ESP systems, ensuring effective distribution of brake fluid under pressure to the braking mechanisms. Proper functionality of this part is crucial for the prompt response of your vehicle in critical situations, thus enhancing your safety while driving. Moreover, considering the specific compatibility requirements with Citroën C5 X7 models, this part is precisely manufactured for correct fitting and functionality.

Technical Information

• Manufacturer: Original PSA CITROËN PEUGEOT
• Model: Citroën C5 X7
• Product Codes: 4888Q8, 4888Q9
• Additional Numbers: N/A

Using these certified parts ensures that your vehicle operates as intended, keeping your brakes in optimal condition. Proper brake pipes also enhance the overall efficiency of your braking system, which is particularly critical for vehicles in intense traffic or challenging driving conditions.

Why risk using non-original parts when you can obtain verified components directly from Citroën and Peugeot manufacturers? Order our product today and make sure your vehicle remains safe and reliable on the road.

As part of the braking system, the brake pipe is responsible for transporting brake fluid from the master cylinder to the brake assembly, ensuring responsive braking performance. Over time, brake pipes can corrode or leak, leading to reduced braking efficiency and potential safety hazards. Regular inspection and replacement every few years, or at the first sign of deterioration, are crucial to maintaining optimal vehicle performance.

This product is compatible with various Citroën and Peugeot models, making it a versatile choice for mechanics and DIY enthusiasts alike. Easy to install, the brake pipe connects directly to the ABS and ESP systems, ensuring a swift and effective upgrade for your vehicle’s braking capabilities.

Technical Information

• Manufacturer: PSA
• Model: Citroën, Peugeot
• Product Codes: 4887T3, 4887T2
• Additional Numbers: 4887T2, 4887T3