Used exterior trim piece designed for the Citroën C3 II (A51). This left‑side protective strip with chrome detail restores the original appearance of the area above the front fender and mirror base. Ideal for professional workshops and skilled DIYers looking for a direct-fit replacement part numbered 9025V8. The part preserves the vehicle’s styling while protecting the bodywork edge from minor impacts and abrasion.

Compatibility

Designed For Citroën C3 II (A51). Often Searched By Part Number: 9025V8.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C3 II (A51)
• Product Codes: 9025V8
• Other Numbers: None Available

Function And Benefits

The trim protects the upper edge of the front wing and the mirror mounting area from stone chips, scratches and minor impacts. The chrome finish restores the original visual accent and contributes to a factory-correct appearance. As an exterior trim component, it does not affect vehicle mechanics but plays an important role in preventing further paint damage and corrosion around the mirror/fender joint.

How It Is Replaced

Replacement Is Straightforward For Experienced Technicians: remove the mirror glass or release the mirror cover where necessary to access retaining clips; carefully pry out the old trim with plastic trim tools to avoid damaging paint; inspect and replace any broken clips or retainers; clean the mounting surfaces of dirt and adhesive residues; press the new trim into place until all clips engage. Refit mirror components and verify fitment and gap alignment.

Installation Recommendations

• Use Plastic Trim Tools To Avoid Paint Damage.
• Replace Any Broken Clips Or Retainers To Ensure Secure Fitment.
• If The Assembly Incorporates Electrical Elements (Indicators/Heating), Isolate The Circuit Or Disconnect The Battery Before Work.
• Work On A Clean, Dry Surface And Check Panel Gaps After Installation.
• Lubricate Clips Lightly With Plastic-Safe Grease If Necessary For Easier Installation.

Why This Part Most Often Fails

Exterior Mirror And Fender Trims Fail Primarily From Impact Damage (Parking Scrapes, Side Swipes Or Road Debris). Secondary Causes Include Weathering And UV Exposure Leading To Chrome Peeling Or Surface Fade, And Mechanical Damage To Retaining Clips During Previous Repairs. Because Clips And Tabs Are Plastic, They Are Prone To Breakage When Panels Are Removed Improperly.

Notes For Buyers

Part Number 9025V8 Is Frequently Used To Locate This Item In Catalogs And Search Engines. Suitable For Professional Fitters And Knowledgeable DIY Enthusiasts. Inspect Mounting Clips And Adjacent Bodywork When Replacing To Avoid Recurring Fitment Issues.

This genuine-style protective trim (part number 9025V9) is designed for the passenger-side exterior area on Citroën C3 II (A51) vehicles. The piece combines a protective function with a chrome-accented finish to restore the original appearance and protect the bodywork around the right mirror/fender area. Ideal for professional workshops and experienced DIY enthusiasts, this replacement helps maintain the vehicle’s factory look and prevents further damage to the underlying panels.

Technical Information

• Manufacturer: Citroën (Stellantis)
• Model: Citroën C3 II (A51)
• Product Codes: 9025V9
• Additional Numbers: Passenger Side / Right

Function And Fitment

The Trim Protects The Outer Edge Above The Right Fender/Mirror Area From Stone Chips, Scratches And Weathering While Providing A Chrome Detail That Matches Factory Trim. It Sits Over The Outer Body Flange And Secures With Clips Or Tabs To The Door/Mirror Housing. Correct Fitment Restores Aerodynamics And Visual Continuity Between Mirror And Bodywork.

How To Replace

• Prepare The Vehicle: Park On A Level Surface And Protect The Paint With Soft Towels Or Masking Tape Around The Work Area.
• Access The Mounting Points: Depending On Design, Remove The Mirror Glass Or Open The Mirror Housing To Reach Retaining Clips—Use A Plastic Trim Tool To Avoid Damage.
• Remove The Old Trim: Gently Pry Off The Old Trim By Releasing Clips Or Screws. Keep Broken Clips For Replacement If Necessary.
• Fit The New Trim: Align Tabs And Clips, Press Evenly Until The Trim Clicks Into Place. Ensure All Clips Engage And The Chrome Edge Sits Flush With The Body.
• Final Check: Verify Mirror Operation And That No Seal Or Cable Is Pinched. Clean The Area To Remove Fingerprints Or Residue.

