This painted left exterior mirror is a direct-fit replacement designed for Citroën C1 and Peugeot 107 models. Supplied in Lipizzan White (KWD), the assembly restores original appearance and function for door-mounted mirrors. Ideal for professional workshops and DIY mechanics who look up parts by OEM numbers, the unit matches factory fitment and mounting points to simplify installation.

Key Features

– Direct-fit left (driver) side door mirror assembly for Citroën C1 / Peugeot 107.
– Painted Finish: Lipizzan White (KWD) — ready to install without additional painting.
– OEM Reference Numbers Included For Easy Identification And Search.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1, Peugeot 107
• Product Codes: 87940-0H010, 87940-0H011
• Additional Numbers: 8153YW, 815290, KWD

Installation Recommendations

Replacement is straightforward for anyone with basic workshop tools. Typical steps:

• Remove the interior triangular trim on the door to access the mirror mounting nuts — use a trim tool to avoid damage.
• Support the mirror from outside, then remove the retaining nuts/bolts securing the mirror to the door.
• Carefully disconnect the electrical connector if the mirror has power adjustment/heating. If unsure, isolate the battery before working on electrical connections to prevent short circuits.
• Fit the new mirror assembly, reconnect the wiring harness, and tighten the mounting nuts to the manufacturer’s specified torque. Replace trim and confirm mirror adjustment and any electrical functions operate correctly.

Recommended Tools: Trim panel tool, socket set or Torx depending on vehicle variant, and a torque wrench for final tightening. Take care not to overtighten plastic studs to avoid cracking the mirror base or door skin.

Why This Part Fails Most Often

Door mirrors typically fail due to external mechanical damage (side impacts, parking collisions) or gradual wear of the internal adjustment motor/gear. Other common causes include water ingress and corrosion of electrical connectors on powered mirrors, or paint and housing deterioration from prolonged exposure to the elements. In many cases the glass can crack from impacts while the housing may split or the mount break during minor collisions.

Fitment Notes

Designed For Driver Side (Left) Fitment. Confirm The Correct OEM Number When Searching Or Ordering To Ensure Exact Match With Your Vehicle Variant. The Listed Product Codes Are Commonly Used References For These Models.

This right-hand exterior mirror is a direct-fit replacement designed for Citroën C1 and Peugeot 107 models. Built to match the original geometry and mounting points, it restores proper rearward visibility and vehicle aesthetics after damage or wear. The unit is finished in KWD Lipizan White paint for an OEM-matched appearance and is suitable for professional workshops and experienced DIY enthusiasts who perform exterior body and trim repairs.

Function And Fitment

The mirror assembly provides adjustable reflective surface and, depending on original specification, may include electric adjustment and integrated heating. It mounts to the passenger-side door using the factory bracket and connector locations for a secure, vibration-free fit. Replacement is ideal after impact damage, cracked glass, failed adjustment motors, or severely scuffed housings.

How To Replace

• Prepare: Park on a level surface and engage the parking brake. For safety when working near electrical connectors, switch ignition off.
• Remove Interior Trim: Pry off the small triangular trim panel on the inside of the door to expose the mirror mounting bolts and electrical connector.
• Disconnect Connector: Carefully unplug the mirror electrical connector (if present) and release any clips.
• Remove Fasteners: Unscrew the mirror mounting bolts and support the mirror to prevent it falling free.
• Install New Mirror: Position the new mirror, hand-thread the bolts, then tighten to secure. Reconnect the electrical connector and test all functions (adjustment, folding, heating if fitted).
• Reassemble: Replace the interior trim panel and verify there are no rattles or alignment issues. Adjust mirror position from inside the vehicle.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C1; Peugeot 107 (Passenger Side)
• Product Codes: 87910-0H010, 87910-0H011
• Additional Numbers: 8153YS, 815289, 8151HW, KWD

Installation Recommendations

Use suitable trim tools to avoid damaging interior panels. Ensure connector pins are clean and undamaged before assembly. Tighten mounting bolts evenly and avoid overtightening plastic components. After installation, test mirror adjustment, heating, and folding functions (if equipped) to confirm correct operation. If the original mirror included electrical features, verify connector compatibility before final reassembly.

