This replacement fuel filler cap cover is an ideal fit for Peugeot 206 vehicles and is painted in factory color code EKQ (Lucifer Red). Searched often by part numbers 9639426610, 9628582180 or 1508C1, this cover restores the exterior finish after minor impacts, corrosion or paint damage and keeps the fuel filler area protected. Designed for mechanics and DIY enthusiasts, the panel offers a direct-fit installation and accurate color match for a discreet repair.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 206
• Product Codes: 9639426610, 9628582180, 1508C1
• Additional Numbers: EKQ (Color Code – Lucifer Red)

Installation Recommendations

Installation is straightforward for professionals and competent DIY mechanics. Typical replacement steps:

• Open the filler flap and locate the hinge screws or retaining clips visible on the inner edge.
• Remove the retaining screws or clips and carefully detach the hinge pin/spring. In some vehicles access to fasteners may require removal of the inner wheelarch liner or access panel.
• Fit the new cover, align the hinge and refit the spring/pin and screws. Check that the flap opens and closes smoothly and that the latch engages correctly.
• If the part requires painting or blending, mask surrounding panels and follow appropriate paint-preparation procedures to ensure a factory-quality finish.

Use appropriate hand tools and avoid levering on painted edges to prevent chipping. If the locking mechanism is required, order the lockable version from the Bodywork – Locks section and follow the lock fitting instructions supplied with that item.

Why This Part Fails Most Often

• Collision Damage: Minor parking impacts or fuel-flap knocks commonly crack or deform the cover.
• Corrosion: Rust at the hinge or surrounding panel can seize or weaken the mounting points, especially in older or salted-road vehicles.
• Latch/Hinge Wear: Repeated use or stressed hinges can cause misalignment, preventing proper closing.
• Paint Damage: Chips and scratches from refuelling or road debris lead to visible deterioration and may require replacement for cosmetic reasons.

Commonly searched by OEM numbers (9639426610 / 9628582180 / 1508C1) and color code (EKQ), this filler cap cover offers an efficient, cost-effective repair option to restore appearance and function to Peugeot 206 vehicles.

The replacement fuel filler cap cover is designed specifically for the Peugeot 206 and restores the original look and function of the fuel door area. Supplied in paint code KTH (Thorium Grey) for a factory-matched finish, this cover is a direct-fit spare part referenced under common part numbers 9639426610, 9628582180 and 1508C1. Ideal for professional workshops and DIY mechanics who want a precise, visually consistent repair after minor impacts, corrosion or wear.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 206
• Product Codes: 9639426610, 9628582180, 1508C1
• Other Numbers: Color Code KTH (Thorium Grey)

Fitment And Function

This fuel filler cap cover is intended for Peugeot 206 body styles and restores the external fuel door appearance and locking interface. The cover protects the fuel filler neck from dirt, moisture and tampering, and accepts the original lock mechanism if required. Many workshops search by part numbers 9639426610, 9628582180 or 1508C1 to find the correct item quickly.

Installation Recommendations

• Inspect The Existing Hinge And Latch: Before fitting the new cover, check hinge brackets and latch striker for damage or deformation and replace if needed.
• Remove Interior Trim Or Access Panel If Required: Some variants require removal of the luggage-side trim to reach the hinge fasteners—use appropriate trim tools to avoid breakage.
• Unscrew Or Unclip Old Cover Carefully: Retain screws or clips that are reusable, but replace any corroded fasteners to ensure secure mounting.
• Align New Cover And Fasten Securely: Fit the cover, adjust alignment to match adjacent body panels, then tighten fasteners to a firm, even setting.
• Check Locking And Sealing: If the cover includes or uses the lock cylinder, verify smooth locking operation and check the seal around the filler opening to prevent water ingress.
• Touch-Up Paint And Finish: If minor paint adjustment is needed after fitting, use manufacturer-matched paint for best appearance.

Why This Part Most Commonly Fails

• Impact Damage: Minor collisions or parking knocks commonly deform or break the filler cap cover and hinge.
• Corrosion And Wear: Moisture and road salt can corrode hinge fixing points and fasteners, causing sagging or loss of function.
• Latch Or Hinge Fatigue: Repeated use, vandalism or forced entry attempts can wear the latch mechanism and hinge pivot.
• Paint Damage And Surface Degradation: UV exposure and environmental factors fade or blister paint, prompting replacement for visual reasons.

Part numbers referenced: 9639426610, 9628582180, 1508C1. Suitable For Peugeot 206 Repairs And Cosmetic Restorations. Searches By Part Number Increase The Chance Of Quick Identification In Catalogs And Marketplaces.