Installation Recommendations

Use Dedicated Plastic Trim Tools To Avoid Scratching Paint Or Breaking Clips. Inspect All Retaining Clips And Replace Any Damaged Fasteners To Ensure Long-Term Retention. If The Mirror Glass Must Be Removed, Handle It Carefully And Keep It Supported To Prevent Dropping. For Best Results, Fit The Trim At Moderate Temperatures To Improve Flexibility Of Plastic Clips.

Most Common Failure Causes

• Impact Damage From Road Debris Or Minor Collisions Causing Cracks Or Broken Clips.
• Plastic Fatigue And Clip Breakage Due To Age, Repeated Removal, Or Temperature Cycling.
• Surface Wear And Fading From UV Exposure, Leading To Discoloration Of The Painted/Coated Finish.
• Improper Previous Repairs Or Incorrect Reinstallation Causing Poor Fitment And Rattles.

This part Is Frequently Searched By Its Product Code 9025V9—Include The Code When Searching For Fast, Accurate Replacement Options. Suitable For Professionals And Confident DIYers Who Want A Reliable Visual And Protective Repair For The Passenger-Side Mirror/Fender Area.

Upgrade or replace the interior mirror of your Citroën C4 Picasso / Grand Picasso with this OEM-compatible auto-dimming unit. Designed for technicians and DIY enthusiasts, this mirror reduces glare from trailing headlights, improves night driving comfort and contributes to safer driving conditions. The unit corresponds to the original mounting and electrical connections used on first‑generation C4 Picasso models, making installation straightforward for experienced mechanics.

Key Features

– Automatic anti‑glare (electrochromic) dimming to reduce rearward glare at night.
– Plug‑in electrical connector for power supply to the dimming function.
– Direct replacement for factory mirror mounts on first‑generation Citroën C4 Picasso and Grand Picasso vehicles.
– Robust housing designed for OEM fit and finish.

Benefits For Workshops And DIYers

– Faster installation thanks to direct-fit design and standard mounting plate.
– Improves driver comfort and safety during night driving.
– Commonly searched by product codes (listed below), increasing findability in parts catalogs and search engines.
– Suitable for routine replacement during interior refurbishments or after windshield replacement where mirror transfer is not possible.

Installation Overview

Basic replacement steps (general guidance for trained technicians):

• Remove the plastic cover or trim surrounding the mirror base on the windshield.
• Disconnect the mirror electrical connector carefully to avoid damaging pins.
• Release the mirror from the windshield mounting button — either by sliding it off the bracket or removing the retaining screw/clip, depending on the original mounting type.
• Mount the new mirror onto the windshield bracket and secure it according to the original fastener method.
• Reconnect the electrical connector and verify dimming operation before reassembling the trim.

Note: When working on any powered interior components, exercise electrical safety and isolate the circuit if necessary. Check the vehicle fuse for the mirror/dimming circuit if the unit does not power up.

Technical Information

• Manufacturer: Citroën (Stellantis)
• Model: Citroën C4 Picasso, Citroën Grand Picasso — First Generation (typical model years 2006–2013)
• Product Codes: 96834998BJ, 8153SH
• Other Numbers: 8153 SH, 96834998 BJ

Installation Recommendations

– Verify the mirror mounting type on the vehicle (sliding button vs. screw‑mounted) before ordering to ensure compatibility.
– Inspect the windshield mounting button for damage or corrosion; replace if worn to guarantee secure attachment.
– Ensure connectors are clean and pins are straight; use dielectric grease sparingly on exposed terminals if appropriate.
– If the mirror has additional functions (e.g., compass, temperature display), confirm wiring and fuses related to those circuits.
– Test the mirror’s dimming function with the ignition on before closing trims to confirm proper operation.

Most Common Failure Reasons

– Electrical Faults: Corroded connectors, broken wires or blown fuses that interrupt power to the dimming cell.
– Moisture Ingress: Water or condensation can damage internal electronics or the electrochromic cell over time.
– Impact Damage: Minor collisions, heavy jolts or improper removal can crack or dislodge the mirror housing or mounting button.
– Ageing: The electrochromic element and associated electronics can degrade after many thermal cycles, leading to reduced dimming performance or complete failure.

Choosing an OEM‑matching replacement with the correct product code helps ensure fitment and consistent long‑term performance. Always follow manufacturer procedures and use appropriate tools for safe and reliable installation.