Why This Part Fails

Exterior mirrors most commonly fail due to: impact collisions (parking knocks, side swipes), water ingress causing motor or heater failure, mechanical wear of adjustment gears, or cracked/broken glass from road debris. Cosmetic deterioration from sun and weather can also necessitate replacement despite full functionality.

For mechanics and competent DIYers, this replacement offers a reliable way to restore safety and appearance quickly, using standard hand tools and basic electrical checks. Keywords for search: Citroën C1 Right Mirror, Peugeot 107 Passenger Mirror, 87910-0H010, 87910-0H011, Lipizan White Mirror.

This right-hand exterior mirror is a direct-fit replacement for Citroën C1 and Peugeot 107 models, finished in ELX Electra Blue paint to match the original body colour. Ideal for workshops and DIY enthusiasts, the part is commonly searched by OE numbers (e.g. 87910-0H011, 8153YS) and designed to restore original appearance and function on the passenger side.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C1, Peugeot 107
• Product Codes: 87910-0H011, 8153YS, 87910-011
• Additional Numbers: 8153.YS

Installation Recommendations

Follow these practical steps to replace the mirror safely and reliably:

• Park the vehicle on a level surface and disconnect the negative battery terminal to reduce the risk of short circuits when handling electrical connectors.
• Remove the interior door trim or triangular trim cover to access the mirror retaining bolts and electrical connector. Use trim tools to avoid damage to clips and panels.
• Disconnect the mirror electrical connector (if present) and remove the retaining nuts/bolts securing the mirror to the door.
• Fit the replacement mirror, loosely start the fasteners, reconnect the electrical plug and verify all mirror functions (adjustment, heating, folding) before fully torquing the fasteners to manufacturer specification.
• Reinstall trim panels and perform a final check of mechanical fit, mirror adjustment range and painted surface for correct colour match.
• If the mirror has electric folding, heating or integrated indicators, check connections for corrosion and secure routing of wiring during installation.

Most Common Failure Causes

• Impact Damage: Side collisions or scraping against obstacles are the most frequent causes of complete mirror breakage or cracked glass.
• Actuator or Motor Faults: Electric adjustment motors can wear out over time or fail due to ingress of moisture or dirt.
• Connector Corrosion and Wiring Damage: Moisture ingress and damaged wiring harnesses lead to intermittent or complete loss of electrical functions.
• Mechanical Fatigue: Hinges and folding mechanisms may weaken, causing looseness or failure to hold position.
• Paint Wear: Exposure to weather and chemicals can cause the painted surface to fade or peel, making replacement necessary for aesthetic reasons.

Selecting the correct OE code (e.g. 87910-0H011 / 8153YS) ensures a proper fit and finish. For professional-looking results, verify mirror functions before final reassembly and follow vehicle manufacturer guidance when available.

This OEM-compatible right side mirror is designed for Citroën C1 and Peugeot 107 models and features a factory-matched painted cover in Gallium Grey (KTB). Ideal for professional workshops and DIY mechanics, the mirror restores original appearance and functionality after damage or wear. Commonly searched by part numbers 87910-0H010, 8149XY and 8153YS, this unit helps you find the correct replacement quickly.

Application And Benefits

Fits Citroën C1 and Peugeot 107 passenger side (right). The painted cap ensures color match with factory finish, improving the car’s visual integrity after repairs. The mirror assembly is supplied ready for installation and is suitable for vehicles that originally came with a painted exterior mirror on the passenger side.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1, Peugeot 107
• Product Codes: 87910-0H010, 8149XY, 8153YS
• Additional Numbers: KTB (Paint Code – Gallium Grey)

Installation Recommendations

Remove the interior triangular trim on the passenger door to access the mirror mounting nuts. Support the mirror from the outside while removing the retaining fasteners to prevent it from falling. Disconnect the electrical connector if present, then remove the old unit and fit the new mirror in reverse order. Make sure the connector is fully seated and that the mirror is aligned before tightening. Tighten fasteners to the manufacturer’s recommended specification and verify all mirror functions (adjustment, folding, heating if equipped) before finishing. Use protective covers to avoid scratching door trim and work with the window up to prevent damage.

