Part description

This washer tank (washer fluid reservoir) is intended for selected Citroën and Peugeot cars as indicated in the documents. It is an original part, suitable as a replacement in the event of a ruptured tank, leakage, damage to the neck or after a defect in the fastening area.

Important: according to the documents washer motors and the cap may not be part of the delivery. Therefore, before assembly, check whether you have available accessories from the old container, or whether it needs to be supplemented.

Technical information

• Manufacturer: Stellantis (OEM/Original Part)
• Model: Peugeot 1007, Peugeot 207, Peugeot 301, Citroën C-Elysée
• Other numbers: 6431F3

Product codes

• Product codes: 9648337580, 6431F3

Installation recommendations

Generally/typically, the following procedure applies to replacing the washer reservoir. The exact steps may vary depending on the specific design of the car and access to the container.

1) Before assembly

• Compare the new part with the old part: the shape of the container, the location and diameters of the holes for the motors/sensors (if any), the tube routing and the attachment points.
• Check the condition of the neck, thread/fit of the cap and the bearing surfaces for the motor seals.
• Check whether the motor and cap are included in the delivery – according to the documents they may not be. Prepare the original motors/cap if they are ok.

2) Necessary tools and materials

• Basic set of keys and sockets, screwdrivers
• Pliers for tube clips (according to type), or a plastic pry bar for removing covers
• Container for catching liquid, rags/towels
• Cleaning agent for degreasing and leak checking (e.g. water for rinsing)

3) Step-by-step assembly procedure

1. Secure the car against movement and allow surrounding parts to cool if the car has been in operation.
2. Disconnect the electrical connectors of the washer motors (and any level sensor, if fitted).
3. Drain the liquid from the container into a prepared container (or disconnect the tubing and collect the liquid safely).
4. Mark the tubes (e.g. front/rear circuit) to avoid confusion during reassembly.
5. Disconnect the washer hoses and release the line clips/holds.
6. Dismantle the canister fastening (screws/handles according to design) and remove the canister.
7. Move the usable components from the old one (typically motors, seals, lid) to the new container, if they are not included in the delivery.
8. Check and clean the sealing points; when folding, pay attention to the correct seating to avoid leakage.
9. Install the container back into the car and tighten the fixings sufficiently so that the plastic does not crack.
10. Connect the tubes in the correct direction, secure them with clips and store them in their original holders.
11. Connect the electrical connectors.
12. Top up the washer fluid and check that the container is secure and that nothing is leaking.
• 4) Post-assembly checks and test drive/function verification
  • Verify the sprinkler function and check the operation of the motors by listening.
  • Check for leaks at the motors, hose connections and at the lid neck (especially after the first few minutes of operation).
  • After a short drive or after several uses of the washer, check again for moisture around the canister.

  5) The most common assembly mistakes + how to avoid them

  • Motor leak: poorly seated or damaged gasket – always check the seating surface and correct seating.
  • Swapping tubes: mark them before disassembly.
  • Plastic cracking: do not overstretch the fixing points, the plastic container is sensitive to overstretching.
  • Forgotten connector: after assembly, check that all connectors are properly engaged.

  Reasons why the part is damaged

  • Aging of plastic and microcracks due to temperature changes and vibrations.
  • Mechanical damage (impact, abrasion, damage during previous repair or manipulation).
  • Leakage at motors/sealing – hardened or damaged sealing elements can lead to fluid leakage.
  • Damaged neck or cap – poor fitting, torn seating or cracks will cause leakage or contamination of liquid.
  • Inappropriate fluid or long-term neglect of maintenance that can contribute to deposits and subsequent problems in the system.
  ]]> https://www.usedpartsvendor.com/body/sprayer-containers/c1-and-107-sprayer-containers/washer-tank-citroen-c1-and-peugeot-107-6405v9/ Wed, 01 Oct 2025 02:03:13 +0000 https://www.usedpartsvendor.com/uncategorized/washer-tank-citroen-c1-and-peugeot-107-6405v9/ Washer fluid reservoir for PEUGEOT 107 and CITROËN C1 up to 2013

  Reliable replacement washer fluid reservoir designed for Peugeot 107 and Citroën C1 models produced up to 2013. This washer bottle is an essential service part for workshops and DIY mechanics who need a durable, correctly shaped tank that fits the original mounting points. Frequently sought under part numbers 6405V9 and B000643380, this unit restores proper windshield cleaning function after cracks, leaks or impact damage.

