This original-style right-hand exterior mirror assembly is designed for Citroën C8 and Peugeot 807 models and is a suitable replacement for workshops and DIY enthusiasts who need a direct-fit electric mirror with folding function and outside temperature sensing. The unit preserves factory connectivity (10-pin, split 6+2+2) for easy plug-and-play installation on compatible vehicles. The outer painted part shows minor cosmetic abrasion but does not affect mechanical or electrical function. Ideal for mechanics looking for a quick, reliable repair using familiar part numbers.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C8, Peugeot 807
• Product Codes: 14009349YJ, 14009349ZR, 8153FV
• Additional Numbers: Color Code EYJ (Aster Gray)
• Connector: 10-pin (arranged 6+2+2)
• Features: Electric Adjustment, Electric Folding, External Temperature Sensor
• Side: Passenger (Right-Hand)

Installation Recommendations

Recommended for experienced technicians and competent DIY mechanics. Typical replacement steps:

• Remove interior door trim or triangular mirror cover to access mounting screws and connector.
• Carefully disconnect the 10-pin electrical connector (note the 6+2+2 arrangement) and any adhesive or clips holding the mirror wiring harness.
• Support the mirror assembly from the outside, remove the mounting bolts, then extract the mirror from the door.
• Fit the new mirror assembly, loosely start the bolts, reconnect the electrical connector and test functions (adjustment, folding, heating if present, and temperature sensor) before final torquing.
• Tighten mounting bolts to manufacturer torque where available, refit the interior trim and verify door operation.

Practical tips: Protect painted surfaces during installation, check wiring and connector pins for corrosion before assembly, and calibrate mirror adjustment after reconnection. Allow 20–45 minutes for a professional replacement depending on door trim complexity.

Reason For Most Common Failure

• Impact and Physical Damage: Collisions or knocks while parking are the most frequent causes of mirror breakage or deformation.
• Moisture Ingress and Corrosion: Water penetration can corrode connectors, motor gears or the folding actuator, leading to intermittent or permanent failure.
• Wear of Actuator Gears or Motor: Repeated use and aging can wear the small electric motors or plastic gear teeth inside the folding/adjustment mechanism.
• Wiring And Connector Issues: Bent pins, damaged wiring or poor contacts in the 10-pin plug (6+2+2) cause loss of function for adjustment, folding or the temperature sensor.
• Cosmetic Damage: Painted surfaces are vulnerable to scratches and scuffs; the supplied unit has a slight abrasion on the colored section as noted.

This mirror assembly offers a direct, parts-number oriented replacement for Citroën C8 and Peugeot 807 vehicles, matching original connectivity and functions to shorten workshop time and restore vehicle convenience features quickly.

This left-hand exterior mirror is a direct-fit replacement for Citroën C8 and Peugeot 807 models and is ideal for professional workshops and DIY mechanics who expect reliable electrical folding and adjustment. The unit preserves original mounting points and the 9-pin connector configuration commonly used on these models, making it simple to identify by product numbers 14009348YJ and 8153FS. The mirror housing is finished in Color Code EYJ (Gray Aster) and shows minor paint scuffs typical of a used part.

The mirror provides electric adjustment and power folding to improve parking convenience and reduce damage in tight spaces. The 9-pin (5+2+2) plug supports multiple electrical functions; confirm the pinout against vehicle wiring diagrams when integrating additional features. The assembly is supplied as a complete mirror head for straightforward replacement of the original unit.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C8, Peugeot 807
• Product Codes: 14009348YJ, 8153FS, EYJC
• Additional Numbers: 9-Pin Connector (5+2+2)