Most Common Failure Reasons

Exterior mirrors on compact city cars like the C1 and 107 most often fail due to impact damage from bumps or collisions, broken glass, or mechanical wear in the folding and adjustment mechanisms. Electrical faults can arise from water ingress into the motor or connector corrosion. Regular minor knocks, urban parking incidents, and exposure to road salt are the typical causes that necessitate replacement.

Practical Notes For Mechanics And DIYers

Keep the original fastening hardware and foam seals if they remain undamaged, or replace them to ensure correct fit and to prevent wind noise. When replacing a painted mirror, check the paint code (KTB) before ordering to ensure a perfect color match. Use the listed product codes (87910-0H010, 8149XY, 8153YS) to confirm fitment with vehicle repair records or parts catalogs.

Why Choose This Mirror

This mirror offers a precise fit for Citroën C1 and Peugeot 107 passenger side applications with a factory-style painted finish in Gallium Grey (KTB). Clear part numbering and OEM-level compatibility make it straightforward for technicians and home mechanics to locate and install the correct replacement quickly, restoring both appearance and function.

This left exterior mirror is a direct-fit replacement for Citroën C1 and Peugeot 107 models finished in KTB Gallium gray paint. Designed for mechanics and DIY enthusiasts, the unit restores lateral visibility and vehicle appearance after impact or paint damage. The painted cover matches factory KTB Gallium Gray and the assembly fits the driver side (left) mounting points used on original equipment.

Key Features And Benefits

– Direct replacement designed to match factory mounting and finish, helping to simplify installation and maintain vehicle aesthetics.
– Painted KTB Gallium Gray cover for consistent color match on vehicles finished in this factory shade.
– Suitable for routine collision repair, bodywork restoration or cosmetic replacement on Citroën C1 and Peugeot 107.

How To Replace

Replacement is straightforward for experienced technicians and competent DIYers. Typical steps:

• Remove interior door trim panel or access cover to reach mirror mounting screws and electrical connector.
• Disconnect any electrical connector if present (mirror adjustment/heating). If connector is present, label wiring to ensure correct reconnection.
• Unscrew the mirror retaining nuts/bolts and remove the old assembly from the door.
• Fit the new mirror assembly, secure the retaining nuts/bolts to specified torque, reconnect any electrical connector and check adjustment.
• Reinstall the interior trim and verify proper operation and paint match.

Mounting Recommendations

– Work On A Stable Surface With The Vehicle Parked And Handbrake Engaged.
– If The Mirror Contains Electrical Components, Disconnect The Battery Before Starting Work To Avoid Short Circuits And Accidental Deployment Of Safety Systems.
– Use Correct Torque For Mounting Fasteners To Avoid Damage To Mirror Housing Or Door Sheet Metal.
– Check Door Trim Clips During Reassembly And Replace Any Broken Clips To Prevent Rattles.

Most Common Failure Causes

– Impact Damage From Minor Collisions Or Parking Incidents Causing Broken Housing Or Detached Mirror Glass.
– Mechanical Wear Or Breakage Of Internal Pivot Or Folding Mechanism After Repeated Use Or Forceful Folding.
– Paint Damaged By Road Debris Or Corrosion On Older Vehicles Leading To Cosmetic Degradation.
– Electrical Connector Corrosion Or Wire Damage (On Equipped Versions) Causing Intermittent Adjustment Or Heating Failure.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1 / Peugeot 107
• Product Codes: 87940-0H010
• Other Numbers: 8149YE, 8153YW, 815290, KTB (Color Code)
• Color: KTB – Gallium Gray (Painted Cover)
• Side: Left / Driver’s Side

Notes For Buyers

Confirm that the vehicle uses the same mounting pattern and paint code when ordering. Depending on factory equipment level, the mirror may be a simple manual-adjust type or include electrical adjustment/heating—verify fitment and connector type before installation. This listing is focused on compatibility with Citroën C1 and Peugeot 107 models and includes the common OEM reference numbers to assist in finding the correct part (e.g., 87940-0H010, 8149YE).

