This left-hand exterior mirror is designed for Citroën C3 vehicles and combines electric adjustment with an integrated heating element for faster demisting. Ideal for professional garages and DIY mechanics who look up parts by reference number, this unit replaces the original driver’s side mirror assembly and restores full mirror adjustment and heating functions. Compatibility by part number makes ordering straightforward—searching for 8149RY will help you find the correct replacement quickly.

Technical Information

• Manufacturer: Citroën (Stellantis)
• Model: Citroën C3
• Product Codes: 8149RY
• Additional Numbers: 5-Pin Connector (3+2); NFP
• Side: Left / Driver’S Side
• Functions: Electric Adjustment, Heating

Fitment And Applications

Suitable for Citroën C3 models that use the 8149RY mirror assembly. This part is the driver-side (left) mirror with a 5-pin electrical connector arranged as 3+2 pins and includes the heater circuit. When ordering, use the part code 8149RY to ensure correct fitment for vehicles requiring this specific connector and function set.

Installation Recommendations

• Preparation: Park the vehicle on level ground, set the ignition off and remove the key. For safety when working with electrical connectors, open the bonnet and isolate the negative battery terminal if required by your workshop procedures.
• Removal: Remove the interior trim panel on the door to access the mirror mounting bolts. Carefully disconnect the 5-pin connector (noting alignment) and remove the fixing screws holding the mirror housing.
• Installation: Mount the new mirror, tighten the retaining bolts to secure the assembly, and reconnect the 5-pin electrical plug. Verify that the connector is fully seated and corrosion-free before reassembling the door trim.
• Testing: With the ignition on, check electric adjustment across its full range and verify the heating function (may require a few minutes to feel warm). Also check any integrated indicators or folding mechanism if present.
• Notes: If transferring the mirror glass or cover from the old unit, follow safe removal procedures to avoid breaking the glass or damaging clips.

Why This Part Most Commonly Fails

• Physical Impact: Collisions or knocks are the most frequent cause—broken housings, cracked glass, or damaged folding mechanisms.
• Wear On Actuators: Repeated adjustment and fold cycles can wear the small electric motors or gear trains, leading to sluggish or lost movement.
• Water Ingress And Corrosion: Moisture entering the connector or mirror body can corrode pins and contacts, causing intermittent or permanent electrical failure (heater or adjustment).
• Wiring Fatigue: Cable harnesses routed through the door hinge area can chafe and break over time, producing loss of function or short circuits.
• Heating Element Failure: The demist/heating element can fail due to electrical faults or corrosion, reducing visibility in cold or wet conditions.

Replacing a faulty mirror with a correct 8149RY unit restores safety and functionality—electric adjustment and heating are important for visibility and convenience. For mechanics and DIYers, using the exact part code and checking connector pin condition during installation reduces the chance of rework.

Replacement right‑hand exterior mirror assembly designed for Citroën C3 models. This electrically adjustable, non‑heated passenger side mirror includes an ambient temperature sensor and a 5‑pin connector. It is an ideal spare part for workshops and DIY mechanics searching by part number (8149RW) who need a direct‑fit unit to restore mirror adjustment functions after damage or failure.

Key Features

– Electrically adjustable mirror motor for remote tilt and angle setting.
– Non‑heated glass (no heating element) but fitted with an ambient temperature sensor.
– 5‑pin electrical connector for direct replacement on compatible door harnesses.
– Designed for the passenger (right) door; OEM fitment for Citroën C3 applications with matching connector.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model(s): Citroën C3 (Passenger Side – vehicles equipped with 5‑pin mirror connector)
• Product Codes: 8149RW
• Other Numbers: Connector: 5‑Pin; Function: Electrically Adjustable, Non‑Heated, Ambient Temperature Sensor

Installation Recommendations

Before starting work always disconnect the vehicle battery and follow the vehicle manufacturer’s safety procedures. Typical replacement steps:

• Remove the interior door trim or the small mirror access panel to reach the mirror mounting bolts.
• Unscrew the mirror retaining bolts and carefully support the mirror to avoid dropping it.
• Disconnect the 5‑pin electrical connector from the mirror harness.
• Transfer any original trim plates or covers (if required) and fit the new mirror assembly to the door, tightening bolts to the manufacturer’s torque specifications.
• Reconnect the connector and the battery, then verify mirror adjustment functions and temperature sensor readout (if available in instrument cluster).