Installation Recommendations

• Preparation: Park the vehicle on a level surface, set the ignition off and, if preferred for safety when working near airbags or door electronics, disconnect the negative battery terminal.
• Door Trim Removal: Remove the inner door trim or triangular trim panel carefully to access the mirror mounting bolts and electrical connector. Use trim tools to avoid damaging clips and upholstery.
• Electrical Connector: Unplug the 9-pin connector and inspect pins for corrosion or damage. Clean contacts if necessary before installation.
• Mounting: Support the mirror from the outside while removing the fasteners. Fit the replacement mirror, tighten bolts to the manufacturer’s recommended torque, and reconnect the electrical plug.
• Adjustment and Test: Reconnect the battery (if disconnected) and test all mirror functions—adjustment, power folding and any other electrical features—before reassembling the door trim.
• Finish: If the painted area needs cosmetic attention, use touch-up paint matched to Color Code EYJ and avoid oversanding near seams.

Common Failure Causes

• Impact Damage: Collisions or side-swipe incidents are the most frequent causes of mirror failure—broken housings, cracked glass or damaged folding mechanisms.
• Water Ingress and Corrosion: Moisture entry can corrode electrical contacts and motor components, leading to intermittent operation or complete failure of power functions.
• Wear of Mechanical Components: Gears and pivot joints wear over time, causing noisy or sluggish folding and adjustment.
• Connector And Wiring Issues: Damaged wires, bent pins in the 9-pin plug or poor grounding can produce loss of function; inspect the harness when diagnosing mirror faults.
• Age And Environmental Stress: Long-term exposure to UV, temperature cycles and road debris shortens service life; expected longevity depends on use and conditions but many units show issues after several years of service.

Searchable Product Codes: 14009348YJ, 8153FS, EYJC — these identifiers are often used by repair shops and parts databases to quickly locate the correct replacement mirror for Citroën C8 and Peugeot 807 vehicles.

This right-side electric folding exterior mirror is a practical replacement for Citroën C8 and Peugeot 807 vehicles, aimed at professional mechanics and experienced DIY enthusiasts. The unit combines power adjustment, electric folding and an integrated outside temperature sensor, making it a complete mirror assembly for passenger-side replacement. Commonly searched by product codes 14009349ZR and 8153FV, this mirror suits repairs after impact damage or when electrical components fail.

Technical Information

• Manufacturer: Stellantis
• Model: Citroën C8; Peugeot 807
• Product Codes: 14009349ZR, 8153FV, EZRC
• Additional Numbers: 10-Pin Connector (6+2+2); Passenger Side; External Temperature Sensor

Installation Recommendations

Replacement is straightforward for a trained mechanic or competent DIYer with basic tools. Typical steps:

• Remove the interior door trim or access cover to reach the mirror mounting area.
• Disconnect the electrical connector (10-pin, arranged as 6+2+2) and any sensor wires carefully to avoid damaging terminals.
• Unscrew the mirror mounting bolts/nuts, support the mirror while removing fasteners to prevent dropping or scratching the door.
• Fit the new mirror, hand-tighten fasteners, reconnect the wiring and test adjustment, folding function and temperature sensor before reassembling the trim.
• Use plastic trim tools to avoid damaging panels and verify all functions (adjust motors, folding, heater if present, sensor output) prior to final assembly.

Why This Part Most Commonly Fails

• Impact Damage: Knocks from traffic, parking or road debris frequently crack or misalign the mirror housing or glass.
• Water Ingress And Corrosion: Moisture can corrode connectors, motor gears or sensor contacts, leading to intermittent or total electrical failure.
• Wear In Folding Mechanism: Repeated folding cycles and worn gears or plastic components can cause the folding action to stick or fail.
• Connector And Wiring Damage: Broken wires or damaged pins at the 10-pin connector cause loss of functions such as adjustment or the temperature sensor.
• Cosmetic Wear: Painted surfaces are prone to scratches and scuffs; the listed unit has a slightly scratched colored section.

Expected durability depends largely on exposure and incidents. Under normal conditions the electrical mirror can last the life of the vehicle, but is vulnerable to external impacts and water-related electrical faults that are the most common causes of replacement.