This interior rear-view mirror (OEM reference 814842 / 8143GP) is a direct-fit replacement for a range of Citroën and Peugeot small cars and light commercial vehicles. Designed for easy installation and reliable day-to-day use, it restores clear rear visibility and original mounting geometry — important for safety and driver comfort. Frequently searched by part numbers 814842 and 8143GP, this mirror is suitable for professional workshops and competent DIY enthusiasts looking for a cost-effective OEM-compatible solution.

Technical information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Interior Rear-View Mirror
• Product Codes: 814842, 8143GP
• Additional Numbers: 8143GP | 814842

Compatibility

Compatible with a range of models (check vehicle equipment level): Citroën C1; Citroën Berlingo (generations I & II); Peugeot 107; Peugeot 206; Peugeot Partner (generations I & II). Confirm fitment by matching the part number 814842 / 8143GP with the vehicle’s original part listing.

Function And Common Equipment Variants

The mirror provides the primary interior rearward view and a secure mounting point on the windshield or overhead bracket. Depending on vehicle trim it may be a simple manual mirror or part of an assembly that includes features such as an anti-dazzle coating (manual or automatic), integrated microphone, or ambient sensors. This product is supplied as the interior mirror unit and is intended to match the original mounting style and geometry.

Replacement Procedure

Typical replacement steps for experienced mechanics or competent DIYers:

• Park the vehicle on level ground and ensure the ignition is off.
• If the mirror has electrical connectors (auto-dim, microphone, lighting), disconnect the negative battery terminal before removing the mirror to avoid short circuits.
• Remove any plastic trim or cover concealing the mirror base. For windshield-mounted mirrors, release the retaining clip or slide off the mirror from the mounting button. For bracket-mounted mirrors, remove the fixing screw(s) and unplug any connectors.
• Fit the new mirror onto the original mounting button or bracket. Ensure the clamp or screw is tightened to the manufacturer’s torque specification and that the mirror is properly aligned.
• Reconnect electrical connectors, restore battery connection if disconnected, and test all functions (manual/auto-dim, microphone, lights) before refitting trim.

Installation Recommendations

• Use OEM-style mounting hardware and avoid over-tightening to prevent damage to the mirror base or windshield button.
• If the mirror attaches to an adhesive button on the glass, inspect the button and windshield surface; replace the adhesive pad or button if damaged. For adhesive-mounted systems, perform installation at moderate temperatures to ensure proper bonding.
• If the unit has electrical features, verify connector seating and wiring integrity. After installation, confirm functionality (mirror adjustment, auto-dim if present, integrated microphone) before returning the vehicle to service.
• When in doubt about integrated sensors or complex assemblies, follow the vehicle manufacturer’s service manual procedures.

Reason Why The Part Most Commonly Fails

Interior mirrors typically fail due to mechanical damage from impact (e.g., collisions, objects striking the windshield area), broken or fatigued mounting clips, or deterioration of the adhesive bond on windshield-mounted buttons. Electrical variants can lose function because of connector corrosion, wiring damage, or internal component failure in auto-dimming modules. Normal wear does not usually mandate scheduled replacement — most faults are caused by external damage or failed ancillary components.

Suitable For Both Professional Workshops And Experienced DIYers. Part numbers 814842 and 8143GP are commonly used to locate the correct replacement quickly.

Product Overview

Replacement right (passenger side) exterior mirror for Citroën C1 and Peugeot 107. Supplied in red with visible fading on the painted cover as shown in the photos. Suitable for mechanics and DIY enthusiasts who need a direct-fit replacement part referenced by OE product numbers.

Key Benefits

• Direct fit for Citroën C1 and Peugeot 107 — simplifies installation and reduces workshop time.
• Includes painted mirror housing (note: paint is faded as pictured).
• Part numbers printed in the listing to help fast identification and search by code.

Compatibility / Models

Fits Passenger Side (Right) of the following models:

• Citroën C1
• Peugeot 107

How It Works And Typical Faults

The exterior mirror provides the driver with a lateral rear view and, depending on vehicle specification, may include an electric adjustment motor and/or heated glass. Common causes of mirror failure or replacement include mechanical damage from impacts, cracked or broken glass, motor failure due to wear or water ingress, and cosmetic deterioration such as paint fading from UV exposure. The painted cover on this unit shows signs of fading, which is cosmetic but can affect appearance.

