Right half-axle (drive shaft) for Citroën and Peugeot cars – original PSA part from disassembly, suitable for replacing a worn or noisy half-axle. Also searched for right drive shaft, right half axle, right CV shaft. OEM part numbers: 9815636080, 1667425780.

Why choose this part?
– Original PSA quality: robust construction and precise positioning for quiet, vibration-free operation.
– Correct seating and connecting surfaces – quick assembly without modifications.
– Search numbers: 9815636080, 1667425780 – easy compatibility verification by VIN or old part.

Technical information
– Location: right side (passenger), front axle, front wheel drive vehicles.
– Design: complete semi-axle with inner and outer joint; some applications use a center (support) bearing with bracket – refer to OEM number and photo documentation.
– Platform: cars based on the EMP2 architecture (according to model/year).
– Design compatibility varies depending on engine (e.g. 1.2 PureTech, 1.5/1.6 BlueHDi, etc.) and transmission (manual/automatic). Please check the numbers and designs before ordering.

Compatible PSA models
– Citroën Berlingo III (K9)
– Peugeot Rifter (K9)
– Peugeot Partner III (K9)
– Peugeot 308 T9
Note: The same OEM number 9815636080 / 1667425780 can also be found in concern siblings (e.g. Opel Combo E, Toyota ProAce City, Fiat Doblo III) in specific engines – always check by VIN and part number.

How to check compatibility
– Compare the OEM number on your old half axle or in the catalog: 9815636080, 1667425780.
– Check the design in the photos (length, type of inner/outer joint, possible center bearing/bracket).
– In case of confusion, state the VIN – we will verify the match.

Assembly recommendations for problem-free operation
– Replace the transmission output gufero, check the transmission for leaks and the oil level.
– Check the condition of the cuffs, in case of damage, replace them immediately and use a high-quality lubricant for CV joints.
– Follow the manufacturer’s tightening torques (hub nut and center bearing bracket screws, if fitted).
– After installation, perform a test drive and check whether there are any vibrations or leaks.

Search key numbers
– 9815636080
– 1667425780
– Right half axle Citroën Peugeot, right drive shaft, PSA EMP2, Berlingo III, Partner III, Rifter, 308 T9

This is a used original part. The condition and exact equipment can be seen from the photos and product description. Always compare the listed OEM numbers with your car to ensure compatibility.

Original left half axle (drive shaft) for Citroën/Peugeot cars – suitable according to OE numbers 9809149380, 1611621080. This is a used original part from disassembly, ideal for professional workshops and home mechanics who are looking for a reliable replacement at a reasonable price.

Key features
– Side: left (front axle, driver’s side for left-hand drive vehicles)
– Type of part: complete semi-axle with homokinetic joints and sleeves (according to the photo)
– OEM/PSA numbers: 9809149380, 1611621080 (also listed as 98 091 493 80, 16 116 210 80)
– Compatibility: according to OE numbers – typically K9 and T9 platform (see below)
– Origin: original PSA part from disassembly, suitable as a direct replacement

Compatibility by model (indicative – always check against VIN/OE)
– Citroën Berlingo III (K9, approx. 2018→)
– Peugeot Rifter (K9, approx. 2018→)
– Peugeot Partner III (K9, approx. 2018→)
– Peugeot 308 T9 (approx. 2013–2021)
– Selected related models on the same platform may share a part (e.g. Opel Combo E, Toyota ProAce City, some Fiat Doblo) but dimensions and design differ – confirm compatibility by OE numbers or VIN only.

Why choose an original semi-axle from disassembly
– Precise fit: the original PSA part corresponds to the design of the hub, gearbox and ABS system of the given model.
– Reliability: factory quality material and joints, correct geometry and balance.
– Savings: significantly lower price compared to the new original, without compromise in compatibility.

Technical notes for the correct selection
– The number of splines (inner/outer), the type and number of teeth of the ABS ring and the total length of the axle shaft may vary depending on the engine (e.g. 1.2 PureTech, 1.5/1.6 HDi), the type of transmission (manual/automatic) and the year of manufacture.
– Always compare: OE number on the old part, number of grooves, joint diameters and sleeve design with photos of the offered piece.
– If you are not sure, enter the VIN – we will verify compatibility.

Typical symptoms of a faulty half-axle that this part addresses
– Knocking or crunching in raid
– Vibration during acceleration
– Play in the joints, damaged cuffs and grease leakage

Installation recommendations
– Change the gufero (seal) of the transmission outlet, check the transmission oil level.
– Tighten the hub nut to the manufacturer’s torque, use new self-locking nuts/bolts.
– After assembly, perform a clearance check and a test drive; for cars with ABS, check the correct function of the sensor.

Search terms and labels
– Citroën/Peugeot left half axle, drive shaft left, front left half axle, PSA original part, 9809149380, 1611621080, Berlingo III K9, Partner III K9, Peugeot Rifter, Peugeot 308 T9

Note
– Photos are part of the description – please refer to the actual design of the offered piece.
– The listed OE numbers are used to compare compatibility; we are not a manufacturer of spare parts, this is an original from disassembly.