Description

This left side exterior mirror is a direct-fit replacement for the Peugeot 206, offering electric adjustment and a heated glass element for clear vision in cold or wet conditions. Finished in EZR Grey Aluminium paint, it is intended for the driverʼs door and uses a 5-pin electrical connector. The part numbers associated with this unit include 96480953XT and 8153KQ, making it easy to find via catalog searches or part-number lookups.

Designed for professional workshops and competent DIY mechanics, this mirror restores full functionality—mirror adjustment and heating—after impact or electrical failures. The unit is an advantageous choice when the original mirror housing or electronics are damaged but the door mounting points are intact. Minor cosmetic marks are visible as shown in the photos.

Technical Information

• Manufacturer: Peugeot / Stellantis
• Model: Peugeot 206 (Driver Side)
• Product Codes: 96480953XT, 8153KQ
• Other Numbers: EZR, 5-pin connector

Installation Recommendations

Installation is straightforward for an experienced technician. Typical steps:

• Remove the interior triangular trim on the driver door to access the mirror mounting nuts.
• Disconnect the 5-pin electrical connector before loosening the fixing nuts.
• Unscrew the mirror retaining nuts, support the mirror to prevent dropping, and remove the old unit.
• Fit the replacement mirror, tighten the mounting nuts to the manufacturerʼs torque, reconnect the electrical plug and test adjustment and heating functions before refitting the trim.

Recommended tools: Torx/spline sockets or appropriate spanners, trim removal tools, and a multimeter for electrical checks. Always disconnect the battery or isolate the vehicle electrical system before working on powered mirrors to avoid short circuits or accidental motor operation.

Why This Part Fails Most Often

Common failure causes for exterior mirrors on the Peugeot 206 include:

• Impact damage from collisions or knocks, leading to broken housings, cracked glass, or stripped mounting points.
• Wear of the mirror adjustment motor or actuator after long service life or heavy use.
• Corrosion or wiring faults in the connector and door harness, causing intermittent or complete loss of power to the heater or motor.
• Failure of the heating element due to moisture ingress or electrical issues.

Fitment Notes

This unit is specified for the Peugeot 206 driver side with electric adjustment and heating functions. Verify the 5-pin connector and EZR paint code match the vehicle specification before installation. Part numbers 96480953XT and 8153KQ are commonly used references for this mirror.

Upgrade or replace your damaged right side mirror with a direct-fit unit designed for Peugeot 307 models. This electrically adjustable mirror includes an integrated temperature sensor with a 6-pin connector and comes finished in ETS Cendre Gray paint. Ideal for professional mechanics and DIY enthusiasts, the unit restores full mirror adjustment and sensor functionality without the need for additional parts. Minor paint blemishes may be present, but the mirror is structurally intact and fully operational.

Technical Information

Manufacturer: Stellantis / Peugeot
Model: Peugeot 307 (307 I) — Passenger Door Right
Product Codes: 8149A, 8149AX, 8149AX ETSC
Other Numbers: ETSC

Key Features

• Electrically adjustable mirror motor for precise positioning.
• Integrated temperature sensor (6-pin connector) for climate and mirror-heating functions.
• Painted Finish: ETS Cendre Gray — ready to fit without additional painting for matching interiors/exteriors.
• Direct fit for Passenger Door (Right Side) on Peugeot 307 models.

Installation Recommendation

Disconnect the vehicle battery before starting work to prevent electrical shorts. Typical replacement steps:

1. Remove the interior mirror trim or triangular door cover to access mounting fasteners.
2. Unscrew the mirror mounting bolts while supporting the mirror from the outside.
3. Carefully unplug the 6-pin electrical connector for the motor and temperature sensor.
4. Fit the new mirror, connect the 6-pin connector, and loosely install mounting bolts.
5. Reconnect the battery, test mirror adjustment, heating and sensor signals, then tighten mounting bolts to manufacturer torque and reassemble the trim.

Why This Part Fails Most Often

• Impact Damage: Collisions or knocks from curbs and doors are the most common causes of physical failure.
• Water Ingress and Corrosion: Moisture can corrode connectors or motor terminals, causing intermittent or permanent electrical failure.
• Motor Wear: Repeated use and age can wear the adjustment motor, reducing responsiveness or causing failure.
• Sensor Faults: Temperature sensors or wiring can fail due to corrosion or wiring fatigue.

Practical Notes

This mirror is suitable for mechanics and experienced DIYers who are comfortable removing door trim and working with electrical connectors. Verify connector type and mirror mounting pattern visually before installation. After installation, always confirm full functionality of electric adjustment and sensor outputs prior to final reassembly.