Replacement Procedure (General Guidance)

• Park Vehicle On Level Surface And Ensure Ignition Is Off.
• If Mirror Is Electrically Operated, Disconnect Battery Before Work To Avoid Short Circuits.
• Remove Interior Door Trim/Triangular Trim Piece To Access Mirror Mounting Nuts.
• Support Mirror From Outside, Unscrew Mounting Nuts, And Carefully Pull Mirror Away From Door.
• Disconnect Wiring Harness (If Present) And Remove Old Unit.
• Fit New Mirror, Connect Harness, Tighten Mounting Nuts To Manufacturer Torque Spec, And Refit Interior Trim.
• Test All Mirror Functions (Adjustment, Heating If Applicable) Before Completing Reassembly.

Installation Recommendations

• Follow Manufacturer Procedures And Torque Specifications When Tightening Mounting Nuts.
• If The Unit Is Electrically Operated, Reconnect The Battery Only After Wiring Is Secure To Prevent Electrical Damage.
• Check Door Seal And Connector For Signs Of Water Ingress; Apply Dielectric Grease To Connectors If Needed.
• Replace Fasteners If They Show Corrosion Or Damage To Ensure A Secure Fit.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1; Peugeot 107
• Product Codes: 87910-0H010; 87910-0H011
• Additional Numbers: 8153YS

Why This Part Fails Most Often

Exterior mirrors commonly fail due to external impacts (parking knocks, road debris), long-term exposure to sunlight causing paint fading and plastic embrittlement, and ingress of water leading to motor or connector corrosion. Mechanical wear of the adjustment mechanism over many cycles can also cause loss of function.

Final Notes

Check the photos for the exact cosmetic condition before purchase. Using the OE product codes (87910-0H010, 87910-0H011, 8153YS) in searches will help you confirm fitment and speed up parts identification. Order now to restore safe visibility and vehicle appearance.

Discover a reliable left red mirror designed for Citroën C1 and Peugeot 107 models, ideal for those seeking a high-quality replacement part for their vehicle. This driver’s side mirror provides a clear and undistorted view, which is essential for your safe driving. With its specific design and red color, it perfectly blends with the original look of your car, remaining functional and aesthetically pleasing. With this mirror, you not only gain a practical but also a visually appealing addition to your vehicle.

Technical Information:
Manufacturer: Original PSA part for Citroën and Peugeot.
Model: Specifically designed for Citroën C1 and Peugeot 107.
Product Codes: 87940-0H010, 87940-0H011, 8153YW.
Additional Numbers: These mirrors are recognized under OEM numbers, simplifying searches and ensuring compatibility with your vehicle.

Replacement parts like this mirror are key to maintaining the original look and functionality of the vehicle whenever the original part gets damaged. Replacing the mirror is simple and can be done by anyone with basic automotive skills, saving both time and service costs. Moreover, due to the frequent damage of mirrors caused by their exposed position, it is advantageous to have the option to quickly and effectively replace a damaged part.

Choose this mirror that combines safety, quality, and aesthetic value, ensuring that your vehicle is always ready to provide maximum performance on the road. With precise execution and excellent material quality, this mirror helps reduce driving risks by providing a perfect visual overview of the happenings behind the vehicle.

This replacement wing mirror fender cover is designed for the passenger side of the Citroën C1 and Peugeot 107. Ideal for professional workshops and DIY enthusiasts, the part restores the exterior finish and protects the mirror mounting area from dirt and moisture. Frequently searched by OE numbers 60117-0H020 and 8120Q7, this cover is a direct-fit component that helps you complete mirror repairs quickly and cleanly.