Use soft trim tools to avoid damaging door panels. If the original mirror has additional features (folding motor, memory) verify compatibility before installation. For safe handling, place the mirror on a soft surface to prevent scratching the glass.

Why The Part Commonly Fails

Exterior mirrors most often fail due to:

• Impact Damage: Collisions, parking impacts or folding into obstacles are the most frequent causes of broken housings, cracked glass or damaged adjustment motors.
• Water Ingress And Corrosion: Seals or connector corrosion can cause erratic adjustment or electrical failures, particularly in older cars or after repeated exposure to moisture.
• Motor Or Gear Wear: Repeated use over many years can wear the small adjustment motors and gears, leading to sluggish or non‑functional adjustment.
• Electrical Connector Issues: Bent pins or damaged wiring in the 5‑pin connector can interrupt power or signal to the mirror and sensor.

Practical Tips For Workshops And DIY Mechanics

• Search By Part Number: Many technicians and customers look up mirrors using the code 8149RW — including this reference in your order speeds identification.
• Test Before Final Assembly: After connecting the new mirror and before reassembling the door trim, test all adjustment directions and check the ambient temperature reading where applicable.
• Preserve Original Fasteners: If the original mounting hardware is undamaged, reuse it for correct fit and alignment; replace any stripped screws or cracked clips.

Compatibility And Fitment Notes

This mirror is intended for Citroën C3 passenger side doors that accept a 5‑pin electrically adjustable, non‑heated unit with an integrated temperature sensor. Fitment depends on the vehicle equipment level and connector type — confirm visual match of the connector and mounting points before installation.

This replacement right (passenger-side) mirror is designed for Citroën C3 vehicles and combines electrically adjustable positioning with an integrated heating element and a temperature sensor. Ideal for professional workshops and DIY mechanics, the unit restores mirror adjustment, defogging and temperature sensing functions after damage or failure. The part is commonly searched by part number 8149RW and is compatible with Stellantis Citroën/Peugeot equipment standards.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C3
• Product Codes: 8149RW
• Other Numbers: Refer To Vehicle Parts Label Or Service Documentation

Key Functions And Benefits

Electric Adjustment: Allows precise remote positioning of the mirror glass to improve driver visibility without manual intervention.
Heated Mirror: Integrated heating element clears condensation and light ice quickly, improving safety in cold or wet conditions.
Temperature Sensor: Built-in sensor provides ambient temperature feedback for vehicle systems that use exterior temperature data.

Installation Recommendations

• Safety First: Disconnect the negative battery terminal before starting to avoid short circuits and accidental airbag deployment where applicable.
• Interior Trim Removal: Carefully remove the door trim or triangular trim cover to access the mirror mounting screws and electrical connector. Use appropriate trim tools to avoid damage.
• Unplug Connector: Detach the 7-pin (5+2) electrical connector. Inspect pins for corrosion or damage and clean if necessary.
• Remove Mounting Fasteners: Support the mirror while removing the retaining bolts or nuts to prevent the mirror from falling and damaging the door paint.
• Fit New Mirror: Align the new mirror, tighten fasteners to the manufacturer torque specification, reconnect the electrical connector, and reassemble trim panels.
• Function Check: Reconnect the battery and verify electric adjustment, heating operation, and temperature sensor response. Adjust mirror position and confirm secure fit and sealing against the door to prevent water ingress.