Original fuel tank cap/cover (tank door) for Peugeot 206 in EYL color – Iceland gray metallic (EYLC). This is a used original PSA part, ideal as a quick replacement for cracked or broken doors. Fits perfectly, no need to adjust anything. Also often searched for Peugeot 206 tank door, 206 tank cap, tank neck cover 1508C1, EYLC.

Key parameters
– Purpose: Peugeot 206 (approx. 1998-2009; hatchback, SW, CC – always check with OEM numbers/VIN)
– OEM/PSA numbers: 1508.C1 (1508C1), 9639426610, 9628582180
– Color: EYL/EYLC – gray metallic Iceland (factory paint)
– Design: outer door/fuel tank neck cover
– Supplied without fuel cap and without lock; you can find the lockable plug in the Body – Locks category
– Material: painted plastic (original PSA)
– Fuel compatibility: petrol and diesel

Status and benefits
– Used, fully functional original – exact fit and factory quality
– Cosmetic signs of use corresponding to the age of the piece; condition see photos in menu
– Can be fitted without painting if the EYL/EYLC color code matches your car

Assembly and tips
– The replacement takes place on the original hinge/hinge; usually plug and play
– Before assembly, compare the hinge shape and color code with your original part
– To be sure of compatibility, we recommend checking against the VIN or the OEM numbers listed above

Replaces/alternatively referred to as
– Peugeot 206 tank cap, tank door, tank neck cover, tank flap
– 1508C1, 1508.C1, 9639426610, 9628582180, EYL, EYLC, Gris Iceland, Iceland Gray

Note: The lockable fuel plug/lock can be purchased separately in the Body – Locks section. If you are unsure of compatibility, please compare part numbers or contact us with the VIN to verify.

Technical Information

• Manufacturer: Peugeot
• Model: 206
• Product Codes: 9639426610, 9628582180
• Additional Numbers: 1508C1

The fuel tank cap serves a critical function in protecting the fuel tank from contaminants and evaporation loss. It is essential to ensure that the fuel system remains sealed to maintain vehicle efficiency. Over time, fuel tank caps may wear out due to exposure to heat and environmental conditions, leading to gas fumes leakage or even fuel contamination. It is advisable to check the cap periodically and replace it if there are signs of damage or wear.

Compatible with the following product codes: 9639426610, 9628582180, and 1508C1, this fuel tank cap is essential for maintaining your vehicle’s performance and fuel efficiency.

Installation is straightforward; simply align the cap with the fuel tank’s opening and twist to secure it in place. Regular checks are advised, as fuel caps can wear out over time due to exposure to environmental conditions and fuel vapors. A faulty cap can lead to fuel leaks or increased emissions, making timely replacements crucial for maintaining your vehicle’s integrity.

Technical Information

• Manufacturer: Peugeot
• Model: 206
• Product Codes: 9639426610, 9628582180, 1508C1
• Additional Numbers: EGJ

Designed for easy installation, the Fuel Tank Cap Cover can be replaced effortlessly. If you’re experiencing fuel leakage or difficulty in closing your fuel tank, replacing the cap is a recommended solution. Regular checks of the fuel cap can prevent costly fuel evaporation and ensure optimal vehicle performance.

Technical Information:

• Manufacturer: Peugeot
• Model: 206
• Product Codes: 9628582180, 9639426610, 1508C1
• Additional Numbers: N/A

High-quality replacement fuel filler flap cover for Peugeot 206 and 206+ models. This aluminium-effect cover is a used part and therefore shows signs of normal wear and surface marks, making it an economical option for professional workshops and DIY enthusiasts restoring or repairing bodywork. Ideal when the original flap is dented, scratched, or the hinge or lock mechanism is damaged—offers direct-fit compatibility with the listed part numbers for faster sourcing and installation.

Features And Benefits

• Direct Fit For Peugeot 206 / 206+ — Designed To Match Original Mounting Points.
• Aluminum Effect Finish — Good Visual Match For Vehicles With Similar Trim.
• Cost-Effective Used Part — Fast Availability Compared To New OE Panels.
• Includes Common OE References For Easier Identification By Part Number.

Technical Information

• Manufacturer: Stellantis (Peugeot / Citroen)
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 962669, 1508F6
• Additional Numbers: 9642555380

Fitment And Compatibility

This filler flap is suitable for Peugeot 206 and 206+ variants that accept the listed product codes. Always compare the part number and the physical shape of the flap (hinge position and locking aperture) with the original component to ensure a correct match. The aluminium-effect finish may differ slightly from factory paint—consider repainting if a perfect color match is required.