The cover sits at the base of the exterior mirror assembly and provides both cosmetic and protective functions. Made from durable automotive-grade plastic, it shields the mirror housing and mounting points from road debris, water ingress and small impacts. Replacing a damaged cover is a cost-effective way to renew the vehicle appearance without replacing the entire mirror unit.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1, Peugeot 107
• Product Codes: 60117-0H020, 8120Q7
• Other Numbers: Commonly Listed Under OE References 60117-0H020 | 8120Q7

Installation Recommendations

• Prepare a set of trim tools to avoid scratching paint or damaging clips.
• Carefully remove the mirror glass or open the mirror housing as required to access retaining clips or screws (refer to vehicle service manual for mirror disassembly sequence).
• Release the old cover by gently unhooking the plastic clips; avoid excessive force to prevent breaking surrounding trim.
• Clean mounting surfaces and check clip retention tabs; replace any broken clips before fitting the new cover.
• Clip the new cover into place until all fasteners engage; reassemble the mirror glass and verify correct operation of mirror adjustment and folding functions.

Why The Part Most Commonly Fails

• Impact Damage: Scrapes or knocks from parking or passing objects are the most frequent cause of cracks or broken covers.
• Clip Wear And Brittleness: Plastic clips can become brittle with age and fail during minor impacts or when removing the cover.
• Environmental Degradation: Prolonged UV exposure and temperature cycles can fade the finish and weaken the material.

This part is suitable for mechanics and competent DIYers familiar with exterior mirror removal. Use the OE references 60117-0H020 and 8120Q7 when searching to ensure a match with vehicle trim and mirror variants.

Overview

This OEM-style left fender cover (mirror-side wing cap) fits Citroën C1 and Peugeot 107 and is designed for professional workshops and DIY mechanics who need a direct-fit replacement. The part protects the mirror mounting area, contributes to the vehicle’s finish and aerodynamics, and hides the fixing points and wiring routing at the mirror base.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C1, Peugeot 107
• Product Codes: 60118-0H020, 60118-020, 8120Q6
• Additional Numbers: 60118 0H020 (alternative formats found in catalogs)

Fitment

Left Side (Driver Side). Specifically made for first-generation Citroën C1 and Peugeot 107 models where this trim piece covers the fender area around the exterior mirror base.

Function And Benefits

• Protects the mirror mounting area from dirt, moisture and minor impacts.
• Restores original appearance after collision damage or aging of the original cover.
• Direct-fit replacement that preserves correct alignment and reduces wind noise when fitted correctly.
• Helps protect mirror cabling and connectors routed through the mirror base.

Replacement Procedure

Removal and installation are straightforward for a trained technician or experienced DIYer. Typical steps:

• Open the door and, if accessible, remove the triangular inner trim panel covering the mirror base (use a plastic trim tool to avoid damage).
• Locate and release the retention clips or any hidden screws securing the outer cover. These covers are usually retained by snap-in clips; some variants may have small screws.
• Gently pry the old cover free, taking care not to scratch the paint. If clips are broken, remove any fragments and clean the mounting area.
• Align the new cover, press evenly until all clips engage, and reassemble the inner trim. Verify that the mirror operates correctly and that there are no gaps.

Recommended Tools: Plastic trim removal tool, flat screwdriver (protected with tape), clean cloth. If unsure about hidden fasteners, consult a workshop manual for your specific model year.

Installation Recommendations

• Always work on a clean, dry surface and protect surrounding paint with tape or cloth during prying.
• Replace any damaged or worn clips to ensure a secure fit; reused brittle clips commonly cause poor fitment.
• If painting is required, perform paintwork before final installation and allow full curing time. Test-fit the cover prior to painting.
• Do not force the part into place; excessive force can break clips or damage the mirror housing.

Why This Part Commonly Fails

Outer mirror/fender covers most often fail due to minor collisions or scrapes (parking impacts, door knocks, narrow streets). UV exposure and temperature cycles make plastic clips brittle over time, causing the cover to loosen or fall off. Improper removal with metal tools also leads to broken clips and scratches.

Durability And Maintenance

Under normal use the cover lasts many years. Inspect clips and the mounting area during routine bodywork or mirror replacement. After a collision, always check hidden fasteners and surrounding structure for damage before fitting the new cover.

Search And Identification

Customers often search by part number: 60118-0H020, 60118-020 or 8120Q6. Use these codes to quickly find the correct left fender mirror cover for Citroën C1 and Peugeot 107.

Order this direct-fit left fender cover to restore original appearance and secure the mirror mounting area — ideal for garages and independent mechanics seeking reliable replacement parts.