High-quality left side exterior mirror designed for Citroën C4 first generation vehicles. This electrically operated mirror (EZRC) is a direct-fit replacement part identified by product codes 8149ZT and 1608065480, offering the exact connector layout (5 pins, configured as 3+2) and paint finish (Grey Aluminium) for seamless installation. Ideal for professional technicians and experienced DIYers who need a reliable, OEM-compatible unit that restores full mirror adjustment and appearance after damage or wear.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C4 (First Generation)
• Product Codes: 8149ZT, 1608065480
• Other Numbers: EZRC
• Mounting Position: Left (Driver’s Side)
• Connector: 5-Pin (3+2)
• Operation: Electrically Adjustable
• Color / Finish: Grey Aluminium (EZR Paint)

Installation Recommendations

• Prepare Tools: Trim removal tools, ratchet set, Torx/Phillips as required for door card and mirror fasteners.
• Safety First: Disconnect the vehicle battery before disconnecting electrical connectors to avoid short circuits and protect electronics.
• Access: Remove the interior door trim or triangular trim piece to reach the mirror mounting bolts and electrical connector.
• Disconnect: Unplug the 5-pin connector (noting the 3+2 configuration) and carefully free the wiring from clips.
• Remove/Fit: Unscrew the mirror mounting nuts, remove the old mirror and fit the replacement. Tighten fasteners to manufacturer torque where available and reconnect the electrical plug.
• Function Check: Before reassembling the door trim, reconnect the battery and verify mirror movement and any additional electrical functions.
• Finish: Refit interior trims, ensuring clips and fasteners are secure. If paint match is critical, minor touch-up or respray may be required for exact color blending.

Why This Part Fails

• Impact Damage: The most common cause is external impact (parking knocks, collisions) that cracks the glass or breaks the housing and mounting points.
• Water Ingress and Corrosion: Moisture can enter the mirror housing over time, causing motor failure, connector corrosion, or short circuits.
• Wear of Electric Actuator: Repeated use and age can lead to worn gears or a failed adjustment motor, reducing movement or causing noise.
• Broken Folding Mechanism: Manual or automatic folding joints can wear or break, preventing proper stowage.

Notes

This unit matches original connector and paint code information provided. Fitment is based on the listed product codes and the Citroën C4 first generation specification—verify part numbers if necessary before installation. Designed for technicians and DIYers familiar with door trim removal and electrical connector handling.

This right side exterior mirror is a direct-fit replacement for Citroën C4 first generation vehicles and is commonly searched under product codes 8149ZV and 1608065580. Finished in EZR Gray Aluminium paint, the mirror is electrically adjustable and includes an integrated temperature sensor. Designed for professional garages and competent DIY enthusiasts, this unit restores correct mirror positioning and functionality after damage or electrical failure.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C4 (First Generation) — Right Side / Passenger Door
• Product Codes: 8149ZV, 1608065580, EZRC
• Additional Numbers: Connector 7 Pins (5+2)

Function And Features

The mirror provides side and rear visibility while allowing electronic adjustment from the cabin for safe lane changes and parking. The integrated temperature sensor can be used by vehicle systems (for example climate or mirror-heating logic) and the electrical drive enables precise mirror angle control. The 7-pin connector (5+2) supplies power and signal connections required by the motor, sensor and any additional functions.

Replacement Procedure

Basic Replacement Steps (General Guidance):

• Disconnect Battery Before Work: Disconnect the negative terminal to prevent short circuits when handling electrical connectors.
• Remove Interior Door Trim Or Mirror Cover: Carefully detach the trim panel or triangular cover to access the mirror mounting screws and electrical connector.
• Unplug Connector: Locate and unplug the 7-pin connector (5+2) from the mirror module.
• Remove Mounting Bolts: Unscrew the mirror fixing bolts and remove the old mirror from the door aperture.
• Install New Mirror: Position the replacement mirror, secure the mounting bolts to the manufacturer’s torque specification, connect the wiring harness, and refit the interior trim.
• Function Test: Reconnect the battery and verify electrical adjustment, sensor function and any heating/defrosting feature if applicable.

Installation Recommendations

• Use Appropriate Tools: Torx or hex bits are commonly required for door trim and mirror fasteners — check fastener type before starting.
• Protect Door Trim: Use trim removal tools to avoid breaking clips or scratching interior surfaces.
• Check Connector Condition: Inspect pins and plugs for corrosion or bent contacts and clean if necessary before reassembly.
• Follow Manufacturer Torque And Refit Sequence: Ensure correct bolt torque and clip engagement to avoid wind noise or water ingress.