Order this right exterior mirror for Peugeot 307 to restore safe visibility and full mirror functionality — a cost-effective replacement that gets your vehicle back on the road quickly.

High-quality left side exterior mirror designed for Citroën C4 first generation vehicles. This electrically operated mirror (EZRC) is a direct-fit replacement part identified by product codes 8149ZT and 1608065480, offering the exact connector layout (5 pins, configured as 3+2) and paint finish (Grey Aluminium) for seamless installation. Ideal for professional technicians and experienced DIYers who need a reliable, OEM-compatible unit that restores full mirror adjustment and appearance after damage or wear.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C4 (First Generation)
• Product Codes: 8149ZT, 1608065480
• Other Numbers: EZRC
• Mounting Position: Left (Driver’s Side)
• Connector: 5-Pin (3+2)
• Operation: Electrically Adjustable
• Color / Finish: Grey Aluminium (EZR Paint)

Installation Recommendations

• Prepare Tools: Trim removal tools, ratchet set, Torx/Phillips as required for door card and mirror fasteners.
• Safety First: Disconnect the vehicle battery before disconnecting electrical connectors to avoid short circuits and protect electronics.
• Access: Remove the interior door trim or triangular trim piece to reach the mirror mounting bolts and electrical connector.
• Disconnect: Unplug the 5-pin connector (noting the 3+2 configuration) and carefully free the wiring from clips.
• Remove/Fit: Unscrew the mirror mounting nuts, remove the old mirror and fit the replacement. Tighten fasteners to manufacturer torque where available and reconnect the electrical plug.
• Function Check: Before reassembling the door trim, reconnect the battery and verify mirror movement and any additional electrical functions.
• Finish: Refit interior trims, ensuring clips and fasteners are secure. If paint match is critical, minor touch-up or respray may be required for exact color blending.

Why This Part Fails

• Impact Damage: The most common cause is external impact (parking knocks, collisions) that cracks the glass or breaks the housing and mounting points.
• Water Ingress and Corrosion: Moisture can enter the mirror housing over time, causing motor failure, connector corrosion, or short circuits.
• Wear of Electric Actuator: Repeated use and age can lead to worn gears or a failed adjustment motor, reducing movement or causing noise.
• Broken Folding Mechanism: Manual or automatic folding joints can wear or break, preventing proper stowage.

Notes

This unit matches original connector and paint code information provided. Fitment is based on the listed product codes and the Citroën C4 first generation specification—verify part numbers if necessary before installation. Designed for technicians and DIYers familiar with door trim removal and electrical connector handling.

This right side exterior mirror is a direct-fit replacement for Citroën C4 first generation vehicles and is commonly searched under product codes 8149ZV and 1608065580. Finished in EZR Gray Aluminium paint, the mirror is electrically adjustable and includes an integrated temperature sensor. Designed for professional garages and competent DIY enthusiasts, this unit restores correct mirror positioning and functionality after damage or electrical failure.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C4 (First Generation) — Right Side / Passenger Door
• Product Codes: 8149ZV, 1608065580, EZRC
• Additional Numbers: Connector 7 Pins (5+2)

Function And Features

The mirror provides side and rear visibility while allowing electronic adjustment from the cabin for safe lane changes and parking. The integrated temperature sensor can be used by vehicle systems (for example climate or mirror-heating logic) and the electrical drive enables precise mirror angle control. The 7-pin connector (5+2) supplies power and signal connections required by the motor, sensor and any additional functions.

Replacement Procedure

Basic Replacement Steps (General Guidance):

• Disconnect Battery Before Work: Disconnect the negative terminal to prevent short circuits when handling electrical connectors.
• Remove Interior Door Trim Or Mirror Cover: Carefully detach the trim panel or triangular cover to access the mirror mounting screws and electrical connector.
• Unplug Connector: Locate and unplug the 7-pin connector (5+2) from the mirror module.
• Remove Mounting Bolts: Unscrew the mirror fixing bolts and remove the old mirror from the door aperture.
• Install New Mirror: Position the replacement mirror, secure the mounting bolts to the manufacturer’s torque specification, connect the wiring harness, and refit the interior trim.
• Function Test: Reconnect the battery and verify electrical adjustment, sensor function and any heating/defrosting feature if applicable.