Why This Part Commonly Fails

• Impact Damage: Collisions or knocks from other vehicles, posts or garage doors are the most frequent cause of mirror breakage.
• Water Ingress And Corrosion: Moisture entering the connector or actuator area can corrode contacts or compromise the motor and heating element over time.
• Wear Of Internal Actuator: Repeated use can eventually wear out the adjustment motor or gears, leading to sluggish or lost movement.
• Electrical Faults: Damaged wiring, connector pin damage, or blown fuses can disable the electric adjustment or heating function.

Selecting a direct-fit replacement with the correct part code (8149RW) reduces installation time and ensures compatibility with vehicle electronics. For best results, check connectors and mounting points during installation and test all mirror functions before returning the vehicle to service.

Replace a worn or damaged left side mirror on your Citroën C3 with this genuine OEM electric mirror (8149FJ). Designed for professional garages and competent DIY mechanics, this unit delivers exact fitment, dependable electric adjustment and straightforward installation. The non-heated design makes it ideal for models that do not feature mirror heating, while the 3-pin connector ensures compatibility with the standard mirror motor wiring harness found on the specified C3 variants.

Key Features

• OEM Quality: Direct-fit original equipment part for accurate replacement and factory alignment.
• Electric Adjustment: Built-in electric motor for mirror position control from the driver’s controls.
• Non-Heated Glass: No heating element included; suitable for vehicles without mirror heating function.
• 3-Pin Connector: Standard 3-pin electrical connector for motor operation and signal feed.
• Ready For Installation: Mirror assembly includes housing, motor and glass (as per original specification).

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C3
• Product Codes: 8149FJ
• Additional Numbers: 8149FJ (OEM Reference)

Compatibility

Intended For Citroën C3 models that use a left-side electrically adjustable, non-heated mirror with a 3-pin connector. Always match the part code 8149FJ with the original part number on the vehicle to confirm fitment before installation.

Function And Typical Failure Modes

The exterior rear-view mirror provides adjustable field-of-view for the driver, housing the electric adjustment motor and mirror glass. Common reasons for replacement include:

• Impact Damage: Collisions, parking knocks or stones can crack the glass or break the housing.
• Motor Wear Or Seizure: Electric actuator failure due to wear, heavy use or contamination.
• Water Ingress And Corrosion: Moisture penetrating the housing or connector causing electrical faults or corroded contacts.
• Broken Folding Mechanism: Mechanical stress or plastic fatigue can prevent proper folding.
• Connector Or Wiring Faults: Damaged wires, bent pins or corroded connectors leading to intermittent or total loss of adjustment.

Typical Service Life: Varies with usage and environment; under normal conditions components may last several years, but exposure to salt, moisture or frequent impacts will shorten service life.

Installation Recommendations

Follow these guidelines to ensure reliable installation and function:

• Preparation: Confirm part code 8149FJ and that the vehicle requires a non-heated, 3-pin left mirror before starting work.
• Safety: Disconnect the negative battery terminal if required by the vehicle manufacturer’s repair procedures before accessing electrical connectors.
• Removal: Carefully release the interior trim and retainers to access the mirror mounting bolts and electrical connector. Avoid forcing plastic clips to prevent breakage.
• Connection: Disconnect the 3-pin connector and remove the old assembly. Connect the new mirror ensuring pins are straight and fully engaged; secure the mirror to the door with the specified fasteners and torque settings.
• Adjustment And Check: Reconnect power, verify full range of electric adjustment from the switch and test folding function (if applicable). Check alignment and tighten fasteners after initial road test.
• Seal And Protect: Ensure seals and gaskets are correctly seated to prevent water ingress. Apply dielectric grease to connector pins if corrosion risk is high.

Why This Part Fails Most Often

External position and exposure make mirrors vulnerable. The most frequent causes of failure are physical impacts (causing broken glass or housings), moisture ingress leading to electrical faults, and wear of the small electric motor or folding mechanism. Preventive care—avoiding impacts, keeping seals intact and protecting connectors from moisture—extends service life.