Why The Part Commonly Fails

Most Failures Are Caused By Impact Damage (Collisions Or Parking Scrapes), Water Ingress Leading To Corrosion Of Connectors Or Motor, And Wear Of The Electric Adjustment Motor After Many Years Of Use. Glass Breakage From Stones Or Vandalism Is Also Frequent. Electrical Faults May Occur From Damaged Wiring Or Moisture Entering The Connector.

Notes On Compatibility

The Part Is Intended For Citroën C4 First Generation Vehicles And Is Frequently Searched By The Codes 8149ZV And 1608065580. Verify That The Connector Type (7 Pins 5+2) And Color Match Your Vehicle When Selecting Replacement Parts.

Recommendation For Professional Service

If The Mirror Contains Additional Functions That Require Calibration Or Integration With Vehicle Systems, Consider Professional Installation. For Typical Mechanical Or Electrical Replacement, An Experienced Technician Or Confident DIYer With Basic Tools Can Perform The Swap Following The Above Steps.

The left side electric folding mirror for the Citroën C4 first series is for the driver’s side. It is a used original part from PSA cars, suitable for repairs after damage to the mirror or when replacing a malfunctioning electric control. Thanks to electric control and electric folding, it is practical for city traffic and narrow garages.

The mirror is designed with a 9 PIN connector (5+2+2). The color of the cover corresponds to the EXL code – Obsidian black lacquer. We recommend that you compare the connector and part numbers with your original mirror before ordering, as they may differ depending on the equipment (eg wiring type).

Technical information:
Manufacturer: PSA Citroën Peugeot
Model: Citroën C4 (1st generation / first series)
Side: Left (Driver)
Control: electrically operated, electrically folding
Connector: 9 PIN (5+2+2)
Color code: EXL
Color: Black Obsidian

Product codes:
96467114
8149ZY

Other numbers:
EXL

Installation recommendations:
– Disconnect the battery before assembly (to reduce the risk of electrical errors and damage to the connectors).
– Check the compatibility of the connector (9 PIN) and the attachment to the original part.
– During installation, pay attention to the correct seating of the wiring in the door, so that it does not get pinched by the edges and does not limit folding.
– After assembly, check the adjustment and folding function and, if necessary, check that the mirror does not rub against the cover or the door.

The reason why the part most often goes wrong:
The most common cause is mechanical damage (contact during parking, impact) and the subsequent cracking of the holder or cover. In the case of electrically folding mirrors, the folding mechanism (gears/motors) often wears out or the wiring in the bend near the door is damaged, which results in non-functioning folding or adjustment.

The left electric folding mirror for Citroën C4 (1st series) is for the driver’s side. This is a used car part from PSA Citroën/Peugeot cars, suitable for both car repair shops and home repairs. The mirror is electrically controlled and electrically foldable at the same time, connected via a 9-pin connector (5+2+2). The paintwork is EZR – Gray Aluminum, so it is suitable for cars in this color specification.

Thanks to the mentioned codes, the part can be easily found even by product number, which speeds up the correct selection when ordering and when looking for a replacement for a damaged mirror.

Technical information:
Manufacturer: PSA Citroën / Peugeot
Model: Citroën C4 (first series)
Location: left side (driver’s side)
Control: electric
Folding: electric
Connector: 9 PIN (5+2+2)
Paint color: EZR – gray aluminum
Product codes: 96467114, 8149ZY
Other numbers: 96467114 / 8149ZY (given according to the PSA marking)

Installation recommendations:
– Disconnect the battery before assembly (you will reduce the risk of a short circuit when handling the connector).
– Check the match of the 9 PIN connector (5+2+2) and the fixing in the door, including the cable grommet.
– When installing the mirror, make sure that the seal fits correctly so that it does not leak into the door and does not create aerodynamic noise.
– After assembly, test the functions: electric adjustment and electric folding (ideally before the door panel is completely clicked).

The reason why the part most often goes wrong:
The most common cause is damage to the folding mechanism or transmissions after an impact (contact with a post, another vehicle, vandalism) or a broken joint during violent tipping. With electric folding mirrors, there are also malfunctions of the folding motor or interruption of the wires in the door passage due to repeated opening and closing.

Upgrade or replace the damaged right side mirror on your Citroën C4 with this direct-fit electrically operated unit. Designed for mechanics and experienced DIY enthusiasts, this mirror restores safe rear visibility and original appearance with factory-matching paint code KTV (Black Perla Nera). The part is commonly referenced by OEM codes 96548383 and 8149ZX, making it easy to find when searching by part number. The unit connects via an 8-pin (6+2) connector to the vehicle wiring harness and is intended for the passenger-side door.