Installation Recommendations

• Use Appropriate Tools: Torx or hex bits are commonly required for door trim and mirror fasteners — check fastener type before starting.
• Protect Door Trim: Use trim removal tools to avoid breaking clips or scratching interior surfaces.
• Check Connector Condition: Inspect pins and plugs for corrosion or bent contacts and clean if necessary before reassembly.
• Follow Manufacturer Torque And Refit Sequence: Ensure correct bolt torque and clip engagement to avoid wind noise or water ingress.

Why The Part Commonly Fails

Most Failures Are Caused By Impact Damage (Collisions Or Parking Scrapes), Water Ingress Leading To Corrosion Of Connectors Or Motor, And Wear Of The Electric Adjustment Motor After Many Years Of Use. Glass Breakage From Stones Or Vandalism Is Also Frequent. Electrical Faults May Occur From Damaged Wiring Or Moisture Entering The Connector.

Notes On Compatibility

The Part Is Intended For Citroën C4 First Generation Vehicles And Is Frequently Searched By The Codes 8149ZV And 1608065580. Verify That The Connector Type (7 Pins 5+2) And Color Match Your Vehicle When Selecting Replacement Parts.

Recommendation For Professional Service

If The Mirror Contains Additional Functions That Require Calibration Or Integration With Vehicle Systems, Consider Professional Installation. For Typical Mechanical Or Electrical Replacement, An Experienced Technician Or Confident DIYer With Basic Tools Can Perform The Swap Following The Above Steps.

This replacement left mirror is designed for mechanics and experienced DIYers who need a reliable, direct-fit solution for Peugeot 307 vehicles. The unit combines electric adjustment, heating element and power-folding for convenient operation and improved safety in cold or wet conditions. It is commonly referenced under product code 8149VV and is available in different finishes — please check the color code (LKR) to match your vehicle’s paint.

Key Features

• Driver’s Side (Left) Exterior Mirror for Peugeot 307
• Electric Adjustment for precise mirror positioning
• Integrated Heating Element to clear ice and fog
• Electric Folding Mechanism for parking protection
• Painted Finish: LKR – Babylone Red
• Connector: 7‑pin (5+2)
• Typical Professional or DIY Replacement Part Number: 8149VV

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model(s): Peugeot 307 (including 307 I)
• Product Codes: 8149VV
• Other Numbers: 7 PIN (5+2); Color Code: LKR (Babylone Red)

Installation Recommendations

• Before starting, disconnect the negative battery terminal to avoid short circuits and unintended airbag deployment.
• Remove the interior door trim or triangular mirror cover following the vehicle manufacturer’s procedure to access the mirror mounting bolts and connector.
• Carefully unplug the 7‑pin connector and compare pins to ensure full correspondence (5+2 configuration).
• Support the mirror during removal to prevent damage to the glass or paint. Remove mounting nuts, fit the new mirror, and torque fasteners to manufacturer specifications if available.
• Reconnect the electrical connector, reconnect the battery and test all functions (adjustment, heating and folding) before refitting the door trim.
• Check mirror alignment and ensure the painted finish matches surrounding panels. Replace any damaged clips or fasteners removed during disassembly.

How The Part Is Replaced

Typical replacement involves removing the interior trim piece near the mirror, disconnecting the electrical connector, unbolting the mirror from the door, and fitting the new unit in reverse order. After connection, verify mirror adjustment, heater activation and folding operation. Reassemble the door trim once correct operation is confirmed.

Why This Part Fails Most Often

• Mechanical Damage: Impact or collisions commonly crack the mirror housing or glass.
• Water Ingress And Corrosion: Moisture can corrode connectors, wiring and the small electric motors, causing failures in adjustment, heating or folding functions.
• Wear Of Internal Actuators/Gears: Repeated use can wear the plastic gears inside the folding mechanism or the adjustment motor.
• Connector Or Wiring Faults: Broken pins, loose terminals or damaged wiring in the door harness lead to intermittent or total loss of function.
• Electrical Supply Issues: Blown fuses, faulty switches or relays can appear as mirror failures but originate elsewhere in the vehicle’s electrical system.

Notes For Professionals

When replacing, ensure connector pinout and available functions (heated, folding, memory if applicable) match the vehicle specification. Test all features before completing the job to avoid return visits. For painting or color-matched units, confirm the LKR color code corresponds to the vehicle’s paint.

Keywords: Left mirror, Driver side mirror, Peugeot 307 mirror, Electric folding mirror, Heated mirror, 8149VV.