Discover this used left side mirror offering electric control and folding function, perfectly suited for Citroën C8 and Peugeot 807 vehicles. This replacement part enhances your car’s safety and driving comfort with its quick and easy electric adjustment, allowing you to position the mirror without leaving the driver’s seat. The folding feature protects the mirror from damage when parking in tight spaces.

Positioned on the driver’s side, this mirror improves visibility and vehicle control during complex maneuvers or heavy traffic, making it an essential component for both professional mechanics and DIY car enthusiasts. The elegant Sand Beige Sable Bivouac (KDD) paint complements the vehicle’s exterior styling flawlessly.

Technical Information

• Manufacturer: Citroën, Peugeot
• Models: Citroën C8, Peugeot 807
• Product Codes: 14888790ZR, 8153FT
• Additional Codes: KDD

This replacement mirror is ideal for those seeking a dependable and high-quality solution for vehicle restoration or enhancement. Purchase with confidence, ensuring the product codes and vehicle models match the listed specifications to guarantee perfect fit and compatibility.

Technical Information

Manufacturer: Citroën, Peugeot
Model: Citroën C8, Peugeot 807
Product Codes: 14888830ZR, 8153FW KDD
Additional Numbers: KDD – Sand Color Sable Bivouac Paint
Mounting Side: Passenger side

This product boasts a modern design and appearance in Sable Bivouac gray paint, adding both functionality and a stylish element to your vehicle. The electric folding feature allows you to adjust the mirror easily from your seat, which is especially useful when parking in tight spots or driving in heavy traffic.

Installing this side mirror is relatively straightforward and can be completed by any skilled auto mechanic or car repair enthusiast. Handling the replacement yourself saves both time and money compared to visiting an authorized service center.

This high-quality, reliable spare part for Citroën and Peugeot cars is an ideal solution when replacing a damaged or malfunctioning mirror, improving your driving experience and ensuring road safety. Regular inspection and maintenance of your mirrors are important for vehicle safety.

Due to the condition of this used mirror, it is recommended to check the integrity of the connectors and mirror surface before installation to avoid any impact on functionality. Order today and ensure your vehicle is equipped with dependable and fully functional components.

This interior auto-dimming rearview mirror is designed for PEUGEOT 807 and CITROËN C8 vehicles and is identified by product codes 14852480XT and 8153SC. Ideal for professional mechanics and knowledgeable DIYers, the mirror reduces night-time glare from following traffic, improves driver comfort and safety, and restores original equipment functionality. Including the OEM codes in the description increases findability in searches and makes ordering straightforward for workshops and parts departments.

The mirror uses an auto-dimming (electrochromic) system: ambient and rear sensors detect bright light and automatically darken the reflective surface to cut glare. The unit integrates the dimming electronics and vehicle wiring connector for direct replacement on the original windshield mount. Fitment is intended for vehicles equipped from factory with an electrochromic interior mirror; check the vehicle’s existing mirror mount style before ordering to ensure proper installation.

Technical Information

• Manufacturer: Stellantis
• Model: PEUGEOT 807, CITROËN C8
• Product Codes: 14852480XT, 8153SC
• Other Numbers: None Specified

Compatibility And Fitment Notes

Compatible With PEUGEOT 807 And CITROËN C8 Models That Came From Factory With An Auto-Dimming Interior Mirror. Fitment Requires Matching The Windshield Mounting Bracket And Electrical Connector Type. If The Vehicle Has A Different Mirror Mount Or No Auto-Dimming Wiring, Additional Adapters Or Wiring May Be Required.

Installation Recommendations

• Recommended For Installation By Experienced Technicians Or Competent DIYers.
• Before Starting, Disconnect The Battery To Prevent Short Circuits And Avoid Risk To Airbag Systems.
• Common Steps: Remove Interior Trim Around The Mirror Base, Unplug The Electrical Connector, Release The Mirror From The Windshield Bracket (Slide Or Twist Depending On Mount), Fit The Replacement Onto The Bracket And Reconnect The Wiring.
• Use Appropriate Trim Tools To Avoid Damaging Headliner Or Trim. Verify Connector Pins Are Clean And Properly Seated Before Final Assembly.