Installation Recommendations

• Tools Typically Required: Phillips or Torx drivers, small socket set, plastic trim removal tool, and light lubricant.
• Basic Replacement Steps: Open the flap, access the hinge fasteners (usually reachable from inside the wheel arch or trunk area), remove retaining screws or clips, disconnect any lock actuator or tether if present, transfer springs or fittings if required, mount the replacement flap, tighten fasteners, and test opening/closing and locking operation.
• Adjustment: Align the flap to ensure even gaps and smooth closing—loosen hinge bolts slightly to adjust position, then retighten.
• Protection: Mask surrounding panels during any paint touch-up to avoid overspray. Lightly lubricate hinge and latch components with appropriate grease to reduce wear and noise.

Common Failure Reasons

• Impact Damage: Parking knocks and minor collisions commonly dent or deform the flap.
• Hinge And Clip Wear: Plastic hinge pins or clips can break after repeated use or from corrosion.
• Corrosion: Moisture and salt can corrode hinge fasteners and surrounding metal, leading to stiffness or detachment.
• Latch/Lock Failure: Mechanisms can seize or the locking actuator cable can disconnect, preventing proper closure.
• Finish Degradation: UV exposure and chemical agents can fade or damage the aluminium-effect coating over time.

How Often It Fails

The filler flap is not a scheduled service item and typically lasts many years. Replacement is most often triggered by accidental damage, corrosion in aggressive environments, or plastic hinge/clip failure. Frequency depends on vehicle use, exposure to road salt and moisture, and maintenance.

Notes For Mechanics And DIYers

This part is aimed at professional repair shops and skilled DIYers. Because it is a used component, inspect mounting points and hinge geometry before installation. Minor body alignment or paint work may be required to achieve a factory finish. Part numbers included in this listing speed up identification: 962669, 1508F6, 9642555380.

Regularly replacing the fuel tank cap is crucial, as a faulty or missing cap can lead to fuel leaks, reduced fuel efficiency, and increased emissions. It is recommended to inspect the cap periodically and replace it if worn or damaged to ensure optimal performance of your vehicle.

This cap is available in a vibrant red color, specifically KKN – PAINT RED ADEN, and features a locking mechanism for added security. Find this cap under the BODY – LOCKS section, ensuring that your fuel system remains secure and functional.

Technical Information

• Manufacturer: PSA CITROEN PEUGEOT
• Model: Peugeot 206
• Product Codes: 9639426610, 9628582180, 1508C1
• Additional Numbers: KKNB

The fuel cap cover is an important component that protects the fuel filler neck from dirt, dust, and moisture, which prevents contamination of your fuel. Over time, covers can wear out due to exposure to weather or minor impacts. Replacing a damaged or faded fuel tank cap cover enhances your vehicle’s appearance and ensures the fuel system remains secure.

Installation is straightforward: the old cover can be removed without specialized tools, and the new cover simply snaps into place. For added security, a locking fuel cap is available separately in the ‘Bodywork – Locks’ section to complement this cover.

Technical Information

• Manufacturer: PSA (Peugeot Société Anonyme)
• Model: Peugeot 206
• Product Codes: 9639426610, 9628582180, 1508C1
• Additional Numbers: KMFD Blue RACIFE

This aluminium-effect fuel filler flap cover is a direct-fit replacement designed for the Peugeot 206. It combines a factory-style appearance with corrosion-resistant finish to restore the vehicle’s exterior around the fuel access point. The part is often searched for and identified by its product codes listed below, so check compatibility before purchase.

Fitment And Function

The flap cover is mounted on the vehicle’s rear quarter panel and protects the fuel filler neck from dirt, moisture and damage while providing the external access point for refuelling. It is a body-element replacement part; a locking filler cap is available separately in the BODY – LOCKS section if you require a keyed lock function.

Installation

Replacement is straightforward for a competent mechanic or a DIY enthusiast with basic tools. Typical steps: open the fuel flap, remove any retaining screws or clips, unclip the hinge and separate the old cover from the body, then position and secure the new cover with the original fasteners. Recommended tools: Phillips screwdriver, small flat screwdriver or trim tool and pliers. Expected workshop time: 10–30 minutes depending on access and fastener condition.

Durability And Common Failure Modes

Common reasons for replacement include impact damage (parking scrapes or petrol pump incidents), hinge wear or corrosion, paint or finish degradation, and deformation that prevents proper closure. The aluminium-effect finish resists corrosion better than bare metal but can still scratch or fade over time. Replace the flap if it does not close securely or if the hinge has excessive play.

Benefits

• Direct-fit replacement for easy installation.
• Aluminium-effect finish for a neat, factory-like appearance.
• Compatible with common PSA part numbers for quick identification.
• Lockable filler cap option available separately for added security.

Technical Information

• Manufacturer: PSA (Citroën/Peugeot)
• Model: Peugeot 206
• Product Codes: 1508H2, 1508K2, 1508F6, 962669
• Additional Numbers: 1508F6, 1508H2, 1508K2, 962669