This replacement right passenger mirror is designed for professional workshops and DIY mechanics who demand reliable fitment and full functionality. It restores electric adjustment, heating and power folding functions while matching the vehicle colour LKR (Red Babylone). The part number 8149VT is commonly used when searching for compatible units.

Features

• Electric Adjustment For Precise Mirror Positioning
• Heated Glass To Reduce Fogging And Ice Build-Up
• Electric Folding Mechanism For Parking And Narrow Spaces
• Integrated Temperature Sensor For Climate-Related Functions
• Colour Matched To LKR – Paint Red Babylone
• 8 Pin Connector Configuration (6+2)

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 307 (307 I)
• Product Codes: 8149VT, LKRD
• Additional Numbers: Connector 8 Pin (6+2); Colour Code LKR (Red Babylone)

Compatibility And Application

Suitable For Front Right Passenger Side Of Peugeot 307 Models Where The Vehicle Uses An 8-Pin Mirror Connector And Colour Code LKR. Often Searched Under Part Number 8149VT.

Installation Recommendations

• Disconnect The Battery Before Starting Work To Avoid Short Circuits And Airbag System Issues.
• Remove Interior Door Panel To Access Mirror Fasteners And Wiring Harness.
• Carefully Disconnect The 8-Pin Connector And Any Additional Plugs (Heater/Temperature Sensor).
• Unscrew Mirror Mounting Bolts, Replace Unit, And Refit Bolts To Manufacturer Torque Settings.
• Reconnect Wiring And Test All Functions (Adjustment, Heating, Folding, Sensor Signals) Before Reassembling Door Trim.
• Follow Manufacturer Procedures To Avoid Damage To Clips, Wiring, Or Door Trim.

Most Common Reasons For Failure

• Water Ingress Causing Corrosion Of Connectors And Electric Motors.
• Wear Of Adjustment Motors Or Gearsets After Years Of Use.
• Mechanical Damage From Impacts Or Folding-Related Stress.
• Faulty Heating Element Or Broken Wiring To The Heated Glass.
• Damage To Folding Mechanism Due To Obstructions Or Ice.

Replacing A Faulty Mirror Restores Safety And Convenience — Clear Rearward Vision And Reliable Operation Are Essential For Everyday Driving. Order By Part Number 8149VT To Ensure Fast Identification And Compatibility.

This painted left exterior mirror is a direct-fit replacement designed for Citroën C1 and Peugeot 107 models. Supplied in Lipizzan White (KWD), the assembly restores original appearance and function for door-mounted mirrors. Ideal for professional workshops and DIY mechanics who look up parts by OEM numbers, the unit matches factory fitment and mounting points to simplify installation.

Key Features

– Direct-fit left (driver) side door mirror assembly for Citroën C1 / Peugeot 107.
– Painted Finish: Lipizzan White (KWD) — ready to install without additional painting.
– OEM Reference Numbers Included For Easy Identification And Search.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1, Peugeot 107
• Product Codes: 87940-0H010, 87940-0H011
• Additional Numbers: 8153YW, 815290, KWD

Installation Recommendations

Replacement is straightforward for anyone with basic workshop tools. Typical steps:

• Remove the interior triangular trim on the door to access the mirror mounting nuts — use a trim tool to avoid damage.
• Support the mirror from outside, then remove the retaining nuts/bolts securing the mirror to the door.
• Carefully disconnect the electrical connector if the mirror has power adjustment/heating. If unsure, isolate the battery before working on electrical connections to prevent short circuits.
• Fit the new mirror assembly, reconnect the wiring harness, and tighten the mounting nuts to the manufacturer’s specified torque. Replace trim and confirm mirror adjustment and any electrical functions operate correctly.

Recommended Tools: Trim panel tool, socket set or Torx depending on vehicle variant, and a torque wrench for final tightening. Take care not to overtighten plastic studs to avoid cracking the mirror base or door skin.

Why This Part Fails Most Often

Door mirrors typically fail due to external mechanical damage (side impacts, parking collisions) or gradual wear of the internal adjustment motor/gear. Other common causes include water ingress and corrosion of electrical connectors on powered mirrors, or paint and housing deterioration from prolonged exposure to the elements. In many cases the glass can crack from impacts while the housing may split or the mount break during minor collisions.

Fitment Notes

Designed For Driver Side (Left) Fitment. Confirm The Correct OEM Number When Searching Or Ordering To Ensure Exact Match With Your Vehicle Variant. The Listed Product Codes Are Commonly Used References For These Models.