High-quality interior rearview mirror designed for direct replacement on Citroën and Peugeot vehicles. This mirror, commonly searched under part number 8149NA, restores clear rear visibility and maintains the original interior appearance. It is suitable for professional workshops and skilled DIY enthusiasts who perform routine interior replacements. The mirror comes in color code FBJ – LAMA to match original upholstery and trim finishes.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C2, Citroën C3, Citroën C4, Peugeot 307, Peugeot 1007
• Product Codes: 8149NA
• Additional Numbers: Color Code FBJ – LAMA

Function And Description

The interior rearview mirror provides the driver with a clear central view of the traffic behind the vehicle. Depending on vehicle equipment, the mirror may be a simple manual unit or include integrated features such as auto-dimming, ambient lighting, or housing for sensors. This listed unit is supplied to match original mounting points and interior color.

Replacement Procedure

• Prepare The Vehicle: Park on a level surface and engage the parking brake. If The Mirror Has Electrical Connections (e.g., Auto-Dim Or Lighting), Disconnect The Battery Before Starting.
• Remove Trim: Carefully remove any overhead trim or plastic cover hiding the mirror mount to avoid damaging clips.
• Release Mirror From Mount: Depending On Mount Type, Slide The Mirror Off The Bracket Or Unscrew Fasteners. For Windshield-Mounted Mirrors With Adhesive Pads, Carefully Follow The Manufacturer Procedure To Remove The Adhesive Pad Without Damaging The Glass.
• Install New Mirror: Position The New Mirror On The Mount, Reconnect Any Electrical Connectors, And Secure Clips Or Screws Firmly. Replace Trim And Reconnect The Battery If Disconnected.
• Functional Check: Verify Mirror Position, Stability And Any Electrical Functions (Auto-Dim, Lights) Before Completing The Job.

Installation Recommendations

• Use Appropriate Tools: Plastic trim tools protect interior panels and clips during removal.
• Follow Manufacturer Procedures: For Windshield Adhesive Mounts Use Approved Adhesive Kits If The Mounting Pad Is Replaced.
• Handle Electrical Connectors With Care: Ensure Connectors Are Clean And Fully Engaged; Reconnect The Battery Only After All Connections Are Secure.
• Check Alignment: Adjust Mirror Position For Optimal Rear Visibility And Ensure Mounting Is Rigid To Prevent Vibration.

Why This Part Fails Most Often

• Impact Damage: Road Debris Or Minor Collisions Can Crack The Glass Or Break The Mount.
• Mounting Failure: Plastic Clips Or Adhesive Pads Can Degrade Over Time, Causing The Mirror To Loosen Or Fall Off.
• Moisture Ingress: For Mirrors With Electrical Components, Water Penetration Can Cause Malfunctions Or Short Circuits.
• Wear And Tear: Frequent Adjustments And Vibrations Can Cause Internal Mechanisms To Loosen, Leading To Unstable Mirror Position.

Often searched by part number 8149NA. Order this direct-fit interior mirror to restore factory appearance and safe rear visibility.

Are you looking for an original interior rearview mirror for Citroën or Peugeot with code 8149FF? We offer a used, fully functional OEM PSA part that fits perfectly and maintains the original interior appearance. This part is NFP (No Further Production) – new is no longer produced, so a quality used original is the best choice.

Key benefits
– Original PSA part: exact fit, no vibrations, original appearance
– Day/night version: convenient manual switching against glare
– Color FBJ – LAMA: light gray shade for matching interiors
– A cost-effective and proven alternative to a new part (NFP)

Technical information
– OE/PSA number: 8149FF (also listed as 8149.FF, 8149 FF)
– Design: internal rear-view mirror, mechanical day/night switching
– Colour/interior: FBJ – LAMA (light grey)
– Mounting: on a foot glued to the windshield (PSA standard); assembly by sliding/turning into the lock
– Electrical equipment: without electrochrome (without automatic dimming), without connector; does not serve as a rain/light sensor holder
– Package contents: mirror with foot mount; the glued foot is part of the windshield, not part of the part

Compatibility
– Citroën: C2, C3, C4 (selected versions and equipment)
– Peugeot: 1007, 307 (I)
Note: Different equipment may have a different design of the mirror (e.g. electrochromic). To be sure, check the match against part number 8149FF or VIN.