Why This Part Most Commonly Fails

Auto-Dimming Mirrors Typically Fail Due To Electronic Component Degradation, Moisture Ingress, Corroded Or Damaged Wiring, Impact Or Vibration Damage From Accidents, Or Internal Sensor Malfunction. Symptoms Include Loss Of Dimming Function, Constantly Dark Or Light Mirror, Flickering, Or No Power To The Unit.

Notes For Professionals And DIYers

When Replacing The Mirror, Inspect The Windshield Mounting Plate And Wiring Loom For Damage. Clean Connectors And Apply Dielectric Protection If Needed. After Installation, Confirm Proper Operation Under Night-Time Conditions To Ensure Sensors And Electronics Function Correctly. Keeping The OEM Product Codes (14852480XT / 8153SC) Handy Helps Matching And Ordering The Correct Replacement.

Overview

This left (driver side) electrically adjustable and folding wing mirror is a direct-fit replacement suitable for Citroën C8 and Peugeot 807 models. Finished in Grey Metallic (EZRC – Grey Aluminium paint), the unit carries a 13-pin connector arrangement (6+5+2). The housing shows light paint scratches but the mechanism and plug configuration match OE-style electrical mirrors, making it a practical choice for workshops and DIY mechanics searching by part numbers such as 14888790ZR or 8153FT.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C8, Peugeot 807
• Product Codes: 14888790ZR, 8153FT, EZRC
• Additional Numbers: 13 PIN (6+5+2)
• Application: Left / Driver’s Door

Function And Fitment

The mirror provides electric adjustment and power folding functionality for improved convenience and protection in tight spaces. The 13-pin connector supports the mirror adjustment motor and folding actuator circuits consistent with OE wiring layouts for these models. Verify the connector layout (6+5+2) matches the vehicle harness before installation to ensure full functionality.

How To Replace

1. Remove the interior door trim or triangular trim cover to access the mirror mounting bolts and electrical connector.
2. Disconnect the mirror connector by gently releasing the locking tab; note the 13-pin arrangement for correct reconnection.
3. Unscrew the mirror mounting bolts and support the mirror while lowering it from the door to avoid damaging the paint.
4. Fit the replacement mirror, secure mounting bolts to the manufacturer’s torque specification, and reconnect the electrical plug.
5. Test mirror adjustment and folding operation before reassembling the trim. Reinstall door trim and confirm there are no rattles or misalignments.

Installation Recommendation

Always follow vehicle manufacturer procedures and use the correct trim removal tools to avoid damage. Disconnecting the vehicle battery before handling electrical connectors is recommended to prevent short circuits and accidental activation. Check connector pins for corrosion or damage and ensure the mirror mounting surface is clean and free of deformation for a secure fit.

Why This Part Commonly Fails

Common failure modes for electrically adjustable folding mirrors include worn adjustment motors, fractured folding actuators from impacts, connector corrosion, and paint damage from contact or environmental exposure. Mechanical wear or water ingress into the connector area can cause intermittent operation. Cosmetic issues such as scratched paint are common on used units but do not necessarily affect mechanical or electrical performance.

Notes For Buyers

Searches for this part are often performed by reference numbers 14888790ZR and 8153FT or by vehicle model (Citroën C8 / Peugeot 807). The 13-pin (6+5+2) connector and driver-side designation are key fitment details—verify these match your vehicle’s existing mirror to ensure compatibility.

This left side electrically folding side mirror in gray EYJ is designed specifically for Citroën C8 and Peugeot 807 models. It is an essential replacement part for drivers who need a reliable, functional side mirror that supports electric adjustment and folding features. The mirror mounts directly onto the driveru2019s side and offers the convenience of easy electrical control, improving vehicle safety and comfort.