Technical Information

• Manufacturer: Stellantis (Citroën)
• Model: Citroën C4 (Passenger Side)
• Product Codes: 96548383, 8149ZX
• Other Numbers: Color Code KTV (Black Perla Nera); Connector: 8‑pin (6+2)

Key Features & Benefits

• Direct replacement unit suitable for passenger-side of Citroën C4, maintaining original exterior look with KTV paint finish.
• Electric operation for mirror adjustment via the vehicle’s existing controls (connects to original 8‑pin connector).
• Sold under common OEM references (96548383, 8149ZX) for quick identification and ordering.
• Ideal for workshop repairs or competent DIY installation—reduces vehicle downtime and restores safety.

Installation Recommendations

• Disconnect the vehicle battery before starting work to avoid short circuits and to protect electrical systems.
• Remove the interior door trim and the triangular mirror cover to access the mirror mounting bolts and connector.
• Support the mirror while removing mounting bolts to prevent it falling and damaging the paint or wiring.
• Carefully unplug the 8‑pin (6+2) connector; inspect pins and connector for corrosion or bent contacts before installing the new unit.
• Fit the new mirror, tighten mounting bolts to manufacturer torque, reconnect the connector and test adjustment functions before reassembling door trim.
• After installation, verify all mirror functions (adjustment range, folding if applicable, and heating if present) on the vehicle controls.

Most Common Reasons This Part Fails

• Impact Damage: Collisions or knocks are the most frequent cause—broken mirror glass, cracked housing, or bent mounting points.
• Water Ingress And Corrosion: Moisture can corrode connector pins and internal motor contacts, leading to intermittent or total failure of adjustment.
• Wear Of Internal Motor/Actuator: Repeated use over many years can wear the electric adjustment motor or gears.
• Mechanical Failure Of Folding Mechanism: Manual or powered folding joints can seize or break from stress or impact.

This replacement mirror is a practical solution for restoring visibility and vehicle aesthetics. Ensure proper handling during installation and inspect connectors and wiring for damage to prevent repeat failures.

High-quality left (driver side) replacement mirror designed for Citroën C4 models. This electrically operated unit with a 7-pin (5+2) connector covers common functions such as mirror adjustment, heating and electric folding where fitted. Painted in KTV (Black Perla Nera) for a factory-matched finish, it is intended as a direct replacement for vehicles using the listed part codes. The mirror is an ideal choice for workshops and DIY mechanics who need a reliable, ready-to-fit spare that restores original functionality and appearance.

Technical Information

• Manufacturer: Citroën (Stellantis)
• Model: Citroën C4
• Product Codes: 96548384, 8149ZW, KTV
• Other Numbers: 8149.ZW
• Color: KTV – Black Perla Nera
• Connector: 7-pin (5+2)
• Position: Left / Driver’s Door

Installation Recommendations

Follow these steps to ensure a safe and effective replacement:

1. Prepare Tools: Trim removal tools, Torx/screwdrivers as required and electrical cleaner/contact spray.
2. Safety First: Disconnect the negative battery terminal before starting to prevent short circuits or accidental airbag deployment when removing door trims.
3. Remove Interior Door Trim: Carefully detach door card to access the mirror mounting area and electrical connector. Use plastic trim tools to avoid damaging clips and trim.
4. Disconnect Wiring: Unplug the 7-pin connector. Inspect pins and wiring for corrosion or damage before fitting the new mirror.
5. Remove Old Mirror: Unscrew the mounting nuts/bolts and carefully remove the old mirror from the door aperture.
6. Fit New Mirror: Position the replacement mirror, secure mounting hardware to the correct torque, and reconnect the electrical connector. Ensure connector seats fully.
7. Functional Check: Reconnect the battery and verify mirror adjustment, heating and folding (if applicable) before refitting the door trim.
8. Final Assembly: Refit the door card and ensure all clips and screws are secured. Perform a final function test.

Why This Part Fails Most Often

• Impact Damage: Collisions, knocks in car parks or side-swipes are the most frequent causes of broken housings, cracked glass or bent mounting points.
• Water Ingress and Corrosion: Moisture can corrode connector pins or damage the small electric motors and heating elements, leading to intermittent or complete failure.
• Motor/Wiring Wear: Repeated use over time can wear out the adjustment motor or cause wiring fatigue, especially where cables are flexed at the hinge point.
• Electrical Faults: Blown fuses, damaged connectors or poor grounding may cause loss of functions such as heating or motor movement.