Condition and origin
– Used original PSA part, functionally tested
– Normal cosmetic signs of use possible; the condition corresponds to the photos in the product detail

Assembly tip
– When removing/installing, do not handle the metal/glued foot on the glass to avoid damaging the windshield.
– The mirror is placed on the foot and locked by clicking/turning. Assembly is a matter of minutes, without the need for electrical connections.

Frequently searched terms (SEO)
– interior mirror Citroën C2 C3 C4
– interior mirror Peugeot 307 1007
– interior/central day/night mirror
– original mirror PSA 8149FF, 8149.FF, FBJ LAMA, NFP

Not sure about compatibility? Email us the part number 8149FF or VIN – we’ll be happy to verify the correctness for free.

This right side mirror is specifically designed for the Citroën C3 and offers advanced features such as electric folding, heating, and an integrated temperature sensor. Its functionality ensures improved visibility and comfort during driving, especially in adverse weather conditions.

Technical Information

• Manufacturer: Citroën (Original Equipment Manufacturer)
• Model: Citroën C3
• Product Codes: 8149FP
• Additional Numbers: 9 wires configuration (5+4 wiring)

Features and Benefits

The mirror is electrically operated with a folding mechanism, allowing convenient adjustment and protection from damage when parked. The heating function prevents fogging and ice formation for a clear view in cold climates. The temperature sensor supports vehicle systems for better climate control and safety.

Installation and Maintenance

Installation requires disconnecting the factory mirror from the passenger side of the Citroën C3. The 9-wire harness should be connected carefully to maintain heating and sensor functionality. Typically, side mirrors may require replacement due to physical damage or electrical failures in the folding or heating components. Regular inspections help ensure optimal operation and extend the lifespan of the part.

Suitable Models

Compatible primarily with Citroën C3 hatchback models where the original mirror part number 8149FP is specified. Always verify the part number compatibility with the vehicle VIN or manufacturer catalog before purchase.

Looking for a reliable and fully functional left side mirror for your Citroën C3? Our original Citroën left electric folding mirror not only enhances the vehicle’s appearance but also significantly improves driving safety. It features electric adjustment and heating, allowing quick and easy mirror positioning in any weather or situation. The folding function lets you fold the mirror inward to navigate tight parking spots or narrow streets with ease.

Technical Information

• Manufacturer: Citroën
• Model: C3
• Product Codes: 8149FN
• Additional Numbers: 7 Wires (4+3 Configuration)

This automotive part is designed specifically for Citroën C3 models, ensuring perfect compatibility and straightforward installation. Using genuine Citroën components guarantees that your vehicle will operate smoothly and maintain its value. The part fits the left side of the vehicle and includes specialized wiring for easy control and mounting, making it the ideal choice to replace damaged or malfunctioning mirrors.

Whether you are a professional mechanic or a car enthusiast performing repairs at home, this mirror offers the necessary performance and reliability for your automotive needs. No compromises are needed when relying on the quality and expertise delivered directly from the Citroën manufacturer.

Crafted from high-quality materials and with careful workmanship, this mirror will serve you for many years, contributing to safer driving experiences. Choose the best for your vehicle – choose the original Citroën mirror for the C3 model!

As a crucial component for maintaining good sightlines, the right side mirror is essential for safe driving. The electric operation ensures quick adjustments, minimizing distractions while driving. This part is specifically designed for the passenger side, meeting the demands of both professional mechanics and car enthusiasts who handle their own repairs.

This electric side mirror is compatible with a variety of Citroën C3 models. Over time, mirrors may suffer damage due to accidents or wear and tear, necessitating replacement to ensure safety and functionality. Installing a new mirror can improve the aesthetics of your vehicle while providing peace of mind.

Technical Information

• Manufacturer: Citroën
• Model: C3
• Product Codes: 8149FK
• Other Numbers: N/A