The side mirror sometimes experiences wear due to everyday use, including minor impacts or environmental exposure. Common issues such as motor failure or glass damage can impair its function, making timely replacement crucial. This particular model comes with a slightly cracked frame, as visible in the last photo, but this does not impair the mirroru2019s operational abilities.

Replacement Tips

Replacing the side mirror requires removing the interior door panel to access mounting screws and electrical connectors safely. Disconnect the electrical wiring carefully before removing the old mirror. Installation involves positioning the new mirror, reconnecting electrical plugs, and securing it firmly with screws. After installation, test the folding function and electric adjustment to ensure correct operation.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C8, Peugeot 807
• Product Codes: 8153FT
• Additional Codes: None specified

This left-hand electric folding mirror is a practical replacement for workshops and DIY enthusiasts working on Citroën C8 and Peugeot 807 vehicles. Designed to restore full electrical adjustment and folding functions, the unit comes in Grey Aluminium (EZR) finish and is suitable for driver-side fitment. The housing shows a minor paint scuff but is fully functional electrically.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C8, Peugeot 807 (Driver Side)
• Product Codes: 8153FS, 14009348ZR
• Additional Numbers: 140093338ZR, EZRC
• Connector: 9 Pin (configured 5+2+2)
• Color: EZR – Grey Aluminium Paint

Features & Function

The mirror provides electric adjustment and electric folding capability for convenient operation from inside the vehicle. The 9-pin connector supports multiple electrical functions required by the original equipment. The painted cover matches vehicles specified with EZR Grey Aluminium exterior trim.

Compatibility

Fits left (driver) side on Citroën C8 and Peugeot 807 models that use a 9-pin mirror connector. Check that your vehicle’s mirror wiring and mounting points match the 9-pin (5+2+2) configuration to ensure direct fitment.

Installation Recommendations

• Recommended Tools: Trim removal tools, Torx/screwdriver set, socket set, and torque wrench.
• Safety: Disconnect the vehicle battery before disconnecting electrical connectors to avoid short circuits or airbag system faults.
• Procedure Overview: Remove interior door trim to access mirror mounting bolts, disconnect the 9-pin connector, unfasten mirror retaining bolts, remove the old mirror, fit the replacement, reconnect the connector, secure bolts to correct torque and test all electrical functions (adjustment, folding, heating if applicable) before reassembling the door trim.
• Time & Skill: Typical replacement time 30–60 minutes depending on familiarity with door trim removal. Suitable for experienced DIY mechanics and professional workshops.

Why This Part Typically Fails

• Impact Damage: Side collisions or knocks are the most common cause of mirror breakage or housing damage.
• Wear Of Electric Mechanisms: Repeated folding and adjustment can wear actuators and motors over time.
• Connector Corrosion Or Wiring Faults: Moisture ingress or wire fatigue at the connector can cause intermittent or complete electrical failure.
• Housing And Paint Damage: Stones, scratches and environmental exposure lead to cosmetic degradation; the listed unit has a slight paint scuff but remains fully functional.

Part numbers included in the listing (8153FS, 14009348ZR, 140093338ZR) are frequently used by mechanics when searching for compatible mirrors for Citroën C8 and Peugeot 807 vehicles, increasing the chance of finding the correct replacement quickly.

The mirror includes a built-in external temperature sensor, enhancing vehicle safety by providing accurate ambient temperature readings displayed on the dashboard. This feature is particularly useful in colder climates for anticipating icy conditions.

Replacements are typically necessary due to impacts, wear of electric folding mechanisms, or damage to the mirror housing. Maintaining fully functional mirrors is crucial for visibility and road safety.

The installation process involves carefully removing the interior door panel on the passenger side to access the mounting screws and electrical connectors. Once disconnected, the new mirror with electrical folding and heating functions can be mounted securely and plugged into the factory wiring harness.

Technical Information

• Manufacturer: PSA (Citroën, Peugeot)
• Model: Citroën C8, Peugeot 807
• Product Codes: 8153FW
• Additional Numbers: EYJ (Gray Aster color)