Fitment Notes

Ensure the vehicle uses the same connector type and the listed part numbers prior to installation. The 7-pin (5+2) configuration typically supports mirror adjustment, heating and folding functions depending on vehicle equipment level. Test all functions before final assembly of the door trim. For painted mirrors, inspect finish for matching and handle carefully to avoid scratches during fitting.

Additional Advice For Mechanics And DIYers

This mirror is suitable for professional workshops and competent DIY mechanics. Verify functionality immediately after installation to save time on follow-up diagnostics. Keep spare mounting nuts/clips on hand, as these small parts can be damaged during removal on older vehicles.

Featuring the color code KPU – Oriental Blue, this side mirror is a perfect match for your Citroën C4, providing a seamless integration with your car’s design. The electric operation allows for easy adjustment, ensuring that you can achieve the best viewing angle with minimal effort.

It is vital to replace side mirrors promptly, as damaged or malfunctioning mirrors can lead to visibility issues and compromise safety. This side mirror is compatible with various Citroën and Peugeot models, making it a versatile choice for auto mechanics and DIY enthusiasts who need reliable replacement parts.

Technical Information

• Manufacturer: Citroën
• Model: C4
• Product Codes: 96467083
• Other Numbers: 8149YP

This auto-dimming interior mirror is a direct-fit replacement commonly used on Citroën C4 and Peugeot 307 models. Designed for professional garages and DIY mechanics, it reduces glare from following vehicles at night by automatically adjusting the mirror glass tint, improving driving comfort and safety. The part is frequently searched by its reference numbers, so check the product codes listed below when locating the correct unit.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C4; Peugeot 307
• Product Codes: 8149EZ, 8154JX, 8149XG
• Additional Numbers: 8149EZ, 8154JX, 8149XG

Compatibility

• Citroën C4 (selected years and equipment levels)
• Peugeot 307 (selected years and equipment levels)

Installation Recommendations

• Disconnect the vehicle battery before removing the old mirror to prevent short circuits when unplugging the electrical connector.
• Remove interior trim as required to access the mirror mounting point and wiring harness. On most models the mirror is fixed to a windshield bracket with a single screw or a clamp; slide the mirror off the mount after loosening fasteners.
• Connect the electrical plug of the new mirror, seat it onto the windshield bracket and tighten the fixing to the correct torque. Refit trim panels and restore battery connection.
• After installation, verify automatic dimming operation by simulating glare (cover the ambient/light sensor briefly) and check any integrated features such as compass or auto-folding if present.
• Use manufacturer-recommended adhesives or brackets when replacing a mirror glued to the glass; allow adhesive curing time before driving.

Why This Part Fails Most Often

Automatic rear-view mirrors usually fail due to electrical or sensor issues. Common causes include internal electronic component degradation from age or heat, water ingress after windshield seal damage, connector corrosion, or damage caused by impacts (e.g., accidents or improper removal). Adhesive or mounting bracket failure can also cause loose or detached mirrors. Addressing wiring corrosion and ensuring proper mounting during installation will reduce the chance of premature failure.

Practical Notes For Buyers

• Search by part numbers (8149EZ / 8154JX / 8149XG) to speed up finding the correct unit.
• Confirm that the replacement mirror matches any integrated functions your vehicle requires (auto-dimming sensor location, electric features, connectors).
• Professional installation is recommended if the mirror is bonded to the windshield or if airbag/trim disassembly is needed.

Overview

This replacement right-hand exterior mirror is designed for Citroën C4 (first generation). It features an Iridis (KTC) finish and an electric adjustment mechanism with an integrated temperature sensor. The unit uses a 7-pin connector (arranged as 5+2) and fits the passenger-side door. Ideal for professional workshops and experienced DIY mechanics looking for a direct-fit, original-equivalent solution identified by part codes 8149ZV and 1608065580.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C4 First Generation (C4 I)
• Product Codes: 8149ZV, 1608065580
• Other Numbers: Color Code KTC (Iridis); Connector: 7-pin (5+2)
• Side: Right (Passenger)
• Features: Electrically Adjustable, Temperature Sensor (ambient)
• Finish: LAK Iridis (KTC)

Compatible Models

Fits Citroën C4 First Generation (approx. 2004–2010), including standard hatchback variants and facelift models where the 7-pin mirror wiring and KTC Iridis finish apply. Always verify physical connector and mounting points against the vehicle prior to installation.