  Technical Information

  • Manufacturer: Citroën / Peugeot (Stellantis)
  • Model: Peugeot 107, Citroën C1 (up to 2013)
  • Product Codes: 6405V9, B000643380
  • Other Numbers: Not Specified

  Fitment And Function

  The washer fluid reservoir stores windshield washer fluid and supplies it to the washer pump and nozzles. It is shaped to match the engine bay layout of the Peugeot 107 and Citroën C1, ensuring correct hose routing and secure mounting. This part is a direct-fit replacement for the original tank and helps maintain clear visibility in wet and dirty conditions.

  Installation Recommendation

  Installation is straightforward for an experienced mechanic or competent DIYer. General steps:

  • Open the bonnet and locate the washer reservoir in the engine bay.
  • Disconnect the negative battery terminal as a safety precaution before working on electrical components.
  • Drain any remaining washer fluid, then unplug the washer pump electrical connector (if present) and disconnect the washer hoses.
  • Remove retaining clips or bolts securing the reservoir, withdraw the old tank and replace with the new unit, ensuring correct alignment of mounting points and hose connections.
  • Reconnect electrical connector and hoses, refill with washer fluid, reconnect the battery and test the washer system for leaks and proper operation.

  Why The Part Commonly Fails

  • Material Degradation: Plastic tanks can become brittle over time due to heat cycles and UV exposure, leading to cracks and leaks.
  • Freezing Damage: In climates without appropriate antifreeze in the washer fluid, frozen fluid can expand and split the reservoir.
  • Impact And Corrosion: Minor collisions or debris contact in the engine bay can puncture or crack the bottle.
  • Worn Seals And Grommets: Leaks often occur where the pump or hoses pass through the tank grommets.

  Whether you are outfitting a workshop or repairing your own vehicle, this washer fluid reservoir (6405V9 / B000643380) offers a practical solution to restore washer functionality and keep windscreen visibility reliable. Add this direct-fit replacement to your repair order and ensure safe driving visibility in all weather conditions.

  ]]> https://www.usedpartsvendor.com/body/sprayer-containers/c4-picasso-grand-picasso/washer-tank-citroen-peugeot-607-9638831080-9638831180-643198-2/ Thu, 06 Feb 2025 05:22:58 +0000 https://www.usedpartsvendor.com/uncategorized/washer-tank-citroen-peugeot-607-9638831080-9638831180-643198-2/ The Windshield Washer Reservoir is an essential component for maintaining clear visibility while driving. Designed for the Peugeot 607, this reservoir ensures that your windshield and front headlights remain clean and free of obstructions, enhancing safety on the road. Over time, reservoirs can crack or become clogged, leading to a decrease in performance.

  Replacing the Windshield Washer Reservoir is straightforward and generally involves disconnecting the fluid lines and electrical connectors, then removing the old unit and installing the new one. Regular inspections of your washer system can prevent unexpected failures and enhance overall vehicle maintenance.

  Technical Information

  • Manufacturer: PSA
  • Model: Peugeot 607
  • Product Codes: 9638831080, 9638831180
  • Other Numbers: 643198
  ]]> https://www.usedpartsvendor.com/body/sprayer-containers/c4-picasso-grand-picasso/washer-fluid-level-sensor-peugeot-607-9753584780-643453-2/ Thu, 23 May 2024 04:10:28 +0000 https://www.usedpartsvendor.com/uncategorized/washer-fluid-level-sensor-peugeot-607-9753584780-643453-2/ The Washer Fluid Level Sensor is an essential component for your Peugeot and Citroën vehicles, specifically designed for models such as Peugeot 607, Citroen C5, and Peugeot 406. This sensor plays a crucial role in monitoring the fluid level in the washer reservoir, ensuring that you have adequate fluid for optimal visibility during driving. A malfunctioning sensor may lead to warnings on your dashboard, indicating low washer fluid, which can compromise your safety in adverse weather conditions.

  Commonly, this component may experience wear and tear due to consistent exposure to liquid and varying temperatures. It’s recommended to routinely check the sensor’s performance, especially during seasonal transitions when washer fluid usage increases. A timely replacement can prevent operational disruptions and maintain your vehicle’s functionality.