Function And Purpose

The exterior mirror provides driver visibility on the passenger side with electric adjustment for quick repositioning from inside the cabin. The integrated temperature sensor supplies outside temperature information used by vehicle systems. The 7-pin connector supports the mirror motor and the sensor circuits. The Iridis paint finish ensures a color-matched appearance for vehicles painted in the corresponding KTC code.

Common Failure Reasons

• Impact Damage: Collisions or knocks are the most frequent cause of mirror breakage or housing deformation.
• Water Ingress And Corrosion: Moisture can corrode connectors or motors, causing intermittent or permanent failure.
• Motor Wear: Repeated adjustment over many years can wear the internal adjustment motor or gears.
• Connector Or Wiring Damage: Pin corrosion, bent pins or chafed wiring can interrupt signals to the mirror functions.
• Sensor Failure: Temperature sensor faults may occur due to contamination or wiring issues.

Installation Recommendations

Follow these steps for a safe and reliable replacement. Recommended for professional technicians or experienced DIYers.

1. Always Disconnect The Battery Before Starting Work To Prevent Short Circuits And Protect Vehicle Electronics.
2. Remove The Interior Door Trim Or Mirror Access Panel To Reach The Mirror Mounting Bolts.
3. Carefully Support The Mirror From The Outside While Removing Mounting Nuts To Avoid Dropping Or Damaging The Door Skin.
4. Disconnect The 7-Pin Connector And Inspect Pins For Corrosion Or Damage. Clean Contacts Or Use Dielectric Grease If Appropriate.
5. Fit The New Mirror, Reconnect The Connector, And Tighten Mounting Hardware To Manufacturer Torque Values. Replace Any Damaged Gaskets Or Foam Seals.
6. Reconnect The Battery And Test All Functions: Mirror Adjustment, Temperature Sensor Signal (check instrument cluster/vehicle diagnostics), And Any Additional Features.

After Installation: Verify Smooth Adjustment Across Full Range And Check For Unusual Noise (Indicates Gear Or Motor Issues). If The Vehicle Has Memory Or Advanced Features, Follow Manufacturer Procedures For Function Check Or Calibration.

Why Choose This Part

Direct-fit part codes (8149ZV / 1608065580) and original-equivalent finish (KTC Iridis) make this mirror a practical replacement for workshops and DIY repairs. The integrated temperature sensor and 7-pin connector ensure compatibility with the vehicle’s electrical systems when the connector and mounting match the original equipment.

Description

OEM-quality left side mirror designed for Citroën C4 vehicles. This electrically operated mirror comes painted in KCW (Sand / Sable de Langrune) and features a 7-pin (5+2) electrical connector to support multiple functions. Ideal for professional garages and experienced DIY mechanics looking for a direct-fit replacement. Commonly searched under product codes 96548384 and 8149ZW.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C4
• Product Codes: 96548384, 8149ZW
• Other Numbers: KCW (Color Code)
• Connector: 7-pin (5+2) electrical connector
• Mounting Position: Left / Driver’s Door

Installation Recommendations

• Disconnect the vehicle battery before starting work to prevent short circuits when handling electrical connectors.
• Use plastic trim tools to remove the door card to avoid damage to clips and trim.
• Support the mirror assembly while removing the mounting bolts to prevent it from falling and damaging the glass or paint.
• Carefully unplug the 7-pin connector (5+2) and inspect pins and socket for corrosion or bent contacts; replace connectors if damaged.
• Fit the new mirror, tighten fasteners evenly and avoid over-torquing. Reconnect the electrical connector and test all functions (adjustment, folding, any integrated lighting) before refitting the door trim.
• After installation, verify mirror adjustment range and folding operation. Make final checks with doors closed to ensure wiring is not pinched at the hinge area.

Common Failure Reasons

Side mirrors typically fail due to physical impact (collisions, parking damage) and mechanical wear of the electric motor or folding mechanism over time. Water ingress and corrosion at the connector or inside the mirror housing can cause intermittent or permanent electrical faults. Wiring fatigue frequently occurs where the harness flexes inside the door, especially on vehicles exposed to harsh climates or heavy road salt. Cosmetic damage such as paint chips or fading is usually caused by stone chips, UV exposure, or abrasion.

Notes

Search by OEM numbers 96548384 and 8149ZW and color code KCW to ensure the closest match for paint and connector type. This mirror is intended as a direct replacement for the left (driver) door on Citroën C4 models equipped with a compatible 7-pin connector.