  For installation, simply detach the old sensor and connect the new one, ensuring secure fittings to prevent leaks. It’s advisable to refer to your vehicle’s service manual for detailed installation instructions.

  Technical Information

  • Manufacturer: PSA
  • Model: Peugeot 607, Citroen C5, Peugeot 406
  • Product Codes: 9753584780
  • Other Numbers: 643453
  ]]> https://www.usedpartsvendor.com/body/sprayer-containers/c4-picasso-grand-picasso/washer-tank-peugeot-206-9628747480-643195/ Fri, 22 Dec 2023 05:03:26 +0000 https://www.usedpartsvendor.com/uncategorized/washer-tank-peugeot-206-9628747480-643195/ The Windshield Washer Fluid Reservoir is an essential component for maintaining visibility during rainy conditions. Compatible with Peugeot 206 models, this reservoir ensures a steady supply of washer fluid to your windshield, enhancing safety on the road.

  Listed under product codes 9628747480 and 643195, this reservoir is a direct replacement for the original part, offering a perfect fit and reliable performance. Over time, reservoirs can develop leaks due to wear and tear or damage, necessitating a replacement. Regularly checking the washer fluid level and the condition of the reservoir can help prevent visibility issues.

  Technical Information

  • Manufacturer: PSA
  • Model: Peugeot 206
  • Product Codes: 9628747480, 643195
  • Other Numbers: 643983

  Replacing the washer fluid reservoir typically involves removing the old unit, disconnecting the fluid lines, and installing the new reservoir. Performing this maintenance task can help ensure your windshield washer system operates effectively, contributing to overall driving safety.

  ]]> https://www.usedpartsvendor.com/body/sprayer-containers/washer-tank-citroen-c5-x7-9683488280-9682177680-9683486480-6431l1-2/ Wed, 07 Jun 2023 04:13:30 +0000 https://www.usedpartsvendor.com/uncategorized/washer-tank-citroen-c5-x7-9683488280-9682177680-9683486480-6431l1-2/ The Washer Fluid Reservoir for Citroën C5 X7 is an essential component designed to ensure optimal windshield visibility by holding and distributing washer fluid efficiently. Made with high-quality materials, this reservoir is built to withstand temperature fluctuations and resist cracking over time, making it a reliable part for your vehicle maintenance.

  Commonly found under part numbers 9683488280, 9682177680, 9683486480, and 6431L1, this reservoir is compatible with Citroën C5 X7 models. When replacing this component, it’s important to check for signs of wear or damage, as a failing reservoir can lead to decreased washer fluid performance and ultimately, impaired visibility.

  Changing the Washer Fluid Reservoir is a straightforward process, typically taking less than an hour. Begin by removing any connections to the old reservoir, carefully detach it from its mounting, and install the new reservoir in the reverse order. Regular checks and timely replacements can prevent fluid leaks and potential damage to surrounding components.

  Technical Information

  • Manufacturer: PSA
  • Model: Citroën C5 X7
  • Product Codes: 9683488280, 9682177680, 9683486480
  • Other Numbers: 6431L1
  ]]> https://www.usedpartsvendor.com/body/sprayer-containers/c4-picasso-grand-picasso/washer-tank-citroen-c4-picasso-9671568380-6431g7/ Thu, 30 Mar 2023 04:07:04 +0000 https://www.usedpartsvendor.com/uncategorized/washer-tank-citroen-c4-picasso-9671568380-6431g7/ Introducing the Washer Fluid Reservoir designed specifically for Citroën C4 Picasso and Grand Picasso models. This essential component plays a crucial role in maintaining clear visibility while driving by supplying washer fluid to the windscreen.

  Commonly sought after under product numbers 9671568380, 9671568180, 9671568080, 9671567680, and additional references 6431G7, 6431N7, this reservoir is compatible with various Citroën models. It is a direct replacement for damaged or worn-out units, ensuring your vehicle remains roadworthy.

  With regular use, washer fluid reservoirs can deteriorate over time due to exposure to harsh weather conditions and the chemicals used in washer fluids. Therefore, it is advisable to inspect this component periodically and replace it as needed to ensure optimal performance.

  Technical Information

  • Manufacturer: Citroën
  • Model: C4 Picasso, Grand Picasso
  • Product Codes: 9671568380, 9671568180, 9671568080, 9671567680
  • Other Numbers: 6431G7, 6431N7
  ]]>